So I've read through the other responses, but I think I'm even more screwed... for starters, I get absolutely no response from the phone. When I plug it into my computer (Windows system, never worked with Linux), it does recognize something is plugged in, but then the drivers fail to install. There's no red LED indicator for charging/plugged in, power button does nothing, can't boot it into recovery or download... it basically acts like there's no battery in it, it's as dead as dead gets. Anyone have ANY clues on how to fix it?
This is not the sprint s3 section. This is the i9300 international s3 section. Any advice we give could easily be wrong.
Please use the /!\ button to request a mod move your post to the correct location.
Related
So, heres my problem. I have 2 samsung fascinates. I screwed one up a while back and was able to pull it back together and get it into ICS on CM9 with all the proper files using Odin.
I recently got a second samsung fascinate and was attempting to flash the same files, through Odin, but was having trouble.
I was able to get CWR (I believe it was voodoo) onto the phone, but once in recovery mode and having cleared all cache's, wiped files, and factory reset, I still could not successfully instal the files from the SD card (the same ones that worked on the 1st fascinate)
SO
I downloaded another version (or so I thought), Pushed it through Odin, Odin said it passed and auto restarts the phone. The phone never comes back on.
In hindsight think that CWR somehow ended up being deleted from the phone (if thats possible without doing it on purpose) before what was pushed by Odin was actually pushed. The file might have been wrong, im not sure, I will post up the exact file name when I get home.
At this point, the phone is completely unresponsive,. No holding the volume, plugging it in, putting the battery in. Jig doesnt work, Heimdall Doesnt work, Fastboot doesnt work. No download mode, period. No lights, no vibration. Tried multiple batteries, tried assuming the screen was bad, tried multiple cables, tried plugging into wall and computer. Nothing.
Mac will not notice the device at all once its plugged in, however, PC notices and starts to wig out. I have to hold the power button down, while its plugged into the computer to allow for it to search for drivers
The driver is SEC S5PC110 TEST B/D notification.....I feel like this is for a phone other than the fascinate.
Either way, I try to download fascinate drives, or the driver its calling for, both being unresponsive.
Am I completely screwed? Or is the questions more that I found myself at the point the I have either deleted what was deemed "Un-deleteable" or do I need to take the board out and get a soldering iron?
Also, I know a developer, I have taken it to him and he looked at it and scratched his head......hopefully someone has some sort of solution. Thanks
What file did you try to flash?
I9100_APBOOT_I9100XXKP2_CL17109_REV02_eng_mid_ship.tar
This was the file I flashed. Again, in hindsight and based on what I was reading in the forum, it looked good. I have no idea what it actually is, and therfore should not have flashed it. But I was in read and repeat mode, so I didnt question much. If I can track down the exact thread I was in I will post it up as well.
Philveatch said:
I9100_APBOOT_I9100XXKP2_CL17109_REV02_eng_mid_ship.tar
This was the file I flashed. Again, in hindsight and based on what I was reading in the forum, it looked good. I have no idea what it actually is, and therfore should not have flashed it. But I was in read and repeat mode, so I didnt question much. If I can track down the exact thread I was in I will post it up as well.
Click to expand...
Click to collapse
thats what happens when you flash files for another
device to this one. there is a guide in the general section that has everything you needed. hopefully next time you do a bit more research before you get flash happy. at this point unbrickable mod is your only way out and that requires some microscopic soldering skills.
It looks like you flashed a bootloader for the Galaxy S2.
Interesting. It was in a fascinate forum talking about how to add ics to a fascinate phone.....hmm.
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
machv5 said:
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
Click to expand...
Click to collapse
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
machv5 said:
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
Click to expand...
Click to collapse
I tried a jig and that didn't work. There must be some way of getting the device to give up on completing a task i no longer can give it due to ODIN being shut off.
Why is it that the "how to root/unlocks" never have the "if x fails then do these steps etc..." Had the how to had "pull the battery before disconnecting USB and don't reset or shut off ODIN" I wouldn't be in this mess. I realize that it's user beware but a few important steps like that in case of a fail would go a long way to you guys not shaking your heads. Instead of "silly nub hahahahahaha". No offence but I get that a lot and try to remember that when I teach someone how to use a computer. I am new at phones not at everything.
Further Developments Please can someone help?
I was giving someone a new memory card and they had a Samsung SGH-I896 it has an EB575152VA battery and the one I have the T959D has an EB575152VU battery. I exchanged my battery for hers by accident somehow and when I plugged my phone in it didn't go to the phone triangle computer logo screen it booted to recovery and said it couldn't charge the battery and kept rebooting to recovery. I got my battery back and it booted back to the phone triangle computer logo again. Grrrr....
The other thing I saw while the recovery screen was an error message that said
Code:
E:/data/fota not accessible
(may not be 100% accurate I don't have the battery to check right now but can get it again if need be) anyway I now see that there may be some light at the end of the tunnel. i have the correct stock firmware for the device I tried flashing it while in recovery but the phone kept rebooting before anything got done. My question is how can I get the dang phone to stop asking for Odin and go to recovery so I can flash stock firmware and ROM back to it? As I cannot as far as I know give it what it wants because I reset Odin and nothing seems to see that the phone is connected to the computer. I am going to try the other battery on a full charge to see what that does.
I am new at all this and want to get it fixed. I cannot afford to send it off to a service center and besides that I want to do it myself as I want to become a developer and droid technician. I would gladly donate to anyone but am still trying to get Google to accept my pay-as-you-go credit card and I don't have PayPal either. Which is really frustrating when it comes to giving back. I posted a Q&A on how to without PayPal or CC but as of the last time I checked no one has gotten back to me about it.
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
MultipleMonomials said:
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
Click to expand...
Click to collapse
That is correct. If you think that my idea below is a bad one or if I downloaded the wrong firmware package please let me know and /or you have a fix that will work? ty
I have though come up with an idea that may work. I am going to charge the "wrong" battery in erm the right phone lol and then use it to trick the device into booting into recovery instead of the cellphone triangle computer (CTC, for want of a better acronym) The I896 battery ends in a V not an ? (sorry can't rem don't have it on me) from the I896 model I think it is, plugging it into USB with the power off sends it to recovery with the "battery cannot be charged " message instead of the CTC screen.
I tried it but the charge in the battery was too low and rebooted. I am hoping that with a full charge (as long as I don't power on the phone first as this will make it go to CTC logo again.
I am hoping that I can install the update.zip that I made by first unzipping the T959UVJFD_firmware.tar I downloaded then unpacked and then repacked into an update.zip as I don't think that it will read the package as a tar file and if it's not called update.zip The recovery is still stock. If I get the phone working I am not going to try unlocking and rooting it again. I will just post two separate adverts one as a carrier locked device and the other one (higher of course to cover buying the unlock from Telus) as carrier unlocked and then I will buy the unlock code if the blah blah you get the drift. sorry for rambling on.
oh and I can't rem if I said this or not, In recovery it "E:/data/fota not accessible" I don't know what that means yet I have been busy with other things and haven't looked it up yet.
Since you can get into at least some version of recovery, your bootloader is intact and you should be able to unbrick it. You ought to be able to get into download mode using a download jig. You can get one on ebay for a few bucks or you can make one yourself. There's a guide floating around here somewhere that lets you make one from a microusb cable.
Posted from my Galaxy Tab with CM10
Hello, today I got a Samsung Galaxy S2 from a friend. I'm not sure how to identify exactly which model, but it's american and doesn't have the oval home(?) button at the bottom.
I've done rooting and flashed roms before onto Samsung phones, and I haven't had this problem.
The phone started off completely stock, no modification whatsoever. Then I downloaded a kernel with clockworkmod on it, and it wouldn't boot again. It would get stuck in the bootloop with the little yellow caution symbol. After trying several other things I was able to flash another kernel onto it, however, something happened in ODIN and it disconnected. Ever since the only thing it does is the blue LED comes on. I cannot access download mode, or the recovery I was going for. When it's turned on it doesn't even have a bootloader.
Thank you very much for the help.
Your problem starts at 'I'm not exactly sure what model it is'. If it has no home button and does have a blue Led, it's most certainly not an i9100. I'm willing to bet you've been flashing the wrong firmwares all along.
Now that your phone disconnected during an Odin flash, it's done for. When you plug it in to the charger, does it get hot? If so, motherboard replacement.
Sent from my GT-I9100: Powered by Dorimanx, running RootBox
Remove the battery and check the model.
Then go to the device's forum or ask the mods to move it 98% chance this is the wrong place for you.
Sent from...this is not even my S2
Hey guys, I'm really hoping someone can tell me of a solution Ive not though of.... So Ive got the note 3 from sprint. currently had 4.4.4. I shoulda just left wellenough alone, I realize, But I tried to flash just a modem via mobileOdin and upon reboot, it will say "recoverybooting" and then I get the blue android. Thats all. This was just over 6 hours ago I did this and Im dead in the water, Ive SEARCHED the internet high and low and there are other facing similar problems, but it seems like every mishap Ive read about EVENTUALLY gets fixed. This just will not do anthing with any button combo as far as recovery and/or download mode. I cant access download mode either. recovery never actually boots, just a forever frozen blue android.. Now, with the phone attached via usb to my PC, it DOES see it as COM7, BUT REGARDLESS what ive tried it just remains at the "recovery booting" spot then blue android until I pull the battery again. Please HELP.! IF ANYONE HAS ANY SUGGESTIONS I would be just delighted if you may have some other approaches to this matter. THANKS! Please let me know iTs DESPERATE!
Zscott87 said:
Hey guys, I'm really hoping someone can tell me of a solution Ive not though of.... So Ive got the note 3 from sprint. currently had 4.4.4. I shoulda just left wellenough alone, I realize, But I tried to flash just a modem via mobileOdin and upon reboot, it will say "recoverybooting" and then I get the blue android. Thats all. This was just over 6 hours ago I did this and Im dead in the water, Ive SEARCHED the internet high and low and there are other facing similar problems, but it seems like every mishap Ive read about EVENTUALLY gets fixed. This just will not do anthing with any button combo as far as recovery and/or download mode. I cant access download mode either. recovery never actually boots, just a forever frozen blue android.. Now, with the phone attached via usb to my PC, it DOES see it as COM7, BUT REGARDLESS what ive tried it just remains at the "recovery booting" spot then blue android until I pull the battery again. Please HELP.! IF ANYONE HAS ANY SUGGESTIONS I would be just delighted if you may have some other approaches to this matter. THANKS! Please let me know iTs DESPERATE![/QUOTE
Have you tried removing the battery for a couple of minutes ? If you have read a couple of my threads on NH7 4.4.4, once your there downgrading anything is risky. Here is a link to read http://forum.xda-developers.com/note-3-sprint/help/4-4-4-download-mode-t2877528 . Here is a link for a recovery from a hard brick, by creating a boot image and then copy and paste it on a sdcard http://www.rom-central.com/showthread.php?87-GUIDE-HOWTO-Recover-from-a-HARD-BRICK-N900V-NC2-NC4 there are several sites on this type of fix, I just can't remember where they are. However, I do have something that may help, on one of those sites there was a link for someone who has already created a SM-N900P Unbrick img for Sprint and I downloaded it just in case. Here is the link http://www.mediafire.com/download/l6q1152x5c9d4h6/N900PUnbrick my copy. From what I understand you need to format/erase your sd card then copy and paste the unbrick img to the sd card from a PC. Pull the battery and install the sdcard back in the device, then try and boot the phone into download mode. Here is another link http://forum.xda-developers.com/showthread.php?t=2439367 I have not had to do this so you will have to do a little reading to be sure.
Click to expand...
Click to collapse
The fact that it still shows up as COM is a good sign.
Get a hold of ODIN 3.07+ I had issues with ODIN 3.06.
Here are a few things to try:
1.Take the battery out and hold all the buttons that you normally would to boot into recovery. While holding all the buttons, plug in the usb cable. If it boots into download mode, awesome, just put the battery in before you flash.
2. .Take the battery out and hold all the buttons that you normally would to boot into recovery. While holding all the buttons, plug in the battery. Hopefully it will boot into download mode.
3. try different cables, remember regular micro usb cables work with the note 3.
Make sure you put the modem file in the phone slot, and the rom/system tar in the pda slot.
Best of luck
Thanks for the suggestions guys! Iguess time is just what it needed. I actually fell asleep after trying for so long, and when I woke up I decided to try once more and VOILA... It let me into download mode! Went back to stock and have since been rebuilding . ha! Thanks again
HELP HARD BRICKED MY GALAXY S3 GT-19300 4.1.1 PLEASE HELP
I hard bricked my galaxy S III while trying to recover accidentally deleted photos from the gallery. I should have forgotten about the pictures and move on. I am hoping some of you geniuses here can help me figure out how to get my phone back. Galaxy is not under warranty. I want to say upfront that I am way out of my league and will probably say stupid stuff, please forgive me.
On day 1: I used skipsoft toolkit to root my phone. Before the root I did try to back up my phone. I chose #2 backup/restore your device. I do find some files; however, windows is unable to open them. After that, I chose #3 root options. Then, option #2 Flash recovery, root and busy box. Then, option #3 TWRP Touch recovery 2.7.1.0. Then, option #2 SuperSU 2.46 by chainfire. Then, option #2 sideload root file via custom recovery. I must say that I have no idea what all this means. Everything was fine and phone worked well.
Day 2: I followed this wonderful video at YouTube called
How to recover deleted Pictures and files off your INTERNAL memory on Samsung Galaxy Phones. Can put link because don't have 10 post yet. Sorry. However, I skipped the part about rooting and busy box because I use skipsoft to do those procedures. I performed all the procedures as directed, however when I got to Cygwin I couldn't get this program to work. I'm running windows XP. When I typed in util-Linux I only got 2 categories; however he got about 5. Stupidly, I continued with the process. I connected my phone in adb mode. I typed Adb then I typed adb start-server and pressed enter. Then I closed it out as he instructed. As I said earlier I could never get Cygwin to run. I installed it and uninstalled it several times, but had no luck. I disconnected my phone from the USB cable. Everything was working fine. When I went to bed the phone was fully charged, so I did not charge it. Upon awakening, the phone was DOA (dead on awakening) (normally dead on arrival).
The galaxy S III will not go into recovery or download load. It will not do anything, does not vibrate or have lights when charging. I tried all of the button combinations: Power, Home, volume down; power, home, volume up; Power, Home, volume down and volume up. Removed the battery, then tried all these combinations again. Remove the battery, sd card and SIM card and tried button combinations again. Removed battery, SIM card, and SD card and held the power button down. Plug the phone in via USB and tried all button combinations. None of these things worked. Tried a friend's Galaxy S III battery in my phone, dead. Tried my battery in their phone, and their phone dead. Tried friend's battery with all combination of buttons still no signs of life. Computer does not find phone.
I suppose that I hard bricked my phone or did something else happen? What about the backed up information on my computer, is there a way to retrieve it? Can someone please give me specific directions on unbricking my phone? I read somewhere on this forum that you could copy a bootloader from another phone to an SD card and copy that to your phone. However, I cannot take the chance of bricking someone else's phone. So if someone has some suggestions of how I can unbrick my galaxy S III I without JTAG or a jig, I would greatly appreciate it. Thank you!!!
You can't do anything without a usb jig, also you need a new battery.
You should take your phone to a repair centre and ask them if it worth repairing, there is no simple answer to the problems you created.
Thank you for replying!!! I took my phone today to a shop. They don't do jigs or JTAGs and couldn't offer much advice. Where I live is a small town and trying to find someone knowledgable here has been almost impossible. So I'm still in the same boat. I think I might try to order a jig and try it myself.
You did this:
Purpleandgold said:
HELP HARD BRICKED MY GALAXY S3 GT-19300 4.1.1 PLEASE HELP
On day 1: I used skipsoft toolkit to root my phone. ... I must say that I have no idea what all this means. ...
Click to expand...
Click to collapse
And now You wanna mess with jig?
Good luck...
martinsskutans said:
You did this:
And now You wanna mess with jig?
Good luck...
Click to expand...
Click to collapse
At this point I don't think there is a great deal to lose....but yeah good luck
It would be better to pay this money (price of jig) to someone who knows what to do - it's more realistic...
martinsskutans said:
It would be better to pay this money (price of jig) to someone who knows what to do - it's more realistic...
Click to expand...
Click to collapse
Do you know someone who would look at it for $2 or $3? But I agree find someone who might be able to fix it