[Q] nokia lumia 800 wont come on now - Nokia Lumia 800

Hi,
Updated my lumia to the latest 7.8 update and all was working fine. I tried to check what boot loader I had and connected to the laptop. The phone was switched off and I tried to enter the boot loader mode but nothing happened. Now I try to power on the phone and nothing.?
Tried soft reset and hard and it don't do a thing.. Please if anyone can help me..
Thanks

Bump bump anyone?

Same case,, when my lumia 800 run out of battery it goes off, then i tried to charge but nothing happens until right now. It was dead I guess with 'accidentally' power charge
Sent from my C2105 using Tapatalk 4

So how do I get it on? I've left it on charge and nothing.. How did you get yours working?

I can't charge mine at all. It either freezes on the Nokia logo, or comes up with the battery icon (red) and sits there doing nothing.
I've tried a range of chargers, from low amp ones to high amp ones. Nothing.

Related

[Q] Atrix Will Mot Boot

I have an Atrix that I bought from someone.
Here's what it does: if I press the power button, the green light comes on in the corner for 2 seconds and then goes back off. Nothing on screen.
If I plug it in via usb, the green light will come on for 15 minutes like it is charging and then go off. No screen action.
If I plug it into a wall charger, it says "Failed to boot x1000" Entering recovery, battery too low to flash.
Now I tried this with 3 different batteries, same result. Anyone have any clues?
seems a hard brick ... like here but if the battery plugs from the cell doesn'st seems to be working u gonna to try with warranty or think about buy a new phone... hope u can solve ur problem
Leave for 24hrs on charge if still not work then its borked
Sent from my MB860 using XDA Premium App

Lumia 800 Bricked due to battery drain ???

Hi
I ran out of battery while using my lumia 800. I tried connecting to both PC and Laptop and it just vibrates without booting. Kept it charging for hours , but still it wont boot up. If I press and hold power button it just vibrates. Just the black screen and no Nokia or the battery symbol.... Tried soft as well as hard reset but it wont work too. If I plug in the device it gets detected as some Qualcomm CDMA device. Tried this guide but the phone wont get detected in Nokia Care suite as well... and I dont have the original Lumia charger with me as well.. so charging only from the original USB cable
Any help / pointers would be really appreciated.
Thanks in advance
Send it for service if its in warranty they may repair it.
I guess its a problem with your screen. But you should give it to the store.
Sent from my GT-S5570 using xda app-developers app
starbriganza said:
Send it for service if its in warranty they may repair it.
I guess its a problem with your screen. But you should give it to the store.
Click to expand...
Click to collapse
it is a developer device and I really doubt I will get any replacement... Thanks for the help though
Though I strongly feel , it is not a screen issue. Any other ideas?
Thanks
xgt001 said:
Though I strongly feel , it is not a screen issue. Any other ideas?
Thanks
Click to expand...
Click to collapse
I searched on Nokia's website and found out many people had the same problems. Turns out that you will have to use an original wall charger by Nokia for Lumia 800 to charge it as it has a higher ampere rating than most wall chargers.
As you have completely drained your battery you will have to charge it without trying to boot it for maximum two hours. Most peoples phones started working after this.
Hope for the best.
starbriganza said:
I searched on Nokia's website and found out many people had the same problems. Turns out that you will have to use an original wall charger by Nokia for Lumia 800 to charge it as it has a higher ampere rating than most wall chargers.
As you have completely drained your battery you will have to charge it without trying to boot it for maximum two hours. Most peoples phones started working after this.
Hope for the best.
Click to expand...
Click to collapse
The Lumia 800's charger is 1A. Most modern smart phone chargers are the same so just make sure you are using one of that rating or maybe even higher (I think the 710 charger is 1.2A).
starbriganza said:
I searched on Nokia's website and found out many people had the same problems. Turns out that you will have to use an original wall charger by Nokia for Lumia 800 to charge it as it has a higher ampere rating than most wall chargers.
As you have completely drained your battery you will have to charge it without trying to boot it for maximum two hours. Most peoples phones started working after this.
Hope for the best.
Click to expand...
Click to collapse
Hi, I am on it now, fetched myself a Nokia charger. I just hope it works Thanks a lot!
xgt001 said:
Hi, I am on it now, fetched myself a Nokia charger. I just hope it works Thanks a lot!
Click to expand...
Click to collapse
It could also be a cable problem. Be sure you get the charger together with an original usb-cable.
Hi,
I charged the lumia whole night with the original charger and its still not booting. It vibrated after like some 10 minutes I put it to charge and I waited for it to boot, but alas nothing happening
xgt001 said:
Hi,
I charged the lumia whole night with the original charger and its still not booting. It vibrated after like some 10 minutes I put it to charge and I waited for it to boot, but alas nothing happening
Click to expand...
Click to collapse
Hard Luck buddy.
:\
connect it to an xbox
i had the same problem, and i solved it this way...
xgt001 said:
Hi
I ran out of battery while using my lumia 800. I tried connecting to both PC and Laptop and it just vibrates without booting. Kept it charging for hours , but still it wont boot up. If I press and hold power button it just vibrates. Just the black screen and no Nokia or the battery symbol.... Tried soft as well as hard reset but it wont work too. If I plug in the device it gets detected as some Qualcomm CDMA device. Tried this guide but the phone wont get detected in Nokia Care suite as well... and I dont have the original Lumia charger with me as well.. so charging only from the original USB cable
Any help / pointers would be really appreciated.
Thanks in advance
Click to expand...
Click to collapse
this guy can fix your phone with JTAG .
http://www.ebay.co.uk/itm/Boot-Repa...K_Replacement_Parts_Tools&hash=item416ea4e9be
xgt001 said:
Hi
I ran out of battery while using my lumia 800. I tried connecting to both PC and Laptop and it just vibrates without booting. Kept it charging for hours , but still it wont boot up. If I press and hold power button it just vibrates. Just the black screen and no or the battery symbol.... Tried soft as well as hard reset but it wont work too. If I plug in the device it gets detected as some Qualcomm CDMA device. Tried this guide but the phone wont get detected in Care suite as well... and I dont have the original Lumia charger with me as well.. so charging only from the original USB cable
Any help / pointers would be really appreciated.
Thanks in advance
Click to expand...
Click to collapse
This is because emptying the battery you must remain connected to the PC and try from time to time on appuier volume down + camera button + power button getting started one reinitialization of the factory default
Warning: the method of the buttons will cause the loss of all data
Try this!
Quoted from discussions.nokia.com/t5/Nokia-Lumia/My-Lumia-800-won-t-turn-on-anymore/td-p/1282979
You can connect the Lumia to the original charger or connect it to a PC using the supplied USB cable. In that case make sure Zune is running on the PC.
Click to expand...
Click to collapse
my nokia 800 is bricked
i tried to recover my firmware using nokia care suite 5 but it gives me the following error :X
what does this mean?
please help asap!
DTL Connection: Could not connect to media. DTL Back-End error code = 0x8400A403. DTL Back-End: Driver initialization failed. DCM status code = 0x84004424, Common USB DCM: USB preparation failed, last error code = 0x8007000D. .
Exception:
System.Runtime.InteropServices.COMException (0x8400AC35): DTL Connection: Could not connect to media. DTL Back-End error code = 0x8400A403. DTL Back-End: Driver initialization failed. DCM status code = 0x84004424, Common USB DCM: USB preparation failed, last error code = 0x8007000D. .
at FuseLib.DtlConnectionClass.ConnectToMedia()
at Nokia.CareSuite.PlugIns.WezenRecovery.RecoveryConnectionManager..ctor(FuseLoader fuseLoader, IConnection connection, UserInteractionDelegate userInteractionDelegate)
at Nokia.CareSuite.PlugIns.WezenRecovery.RecoveryDialog.RecoveryDialogModel.Flash()
at Nokia.CareSuite.PlugIns.WezenRecovery.RecoveryDialog.RecoveryDialogModel.<HandleDownloadVariantPackageCompleted>b__a(Object state)

[Q] Phone responds to nothing, not even a charge cable.

I wasn't sure where to post this, since my phone doesn't have a specific forum... I have a Motorola Razr V XT885 running Android 4.0.4 on Virgin Mobile. For the last week it has been rebooting randomly. Normally this would be a minor annoyance, but it has been taking 4 hours to finish booting back up. Today it just died, while charging.
I use the charger that came with the phone and I have tried 2 others, nothing at all. If I plug the phone into my computer it recognizes it and installs drivers. But I get no indication that the phone actually works. No LED light, no phone off charging screen, nothing. I have tried just turning it on, I have tried the power +volume button and I have tried removing the SIM and SD cards. So far nothing has worked....
Can anyone give me any indication as to what might have happened to my phone?
Might be a hardware problem. Take it ti tech service... From what i hear it seems it's not software related...
Sent from my XT910 using xda premium
Got it to power on last night. It's now been stuck at the boot up screen for 8 hours.... If it's a hardware problem I'll just replace it, I've been looking for an excuse to get a new phone anyway.

Nokia Lumia 920 wont turn on at all

Hi All,
Had a standard Nokia Lumia 920. Did a reset on the phone and it got stuck on the gears screen, so I left it over night. Woke up to find phone off. Started it up and went to Nokia logo then the 3 network logo and then nothing so I plugged it in and downloaded Nokia software updater for retail and it started to update the phone. but failed about half way through, went to try again and now the phone will not turn on. I have left it all night plugged in to a wall charger. Tried power + volume down, power + volume down + camera trick and nothing, no vibration.
If I plug it into my laptop sometimes it will come up and say "USB has malfunctioned"
Has anyone got any ideas/suggestions.
thanks in advance
Crampo
Hold power button for at least 15 seconds, Other than that its a return to Nokia job.
I am having the same problem before then I switch to samsung galaxy nexus, and I work well all the time.
basic rule: if phone turn off because battery, dont try and try turning on because mighty be bricked... plug charger, (and if not turning on) wait 5 minutes and do soft reset (Volume minus and power button together)
if phone bricked use this solution
http://mynokiablog.com/2013/10/11/how-to-easily-fix-the-lumia-reset-spinning-cogs-at-home/
how about dead usb flashing using NCS ?
bhanuprasad1981 said:
how about dead usb flashing using NCS ?
Click to expand...
Click to collapse
NCS or NSU for retail.. is same thing but NSU is easier and more for beginners
Similar Problem
I have the same problem with my Lumia 920 - RM 821.
Already tried all the tools of Nokia, but without results, no vibrate and no image.
My Lumia has stopped completely and I can not fix it.

[Q] Lumia 800 won't turn on

Hey there folks, I've recently updated the firmware of my Lumia via PC, after it was performing a reboot it never booted again. I don't remember if my battery was drained but it certainly wasn't less than 10%
I've plugged it into the wall charger for hours and tried to charge it via PC too but with no results, I've also tried all the button combos, no hope ... The phone doesn't vibrate or turn on or do anything, it's just a brick now
Can somebody suggest me a solution ?

Categories

Resources