Related
Hi everyone. Can anyone help me figure out what's the problem that i cant boot into CWM. I have Neo MT15i running FINE with stock rom ICS .587, locked bootloader and rooted. I also installed x-Parts as well as CWM 5.5 and busybox 1.20. But my problem is that my phone just cant boot into CWM recovery no matter what i did either press and release volume - continuously when "SONY" logo appears, or using x-Parts function to boot into recovery. It just ends up stuck at "SONY" logo (I waited for about 10 minutes but no respond)
You have to press Back button while booting from Sony Logo to boot into CWM.
svprm said:
You have to press Back button while booting from Sony Logo to boot into CWM.
Click to expand...
Click to collapse
When should i start press the back button? during or before Sony Logo appear?
During Sony Logo appearing.
svprm said:
During Sony Logo appearing.
Click to expand...
Click to collapse
nope, cant boot into recovery also, i still stuck at Sony Logo just like usual ==" is it the kernel problem? shud i upload a screen shot of my kernel version?
Try installing Recovery again by this method:
http://forum.xda-developers.com/showthread.php?t=1364509
i root-ed my neo few weeks ago and everything worked normal until i changed heap on VM Heap Tool ... i chandeg it from 52 to 40 and when i booted mobile phone it's stuck on sony logo... it's kinda looping all the time and i can't turn on my mobile at all, i must take battery out to stop that logo appearing and disappearing
Sir please help me
When I flash new Rom in Xperia neo v.Every time my clockwork recovery deleted
xange said:
Hi everyone. Can anyone help me figure out what's the problem that i cant boot into CWM. I have Neo MT15i running FINE with stock rom ICS .587, locked bootloader and rooted. I also installed x-Parts as well as CWM 5.5 and busybox 1.20. But my problem is that my phone just cant boot into CWM recovery no matter what i did either press and release volume - continuously when "SONY" logo appears, or using x-Parts function to boot into recovery. It just ends up stuck at "SONY" logo (I waited for about 10 minutes but no respond)
Click to expand...
Click to collapse
same problem for me...xperia neo v
Hello.
I have a similar problem, if not identical. I rooted my MT15i today hoping to install a custom ROM I found in this forum.
Everything went fine. I rooted the phone and installed Clockwork Mod Recovery properly.
Then, I downloaded the rom .zip, placed it in /sdcard, made a backup of my current system, wiped data/ full reset and installed the ROM with SUCCESS, as it said in the log.
After that, I rebooted the phone and now it keep stuck in the "SONY" boot screen and won't change no matter what I do.
But I think I know why did this happen. I was following a tutorial found in another site. There was listed only to wipe data and full reset, and not to wipe danvik and cache, as I came to read after I was stuck in the boot screen.
The problem is that now I can't even get to the Clockwork Mod Recovery screen, even if I start the phone holding volume down button (or reset, or any other button the phone might have).
The only thing to do is removing the battery. After starting again, it gets stuck again in SONY screen.
When I plug the phone into my PC, nothing happens. It doesn't get recognised.
It only turns on and stops at the SONY screen again.
I wonder if there's a way to access the Clockwork Mod Recovery menu or some way to return the phone to the stock settings.
Or is it a possible brick?
Thanks for the help already.
Ps.: sorry for the long post.
First of all don't worry your device is not broken
And not every custom Rom support locked bootloader
The reason you can't access cwm because you wiped data
I think you can restore your phone by reflash firmware using flashtool
Sent from my Xperia Neo V using xda premium
I can get the phone to conect to the PC in flashmode. I downloaded the stock firmware of Neo MT15i (v 4.1.A.0.562) and flashed it, but no luck. The phone keeps stuck in the SONY screen. Any ideas?
EDIT: actually, when I bought the phone, it came with Android 2.3, I don't remember the firmware version.
IagoMalta said:
I can get the phone to conect to the PC in flashmode. I downloaded the stock firmware of Neo MT15i (v 4.1.A.0.562) and flashed it, but no luck. The phone keeps stuck in the SONY screen. Any ideas?
EDIT: actually, when I bought the phone, it came with Android 2.3, I don't remember the firmware version.
Click to expand...
Click to collapse
It doesn't matter which android version you flash all should work
make sure you checked those boxes in flashmode
Wipe data
Wipe cache
Wipe apps log
No final verification
And just to know when you flashed the firmware. Does it completed successfully?
Sent from my Xperia Neo V using xda premium
monobianco87 said:
It doesn't matter which android version you flash all should work
make sure you checked those boxes in flashmode
Wipe data
Wipe cache
Wipe apps log
No final verification
And just to know when you flashed the firmware. Does it completed successfully?
Sent from my Xperia Neo V using xda premium
Click to expand...
Click to collapse
Well, I got the phone to boot. I was just trying to flash an incomplete firmware, I guess. I downloaded a new firmware I found in a rooting tutorial thread in this forum and flashed it. The phone is now working fine.
But now it's not rooted anymore. Maybe in the future I'll try to root and flash a new rom.
Thanks for the help, anyway. :laugh:
Never mind, but I suggest you unlock your bootloader if you would like to flash custom Rom
Sent from my Xperia Neo V using xda premium
IagoMalta said:
Hello.
I have a similar problem, if not identical. I rooted my MT15i today hoping to install a custom ROM I found in this forum.
Everything went fine. I rooted the phone and installed Clockwork Mod Recovery properly.
Then, I downloaded the rom .zip, placed it in /sdcard, made a backup of my current system, wiped data/ full reset and installed the ROM with SUCCESS, as it said in the log.
After that, I rebooted the phone and now it keep stuck in the "SONY" boot screen and won't change no matter what I do.
But I think I know why did this happen. I was following a tutorial found in another site. There was listed only to wipe data and full reset, and not to wipe danvik and cache, as I came to read after I was stuck in the boot screen.
The problem is that now I can't even get to the Clockwork Mod Recovery screen, even if I start the phone holding volume down button (or reset, or any other button the phone might have).
The only thing to do is removing the battery. After starting again, it gets stuck again in SONY screen.
When I plug the phone into my PC, nothing happens. It doesn't get recognised.
It only turns on and stops at the SONY screen again.
I wonder if there's a way to access the Clockwork Mod Recovery menu or some way to return the phone to the stock settings.
Or is it a possible brick?
Thanks for the help already.
Ps.: sorry for the long post.
Click to expand...
Click to collapse
Flash a new kernel with cwm recovery using flashtool (by Doomlord). wipe cache, dalvic cache, syste, data, reset factory in cwm recovery.
install a new rom having SAME ANDROID VERSION as ur kernel.
thats it!! REBOOT!
NEO V doesn't boot
I have rooted my Xperia NEO V by installing a custom rom. Now my problem is
1. it is not booting. whenever I want to start it sony logo appears and doesn't go.
2. I tried to flash it but the device is not even recognised by PC
3 I tried to boot it into recovery mode but pressing power button and volume down button and releasing it, pressing power button and back button, and numerous methods, it didnt go beyond sony logo.
4. tried Dooms lord but it also didnt recognise the device. Kept on waiting for the device.
5 Everytime I have to take out the battery and then insert it as it is not being switched off from power button.
6. as soon as I connect it to charging the Sony Logo appears.
7. When I start it after putting the battery again, without connecting it to charging point, it vibrates on starts as it used to earlier, but then doesnt go beyond sony logo.
Is my phone bricked? Please help. Lots of thanks in advance to all the developers.
manojdang2003 said:
I have rooted my Xperia NEO V by installing a custom rom. Now my problem is
1. it is not booting. whenever I want to start it sony logo appears and doesn't go.
2. I tried to flash it but the device is not even recognised by PC
3 I tried to boot it into recovery mode but pressing power button and volume down button and releasing it, pressing power button and back button, and numerous methods, it didnt go beyond sony logo.
4. tried Dooms lord but it also didnt recognise the device. Kept on waiting for the device.
Is my phone bricked? Please help. Lots of thanks in advance to all the developers.
Click to expand...
Click to collapse
What rom were you trying to install? Is your bootloader unlocked? And you can try flashing stock firmware with flashtool to revive it...
Sent from my Xperia Neo V using xda app-developers app
NEO V doesn't boot
Hi,
I installed following in my Neo V MT11i
Super Jelly Bean v6.0(16th august 2013)
best kernel for sjb(fusion 5.4)
debloated updated gapps
using following link . http://forum.xda-developers.com/showthread.php?t=2108632
I am using Kernel_Flasher_v2.0 to flash the image kernel. It recognises the device and shows that the kernel is flashed. But the device doesnt reboot. I root the phone through eroot software. Then I install X parts and go into recovery mode.
I wiped the phone fully, including system format.
Please guide where I am missing some crucial step.
I am using windows 8
Thanks in advance
manojdang2003 said:
Hi,
I installed following in my Neo V MT11i
Super Jelly Bean v6.0(16th august 2013)
best kernel for sjb(fusion 5.4)
debloated updated gapps
using following link . http://forum.xda-developers.com/showthread.php?t=2108632
I am using Kernel_Flasher_v2.0 to flash the image kernel. It recognises the device and shows that the kernel is flashed. But the device doesnt reboot. I root the phone through eroot software. Then I install X parts and go into recovery mode.
I wiped the phone fully, including system format.
Please guide where I am missing some crucial step.
I am using windows 8
Thanks in advance
Click to expand...
Click to collapse
After flashing kernel go to recovery... From there flash rom... It doesn't boot because you flashed a jb kernel on a non jb rom... Flash kernel... Turn on keep pressing volume down button... It will go to recovery... Do wipes... Install zip...
Sent from my Xperia Neo V using xda app-developers app
Well Hi,
I've been trying to flash a rom on my phone yesterday, and I've unlocked the bootloader and installed CWM Touch v5.5.0.4, I then tried to flash TheBrainsRom v10 but my xperia was stuck in bootloop, it opened the sony splash screen, then a nexus splash screen then a sony splash screen and etc. So now, I tried solving the problem by flashing this kernel on http://forum.xda-developers.com/showthread.php?t=2028139 "Other method to root just flash this kernel (B54) via fastboot and you are rooted : here" And that didn't work out too well, i'm now stuck in a bootloop at the sony splash screen. But strangely enough, I can still access the cwm recovery.
As for my phone it's a sony xperia U (ST25i) 6.1.1.b.1.10
Thanks for reading this, and please help me if you can :S
youssefkiev said:
Well Hi,
I've been trying to flash a rom on my phone yesterday, and I've unlocked the bootloader and installed CWM Touch v5.5.0.4, I then tried to flash TheBrainsRom v10 but my xperia was stuck in bootloop, it opened the sony splash screen, then a nexus splash screen then a sony splash screen and etc. So now, I tried solving the problem by flashing this kernel on http://forum.xda-developers.com/showthread.php?t=2028139 "Other method to root just flash this kernel (B54) via fastboot and you are rooted : here" And that didn't work out too well, i'm now stuck in a bootloop at the sony splash screen. But strangely enough, I can still access the cwm recovery.
As for my phone it's a sony xperia U (ST25i) 6.1.1.b.1.10
Thanks for reading this, and please help me if you can :S
Click to expand...
Click to collapse
Did you do a full wipe via CWM?
mirost1 said:
Did you do a full wipe via CWM?
Click to expand...
Click to collapse
Yes, I did. :L
EDIT: I just saw that the recovery I'm using isn't for my firmware version... Should I flash an older version, even if this one works fine?
I did another full wipe, and reflashed the rom. But it's now stuck in the other bootloop the one that shows the sony splash screen, then the nexus splash screen.
By any chance, while installing ROM, did you wipe System ? I think thats the likeliest thing.
And dude, try flashing stock FTF with Flashtool It might help
Yeah flashing ftf solves everything
Sent from my ST25i using Tapatalk 2
Ok, I will do that, but how? And no, I didn't wipe System. Thanks for your help guys And if anyone can explain to me how to flash the stock ftf, please do.
Follow these steps
1) Start Flashtool
2) Click the Lightning icon then select your FTF
3) Exclude baseband if your device is STxxi and the firmware is for STxxa or viceversa
4) Press ok and start Flash. Then, after a minute or so, Flashtool will ask you to connect the device.
5) Turn off the phone. Connect the usb cable to the PC (not connected to Phone yet)
6) Holding down the "Volume Down" key, you connect the cable to your phone.
7) Give it a few seconds and a Green Light shows up. Then, flashing starts on Flashtool
8) Once flashtool starts flashing, you can stop holding down the Volume Key
9) Wait for the process to finish then unplug the phone and turn it on
That ought to solve your problems. The stock FTF can be found in Dev section of your phone. I'd recommend C.1.0 version as its newer
Min3r said:
Follow these steps
1) Start Flashtool
2) Click the Lightning icon then select your FTF
3) Exclude baseband if your device is STxxi and the firmware is for STxxa or viceversa
4) Press ok and start Flash. Then, after a minute or so, Flashtool will ask you to connect the device.
5) Turn off the phone. Connect the usb cable to the PC (not connected to Phone yet)
6) Holding down the "Volume Down" key, you connect the cable to your phone.
7) Give it a few seconds and a Green Light shows up. Then, flashing starts on Flashtool
8) Once flashtool starts flashing, you can stop holding down the Volume Key
9) Wait for the process to finish then unplug the phone and turn it on
That ought to solve your problems. The stock FTF can be found in Dev section of your phone. I'd recommend C.1.0 version as its newer
Click to expand...
Click to collapse
Thanks for your help But do you have any idea where I can find the 6.1.1.c.1.0 version? I can only find one for t-mobile, croatia. I've been looking for one for quite some time now.. :L
youssefkiev said:
Thanks for your help But do you have any idea where I can find the 6.1.1.c.1.0 version? I can only find one for t-mobile, croatia. I've been looking for one for quite some time now.. :L
Click to expand...
Click to collapse
Well, you could download the update using SEUS and then make a ftf from it.
That is b.1.10 not C.
As far as I know c.1 is specific firmware made specially for T-Mobile Croatia and the only c.1 on this forum for now.
tadeas482 said:
Well, you could download the update using SEUS and then make a ftf from it.
Click to expand...
Click to collapse
Umm, I can't even connect the phone for seus to recognize... :S It gets recognized when i'm in recovery mode, but it thinks my phone is an xperia go
ljubanve said:
That is b.1.10 not C.
As far as I know c.1 is specific firmware made specially for T-Mobile Croatia and the only c.1 on this forum for now.
Click to expand...
Click to collapse
Well there's this one: http://forum.xda-developers.com/showthread.php?t=2028139 would that be alright? Off-topic: I miss Croatia :'( Very nice country
Hey bro,
Installing C.1.0 is quite fine on any device T-Mobile branding is minimal and can be easily removed Its the fastest of the 3 stock f/w in my opinion and least buggy I recommend you go with that one
Cheers
youssefkiev said:
Well Hi,
I've been trying to flash a rom on my phone yesterday, and I've unlocked the bootloader and installed CWM Touch v5.5.0.4, I then tried to flash TheBrainsRom v10 but my xperia was stuck in bootloop, it opened the sony splash screen, then a nexus splash screen then a sony splash screen and etc. So now, I tried solving the problem by flashing this kernel on http://forum.xda-developers.com/showthread.php?t=2028139 "Other method to root just flash this kernel (B54) via fastboot and you are rooted : here" And that didn't work out too well, i'm now stuck in a bootloop at the sony splash screen. But strangely enough, I can still access the cwm recovery.
As for my phone it's a sony xperia U (ST25i) 6.1.1.b.1.10
Thanks for reading this, and please help me if you can :S
Click to expand...
Click to collapse
V10 of my Rom is for b54 or c10 firmware.
Not wondering if you stuck in bootloops if you not proceed acc. To my Rom instructions.
Thanks everyone! I flashed the stock ftf and then flashed thebrainsrom v10 and everything works great!
Hi,
Hope someone can help. I've tried to install a custom ROM today and I'm afraid I managed to brick my phone (Xperia P). Here is what i did:
I started out according to the Starters guide:
-Rooted phone
-Installed CWM
-Made a backup
-Unlocked Bootloader
-Installed JB Moonbreaker 3.5: at this point I was actually still following the starters guide, as in: wiping cache, wiping data,wiping dalvik cache and then installing from zip.
-The phone is currently stuck on the loading screen that comes after "Sony" and "Xperia" (the colorful swirling thingie)
-I can only shut it down by pressing and holding the power and volume up keys until it vibrates 3 times in a row.
-Starting with pressing volume down key repeatedly will not bring up CWM (also gets stuck on the same screen).
-Will also not fastboot anymore properly. (waiting for device for "fastboot.exe -i 0x0fce getvar version"; LED on device will not even light up as blue, goes to green instantly)
-In Device Manager I can see it as "Android" with a yellow exclamation mark.
-Sony PC Companion gives me the "My Sony Xperia P LT22 is connected" popup every 15 seconds but will actually not show the device as connected
I'm wondering if I can flash a stock rom on it to recover it or if there is anything else that can be done.
Thanks in advance
huvikman said:
Hi,
Hope someone can help. I've tried to install a custom ROM today and I'm afraid I managed to brick my phone (Xperia P). Here is what i did:
I started out according to the Starters guide:
-Rooted phone
-Installed CWM
-Made a backup
-Unlocked Bootloader
-Installed JB Moonbreaker 3.5: at this point I was actually still following the starters guide, as in: wiping cache, wiping data,wiping dalvik cache and then installing from zip.
-The phone is currently stuck on the loading screen that comes after "Sony" and "Xperia" (the colorful swirling thingie)
-I can only shut it down by pressing and holding the power and volume up keys until it vibrates 3 times in a row.
-Starting with pressing volume down key repeatedly will not bring up CWM (also gets stuck on the same screen).
-Will also not fastboot anymore properly. (waiting for device for "fastboot.exe -i 0x0fce getvar version"; LED on device will not even light up as blue, goes to green instantly)
-In Device Manager I can see it as "Android" with a yellow exclamation mark.
-Sony PC Companion gives me the "My Sony Xperia P LT22 is connected" popup every 15 seconds but will actually not show the device as connected
I'm wondering if I can flash a stock rom on it to recover it or if there is anything else that can be done.
Thanks in advance
Click to expand...
Click to collapse
Keep the stock fw ready to be flashed using flashtool, enter into flashmode and flash it !
Sent from my Xperia U using xda app-developers app
Can't seem to get it flashed from flashtool. I'm pressing the back button and connecting the USB and I'M just getting the same stuff on the phone, while flashtool is waiting for the phone.
I did manage to enter fastboot again though. Should I be flashing CWM from here (since I can't enter it). Or kernel then rom? I'm a bit lost.
huvikman said:
Can't seem to get it flashed from flashtool. I'm pressing the back button and connecting the USB and I'M just getting the same stuff on the phone, while flashtool is waiting for the phone.
I did manage to enter fastboot again though. Should I be flashing CWM from here (since I can't enter it). Or kernel then rom? I'm a bit lost.
Click to expand...
Click to collapse
Its volume down key and Plug in USB, to enter flashmode
Not back button.
Or flash a kernel by fastboot mode, enter CWM and install the ROM (assuming you have the zip file in the SD card )
Sent from my Xperia U using xda app-developers app
No luck. I get a green LED and nothing happens. If I hold down volume down for really-really long then I'm back to the same boot animation.
huvikman said:
No luck. I get a green LED and nothing happens. If I hold down volume down for really-really long then I'm back to the same boot animation.
Click to expand...
Click to collapse
yes green LED it is,
i hope you had the flashing process ready at the PC right ?
First make sure your phone is shut down. long press power+vol up until you feel 3 vibrations.
From there you can try fastboot mode or flash mode.
Utensils vioment
Alright done all that, still is the same. I've started to play with other USB ports and I noticed that when I get connected it tries installing the SEMC Flash device driver. It fails with "device unplugged" message exactly at the same time when when the Sony logo appears. Then it tries installing MTU USB Device as well. Reinstalled flashtool drivers and tried in different ports. It seems as if the phone is not staying in flashmode?
huvikman said:
Alright done all that, still is the same. I've started to play with other USB ports and I noticed that when I get connected it tries installing the SEMC Flash device driver. It fails with "device unplugged" message exactly at the same time when when the Sony logo appears. Then it tries installing MTU USB Device as well. Reinstalled flashtool drivers and tried in different ports. It seems as if the phone is not staying in flashmode?
Click to expand...
Click to collapse
I recall I had that issue with wundows 7 at the beginning, what I did then was to boot my windows xp and managed to flash from there.
I have tried many things since, and if I am not mistaken it's installing flahtool drivers that fixed it finally.
I think there are 3 drivers there you need to install.
nifileb Naval
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
did you tried to flash the rom over ICS, if yes then thats why your p got stuck at boot, coz i too got the same prob, when i tried to flash the JB moonbreaker over ICS, so what i did was pressed the power button and volume up button till 3 vibration, start flashtool and flash stock ICS firmware, but don't uncheck wipe data, otherwise you will get bootloop, after flashing is complete, now download and flash stock JB firmware, root your phone using doomlord's easy root kit or any other way you know, install cwm and now reboot into cwm flash JB stock or custom kernel and then the rom, thats it, just let me know if the prob is solved, thanks
garvitdelhi said:
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
Click to expand...
Click to collapse
Managed to get the phone back to working with this, thanks! Now just a couple of questions left . Do I have to reroot and reinstall CWM after this? I guess BL is still unlocked right?
maknom66 said:
did you tried to flash the rom over ICS, if yes then thats why your p got stuck at boot, coz i too got the same prob, when i tried to flash the JB moonbreaker over ICS, so what i did was pressed the power button and volume up button till 3 vibration, start flashtool and flash stock ICS firmware, but don't uncheck wipe data, otherwise you will get bootloop, after flashing is complete, now download and flash stock JB firmware, root your phone using doomlord's easy root kit or any other way you know, install cwm and now reboot into cwm flash JB stock or custom kernel and then the rom, thats it, just let me know if the prob is solved, thanks
Click to expand...
Click to collapse
It was on JB stock. I'll check if I cano boot to CWM now or have to redo all that stuff and then try flashing Phantom Kernel and then Moonbreak. Will let you know
xperia p
huvikman said:
Managed to get the phone back to working with this, thanks! Now just a couple of questions left . Do I have to reroot and reinstall CWM after this? I guess BL is still unlocked right?
Click to expand...
Click to collapse
yup bl will always be unlocked regfardless of what rom you flash unless you relock it
yup if you have to install cwm again then if you want it and you have to first root it again as well
------------------------------------------------------------
Xperia P PAC rom jb 4.2.2 user
hit thanks if i helped
Thanks everyone for the input, issue resolved, kernel and rom flash was successful.
Stuck on boot
Guys I have the same problem.
I wasn't satisfied with the rom I put on my phone so I went on to put another one on it.
Flashed the kernel with fastboot, went into cwm, deleted system, cache etc. and went on to flash the rom, but there was no rom zip there, and I was sure I had put it. It was probably an error during the copy procces and it just stopped, I assumed it copied.
Well, now it is just stuck on the boot screen. I can get into fastboot and cwm, but I have nothing to flash.
I tried using the Sony recovery "Emma" but it just stays blank when I connect the phone..
Is there something else I can do?
rocker55555 said:
Guys I have the same problem.
I wasn't satisfied with the rom I put on my phone so I went on to put another one on it.
Flashed the kernel with fastboot, went into cwm, deleted system, cache etc. and went on to flash the rom, but there was no rom zip there, and I was sure I had put it. It was probably an error during the copy procces and it just stopped, I assumed it copied.
Well, now it is just stuck on the boot screen. I can get into fastboot and cwm, but I have nothing to flash.
I tried using the Sony recovery "Emma" but it just stays blank when I connect the phone..
Is there something else I can do?
Click to expand...
Click to collapse
The rom probably won't work if you delete /system so reflash stock JB first maybe this will help: http://forum.xda-developers.com/showthread.php?t=1849170
Facing exact same issue i think
garvitdelhi said:
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
Click to expand...
Click to collapse
Hi
I think im facing a very similar issue, i m very new to this and therefore didnt understand the solution. I did visit the developer site for emma, but can you tell me the exact thing to do after starting Emma. I mean, when do i connect the phone and how, what commands to give. Below is explanation of how i got into this and what all ive tried.
OK i ve been trying to flash a new custom rom on my Xperia P, i looked at a number of guidelines and doing things step by step.
Since im very new to this i downloaded a few Roms. I was following the guide "http://droidors.com/2014/07/08/update-xperia-p-lt22i-to-android-4-4-4-kitkat-with-slimkat-custom-rom/2/" and everything was going fine. I reached the step to "fastboot flash boot boot.img", i did that and then went on the next step to boot in CWM Recovery and install the zip rom and the Gapps. During the Zip Rom install i got status 7 error.
Now, i noticed that i might have flashed the wrong Rom so rechecked the guide and installed the correct Rom which is mentioned in "http://forum.xda-developers.com/xperia-u/p-development/rom-slimkat-4-4-2-release-candidate-t2657795" . But now THE PROBLEM IS, AFTER I FLASHED THE INCORRECT IMG, MY PC IS NOT RECOGNISING THE XPERIA P SAYING IT DOESNOT RECOGNISE THE DRIVERS, therefore im not able to copy the ROM Zip on the SDcard, to then run it from CWM.
After sometime i tried the below
Ok, now i tried to flash the stock Rom through this link "http://forum.xda-developers.com/xperia-u/p-development/ftf-firmware-xperia-p-generic-world-t2322163", through flashtool to bring my phone back to life. I installed the drivers as per instructions from drivers folder, but for some reason the pc is just not accepting. I did install through this exact method yesterday night and it worked perfectly.
Please suggest. I hope im asking at the right place.
Urgent help please
I forgot to mention, after I flashed the SlimKat Rom, and things went out of hand ( till this point i could see Slimkat logo at boot and could also go in CWM Recovery ), I tried to restore through Nandroid Backup i had done. As soon i selected the restore option and then the backup file, within 2-3 seconds the phone went off, and then on boot all i can do is see "SONY" on screen. Nothing else happens.
I ve tried all this on a different machine, with different wires and different USB port, no luck
Kindly advise, im stuck with no spare phone.
Solved i guess
OK Brother,
I downloaded EMMA and am currently downloading the service. It is very self explanatory. What was amazing is when i recognised my phone "What a sight "
Flashtools wasnt able to do that, so i guess the manufacture tools are damn important ( i wasnt exactly of the opinion before )
Also it is downloading Android 4.0.4 Build 6.1.1.b.1.54, which first came on the device, which also makes me think may be i should have tried that rather than trying to flash with the JB Rom all this while.
Man, i was scared. Thanks for this thread Bro.
God Bless
Will inform once the phone is booted up to confirm it worked.
Emma Worked
OK guys, I can confirm its EMMA "Flash tool for Xperia" fixed the problem for me. It installed 4.0.4 on it.
Also there is a pdf in the Download which guides about the usage.
Sigh
Correction- it installed the latest stock ROM jb
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
Unbalanced said:
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
Click to expand...
Click to collapse
Do this
Put the phone in fastboot mode>Install recovery again from the command prompt
After recovery is flashed try installing carbon rom
Do this
Put the phone in fastboot mode>Install recovery again from the command prompt
After recovery is flashed try installing carbon rom
Click to expand...
Click to collapse
How do I get into fastboot mode?
The phone connects in flash mode or not at all...
Unbalanced said:
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
Click to expand...
Click to collapse
flash ur device specific firmware. via flash tool
DastanShaikh said:
flash ur device specific firmware. via flash tool
Click to expand...
Click to collapse
I did try this but can't find a reliable download.
The link posted in XDA forums (http://forum.xda-developers.com/showthread.php?t=2759934) takes me to MegaUpload and for some reason the download always stalls at 44% (I've tried 3 times).
Just soft brick!!!
Just search for ftf and flashtool anywhere in internet
Xperia™ Z (C6602) with Tapatalk
Unbalanced said:
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
Click to expand...
Click to collapse
You're on the wrong forum mate, for the z2 go here:
http://forum.xda-developers.com/xperia-z2
Please don't try to flash any .ftf file you downloaded from the xperia z forum, as this would hard brick your phone. Search for it in the link I posted.
Good luck
St.Jimmy90 said:
You're on the wrong forum mate, for the z2 go here:
http://forum.xda-developers.com/xperia-z2
Please don't try to flash any .ftf file you downloaded from the xperia z forum, as this would hard brick your phone. Search for it in the link I posted.
Good luck
Click to expand...
Click to collapse
You're quite right. My apologies, I'm not even sure how I ended up in this section...
Unbalanced said:
How do I get into fastboot mode?
The phone connects in flash mode or not at all...
Click to expand...
Click to collapse
hold up volume key and connect usb the led will be blue
androidtweaker1 said:
hold up volume key and connect usb the led will be blue
Click to expand...
Click to collapse
This connects the phone in flash mode for me.
Unbalanced said:
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
Click to expand...
Click to collapse
flash ur phone with emma tool it will work...it will automatically detect and update ur phone
androidtweaker1 said:
hold up volume key and connect usb the led will be blue
Click to expand...
Click to collapse
Check this
Suresh9488 said:
flash ur phone with emma tool it will work...it will automatically detect and update ur phone
Click to expand...
Click to collapse
I'm very pleased to say that this worked. Thanks!
Now, I think I might just persevere with the stock ROM for now and enjoy my new phone.
Thanks again to everyone who helped.
Unbalanced said:
I'm very pleased to say that this worked. Thanks!
Now, I think I might just persevere with the stock ROM for now and enjoy my new phone.
Thanks again to everyone who helped.
Click to expand...
Click to collapse
well then enjoy.
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
How to recover your device from almost any kind of brick
Requirements
Check the pinned sites
Flashtool
FTF of choice for your device
2 Rubber bands (I am serious but only if your device has no response)
Step1
unplug your device from anything
open flashtool on your pc
plug your cable into your PC
do not plug the cable into your device
Step2
Hold your power button and your volume up button at the same time
your device should buzz 3 times
(this should take a few secconds)
if it does not take a few seconds then you need to put a rubber band around your device holding your power button and your volume up button, DO NOT LEAVE MORE THAN IT NEEDS TO BE LEFT, wait patiently for your device to buzz 3 times
Step 3
once your device has buzzed 3 times you are free to flash a FTF as your device is powered off
step4
if you dont know how to flash a FTF but have gotten as far as installing flashtool,Z2 drivers and downloading a FTF FOR YOUR DEVICE... then folow this step
within your flashtool window click on the lightning icon at the top left
select flashmode
navigate to where you downloaded your FTF (OR put your FTF in your /flashtool/firmwares folder)
select your FTF
Flashtool should give you a prompt to plug in your device
hold volume down and plug in your device
step5
wait for it to finish flashing
step6
your device is now recovered, enjoy...
Sent from my D6503 using XDA Premium 4 mobile app
I bricked my phone doing this:
- root with eazyroot
- installed dual recovery
- full wipe
- install carbon + gapps
bum... bricked
i cant even see the Sony logo
Then i use the method mentioned by Envious_Data and my phone returned from hell
Good luck dude... hope u can fix that
carloscarvalho said:
I bricked my phone doing this:
- root with eazyroot
- installed dual recovery
- full wipe
- install carbon + gapps
bum... bricked
i cant even see the Sony logo
Then i use the method mentioned by Envious_Data and my phone returned from hell
Good luck dude... hope u can fix that
Click to expand...
Click to collapse
You didn't unlock your bootloader?
Isn't Carbon ROM AOSP?
If it is, it needs an unlocked bootloader or it will get bricked
Unbalanced said:
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
Click to expand...
Click to collapse
Okay I used to get into this kind of situation when I used HTC One, and what I did is try to flash recovery and unlocked bootloader again "using command".
And problem has solved. I think it is pretty much same for Xperia Z2, (ftf flashing method is not useful in this situation.)
I hope you know how to flash custom recovery using command. If not I think there is some thread that explains how to flash recovery and unlock the bootloader using command, if you can't find it plz let me know. Hope you have recovered phone next time I check this thread. Good luck mate :good:
HussainQ said:
You didn't unlock your bootloader?
Isn't Carbon ROM AOSP?
If it is, it needs an unlocked bootloader or it will get bricked
Click to expand...
Click to collapse
Yeah... I know... A newbie mistake...
I Just follow the instruction available in the site. And there is just "root and recovery"
No bootloader mentioned
But u r right... Thats the reason
Sent from my awesome Xperia Z2 using XDA Premium
@Envious_Data: Bro, thank you so much for that. I my z2 have only 1 day, and i god damn it bricket, that even screen wasn't working. So for other people who had bad luck: first I rooted using Community Rootkit, then unlocked bootloader, and at the end I flashed via fastboot boot.img which one i extracted from zip file from this thread - http://forum.xda-developers.com/showthread.php?t=2702001. Command prompt showed that it works. I rebooted phone sony logo showed up, but then disappeared, and then was crying and sorrow. Three years of rooting,flashing without any problem, and now that. Thank you one more time, that's a great lesson
I do have some advice for people
1. Try to find help threads for your device, i have one for Z2 that gives some useful info, ill be adding more soon
2. Once you have got the jist of flashing then try to expand on that, i do recomend roms first because its harder to brick from a rom than a kernel or a non stock based rom such as CM11 or AOSP
3. Always keep a stock flashable rom (kernel too if you have a unlocked bootloader) on your device
Sent from my D6503 using XDA Premium 4 mobile app
I too hard brick my Z2, only solution is the same as for Z1 http://forum.xda-developers.com/showthread.php?t=2646405
Sorry friend :`
discipuloosho said:
I too hard brick my Z2, only solution is the same as for Z1 http://forum.xda-developers.com/showthread.php?t=2646405
Sorry friend :`
Click to expand...
Click to collapse
A hard brick is by definition not recoverable by the user, requiring either special equipment ie jtag or RMA to fix.
I am quite surprised, and intrigued, at people flashing cm or AOSP on a two day old phone, was Sony experience that awful? You'd maybe be better served with a nexus device.
ghostofcain said:
A hard brick is by definition not recoverable by the user, requiring either special equipment ie jtag or RMA to fix.
I am quite surprised, and intrigued, at people flashing cm or AOSP on a two day old phone, was Sony experience that awful? You'd maybe be better served with a nexus device.
Click to expand...
Click to collapse
True friend, but I had an Xperia MT11i (Neo V) and all (fastboot, flashtool, CM, etc) was always no problem.
I've taken today for service (with CM11 (and cm kernel)) and see what happens ...
@Unbalanced I don't think your Z2 Hardbricked, if it were not ignite. Luck
Hi all, if it helps I did the same thing last night. Flashed CM11 without a recovery and wanted to revert back to my nandroid backup. I flashed doomloards kernal via fastboot. CWM started with no menu and just bootlooped. I then thought it may be a CWM issue, maybe no file structure or something. I flashed XZDuelKernal via fastboot and booted into CWM again and experienced the same issue. As this is a duel recovery, I then booted into TWRP. Recovery started and I was able to flash another zip then recover my nandroid backup. If you get this menu issue with CWM,try and flash a TWRP recovery and boot into that.
Also, as mentioned before, this is not a hard brick. It's just incompatible software and is easily fixed if you know what you are doing and prepared (nandroid backup, knowledge about fastboot and flashmode, ftf, recovery, unlocked bootloader).
Sent from my D6503 using Tapatalk
Stuck
Hi.
I believe (although I'm not sure) that I have bricked my Xperia Z2 in some way. When I press the 'power' button, the phone vibrates once and does nothing. I have tried to hold the 'power on' and 'volume up' buttons for a long time (half an hour with rubber bands), and nothing happens (as explained earlier in the thread).
I believe I am able to access the fastboot though, through 'Terminal' app on OSX. From there I can " ./fastboot devices " and get confirmation that they have loaded. I am also able to perform other tasks from here, such as flashing a recovery and " fastboot erase system -w " (which I believe may have got me to where I am now). I've been following things on this thread: http://forum.xda-developers.com/showthread.php?t=2277112
I have no experience in rooting or flashing, but attempted to flash a custom ROM because there were step by step instructions.
Anyway, I firstly used Sony's rooting procedure whereby an unlock code is generated etc. Eventually I gained access to the Recovery mode (via clockwork), and wiped the phone, installed the ROMAur zip and GApps zip. However, when I booted, it kept giving me warnings saying the apps were crashing. I've since gotten lost completely and need someone to help bail me out.
I'm hoping I can sort things out via the fastboot.
Thanks in advance for your help.
scoobard said:
Hi.
I believe (although I'm not sure) that I have bricked my Xperia Z2 in some way. When I press the 'power' button, the phone vibrates once and does nothing. I have tried to hold the 'power on' and 'volume up' buttons for a long time (half an hour with rubber bands), and nothing happens (as explained earlier in the thread).
I believe I am able to access the fastboot though, through 'Terminal' app on OSX. From there I can " ./fastboot devices " and get confirmation that they have loaded. I am also able to perform other tasks from here, such as flashing a recovery and " fastboot erase system -w " (which I believe may have got me to where I am now). I've been following things on this thread: http://forum.xda-developers.com/showthread.php?t=2277112
I have no experience in rooting or flashing, but attempted to flash a custom ROM because there were step by step instructions.
Anyway, I firstly used Sony's rooting procedure whereby an unlock code is generated etc. Eventually I gained access to the Recovery mode (via clockwork), and wiped the phone, installed the ROMAur zip and GApps zip. However, when I booted, it kept giving me warnings saying the apps were crashing. I've since gotten lost completely and need someone to help bail me out.
I'm hoping I can sort things out via the fastboot.
Thanks in advance for your help.
Click to expand...
Click to collapse
Download ftf file for your device and flash via flashtool.
mariosraptor said:
Download ftf file for your device and flash via flashtool.
Click to expand...
Click to collapse
Thanks for the quick reply Mario. I did just that (using Kuwait FFT for the D6503), and everything appears to be back to normal. Unfortunately I still have not got root access and can't remove the bloatware. As for the bricking issue however, it's solved. Thanks.