Everyone,
I have been running the latest CM10 nightlies for a couple days and love it on my EVO. However, I am having consistent issues with the navigation. I am S-OFF running the latest firmware. I have been flashing the latest CM10 nightly, although I have also tried deck's latest version as well. When flashing, I wipe everything in sight, trying both the superwipe zip and manual wiping, but everytime I install CM10 the Google navigation crashes on me and has weird screen artifacts. I have also tried using the GPS Status app to clear my GPS data to no avail. Does anyone have any other tricks to get nav to work on CM10?
Thanks!
Brian
Well, all I can say is to make sure you have a half decent kernel, and make sure you're using the right gapps. No reason it should crash on you.
actually im in the same boat. had to use waze (not bad at all), just wish it works.
Misterblc said:
Everyone,
I have been running the latest CM10 nightlies for a couple days and love it on my EVO. However, I am having consistent issues with the navigation. I am S-OFF running the latest firmware. I have been flashing the latest CM10 nightly, although I have also tried deck's latest version as well. When flashing, I wipe everything in sight, trying both the superwipe zip and manual wiping, but everytime I install CM10 the Google navigation crashes on me and has weird screen artifacts. I have also tried using the GPS Status app to clear my GPS data to no avail. Does anyone have any other tricks to get nav to work on CM10?
Thanks!
Brian
Click to expand...
Click to collapse
I have the same issue. Eventually I was going to get around to trying a different kernel.
I am running the Kernel from the CM10 build:
3.0.53-dc2c1ebb
[email protected] #1
Mon Dec 3 21:32:25 PST 2012
As for the GAPPS I just installed the latest I could find with the ROM and then downloaded the latest Maps from the market.
Any recommendations on a good kernel to try?
This is a widespread issue for unrooted, stock users. It is documented in several forums, so it does not only affect you or other rooted users.
I am running CM10 12/05 build from IRC and used my Navigation with G maps for 2 straight hours today with no problems.
I am on the kernel it comes with. Before flashing CM10 I update prl, profile and make sure I have a GPS lock on a Sense rom. Then go into TWRP and wipe cache, dalvick, factory reset, and system a couple times each, flash CM10, I'm using the Captain's Gapps from IRC and it works fine for me.
I've never wiped the GPS data stuff or anything like that either.
YMMV though I guess
Naters
Naters,
I haven't tried using the IRC build...do you have a link / instructions on how to get that (and the GAPPS). I will try loading up MeanROM, getting a sense lock, and then switching to that build.
Thanks!
Brian
NaterTots said:
I am running CM10 12/05 build from IRC and used my Navigation with G maps for 2 straight hours today with no problems.
I am on the kernel it comes with. Before flashing CM10 I update prl, profile and make sure I have a GPS lock on a Sense rom. Then go into TWRP and wipe cache, dalvick, factory reset, and system a couple times each, flash CM10, I'm using the Captain's Gapps from IRC and it works fine for me.
I've never wiped the GPS data stuff or anything like that either.
YMMV though I guess
Naters
Click to expand...
Click to collapse
This is the link to get into the IRC channels.
Once you are in the DL link for the rom and Gapps will be at the top of the page.
http://forum.xda-developers.com/showthread.php?t=1643396
Let me know how it works for you.
Naters
Tried it, some problem unfortunately...I guess this is a YMMV type thing.
BTW, is that IRC channel a good place to get support for CM10? I was hoping to talk with the developers and try to help out with kernel logs or whatever may be useful.
Brian
NaterTots said:
This is the link to get into the IRC channels.
Once you are in the DL link for the rom and Gapps will be at the top of the page.
http://forum.xda-developers.com/showthread.php?t=1643396
Let me know how it works for you.
Naters
Click to expand...
Click to collapse
Sorry it didn't work.
No clue why it works for some and not others.
Sent from my PC36100 using xda app-developers app
Working now
I was having a lot of problems with the navigation until looked in the location access menu and selected the GPS source as "Use Internal GPS." It has been running smooth since then. :fingers-crossed: Hopes this helps.
Hi all,
Long time lurker of XDA and Android user/modder since before Gingerbread. I want to apologize in advance if this post is either in the wrong section, and/or if something similar has already been answered/solved in another thread. I did multiple searches with nothing coming up as a direct hit, or even close for that matter.
I recently purchased an S4 from VZW (Mid-Late July). I rooted and installed TWRP 5.2.0.2 (Forgive me if that's not the exact version...) and flashed AOSP ROMs here and there. After a month or so, I started coming across an issue within all ROMs where I couldn't receive or make calls without my phone either freezing or rebooting. Anything I flashed, or modded, failed to remedy this. I tried different GApps packages, 4.2.2 and 4.3 ROMs, different kernels, and both radios, and absolutely NOTHING solved this. I searched everywhere (Even rootzwiki, forgive me fellow XDA members!), and could not find anyone with the same issue.
I attempted upgrading to TWRP 2.6.0.0 and even tried CWM, and that didn't help either. Eventually, things got so bad that I couldn't boot into ANY ROM, 4.2.2 or 4.3. After nearly 10 hours of trying to unbrick my phone, I finally managed to install Beanstalk 4.3, and while it was working incredibly buggy (Not Beanstalk's fault, the developer is a great developer!) nor could I make calls, I could still send texts and emails. I was able to FINALLY get the Odin3 application to work when I got home from work, and was able to flash the stock MDK image. From there I followed the steps to properly root and install TWRP 2.6.0.0. I installed Slim's Beta 5 4.3 ROM and GApps and everything was working properly! Calling, everything! However, when I made a reboot, it froze. Stuck in the "Samsung Unlocked" screen for over an hour. I pulled the battery, booted into recovery and did a factory reset/cache and dalvik wipe. It still didn't boot. From there I did a full wipe, and data format, installed Beanstalks newest 4.3 ROM and GApps, and everything loaded properly. Then I couldn't make or receive calls without the same issue. I then did the superwipe/format and installed PAC's newest nightly and GApps package, and was able to make calls, but then got stuck when rebooting, even after factory resets and cache/dalvik wipes. After multiple attempts, I gave up and reflashed the stock MDK Samsung image in Odin3 and am leaving it as is until someone here can help me.
I know this post was incredibly wordy, and I apologize for that, but I wanted to give you guys as much information as possible and explain where this all started, as it may lead to why I'm having these problems. I appreciate any and all responses and I will answer any question any of you have to the best of my ability. Please someone save me from the horror that is TouchWiz!
-Travis
First, make a NANDROID if it is working perfect on the stock ROM. This is my first step after root and recovery so that I can always fall back on something to check if there is a hardware problem, or just some sort of (system) file problem. Plus, it'll save you time if you have to go back.
Not sure that it matters, but is the stock ROM odexed, or deodexed?
The calling thing reminds me of when you use the phone overseas but it has yet to be unlocked. When you root, do you check with Root Checker? Do you have SuperSU installed? How about BusyBox? I know some items require BusyBox in order to work, but SuperSU should be installed.
As far as SuperSU, do you update it before switching back to the original kernel? One thing I noted is to be absolutely sure you do so in order to not lose your root when completing the rooting steps. I imagine this could cause other problems too.
I also suggest not using TWRP 2.6, which many people will tell you is quite buggy. Best to use the previous version.
The only other things I can suggest is ALWAYS doing a full wipe of everything before adding a new ROM. I used to do this to be sure I incurred no problems on my SGS3, because if I didn't there would always be something buggy happening.
Hope this helps.
Heatshiver said:
First, make a NANDROID if it is working perfect on the stock ROM. This is my first step after root and recovery so that I can always fall back on something to check if there is a hardware problem, or just some sort of (system) file problem. Plus, it'll save you time if you have to go back.
Not sure that it matters, but is the stock ROM odexed, or deodexed?
The calling thing reminds me of when you use the phone overseas but it has yet to be unlocked. When you root, do you check with Root Checker? Do you have SuperSU installed? How about BusyBox? I know some items require BusyBox in order to work, but SuperSU should be installed.
As far as SuperSU, do you update it before switching back to the original kernel? One thing I noted is to be absolutely sure you do so in order to not lose your root when completing the rooting steps. I imagine this could cause other problems too.
I also suggest not using TWRP 2.6, which many people will tell you is quite buggy. Best to use the previous version.
The only other things I can suggest is ALWAYS doing a full wipe of everything before adding a new ROM. I used to do this to be sure I incurred no problems on my SGS3, because if I didn't there would always be something buggy happening.
Hope this helps.
Click to expand...
Click to collapse
Thank you, Heatshiver!
I always do a full wipe unless I'm doing a dirty flash for a ROM update. I will try reverting back to TWRP 2.5.0.2 (Whichever version that happens to be, I think it's .0.2) tonight and report my results. Also, just to clarify, I always make sure I have the most updated SuperSU/Superuser (Usually the former) and BusyBox.
I appreciate the suggestion.
-Travis
teemunknee said:
Hi all,
Long time lurker of XDA and Android user/modder since before Gingerbread. I want to apologize in advance if this post is either in the wrong section, and/or if something similar has already been answered/solved in another thread. I did multiple searches with nothing coming up as a direct hit, or even close for that matter.
I recently purchased an S4 from VZW (Mid-Late July). I rooted and installed TWRP 5.2.0.2 (Forgive me if that's not the exact version...) and flashed AOSP ROMs here and there. After a month or so, I started coming across an issue within all ROMs where I couldn't receive or make calls without my phone either freezing or rebooting. Anything I flashed, or modded, failed to remedy this. I tried different GApps packages, 4.2.2 and 4.3 ROMs, different kernels, and both radios, and absolutely NOTHING solved this. I searched everywhere (Even rootzwiki, forgive me fellow XDA members!), and could not find anyone with the same issue.
I attempted upgrading to TWRP 2.6.0.0 and even tried CWM, and that didn't help either. Eventually, things got so bad that I couldn't boot into ANY ROM, 4.2.2 or 4.3. After nearly 10 hours of trying to unbrick my phone, I finally managed to install Beanstalk 4.3, and while it was working incredibly buggy (Not Beanstalk's fault, the developer is a great developer!) nor could I make calls, I could still send texts and emails. I was able to FINALLY get the Odin3 application to work when I got home from work, and was able to flash the stock MDK image. From there I followed the steps to properly root and install TWRP 2.6.0.0. I installed Slim's Beta 5 4.3 ROM and GApps and everything was working properly! Calling, everything! However, when I made a reboot, it froze. Stuck in the "Samsung Unlocked" screen for over an hour. I pulled the battery, booted into recovery and did a factory reset/cache and dalvik wipe. It still didn't boot. From there I did a full wipe, and data format, installed Beanstalks newest 4.3 ROM and GApps, and everything loaded properly. Then I couldn't make or receive calls without the same issue. I then did the superwipe/format and installed PAC's newest nightly and GApps package, and was able to make calls, but then got stuck when rebooting, even after factory resets and cache/dalvik wipes. After multiple attempts, I gave up and reflashed the stock MDK Samsung image in Odin3 and am leaving it as is until someone here can help me.
I know this post was incredibly wordy, and I apologize for that, but I wanted to give you guys as much information as possible and explain where this all started, as it may lead to why I'm having these problems. I appreciate any and all responses and I will answer any question any of you have to the best of my ability. Please someone save me from the horror that is TouchWiz!
-Travis
Click to expand...
Click to collapse
sorry for your troubles, but I am always baffled the way people just toss that word "brick" round
Your phone was no anywhere NEAR being a brick...
You simply are playing with fire flashing AOSP ROMs and not knowing how to fix the issues.
AOSP ROMs aren't technically "made" for our phones, the developers do a great job at making it seem like they are, though.
On the SG3 we had an EFS backup that Synergy discovered incase you flash an AOSP and get stuck in roaming which was quite often at first with AOSP, that was easy to fix, but with this phone I would be careful with AOSP ROMs, even myself, with a locked bootloader wouldn't flash anything besides TW, although I am biased as AOSP is my flavor.
I am sorry if this post comes off harsh or any other bad word. It's not meant for that..
Just to kindly ask you to do some research on what a "bricked phone" truly is.
it's a brick.. meaning won't power on, won't get a light when charging, nothing, your phone is just that, a $600 brick. and the only way to bring back to life IIRC is Jtagging the phone.. which requires taking the phone apart and jtagging the motherboard.
I hope you the best my friend.
As much as I love AOSP, I would have to agree with the poster above. I know TW is a pain but there are some pretty good ROMs in that flavor that you shouldn't have any problems with. I've had the no call issue on AOSP, and even though they are nice and free up quite a bit of room it's not worth missing calls over or constantly flashing. Maybe once our bootloader is unlocked things will become different but I'd stick with TW until that happens. I can confirm that TWRP 2.6 is very buggy...you'll have to download the 2.5 version and flash it instead of goomanager they install they latest version everytime I believe.
andybones said:
sorry for your troubles, but I am always baffled the way people just toss that word "brick" round
Your phone was no anywhere NEAR being a brick...
You simply are playing with fire flashing AOSP ROMs and not knowing how to fix the issues.
AOSP ROMs aren't technically "made" for our phones, the developers do a great job at making it seem like they are, though.
On the SG3 we had an EFS backup that Synergy discovered incase you flash an AOSP and get stuck in roaming which was quite often at first with AOSP, that was easy to fix, but with this phone I would be careful with AOSP ROMs, even myself, with a locked bootloader wouldn't flash anything besides TW, although I am biased as AOSP is my flavor.
I am sorry if this post comes off harsh or any other bad word. It's not meant for that..
Just to kindly ask you to do some research on what a "bricked phone" truly is.
it's a brick.. meaning won't power on, won't get a light when charging, nothing, your phone is just that, a $600 brick. and the only way to bring back to life IIRC is Jtagging the phone.. which requires taking the phone apart and jtagging the motherboard.
I hope you the best my friend.
Click to expand...
Click to collapse
Next time, I'll just say "Soft-bricked". Thank you for your reply.
-Travis
You also may want to try CWM recovery if everything else fails. I like TWRP but I kept having the exact problem you have. I switched and haven't had a problem since.
Sent from my SCH-I545
slim6596 said:
You also may want to try CWM recovery if everything else fails. I like TWRP but I kept having the exact problem you have. I switched and haven't had a problem since.
Sent from my SCH-I545
Click to expand...
Click to collapse
Would you mind telling me which version of CWM you're using? I haven't gone back to CWM since I went back to stock two nights ago.
Thank you for the idea!
-Travis
I also forgot to mention that I haven't been able to connect to 4G radios since before I started having issues with AOSP ROMs. Currently I'm on Eclipse's TW (With AOSP Styling) ROM. Everything appears to be working fine, other than 4G.
I've tried the SIM pull and reset, and nothing. I've tried manually setting it to LTE only, at least when I was able to do so when AOSP ROMs would boot for me, and nothing. I have a Galaxy Nexus that I booted up with this SIM in and I get 4G signal. Any Ideas?
Also, when I was on the stock image (MDK) I didn't have 4G either.
Has anyone else run across this issue? (MODS: Let a me know if I should create another thread, or search more intensively. I haven't seen a thread with this exact same situation. Plenty of 4G issue threads, but none with the same issues I've previously had, and I think it may have something to do with my past modding.)
-Travis
teemunknee said:
Would you mind telling me which version of CWM you're using? I haven't gone back to CWM since I went back to stock two nights ago.
Thank you for the idea!
-Travis
Click to expand...
Click to collapse
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
slim6596 said:
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks! I installed CWM 6.0.3.6 Touch and flashed Eclipse's TW/AOSP ROM and everything works well, but it's still no AOSP ROM.
-Travis
Hi all,
I'd like to thank everyone for the suggestions.
An update: Currently I'm on Eclipse's TW v2.0 ROM (TW, with AOSP Styling) and everything works properly. My current recovery is CWM 6.0.3.6 Touch, and I'm not experiencing any booting or calling issues. 4G is the only thing I don't have working.
I'm hoping that someone with my same problem can give me another idea so I can get an AOSP ROM working, preferably with 4G. I'm sure some, if not most, understand my dislike of TouchWiz and strong preference towards stock Android/stock Android based ROMs. Slim6596 said that he uses Philz Modded CWM Recovery and has no issues anymore. Could that really be my solution?
Again, thank you all for your help and ideas. I love XDA for this reason.
-Travis
slim6596 said:
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
Click to expand...
Click to collapse
Hi Slim,
Sorry to bother, but I was curious if you were specifically using the LOKI patched version, or just the regular version?
-Travis
teemunknee said:
Hi Slim,
Sorry to bother, but I was curious if you were specifically using the LOKI patched version, or just the regular version?
-Travis
Click to expand...
Click to collapse
Loki patched, I believe.
Sent from my SCH-I545
slim6596 said:
Loki patched, I believe.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
teemunknee said:
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
Click to expand...
Click to collapse
I have stuck to TW ROMs. Pretty soon I'm probably not going to be flashing anything. Switching to Motorola and giving Vz my MDK S4 back. (Reception and dropped call issues.)
Sent from my SCH-I545 using Tapatalk 2
teemunknee said:
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
Click to expand...
Click to collapse
I believe you have to do the extended phone function. Its a code on the dial pad and select cdma. I have read this but don't recall where.
Sent from my SCH-I545 using Tapatalk 4
egore93 said:
I believe you have to do the extended phone function. Its a code on the dial pad and select cdma. I have read this but don't recall where.
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
Are you referring to the *#*#4636#*#* dialer code? I didn't even try that because in my settings, everything was set to CDMA, but that's something I can try. I have everything backed up, so I can just wipe, install, and try that. If it doesn't work, I can always revert back.
Thanks for the suggestion!
-Travis
teemunknee said:
Are you referring to the *#*#4636#*#* dialer code? I didn't even try that because in my settings, everything was set to CDMA, but that's something I can try. I have everything backed up, so I can just wipe, install, and try that. If it doesn't work, I can always revert back.
Thanks for the suggestion!
-Travis
Click to expand...
Click to collapse
Yes that's it give it a go.
Sent from my SCH-I545 using Tapatalk 4
i have flashed the latest version of RR 5.0.8 rom but for some reason my internet is not working though wifi is connecting properly ..i have tried factory reset and re installing the rom but the problem still persists ..can someone please help me out ?
hej
try full wipe
A longer friendly answer
tr!ckst3r said:
i have flashed the latest version of RR 5.0.8 rom but for some reason my internet is not working though wifi is connecting properly ..i have tried factory reset and re installing the rom but the problem still persists ..can someone please help me out ?
Click to expand...
Click to collapse
ROMs are tricky things in my experience.
I've tried most of them and most of the ones I tried have really bad flaws - for my phone.
When one doesn't go so well for you - like the RR ROM, it's time to move on and try another.
After following the instructions of course, like full wipe, cache, blah blah blah. Try it twice, the second time following instructions really closely.
I found the PA and offspring to work really well - for my phone.
In the end, play and learn. It's fun and really difficult to completely wreck your phone.
Pete
^^^
Might be a longer friendlier answer but the answer is essentially nonsense. The OP has a specific problem. Posting waffle like you just did smacks of wanting to get your post count up because it doesn't help the OP one bit.
OP - You haven't given us anywhere near enough info to help you. Connectivity normally just doesn't go away all of a sudden unless you've made changes to your setup, or there's a carrier-side issue causing the problem.
What have you done with the phone recently setup-wise, have you been messing around with RIL's or modems ? If it's the latter, then you need to try more modems. If it's neither, I'd be going back to stock (a rom for your carrier, so you get a modem that should work), then reinstall the rom you're using. If that doesn't work, flash the 3 part firmware in Hopper8's 'Odin troubleshooting' thread stickied in General (this will wipe your phone, backup first), then flash stock for your carrier, then reinstall custom rom.
If the problem persists after all that, then you're looking at carrier-side issues or perhaps even a hardware issue. WiFi working & data not have no bearing on each other as WiFi drivers are in the kernel & separate to data connectivity.
We would need more information as to how did you flash the new ROM? Are you using a separate Kernel? Which GAPPS version did you flash?
I am also on the RR 5.0.8 with Dorimanx kernel. Also, I used the light version of GAPPS for flashing. Try using the light version if you have not used it.