Related
Was running NRG GB just fine. When giving the phone to the wife I decided to upgrade to ICS. Used CWM to wipe data, cache, etc, and installed, got freeze on HTC logo. Started using Superwipe before each try and also tried flashing several different kernels including the one inside the zip and the one included with the amaze stock kernel flasher. Now the best I can get is 5 seconds into the Energy spinning rings logo before a 5s freeze and reboot.
The only thing I haven't tried is firmware; I've seen references to "find it on the forums" but copious forum and google searches don't seem to lead to the ICS firmware itself. Can anyone help with that or point out what I'm forgetting?
In the meantime I will try installing the ICS stock ROM first and see where that gets me.
ten6 said:
Was running NRG GB just fine. When giving the phone to the wife I decided to upgrade to ICS. Used CWM to wipe data, cache, etc, and installed, got freeze on HTC logo. Started using Superwipe before each try and also tried flashing several different kernels including the one inside the zip and the one included with the amaze stock kernel flasher. Now the best I can get is 5 seconds into the Energy spinning rings logo before a 5s freeze and reboot.
The only thing I haven't tried is firmware; I've seen references to "find it on the forums" but copious forum and google searches don't seem to lead to the ICS firmware itself. Can anyone help with that or point out what I'm forgetting?
In the meantime I will try installing the ICS stock ROM first and see where that gets me.
Click to expand...
Click to collapse
Do just that, remember to lock your bootloader if you're s-on and yes, jumping to an ICS rom without updating your device caused the bootloop.
Dark Nightmare said:
Do just that, remember to lock your bootloader if you're s-on and yes, jumping to an ICS rom without updating your device caused the bootloop.
Click to expand...
Click to collapse
Thanks for the reply! I'm downloading PH85IMG_RUBY_ICS_35_S_TMOUS_2.14.531.3_Radio_1.14.550L.17DC_30.78.550L.15_release_259626_signed.zip from filefactory, it's taking forever. Am I flashing this with CWM? Or should I be downloading a GB factory ROM and using that instead, then re-locking the bootloader and trying to update over the air?
ten6 said:
Thanks for the reply! I'm downloading PH85IMG_RUBY_ICS_35_S_TMOUS_2.14.531.3_Radio_1.14.550L.17DC_30.78.550L.15_release_259626_signed.zip from filefactory, it's taking forever. Am I flashing this with CWM? Or should I be downloading a GB factory ROM and using that instead, then re-locking the bootloader and trying to update over the air?
Click to expand...
Click to collapse
Don't download that one, it has issues, hold up, I'll give you a link to the most recent file.
Here, get this: http://d-h.st/3VD
Download speed should be faster as well. rename it PH85IMG and place it on your sd card after you relock your bootloader, then boot into bootloader, it's gonna detect the file and ask you if you wanna update, follow the on screen instructions to update, voila! Follow the basics to install the new energy rom.
It's almost as tho NO One reads anymore. It's actually getting kinda ridiculous how many times the same issue is gonna be asked.
I know this post isn't very helpful but I'm sure most of the recognized/senior/not noobs members are getting frustrated.
~~~~~~~~~~~~~~~~~~~~~~~~
It's Better To Fail At Originality
Than To Succeed In Imitation.
-Mighty Healthy
Click to expand...
Click to collapse
Double0EK said:
It's almost as tho NO One reads anymore. It's actually getting kinda ridiculous how many times the same issue is gonna be asked.
I know this post isn't very helpful but I'm sure most of the recognized/senior/not noobs members are getting frustrated.
~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
It is useful, I fully agree with you, it's like we come here to answer the same questions over and over, but I'm just trying to be nice, cause I usually just say, read the amaze bible, but then they go and do something even more noobish, so to avoid the tear jerks I just give the basic info, though I'm fading away slowly.
Thanks'd for the link and the help. I was gonna get mad about being called a noob who can't read, but I guess it's a small price to pay for instant, free help. Keep on rockin' XDA.
I came across this issue. As earlier posts said, install the new ICS update. The partitions were messed up and the ruu will clean it up.
ten6 said:
Thanks'd for the link and the help. I was gonna get mad about being called a noob who can't read, but I guess it's a small price to pay for instant, free help. Keep on rockin' XDA.
Click to expand...
Click to collapse
Lol, never pointed fingers buddy, so calm down.
Maybe I should create a new topic but my issue is similar to this one except for the fact that I read quite a lot and tried quite a few things.
My situation is that I made a backup with cwm only booted not flashed so I have the 100% stock backed up, after this I flashed cwm and tried to install the Energy rom based on ics and that was my mistake as I used to be on a Nexus device I didn't have to worry about this.
So I got stuck on a bootloop and tried factory reset/wiping everything, tried to reinstall a stock ROM (t-mobile one as I only found a .exe for the videotron one and I did not feel like exploring the exe as I am a Linux user) by relocking bootloader and using the HTC method, tried to install manually the stock Kernel with Energy ROM using adb and fastboot commands, tried to restore my backup but nothing seems to work, I'm still bootlooping.
Is-it possible to s-off without a regular adb access (only the cwm adb access)? And would s-off allow me to flash anything as I wish? Is there a way to have any ROM working on my device? (i know the answer is yes to the last one, at least )
Thanks!
Edited: I don't know why I even replied to the post above this.
Read more you'll find out what you're doing wrong.
~~~~~~~~~~~~~~~~~~~~~~~~
It's Better To Fail At Originality
Than To Succeed In Imitation.
-Mighty Healthy
Click to expand...
Click to collapse
Double0EK said:
Edited: I don't know why I even replied to the post above this.
Read more you'll find out what you're doing wrong.
~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
Maybe I'm a noob on this forum but it's far to be the first time I face a problem in software configuration/installation and I read quite enough (spent about five hours on xda, google, etc.) to say that you should at least help me a bit by linking me to a thread where I can find an answer.
I know my mistake was to install ics at first but now I flashed the stock recovery back, I relocked the bootloader via fastboot and put the file on the root of my sdcard renamed correctly that it be detected automaticly (and it apparently does install) but I still got the * bootloop.
I'm able to read a manual and to read the Amaze 4G bible four times to try to point out the detail I forgot. I made my homework and now it would only be nice from you that you help me a bit...
johnride said:
Maybe I'm a noob on this forum but it's far to be the first time I face a problem in software configuration/installation and I read quite enough (spent about five hours on xda, google, etc.) to say that you should at least help me a bit by linking me to a thread where I can find an answer.
I know my mistake was to install ics at first but now I flashed the stock recovery back, I relocked the bootloader via fastboot and put the file on the root of my sdcard renamed correctly that it be detected automaticly (and it apparently does install) but I still got the * bootloop.
I'm able to read a manual and to read the Amaze 4G bible four times to try to point out the detail I forgot. I made my homework and now it would only be nice from you that you help me a bit...
Click to expand...
Click to collapse
Okay okay, calm down, there's currently only one method of going about restoring your device since you're s-on and no you cannot s-off with just cwm adb, I think JB s-off method is only an exe file, never saw linux files anywhere on his site. Anyways, you have to use the GB exe for videotron and restore to stock via it then update to ics to use the most recent energy rom, BUT if you just want a working device, this is just an idea, though it should work fine, you can flash a custom recovery and flash the GB version of energy rom, you should be able to restore your backup as well, but you said you can't, which is odd, it may be because of the kernel not being flashable as since CWM cannot flash kernels while s-on, in which case I'd advise you to get 4EXT recovery and then try restoring your back once again, it should work fine since 4EXT can flash kernels while S-ON.
My two cents.
Well, 4ext doesn't works, apparently it flashes correctly but I can't boot in it so can't even try to restore my backup, s-off doesn't works from cwm and my device has to be booted to work with Videotron's exe (or I badly installed my drivers, I nerver understand properly the 899363 drivers per device I have to install for an android phone on Windows?)
Smells bad... I checked the 4ext's md5sum and it's alright, I took it from the fastboot installable img in direct dl from the thread in the Amaze bible.
Any idea?
Oh and there is a JB s-off executable for Linux on his site. After all I guess it is mostly adb commands?
johnride said:
Well, 4ext doesn't works, apparently it flashes correctly but I can't boot in it so can't even try to restore my backup, s-off doesn't works from cwm and my device has to be booted to work with Videotron's exe (or I badly installed my drivers, I nerver understand properly the 899363 drivers per device I have to install for an android phone on Windows?)
Smells bad... I checked the 4ext's md5sum and it's alright, I took it from the fastboot installable img in direct dl from the thread in the Amaze bible.
Any idea?
Oh and there is a JB s-off executable for Linux on his site. After all I guess it is mostly adb commands?
Click to expand...
Click to collapse
I got lost halfway through that post, after flashing a rom, if the kernel isn't flashed (reboots and does it automatically), then flash the kernel manually, should boot fine, does anyone ever really read anymore? This very issue both s-on and s-off has been answered more times today than I can count. If you read the details on JB's site, you'd see and know all you need to.
Right, I'va already flashed manually the stock kernel as sais in the NRGRom thread without success before my first post here, will look at different kernels.
johnride said:
Right, I'va already flashed manually the stock kernel as sais in the NRGRom thread without success before my first post here, will look at different kernels.
Click to expand...
Click to collapse
How did you go about flashing the kernel?
Sent from my SGH-T679 using xda app-developers app
There was a flash.sh file in the zip with the kernel, I couldn't run it normally as I can't boot but I went in cwm (maybe I should have used 4ext, don't think so for this part) executed the adb commands there were in the sh file with all filesystems mounted, rebooted into fastboot and flashed the kernel image. Maybe there are differents /system when in cwm and when booted on regular system... Will figure that out when I have time to spend on this, as soon as possible.
Thanks for all the cues!
Sent from my Nexus S
johnride said:
There was a flash.sh file in the zip with the kernel, I couldn't run it normally as I can't boot but I went in cwm (maybe I should have used 4ext, don't think so for this part) executed the adb commands there were in the sh file with all filesystems mounted, rebooted into fastboot and flashed the kernel image. Maybe there are differents /system when in cwm and when booted on regular system... Will figure that out when I have time to spend on this, as soon as possible.
Thanks for all the cues!
Sent from my Nexus S
Click to expand...
Click to collapse
Okay here's a few tips, cwm cannot flash kernels with son devices, get 4ext recovery for that. Second thing, reflash the from after doing a super wipe, if 4ext doesnt reboot and flash the kernel, do it manually, ill assume you know how to use ad, if not check my Bible tutorial on it, use the boot command for flashing boot images, take the boot file from the zip file, place it in the folder where your adb files are and flash it to your device while its in fastboot mode.
Sent from my SGH-T679 using xda app-developers app
Well, I think I have done all you mention above, the only thing i'm not sure to understand is what you mean by "super wipe" I found some executables about it but I guess it can't do much more than the flash all partitions (except external sdcard) in 4ext recovery wich I finally managed to install properly.
So, I made that global formatting thing, I tried to install an ICS based ROM and 4ext rebooted to install kernel, same bootloop. Tried to install manually the kernel that came with this rom via the classic fastboot flash boot boot.img. Same bootloop. Tried to put the modules manually via the recovery adb access (performing a mount -a in adb shell to have everything present in fstab mounted) and flashing this stock kernel with no more success.
Achieved the same operations with a GB based ROM (this one: http://forum.xda-developers.com/showthread.php?t=1535173) with both the faux and the stock kernel without any more success.
Did I miss something? Am I so dumb? Do you have any other rom to suggest that have higher chances to succeed?
Do you think trying to restore my sotck nandroid with 4ext has more chances to succeed?
Thanks, again and always!
After downloading this rom and thinking everything would be just fine when moving to CM7 on my brother's rooted Photon, I come to a boot loop! I tried to use RSDLite to flash a SBF over to the phone, it fails, I try to use Android' Recovery to flash a new rom, fails, and then I try to factory reset and wipe the phone, FAILS! I have no clue what to do here.
I am so used to my Sensation 4G and everything is so much simpler on it, but I have no clue what I am doing with this Photon. Can someone please point me in the right direction of what I need to do? I need some real answers! I've tried tons of guides here on the forums but nothing seems to work!
Normally I could use CWM to fix it all up, but I never could find it for this phone!
Help!
bump. Please, need help.
ClipTy said:
After downloading this rom and thinking everything would be just fine when moving to CM7 on my brother's rooted Photon, I come to a boot loop! I tried to use RSDLite to flash a SBF over to the phone, it fails, I try to use Android' Recovery to flash a new rom, fails, and then I try to factory reset and wipe the phone, FAILS! I have no clue what to do here.
I am so used to my Sensation 4G and everything is so much simpler on it, but I have no clue what I am doing with this Photon. Can someone please point me in the right direction of what I need to do? I need some real answers! I've tried tons of guides here on the forums but nothing seems to work!
Normally I could use CWM to fix it all up, but I never could find it for this phone!
Help!
Click to expand...
Click to collapse
if you dont have cwm installed, i assume that you flashed that rom while in bootstrap recovery because you didnt state that the phones bootloader was unlocked.That particular rom is an unlocked only rom, which is why you're stuck in that loop. If I'm right and you flashed that rom via bootstrap, you should be able to get back into it by powering down the phone, holding power and volume down, then using the volume down key to cycle through the options until you hit 'android recovery', then press volume up to boot into it.
At that point, go to mounts and storage, mount usb storage while phone is plugged into your pc, and place this rom:
http://forum.xda-developers.com/showthread.php?t=1648297
On your sd card. After this, go back into mounts and storage and wipe data, system, and cache. Flash the rom you just placed onto your sd card and reboot.
Again, this is all asuming you installed bootstrap recovery, if I'm wrong let me know and ill try to help you further.
I forgot to add, you're also going to need to download a stock blur kernel and place that on your sd card aswell, flashing it after you flash the rom. I can't remember where to find the stock blur kernel but give me a second and ill try to find it for ya.
I don't find that very professional. I think the best you can do is tell me which section it belongs in. At least Acvice offered help...
Thanks you so much! I knew I would have to flash the stock stuff, but I just couldn't find it! Yes, I used bootstrap as I thought it was the only means of getting into cwm. I wont be screwing around after this. Only problem is, the phone is dead! I need to charge it again lol. Thanks for helping. Ill let you know the outcome later.
Acvice said:
*snip*
Click to expand...
Click to collapse
So I am downloading that rom you gave me, seems like a good one, now I am just waiting on the Kernel, have you found it yet? Oh, and I couldn't mount my phone through recovery, so I just took the SD card out and did it myself.
EDIT: I tried to install the rom, I got an E: signature verification failed and the installation aborted. I've also tried this with other roms before. What is making this happen?
ClipTy said:
So I am downloading that rom you gave me, seems like a good one, now I am just waiting on the Kernel, have you found it yet? Oh, and I couldn't mount my phone through recovery, so I just took the SD card out and did it myself.
EDIT: I tried to install the rom, I got an E: signature verification failed and the installation aborted. I've also tried this with other roms before. What is making this happen?
Click to expand...
Click to collapse
Meh, you just flashed something you shouldnt have is all. It honestly happens to all of us. You learn the most by screwing up your phone haha.. Figured i would have you try that method as it would have gotten you a nice fast rom and also fixed your problem. But it looks like youre just unlucky. Were just gonna have to get ya back on stock by flashing an SBF.
1) Download the Windows Moto drivers and install them. Make sure you choose 32bit or 64bit, respectively. (quick google search)
2) Download RSD Lite (quick google search)
3) Download the SBF located here and unzip it.
Use this video to guide you through. Some of his links are outdated which is why i linked the one above. If you are used to ODIN on Samsung devices, you'll probably already know what to do as it's the same kind of program. Good luck. Let me know how it goes.
I've tried RSDLite with an Sbf before, it never succeeded.
Sent from my HTC Sensation using xda app-developers app
Is it possible to flash an sbf with a low battery? If not, how can I charge this thing?
Hello all
I have searched all over but have not found any similar problems.
I rooted my phone and installed CWM and would like to install a custom rom that exists for Gingerbread 2.3.6 (I flashed back to stock OS), I have found the rom that I seem to like a lot (Atomic rom) however when I put the .zip file into my external sd and use rom manager to install the rom it turns off, then the phone boots back up... Any ideas about what is happening? Maybe I do not have everything rom manager needs?
I am definitely not ready to flash the new rom using odin, unless you put the .zip file into PDA section and hit "Start" when the phone is in download mode... from the forums I read it is not as easy as installing the stock OS
Thanks in advance!
HeyLookItsKarl said:
Hello all
I have searched all over but have not found any similar problems.
I rooted my phone and installed CWM and would like to install a custom rom that exists for Gingerbread 2.3.6 (I flashed back to stock OS), I have found the rom that I seem to like a lot (Atomic rom) however when I put the .zip file into my external sd and use rom manager to install the rom it turns off, then the phone boots back up... Any ideas about what is happening? Maybe I do not have everything rom manager needs?
I am definitely not ready to flash the new rom using odin, unless you put the .zip file into PDA section and hit "Start" when the phone is in download mode... from the forums I read it is not as easy as installing the stock OS
Thanks in advance!
Click to expand...
Click to collapse
you leave so many questions unanswered here. you have provided some information here, but not the vital info and the last part is very confusing.
im sorry, I know you are new here, but you lead me to ask some very generic questions....................
are you in the right forum for the right phone? this is for the Note1
I only ask this because I cant even find any GB ROMS for this phone. the Note 1 has been updated to official JB. I would and I am sure you would hate to flash wrong files to wrong phone and wind up with a BRICK.
I am not trying to make it sound as if you don't even know what phone you have, but you would not be the first to flash wrong and kill your phone.
may I suggest you read up in the "Super Everything Thread", which is in the General Forum. you will find exactly that, EVERYTHING, there. Odin is no big deal and super easy to use. also most don't even use CWM or ROM MANAGER anymore. TWRP is now the RECOVERY of choice and much more user friendly.
there are also many YOUTUBE tutorals that can walk you through. but first, lets make sure you are in the right place.
your phone is a ???????? NOTE 1
you carrier is ?????? att, tmo, ver, sprint
it is presently running ??????? GB, ICS, JB
good luck and let us know if we help
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
shayneflashindaily said:
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
Click to expand...
Click to collapse
SAUROM !!!!
captemo said:
you leave so many questions unanswered here. you have provided some information here, but not the vital info and the last part is very confusing.
im sorry, I know you are new here, but you lead me to ask some very generic questions....................
are you in the right forum for the right phone? this is for the Note1
I only ask this because I cant even find any GB ROMS for this phone. the Note 1 has been updated to official JB. I would and I am sure you would hate to flash wrong files to wrong phone and wind up with a BRICK.
I am not trying to make it sound as if you don't even know what phone you have, but you would not be the first to flash wrong and kill your phone.
may I suggest you read up in the "Super Everything Thread", which is in the General Forum. you will find exactly that, EVERYTHING, there. Odin is no big deal and super easy to use. also most don't even use CWM or ROM MANAGER anymore. TWRP is now the RECOVERY of choice and much more user friendly.
there are also many YOUTUBE tutorals that can walk you through. but first, lets make sure you are in the right place.
your phone is a ???????? NOTE 1
you carrier is ?????? att, tmo, ver, sprint
it is presently running ??????? GB, ICS, JB
good luck and let us know if we help
Click to expand...
Click to collapse
Sorry about that... I have the Samsung Galaxy Note i717 for AT&T and I am running Gingerbread 2.3.6
I thought that if a rom could run on GB it could run on any phone that has GB but your response has lead me to know that it also depends on what phone I'm running, so thanks!
I'll go and double check to see if the rom I tried to install was for the note... I guess I'm lucky I didn't brick my phone when I tried flashing the other 2 rome xD... Gonna count my blessings tonight lol
HeyLookItsKarl said:
Sorry about that... I have the Samsung Galaxy Note i717 for AT&T and I am running Gingerbread 2.3.6
I thought that if a rom could run on GB it could run on any phone that has GB but your response has lead me to know that it also depends on what phone I'm running, so thanks!
I'll go and double check to see if the rom I tried to install was for the note... I guess I'm lucky I didn't brick my phone when I tried flashing the other 2 rome xD... Gonna count my blessings tonight lol
Click to expand...
Click to collapse
don't need to apologize to me for anything. the more information the better. not only are there so many phones out there, there are variations of those phones that have gotten people in trouble.
you have the North American version
International version
Korean version
different internals and wont all take same ROM. just be careful my friend.
shayneflashindaily said:
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
Click to expand...
Click to collapse
I am looking into this rom, looks pretty interesting. Flashing the "AT&T fix" though, do I put that on my SD card also?
Update: For some reason I can not install rome
I am not sure what I am doing wrong because I have Rom manager do everything when I put the .zip file on my SD card and the phone restarts like normal, I even tried doing it manually in cwm recovery. I have no idea what I am doing wrong. And this rom I know for sure is meant for GB and the i717.
Any suggestions? Thanks again
You mean it's a gb rom meant for the i717 galaxy note....... I think you may be a little mixed up on what a rom is and what your actually doing...... Explain in detail what exact steps your doing when your flashing the rom so someone can help you.
2§HAYNE
shayneflashindaily said:
You mean it's a gb rom meant for the i717 galaxy note....... I think you may be a little mixed up on what a rom is and what your actually doing...... Explain in detail what exact steps your doing when your flashing the rom so someone can help you.
2§HAYNE
Click to expand...
Click to collapse
I appreciate your patience
Step 1: I put the downloaded .zip rom (saurom) into my external sd card in a special folder I named Roms
Step 2: I fire up Rom manager and go to "Install ROM from SD Card"
Step 3: Go to folder containing the Saurom .zip file and select it
Step 4: Make sure "Backup Existing Rom" and "Wipe Data and Cache" are selected
Step 5: Hit "Reboot And Install"
The phone will then turn off and restart like normal, I check but the rom did not install. I honestly have no idea how I'm screwing up lol
Do you have a custom recovery installed....
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
HeyLookItsKarl said:
I appreciate your patience
Step 1: I put the downloaded .zip rom (saurom) into my external sd card in a special folder I named Roms
Step 2: I fire up Rom manager and go to "Install ROM from SD Card"
Step 3: Go to folder containing the Saurom .zip file and select it
Step 4: Make sure "Backup Existing Rom" and "Wipe Data and Cache" are selected
Step 5: Hit "Reboot And Install"
The phone will then turn off and restart like normal, I check but the rom did not install. I honestly have no idea how I'm screwing up lol
Click to expand...
Click to collapse
You have to understand this as well, the ROMS do not install in conjunction or within the current Stock ROM. They replace them. So as stated above you have to make sure you have CWM or TWRP installed and boot directly to the custom recovery. Then wipe your data/system/cache/dalvik and after all of that install the ROM of choice.
http://forum.xda-developers.com/showthread.php?t=1525341
The very first thing listed in this topic is how to install Saurom. No where does it say to try and do it through ROM Manager.
Maybe that is where your hiccup is coming from?
No further instructions needed good luck and happy flashing
2§HAYNE
ZacksBuilds said:
Do you have a custom recovery installed....
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yes
KSoD said:
You have to understand this as well, the ROMS do not install in conjunction or within the current Stock ROM. They replace them. So as stated above you have to make sure you have CWM or TWRP installed and boot directly to the custom recovery. Then wipe your data/system/cache/dalvik and after all of that install the ROM of choice.
http://forum.xda-developers.com/showthread.php?t=1525341
The very first thing listed in this topic is how to install Saurom. No where does it say to try and do it through ROM Manager.
Maybe that is where your hiccup is coming from?
Click to expand...
Click to collapse
Alright so I forgot that I had to wipe the data/system / cache / dalvik
But even when I tried that just now and went into installing the .zip file it said that the installation failed, is it because cwm was removed when I wiped the device?
Update your recovery to twrp 2.6
Sent from my SGH-I717 using xda app-developers app
What would updating the recovery do?
Gets rid of status 7 error that makes it unable to flash.
Sent from my SGH-I717 using xda app-developers app
HeyLookItsKarl said:
Yes
Alright so I forgot that I had to wipe the data/system / cache / dalvik
But even when I tried that just now and went into installing the .zip file it said that the installation failed, is it because cwm was removed when I wiped the device?
Click to expand...
Click to collapse
How do you forget that? That's the whole point besides actually flashing the rom... It's a must.... Smfh
2§HAYNE
ZacksBuilds said:
Gets rid of status 7 error that makes it unable to flash.
Sent from my SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
So could I flash using GooManager?
shayneflashindaily said:
How do you forget that? That's the whole point besides actually flashing the rom... It's a must.... Smfh
2§HAYNE
Click to expand...
Click to collapse
haha, only problem is that the rom hit an error anyways so I'm still lost at what I am doing wrong...
Another question, when I reset all of the settings and stuff before I flash the rom, wouldn't that get rid of titanium back up? then how would I restore my apps and data?
Yes you are right... But first stick your phone in the freezer for 2hrs...then microwave it for 3 mins... It will cause your recovery to reconstruct and see your internal storage enabling developer options to be on... Then hit the rom installer button.
2§HAYNE
---------- Post added at 03:36 AM ---------- Previous post was at 03:33 AM ----------
Disregard last post I put..... Go to super everything thread.....
2§HAYNE
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.
Hi Folks,
I have just installed CWM recovery V 6.0.4.6 using ROM Manager app in my Galaxy S3 I9300 running on stock android 4.3 . I rebooted the device to check it and it was successfully installed. While I tried to reboot device through an option in the recovery, it showed up two messages as follows,
Message 1:
ROM may flash stock recovery on boot. Fix? THIS CAN'T BE UNDONE
1.No
2.Yes - Disable recovery flash
Message 2:
Root Access Possibly Lost Fix?
THIS CANNOT BE UNDONE
1. No
2. Yes - Fix root (/system/xbin/su)
I selected option "2.Yes - Disable recovery flash" from Message 1 and again option "2. YES fix root (/system/xbin/su)" from Message 2.
Why these messages are getting displayed? Is there any problem now?
Also please let me know whether it will revert to Stock Android Recovery by selecting Option "1.No" from Message 1. If so again I have to flash CWM recovery?
Stock firmware will restore stock recovery on next boot, suggest you read and understand the basics before you damage your phone.
Don't use rom manager on the s3.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Stock firmware will restore stock recovery on next boot, suggest you read and understand the basics before you damage your phone.
Don't use rom manager on the s3.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thanks. So shall I revert back to stock recovery by selecting 1.No from message 1 and then flash cwm using odin?. Will it be fine?
I have also read that many folks facing same kinda issue even they flashed CWM recovery using odin.
Please advice that will there be any issues if I flash Cynogenmod 10.2 now?.
Any help on this? Please.
mpadhu said:
Any help on this? Please.
Click to expand...
Click to collapse
Unless you are trying to unroot your phone it is fairly safe to say Yes to both.
If you already have the custom rom of your choice able to be flashed, then you should just go ahead and flash it instead of rebooting and this message should not be seen again.
---------- Post added at 09:30 AM ---------- Previous post was at 09:22 AM ----------
boomboomer said:
Don't use rom manager on the s3.
Click to expand...
Click to collapse
I have seen this a couple of times on this forum... I have recently switched from TWRP to CWM recovery. The reason that I switched was due to TWRP having updates that bork major parts of the phone. I used TWRP for over a year on this phone. Now that I use CWM, the only thing that I have noticed different is that the updates seem to be more quality controlled for CWM than TWRP...
With that said, do you care to elaborate on your advice to use TWRP over CWM?
Do you have any further reasoning on your advice?
Thanks!
Edit: As far as the APK component to each recovery, Rom Manager updates CWM without issue. I could never get goomanager to update twrp properly. I chalked it up to bad programming... *Shrug* Not really an issue for me, but it tells me a thing or two about quality control...
t1n0m3n said:
Unless you are trying to unroot your phone it is fairly safe to say Yes to both.
If you already have the custom rom of your choice able to be flashed, then you should just go ahead and flash it instead of rebooting and this message should not be seen again.
---------- Post added at 09:30 AM ---------- Previous post was at 09:22 AM ----------
I have seen this a couple of times on this forum... I have recently switched from TWRP to CWM recovery. The reason that I switched was due to TWRP having updates that bork major parts of the phone. I used TWRP for over a year on this phone. Now that I use CWM, the only thing that I have noticed different is that the updates seem to be more quality controlled for CWM than TWRP...
With that said, do you care to elaborate on your advice to use TWRP over CWM?
Do you have any further reasoning on your advice?
Thanks!
Edit: As far as the APK component to each recovery, Rom Manager updates CWM without issue. I could never get goomanager to update twrp properly. I chalked it up to bad programming... *Shrug* Not really an issue for me, but it tells me a thing or two about quality control...
Click to expand...
Click to collapse
Rom manager isn't cwm recovery, they're 2 different things. It's better to install cwm recovery through means other than rom manager to avoid problems. The advice wasn't against using cwm recovery.
dxppxd said:
Rom manager isn't cwm recovery, they're 2 different things. It's better to install cwm recovery through means other than rom manager to avoid problems. The advice wasn't against using cwm recovery.
Click to expand...
Click to collapse
Hence the statement:
"As far as the APK component to each recovery, Rom Manager updates CWM without issue. I could never get goomanager to update twrp properly. "
dxppxd said:
It's better to install cwm recovery through means other than rom manager to avoid problems.
Click to expand...
Click to collapse
My point is that of the two, Rom Manager is the one that works. I have never had issues using Rom Manager to install recoveries. Although, I always install the first time using fastboot... So my anecdotal impressions may not apply here.
Care to explain your statement? (Which is the intent of my original message. Why the Koushik XDA witchhunt?)
I would search, but XDA search is borderline unusable.
Thanks!
boomboomer said:
Stock firmware will restore stock recovery on next boot, suggest you read and understand the basics before you damage your phone.
Don't use rom manager on the s3.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
None of the stock roms I've used have ever tried to restore stock recovery, it's just left there from other devices that do it.
t1n0m3n said:
Unless you are trying to unroot your phone it is fairly safe to say Yes to both.
If you already have the custom rom of your choice able to be flashed, then you should just go ahead and flash it instead of rebooting and this message should not be seen again.
Click to expand...
Click to collapse
Thank you. I am planning to flash Cynogenmod 10.2. Hope everything goes fine. I have taken a backup of my ROM. Attached file is the pic of the backup messages. Please let me know if the backup was fine.
When asked those i always select "no" to both. Never had an issue.
mpadhu said:
Thank you. I am planning to flash Cynogenmod 10.2. Hope everything goes fine. I have taken a backup of my ROM. Attached file is the pic of the backup messages. Please let me know if the backup was fine.
Click to expand...
Click to collapse
Looks like a successful backup to me.
t1n0m3n said:
Looks like a successful backup to me.
Click to expand...
Click to collapse
Thank you. I have successfully flashed Cynogenmod 10.2.
I can see my old android files still present in the internal memory. I did wipe data/factory reset, wipe cache partition and wipe dalvik cache but still the files are present. Will it cause any problem if I remove those files? If No will a factory reset work to remove those files?