i am able to root my mobile s7562 and install superuser but when i try to install custom rom like pmp light or ultra (CWM from external sd)i am getting the problem of verification failed installation aborted.
there is no advance option in cwm for wipe Dalvik CACHE.
also option of toogle verification is not there .
kindly guide how i should further proceed for custom ro installation.
puneet3480 said:
i am able to root my mobile s7562 and install superuser but when i try to install custom rom like pmp light or ultra (CWM from external sd)i am getting the problem of verification failed installation aborted.
there is no advance option in cwm for wipe Dalvik CACHE.
also option of toogle verification is not there .
kindly guide how i should further proceed for custom ro installation.
Click to expand...
Click to collapse
The option to wipe Dalvik cache is in advanced tab, the option to toggle verification is after choose install zip from sdcard.
Related
Hey All,
Sorry if this has been posted before.
I am currently running paranoid android 4.2.2 and i want to change to sentinelrom v4.80. the phone is rooted, i have done a factory reset, i am using CWM as my recovery system. i have wiped the cache and dalvik cache also but when i try to install the zip file it keeps coming up installation aborted and signature verification failed (i have enabled that)
Any help would be greatly appreciated
Paul
Hi,
Did u try to toggle signature verification off? It's in CMW -> install zip from sdcard -> toggle signature verification. I'm running ClockworkMod Recovery 6.0.1.2.
I don't know what in did but it seemed to have worked. Froze a few times to begin with but seems OK now. Thanks for the help!
Help me Please !!!
my Gionee Pioneer P2 run on android 4.2.2 and it use CPU MTK6577, after I installed Chainfire3D then it rebooted and got stuck at the logo Gionee , I rooted my phone but I did'nt install CWM or any custom RecoveryI just have the standard system recovery, I can boot into the standard system recoverywith the menu :
- reboot system now
-apply update from ADB
-apply update from sdcard
-apply update from sdcard2
-wipe data/factory reset
-wipe user cache
-backup user data
-restore user data
- I tried to wipe data/factory reset but it still got stuck at the logo
- I used apply update from sdcard with other rom but I got
"Installation aborted"
- I push file zip to install throught ADB but still I got "Installation aborted"
- is there any way for me to install ClockWordMod for my phone in this case ? to install custom Rom
-someone plese help me !
-sorry if there is anything wrong in my english.
Hi,
I try to install custom rom in my Galaxy S3.
I do this steps:
1. I have to Root my phone, I check with root checker app and all i OK.
2. Install GooManager from store and install openrecoveryscript
3. Downloaded omni rom: omni-4.4.2-20140320-i9300-NIGHTLY
4. Uploaded room on SD card in my phone.
5. Start phone in recovery mode and do: "wipe data/factory reset"
6. After wipe data, i have try to: "apply update from external storage" and chose omni zip file
7. I recive an error: failed to verify whole-file signature signature verification failed
EDIT:
Also I have try this way:
1. root my phone
2. install twrp
3. From TWRP menu chose: reboot/recovery
4. From recovery menu "update package from external storage" and chose omni file
5. Still recive same error, i try with two different omni builds.
djsowa01 said:
Hi,
I try to install custom rom in my Galaxy S3.
I do this steps:
1. I have to Root my phone, I check with root checker app and all i OK.
2. Install GooManager from store and install openrecoveryscript
3. Downloaded omni rom: omni-4.4.2-20140320-i9300-NIGHTLY
4. Pploaded room on SD card in my phone.
5. Start phone in recovery mode and do: "wipe data/factory reset"
6. After wipe data, i have try to: "apply update from external storage" and chose omni zip file
7. I recive an error: failed to verify whole-file signature signature verification failed
EDIT:
Also I have try this way:
1. root my phone
2. install twrp
3. From TWRP menu chose: reboot/recovery
4. From recovery menu "update package from external storage" and chose omni file
5. Still recive same error, i try with two different omni builds.
Click to expand...
Click to collapse
(1) What phone model do you have?
(2) When you flash roms you do not need to root your phone! roms come already rooted you only root if you are going to stay on stock rom and install root apps.
(3) Don't use apps to install roms use recovery PhilZ,Cwm,Twrp
Dont know much about Twrp but in other recoveries it should say install zip not update zip (Twp might be different)
1. I have I9300
2. Ok.
3. I use TWRP application to enter into recovery mode. When I chose reboot/recovery from app menu then my phone is rebooting and entering into recovery mode.
There is only "update" option in recovery menu, other options is:
-reboot system now
-apply update from ADB
-apply update from external card
-wipe data/factory reset
-wipe cache partiotion
-apply update from cache
Thats the stock recovery.
Cwm, twrp, philz recovery are not apps. They are recoveries you must flash that will substitute the stock recovery.
Look into the stickies, philz touch recovery post, etc to see how to flash the recovery you want.
djsowa01 said:
1. I have I9300
2. Ok.
3. I use TWRP application to enter into recovery mode. When I chose reboot/recovery from app menu then my phone is rebooting and entering into recovery mode.
There is only "update" option in recovery menu, other options is:
-reboot system now
-apply update from ADB
-apply update from external card
-wipe data/factory reset
-wipe cache partiotion
-apply update from cache
Click to expand...
Click to collapse
Ok please read the stickies/guides about flashing roms you are not doing it right you need to do a full wipe including system but please read up on how to do this or you will be left without a rom/system on your phone. (And always backup your old rom and efs very very important!! )
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
dxppxd said:
Thats the stock recovery.
Cwm, twrp, philz recovery are not apps. They are recoveries you must flash that will substitute the stock recovery.
Look into the stickies, philz touch recovery post, etc to see how to flash the recovery you want.
Click to expand...
Click to collapse
+1
Help needed . Mango is rooted and bootloader unlocked . as the installation instruction say , flashed the .img file , went into recovery , cleared the necessary things . selected zip installation and selected the file . the file opens but I get a message " Installation Aborted " .
Please suggest me possible solutions for the same .
ss2taj said:
Help needed . Mango is rooted and bootloader unlocked . as the installation instruction say , flashed the .img file , went into recovery , cleared the necessary things . selected zip installation and selected the file . the file opens but I get a message " Installation Aborted " .
Please suggest me possible solutions for the same .
Click to expand...
Click to collapse
Hmmm....in recovery do this....
1. Full Wipe/Factory Reset
2. Wipe Cache
3. Wipe Dalvik Cache
4. In Mounts And Storage, Format....
a. System
b. Data
c. Cache
5. Flash The Rom
6. Flash Gapps
7 Reboot into System....
dfdf
Hi Guys,
I have a serious issue on my Lenovo A6000,
I Just Installed Custom ROM of VIVO (Vivo 1.7.26) from techolaty dot net
in the same time i m forget to install gapps. Now i cant go to CWM,
Now VIVO (in my Lenovo A6000) have some problems,
camera is not working (it says Unfortunatly closed)
and gapps.
When i go to System recovery mode by pressing Volume Up+Volume Down+Power buttons,
it's Showing 4 Options,
as
Reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
apply update from sdcard
i don't know how to apply from ADB
when go to apply update from sdcard (after wiping cache and data reset)
it saying
E:failed to varify whole-file signature
E:signature verification failed
installation aborted.
what can i do now?
Kindly help me if is there any solution.
The Crew said:
Hi Guys,
I have a serious issue on my Lenovo A6000,
I Just Installed Custom ROM of VIVO (Vivo 1.7.26) from techolaty dot net
in the same time i m forget to install gapps. Now i cant go to CWM,
Now VIVO (in my Lenovo A6000) have some problems,
camera is not working (it says Unfortunatly closed)
and gapps.
When i go to System recovery mode by pressing Volume Up+Volume Down+Power buttons,
it's Showing 4 Options,
as
Reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
apply update from sdcard
i don't know how to apply from ADB
when go to apply update from sdcard (after wiping cache and data reset)
it saying
E:failed to varify whole-file signature
E:signature verification failed
installation aborted.
what can i do now?
Kindly help me if is there any solution.
Click to expand...
Click to collapse
There isn't much about your device on XDA
Here are links to a couple of threads
How to root lenovo a6000
and
[Q] How to root lenovo A6000
Because there is not a specific forum for your device, this thread will be moved to Android Q&A, Help & Troubleshooting
there is solution dont worry.u have to follow these below steps
1)download an official lenovo a6000 rom(kitkat or lollipop whatevr i recommend kitkat)
2)use adb(android debug bridge) or sd card to apply the new update
3)it will take 3-4 minutes...then your done..
hope it works...it worked for me.
The Crew said:
Hi Guys,
I have a serious issue on my Lenovo A6000,
I Just Installed Custom ROM of VIVO (Vivo 1.7.26) from techolaty dot net
in the same time i m forget to install gapps. Now i cant go to CWM,
Now VIVO (in my Lenovo A6000) have some problems,
camera is not working (it says Unfortunatly closed)
and gapps.
When i go to System recovery mode by pressing Volume Up+Volume Down+Power buttons,
it's Showing 4 Options,
as
Reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
apply update from sdcard
i don't know how to apply from ADB
when go to apply update from sdcard (after wiping cache and data reset)
it saying
E:failed to varify whole-file signature
E:signature verification failed
installation aborted.
what can i do now?
Kindly help me if is there any solution.
Click to expand...
Click to collapse
Well, you must disable signature verification, then re-flash. If it still does not work, try with a different recovery.
OR follow these instructions on how i fixed a bricked a6000:
"forum.xda-developers.com/chef-central/android/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247/page5#post65072225"
To download+install and learn how to use the minimal ADB and fastboot check out techolacy:
Download+install - "www.techolaty.com/94/minimal-adb-and-fastboot-tutorial.html"
Using the ADB - "www.techolaty.com/1481/how-to-install-cwm-root-lenovo-a6000-smartphone.html"
NOTE: If you're not good with adb, this will help you to fix the bricked phone (re-guarding the above link in xda)
*Read the websites carefully*(Line by line, trust me you dont want to miss anything)
I really hope this helps! :fingers-crossed: