Hi Friends,
I m using A116 canvas HD. Everything is fine. But when I m charging, the touch screen is not responsive at all. if i click at one spot its not working , but in other spot it works. Is this a known issue in canvas HD. Or is there any patch or software fix for this issue. pls help me.
Same Problem!
machi vijay said:
Hi Friends,
I m using A116 canvas HD. Everything is fine. But when I m charging, the touch screen is not responsive at all. if i click at one spot its not working , but in other spot it works. Is this a known issue in canvas HD. Or is there any patch or software fix for this issue. pls help me.
Click to expand...
Click to collapse
I am also experiencing this same problem with my MMX Canvas HD and my other KArbonn A21 as well.
Please some dev help us solve this issue
Simple just use original charger ....
touch work defiantly... Same problem ...fix by buy new original charger....
Sent from my Micromax A116 using xda premium
---------- Post added at 06:47 PM ---------- Previous post was at 06:43 PM ----------
Good advice to u...use original charger ...it is increase battery life...as well as decrease chances of touch screen senses problem...
Sent from my Micromax A116 using xda premium
I am also experiencing the same problem, even though i use original MMX charger
It's Due to one thing!
Once try to charge the chd With an voltage stablizer
with the specific V or W written on charger
Even inour houses the current isn't stable
that cause misbehaviour of the phone
i charge my phone via laptop or PC
Cause they charge it visely with a constant flow
Try once
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Me:- Raghav Goyal
Press Thanks button Please! :good:
Hardware OR software???
:cyclops:I am using mmx a110Q and having same problem,but when i flashed custom rom it was solved.So this might be software Issue.
machi vijay said:
Hi Friends,
I m using A116 canvas HD. Everything is fine. But when I m charging, the touch screen is not responsive at all. if i click at one spot its not working , but in other spot it works. Is this a known issue in canvas HD. Or is there any patch or software fix for this issue. pls help me.
Click to expand...
Click to collapse
akshay961 said:
I am also experiencing this same problem with my MMX Canvas HD and my other KArbonn A21 as well.
Please some dev help us solve this issue
Click to expand...
Click to collapse
ch3tan007 said:
I am also experiencing the same problem, even though i use original MMX charger
Click to expand...
Click to collapse
digyvijaykumar123 said:
:cyclops:I am using mmx a110Q and having same problem,but when i flashed custom rom it was solved.So this might be software Issue.
Click to expand...
Click to collapse
try different place for charging because when voltage was not proper in may happens....
use direct charging means dont use extension or anything then try...
it is not any software problem... it is hardware problem...
hope it will help you...
sp1312 said:
try different place for charging because when voltage was not proper in may happens....
use direct charging means dont use extension or anything then try...
it is not any software problem... it is hardware problem...
hope it will help you...
Click to expand...
Click to collapse
I am using Qmobile A600 in Pakistan which is replica of Micromax canvus A116 HD it experiences same charging issue in pakistan whatever the voltage is stable of not. The problem might be at hardware manufacturing end.
machi vijay said:
Hi Friends,
I m using A116 canvas HD. Everything is fine. But when I m charging, the touch screen is not responsive at all. if i click at one spot its not working , but in other spot it works. Is this a known issue in canvas HD. Or is there any patch or software fix for this issue. pls help me.
Click to expand...
Click to collapse
It is a known issue which exists in older versions of the phone's firmware. It is fixed in newer versions. Upgrade your phone to Android 4.2 and you should see it fixed.
---------- Post added at 10:40 PM ---------- Previous post was at 10:35 PM ----------
sp1312 said:
try different place for charging because when voltage was not proper in may happens....
use direct charging means dont use extension or anything then try...
it is not any software problem... it is hardware problem...
hope it will help you...
Click to expand...
Click to collapse
it is a software problem. Remember the TPUpgrade app which updated the touchpad drivers of all the canvas phones which upgraded from Android 4.1 to 4.2. It's main purpose was to fix this voltage fluctuation issue.
Related
hi all, just asking for a problem now...
My camera stopped working, i can view only black, black and black
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However, when i open htc camera my device slows up a lot, then if i close htc camera all become normal.
So i don't know how to solve this, i hope only that isn't an hardware fault as cmonex said and hope anyone can help me and my athena's camera to live again.
Thanks for reading,
Michele.
Have you tried a hard reset?
For what is worth, my camera also doesn't work - it looks just like yours - black.
I have your ROM installed and I always assumed that is somehow ROM related, but I haven't really tried the camera when I got my Athena (it's not really important for me...) first time I have tried to use it was when I already flashed 1.88 ROM and now with 2.04 ROM.
My camera stopped and i saw just a green screen when i do a soft reset it is start again , i use the micky lastest rom , And in this day I see some buges on camera
it doesn't depend upon my rom, tried to change some roms (original too) but nothing, it remain black
I have been using MiChY's ROM 2.04 MiChY Diamond Edition (5.2.20273, build 20273.1.3.3), camera works normally.
have you tried another camera software like CoolCamera
Time to visit the service centre.
i can't even get my camera to initialise!!!
It was fine until I upgraded the spl in order to play with the new roms. Surely the balance of probabilty would suggest that a hardware failure is less likely than a problem with spl or the rom?
Even downgrading the spl and using michy's rom has not helped
Is it posible to manually install the camera?
i never changed spl. Only installed 1.2 olipro, from there no other change to spl.
I do not remember if my athena has fallen down but i think not.
So this is an internal problem. Now i can view, not only i have this problem too...hope to find a solution
michyprima said:
i never changed spl. Only installed 1.2 olipro, from there no other change to spl.
I do not remember if my athena has fallen down but i think not.
So this is an internal problem. Now i can view, not only i have this problem too...hope to find a solution
Click to expand...
Click to collapse
I would suggest you and the likes try flash back the factory ROM on the device and see if that helps any. If it does from there, you can start fine tuning to see excatly what's going on. Just my 2 cents, and today I noticed some green lines but that might have been due to me focusing on my monitor at work to snap a shot of the webpage I was on. I'm using AP 4.0 with 3.5SPL if anyone's curious. Again just my 2 cents but you guys should give it a shot, just to see if that kicks it back in.
flashed a lot of roms, wm6 original too. nothing, forever the same...
dry joints?
Hi Michy,
Sorry to hear about your problem, I'm not sure that your camera problems are from rom faults as my camera is fine on 2.04. the camera on our units only connect to the mother board via a pressed together joints. This could be what is wrong. Are you brave enough to take your unit to bits? its actualy quite easy if you follow the service manual and have the correct tools, then just whipe the contacts to the camera and board clean with a cotton bud. I had the same fault on another HTC unit and this worked. however it may not though!
Regards
Jay
strange...
when I have the time i'll open it...
but...I noticed that the camera flash works, I think if is this camera's flash do not works...
mah!
WM 6.1 has a policy setting you can use to disable camera among others. You are sure you haven't set this "deny camera" policy?
Probably not as this would be reset when you install a new rom.....
hehe, if my rom have camera disabled, other users could have my problem too
Mine also have this problem....
Anyone can solve this problem??????
responderman said:
Hi Michy,
Sorry to hear about your problem, I'm not sure that your camera problems are from rom faults as my camera is fine on 2.04. the camera on our units only connect to the mother board via a pressed together joints. This could be what is wrong. Are you brave enough to take your unit to bits? its actualy quite easy if you follow the service manual and have the correct tools, then just whipe the contacts to the camera and board clean with a cotton bud. I had the same fault on another HTC unit and this worked. however it may not though!
Regards
Jay
Click to expand...
Click to collapse
Hi responderman,
I have dismantled my Dopod u1000 (athena x7500) to bits a few times. I am having camera problems. But i noticed that the camera is connected to the flash and appears to be soldered onto the main board. I tried wiping the back portion of the camera believing it to be where the cmos sensor is located but did not notice any feedbacks on my lcd screen showing that my wiping action is affecting the camera in anyway. As for removing the camera and cleaning the connections i haven't tried that because as i said, it appears to be connected to the flash and the flash appears to be soldered onto the main board.
Any ideas or info? Thanks!
I also have my camera broken, only after a month I bought it, it started showing some green effect though it barely showed the image, even after hard reset, ROM change there was no change, recently my device fell from a table, and since that I have the same screen as Michy's, most of the time Camera doesn't initialize.
I believe it is camera hardware that is broken.
well i think that too. for that i'm not trying to restore it anymore. if anyone got it to work, plz share
Hi guys,
I'm having serious trouble with my Droid RAZR lately (started like 2 weeks ago).
People have a hard time hearing my while in a phone call, I basically got to yell in the phone for them to hear me
Interesting piece of trivia, as I'm doing some test atm : When I call someone I can hear myself very clearly in my own speaker while it's very very low on the other phone.
So i guess the microphone is working properly from a "mechanical" point of view. I've tried a Skype call, seems ok to me so I guess it's a "software" problem
Does anyone ever encounter this problem ?
Few more technical info, phone is ROOTED Droid RAZR XT910 (GSM, bought in France):
Android 2.3.6
System version : 651.167.22XT910.retail.en.FR (Stock ROM)
Kernel : 2.6.35.7-g24431a2
Build : 6.5.1-167_SPU-15-M2-1-FR
Thank you for your time and help guys.
Cheers,
Boris.
Dian Z said:
Hi guys,
I'm having serious trouble with my Droid RAZR lately (started like 2 weeks ago).
People have a hard time hearing my while in a phone call, I basicaly got to yell in the phone for them to hear me
Interresting piece of trivia, as I'm doing some test atm : When I call someone I can hear myself very clearly in my own speaker while it's very very low on the other phone.
So i guess the microphone is working properly from a "mechanical" point of view. I've tried a Skype call, seems ok to me so I guess it's a "software" problem
Does anyone ever incounter this problem ?
Few more technical info, phone is ROOTED Droid RAZR XT910 (GSM, bought in France):
Andorid 2.3.6
System version : 651.167.22XT910.retail.en.FR (Stock ROM)
Kernel : 2.6.35.7-g24431a2
Build : 6.5.1-167_SPU-15-M2-1-FR
Thank you for your time and help guys.
Cheers,
Boris.
Click to expand...
Click to collapse
Hi, have you ever tried a new Rom? What you did so far to fix this issue? Did you a factory reset? Let me know. Since its working fine on skype this really seems to be a software related issue.
Cheers
Enviado de meu XT910 usando o Tapatalk 2
I haven't done anything yet other that looking for a solution on the Internet and trying to find out if it's a mechanical or software problem.
The microphone holes are in front and back on the RAZR, so I try removing my protective case (which blocks the hole on the back of the phone) but it's the same. The holes are clean btw, no dust or anything inside from what I can tell.
I'll probably back everything up and try a factory reset if no one has encounter this problem before (I thought I would wait for XDA guy's opinion first).
I had the same issue on mine. Just flash the correct Baseband or Firmware for your Region and you'll be fine.
Gesendet von meinem XT910 mit Tapatalk 2
So factory reset right ?
Sent from my Transformer TF101 using XDA
Factory Reset won't change your Baseband. You can try to reset, but the problem would still be the same.
I've flashed another Rom to solve that. To be sure your mic is definitely not defect, try an voice recorder an listen your record
https://play.google.com/store/apps/details?id=de.fun2code.android.voicerecord
In this Thread, you find 2 Fastboot Files. First I've posted got Baseband 93, the second 91.
http://forum.xda-developers.com/showthread.php?p=26893183
Flash that Fastboot, that has NOT your actual Baseband with RSD.
You also can try to flash only the Radio.img over Fastboot. There's an nice Thread in Dev section about this.
http://forum.xda-developers.com/showthread.php?p=20652740
Gesendet von meinem XT910 mit Tapatalk 2
Thx you guys for your replies.
I have some searching/learning to do on how to flash and do all this... or I'll probably end up bricking the thing ^^. Plus I've read somewhere that SafeStrap is only for CDMA version and I got it installed with the rooting process so it's kind of a mess right now.
So I'll set everything straight, get all software needed (RSD etc..) and try to flash a fastboot. I got Baseband version 93P so I'll probably try the one you provided on the thread you linked HSD-Pilot, thx man.
I'll let you know what happens .
Oh and I've tried the voice recorder and it kinda works, only I got to yell in the damn phone for the VU-Meter to move. So it's just like while calling someone.
OK so I just tried flashing a fastboot file, this one:
Code:
SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
I know it's the same baseband (93P) but I wanted to try with the latest version I could find.
No surprise, it didn't change anything.
I'm downloading the fastboot with baseband version 91P (the one provided by HSD Pilot), I'll try flashing this tonight see want it does.
Related question : Is this normal that the fastboot flash didn't remove all my application and all my stuff ? I thought it was a way to get the phone back what it was out of the shop ?
It's no Full Flash Rom, so it won't touch your internal SD.
Gesendet von meinem XT910 mit Tapatalk 2
I just did a flash with the file you provide HSD-Pilot (91P Baseband) and it's the same.
I hear myself in my own phone (very clearly, again... so the internal mic is working pretty well) but the guy on the other side won't hear me if I don't yell in the phone...
I think I'll put in back full stock and return it to the store... don't know what else to do.
Here is some kind pf proof that the microphone works :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's a screenshot from an app that is suppose to find out own much noise the mic is picking up, you can see the min (36 dB) and max value (101 dB) is when I blow air with my mouth where the mic hole is located on the phone.
Im experience similar problem. When I answer with my left ear pepole having hard time hearing me, then I just change ear and they can hear me perfect. Even if I change back to my left ear.
Very annoying!
Anyone else having this problem?
Soulwar said:
Im experience similar problem. When I answer with my left ear pepole having hard time hearing me, then I just change ear and they can hear me perfect. Even if I change back to my left ear.
Very annoying!
Anyone else having this problem?
Click to expand...
Click to collapse
One possibility:
Finally decided to take it back to the shop.
SO I'm getting it back to stock and just "bricked it". I'm having a cdt.bin_signed" -> Phone return FAIL in RSD Lite.
Soulwar said:
Im experience similar problem. When I answer with my left ear pepole having hard time hearing me, then I just change ear and they can hear me perfect. Even if I change back to my left ear.
Very annoying!
Anyone else having this problem?
Click to expand...
Click to collapse
Makes me think, it might have to do with the proximity sensor that cuts off the screen when you cover it. Switching from left to right ears "uncovers" it, the screen turn back on, something to do with the microphone might get altered at the same time and BAM it works fine with your right ear...
Yeah no I'm crazy...
Got out of trouble thanks to this http://sbf.droid-developers.org/
So big thanks to Skrilax_CZ for all those fastboot file !
Hi,
Some of you might remember me asking in the forum to solve the IMEI problem on a Galaxy S3 NOT REGISTERED ON NETWORK.
I was not able to solve the problem even though I tired the impossible.
I came across a YouTube video repairing IMEI using a software and a piece of software and I was very impressed what this tool can do!!
So, I decided to buy it which had cost me 100$, but even though if it didn't help me solve my problem, I will most certainly need it in the future for ton of things.
It's called BST Dongle.
Now, I saw some videos on YouTube but I can’t see how do you connect the UART r523k
I have that cable and I connect it to that piece of hardware which has 4 ports.
1 port service cable and 1 port USB OUT (I put the UART R523K there and I connected the other end to my phone)
1 port USB IN 1 PORT USB OUT, What do I put there?!!
Please I need help.
UART Cable
clouds73 said:
Hi,
Some of you might remember me asking in the forum to solve the IMEI problem on a Galaxy S3 NOT REGISTERED ON NETWORK.
I was not able to solve the problem even though I tired the impossible.
I came across a YouTube video repairing IMEI using a software and a piece of software and I was very impressed what this tool can do!!
So, I decided to buy it which had cost me 100$, but even though if it didn't help me solve my problem, I will most certainly need it in the future for ton of things.
It's called BST Dongle.
Now, I saw some videos on YouTube but I can’t see how do you connect the UART r523k
I have that cable and I connect it to that piece of hardware which has 4 ports.
1 port service cable and 1 port USB OUT (I put the UART R523K there and I connected the other end to my phone)
1 port USB IN 1 PORT USB OUT, What do I put there?!!
Please I need help.
Click to expand...
Click to collapse
Did you ever figure it out? I need help, too!
Thank you,
dovid said:
Did you ever figure it out? I need help, too!
Thank you,
Click to expand...
Click to collapse
Yes I did.
I ended up buying the software and hardware for 100$ or something. I figured out that me and my family we all use the Samsung phones, so in the future I can fix almost any problem and that tool supports Samsung and HTC, so I took it as an investment
I was able to fix the IMEI thing in less then a minute.
B"H
Hi, would you be kind enough to share? I have the BST kit, but just like you, I cannot figure out how to use the UART cable. Any help would be appreciated.
Thank you,
dovid said:
B"H
Hi, would you be kind enough to share? I have the BST kit, but just like you, I cannot figure out how to use the UART cable. Any help would be appreciated.
Thank you,
Click to expand...
Click to collapse
It's very simple. If you want I can fix ur phone using the kit remotely using teamviewer or something. If you agree, send me in a PM ur email address and we will talk. But there's one thing is missing in that kit and it's the USB A-B cable which you have to buy (it's very cheap).
It's the same cable used for the printer, so maybe you can borrow it from there!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Get the cable first and then contact me.
B"H
Thank you. Already have that cable (like you said, from the printer). But, my computer is not recognizing the phone via BST. I insert the UART 523 cables into the box/microUSB into the phone, and then the printer cable into the computer.
I hear a beep, but when the software asks me to "connect to device", the dialog box pops open, and then I select a com-port, which always ends up with an error message.
Also, on BST website, they state not the Android 4.4.2 requires some soldering of the box to work.
Are you familiar with this?
http://forum.gsmhosting.com/vbb/f891/attention-uart-4-4-2-needs-soldering-1830484/
Thank you,
dovid said:
B"H
Thank you. Already have that cable (like you said, from the printer). But, my computer is not recognizing the phone via BST. I insert the UART 523 cables into the box/microUSB into the phone, and then the printer cable into the computer.
I hear a beep, but when the software asks me to "connect to device", the dialog box pops open, and then I select a com-port, which always ends up with an error message.
Also, on BST website, they state not the Android 4.4.2 requires some soldering of the box to work.
Are you familiar with this?
http://forum.gsmhosting.com/vbb/f891/attention-uart-4-4-2-needs-soldering-1830484/
Thank you,
Click to expand...
Click to collapse
Give me few minutes, I'm coming home now!
clouds73 said:
Give me few minutes, I'm coming home now!
Click to expand...
Click to collapse
I'm not familiar with that at all and never knew that there're things that must be fixed with a solder! I hope this is not ur case.
Well, there is a driver called PL2303_Prolific_DriverInstaller_v1.8.0, you will find it in the drivers folder where you installed BST.
It looks like this:
Put ur phone a side for now, close the BST software and open it again, hook the usb side of the A-B Cable to ur computer and the other side to the UART and run that driver. then it will be able to recognize ur phone. It also should have a blue light on it if I recall.
U should make sure you have the latest version of BST which is : BST_V3.18.00_Setup
I hope this helps.
Did it work? does it recognize ur phone now?
nope
i have tried everything im unsure what to do. i have tried 2 different phones and i am still stuck. not sure what else i can do here.
any help
please any help for this problem
It only works of Windows 7 BTW,it will not work with 10,all the videos I have seen is on Windows 7.Just in case anyone is looking for why it might be not working on Windows 10.
Just wanting for mine to arrive,need to fix my Note 2 it has 0049** IMEI this should sort it. and handy If I need to fix anyone else phone(only HTC and Samsung).
Hey ppl,
Bought this phone quite recently and to my surprise it has sensors that don't work at all.Now after doing some research I've found out that it could be various problems, but I decided to buy a COMPLETLY NEW PROXIMITY SENSOR off internet.So after I replacing it I haven't achieved anything.This is the picture that I get when i enter *#0*# code and go into sensors.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please note that these same values (alltitude stuck at 44000m and etc) were present before and after replacing sensor with new one.Also these values are not moving at all like they should.
So my question is what the hell could this be because I've done some googling and noone really had this kind of problem.What could it be?Something to do with motherboard, software problem or something else.
My earpiece speaker is working, and it is all connecte together (sensor,earpiece its all one part , below is picture of it).If it was indeeed non-working part then probably earpiece speaker wouldn't work either.
Please help if you have any info on this matter
Thanks
malique93 said:
Hey ppl,
Bought this phone quite recently and to my surprise it has sensors that don't work at all.Now after doing some research I've found out that it could be various problems, but I decided to buy a COMPLETLY NEW PROXIMITY SENSOR off internet.So after I replacing it I haven't achieved anything.This is the picture that I get when i enter *#0*# code and go into sensors.
Please note that these same values (alltitude stuck at 44000m and etc) were present before and after replacing sensor with new one.Also these values are not moving at all like they should.
So my question is what the hell could this be because I've done some googling and noone really had this kind of problem.What could it be?Something to do with motherboard, software problem or something else.
My earpiece speaker is working, and it is all connecte together (sensor,earpiece its all one part , below is picture of it).If it was indeeed non-working part then probably earpiece speaker wouldn't work either.
Please help if you have any info on this matter
Thanks
Click to expand...
Click to collapse
My advice is if you replaced it with a brand new one and its still not working it is a software issue. Try and flash stock firmware see if that fixes it.
Funny thing is that today I did that.Went to sammobile website, found stock firmware for my country and flashed it on phone.Everything went okay and process was successful.However readings of those sensor values are still stuck and not moving.
I don't know what else to say.I mean come on, how could this be and how in the world was someone able to screw this much that changing with brand new sensor doesn't help.
Some of ideas that I have that could potentially explain why it is not working are: maybe flex cable is not completely operating that is somehow does not clip all the way and thus not enabling it to work properly.However, it is probably highly unlikely since earpiece speaker is working.
Maybe two holes for sensors are blocking sensors but then again I checked them while I was disassembling phone.
I was seeing people fixing sensor problems with fiddling with some sensor files in system directory, and by adding or modifying certain files in there it resolved their issues.
There must be some solution.Only if I knew how it got malfunctioning in the first place I would knew where to look.
Any suggestiong are very welcomed...
Okay so today I flashed XtreStoLite ROM on my phone hoping that maybe I will fix this problem.However, it hasn't improved it.My last option will be to flash different kernel on my phone.And that will be pretty much it cause I dont know what else to do since you know I mean what else is there really to be done anymore.But I'm really curious who managed to f*ck sensor this much that, how in the world are ppl capable of that.
Anyway, will keep this updating with new news just in case anyone manages to get same problem or something similar so if I somehow am able to get it working again , I'm gonna say what it is.
Cheers
malique93 said:
Okay so today I flashed XtreStoLite ROM on my phone hoping that maybe I will fix this problem.However, it hasn't improved it.My last option will be to flash different kernel on my phone.And that will be pretty much it cause I dont know what else to do since you know I mean what else is there really to be done anymore.But I'm really curious who managed to f*ck sensor this much that, how in the world are ppl capable of that.
Anyway, will keep this updating with new news just in case anyone manages to get same problem or something similar so if I somehow am able to get it working again , I'm gonna say what it is.
Cheers
Click to expand...
Click to collapse
I would reccomend trying arter97 kernel. Its a very good stable kernel.
Hi, I begin to have this exact problem a couple of days ago. Have you solved it?. I've tried everyting related to software and ROM's (not custom ones, and everything without being root) but nothing changes. I would appreciate any help. Thanks.
Rate this thread to express how you think the POCO M3's Wifi performs. A higher rating indicates that it has excellent range, throughput, and signal strength. Like when you're taking a dump in the bedroom upstairs, do your videos have to buffer or do they come through without interruption?
Then, drop a comment if you have anything to add!
It's a little bit worse than my Redmi Note 7 with a SD660, but it's good enough.
Haven't had any issues to date with WiFi and or data
I found it really good and catch really well my 5GHz wifi signal.
Really good.
Good
in my poco m3 the wifi and bluetooth suddenly got very weak signal, does anyone know how to solve this problem?
lucascerqueira said:
in my poco m3 the wifi and bluetooth suddenly got very weak signal, does anyone know how to solve this problem?
Click to expand...
Click to collapse
My M3 doesn't have wifi problems, except that the maximum downloading speed is only about 100Mbps.
Bluetooth works very well on my M3.
Maybe you can try updating MIUI, or factory reset, if both don't work, maybe you need to bring it to Xiaomi service center?
cbw said:
My M3 doesn't have wifi problems, except that the maximum downloading speed is only about 100Mbps.
Bluetooth works very well on my M3.
Maybe you can try updating MIUI, or factory reset, if both don't work, maybe you need to bring it to Xiaomi service center?
Click to expand...
Click to collapse
on Brazil hasn't a xiaomi service center, my M3 got very very weak signal on wifi/bluetooth, already did factory reset about 5 times and nothing, it's very annoying
lucascerqueira said:
on Brazil hasn't a xiaomi service center, my M3 got very very weak signal on wifi/bluetooth, already did factory reset about 5 times and nothing, it's very annoying
Click to expand...
Click to collapse
If it is hardware's issue, there is nothing you can do other than bringing it to service center for repairing.
If you still want to try fixing it with software, you can unlock the bootloader, and then use Mi Flash tool on a computer to flash the fastboot ROM, with the clean all and lock option.
cbw said:
If it is hardware's issue, there is nothing you can do other than bringing it to service center for repairing.
If you still want to try fixing it with software, you can unlock the bootloader, and then use Mi Flash tool on a computer to flash the fastboot ROM, with the clean all and lock option.
Click to expand...
Click to collapse
the issue begun on miui 12.0.6 update, before on 12.0.4 and 5 wifi/bluetooth was fine with a good reception, somethimes the issue simple goes away and after a week or two goes back with weak wifi/bluetooth, me and some m3 users have this issue with the same way
cbw said:
If it is hardware's issue, there is nothing you can do other than bringing it to service center for repairing.
If you still want to try fixing it with software, you can unlock the bootloader, and then use Mi Flash tool on a computer to flash the fastboot ROM, with the clean all and lock option.
Click to expand...
Click to collapse
EDIT: duplicate post
Rooted ?
Noru29 said:
Rooted ?
Click to expand...
Click to collapse
nop, don't want to lose miui find device service
I'm rooted and MIUI find device service works perfectly...
Very good when compared to other smartphones at the same price.
sometime wifi too weak. I dont know why
Samsung a11
And m3 phone
I am facing poor wifi reception in Poco M3 ( India). This happened suddenly.
lucascerqueira said:
in my poco m3 the wifi and bluetooth suddenly got very weak signal, does anyone know how to solve this problem?
Click to expand...
Click to collapse
Same here
I am also facing low wifi strength issue on my Xiaomi POCO M3,
suddenly the wifi connection range is decreased too much its even weaker than redmi 7 (INDIA)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
POCO M3 below