Hi , this is My Contribution for Neo L device , i make this kernel use Latest source from Sony , All What you want is available in this kernel :victory:
dont look my status as Junior Member , i never use this account since first use , So look this , dont surprised . . . . this is my first post about development , my post looks Bad
im very thanks to mechmetal for Amazing source Build , so Here we go. . . .this build i get a permissions from Mechmetal ,im very thanks for it
FUSION™ Kernel For Phoenix
/*DISCLAIMER
#include /*
* Your warranty is now void.. LOL I guess you knew it already.*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting dumped or you getting fired because your phone
* bootloops and alarm does not go off. Please do some research if you have any
* concerns about features included in my kernel before using it! YOU and only
* YOU are choosing to make these modifications.*/
1.CHANGELOG
-New COOL BOOTLOGO!! , Created By me !! Fajar jarbu
-Add SFB Net Scheduler
-Allow CPU Unaligned Access
-ARM JIT Compiler For Packet Filters
-Based On 4.1.b.0.621 (LATEST for Neo L!!! by jarbu)
-CPU VDD Levels Sysfs Interface
-Cpus NEON & Snapdragon Optimizations
-Optimized ARM RWSEM Algorithm-Optimized CRC32 Algorithm
-Proportional Rate Reduction For TCP
-Reclaim Some Ram
-Add Governors
- InteractiveX,Smartassv2
-Add IO Schedulers
- SIO,V(R)
-Update Android Drivers
-Update Jhash(Mark 2 & Non Mark)
-Update Linux Kernel To 2.6.32.60(LATEST!!)
-Update LZO
-Various Other Patches, Tweaks, Fixes...etc
-FIX Bluetooth
-FIX WIFI
-Add Snappy Compression Support For zRAM
-Apply Patches To RCU
-Change Memory Allocation Method
-Change Memory Split Method
-Enable CFQ I/O Scheduler
-Set Correct Default Min/Max CPU Frequency
-Switch To Snappy Compression For zRAM From Default LZO
-Update CWM To 6.0.3.0
-Update Snappy Drivers-CROSS BREDEER Support!
-Enable KSM For Page MErging
-DynaMic Compresion for page Caching
-OC Up to 1.6 Ghz
-Update KSM
-update LMK
-2 way Call recording
-Joystick wireless
-reconfigured Again in ALL Version
Compiled with GCC LINARO TOOLCHAIN 4.7.3
GOOD CONFIGURATION
SMARTASSv2 + SIO
*Download Link
Version v4
http://d-h.st/9gS
Version v4.1
https://www.dropbox.com/s/sxm01ypmwty4jha/Fusion v4.1.img
Version 4.2
https://www.dropbox.com/s/pvuxui4s20yufwl/Fusion v4.2.img
Link kernel Fusion™ v4.5 (Status : STABLE)(Bugfixes on v4.4 ,RAM increase again 379 before 377 )
https://www.dropbox.com/s/q1huyqpf2oojqq3/Fusion-v4.5.img
Link kernel Fusion™ v4.6 Shingeki No Kyojin Edition (Sliming Kernel For More performance and stability)
https://www.dropbox.com/s/8bnz1gbgj36vkkq/Fusion-v4.6-Mikasa.img
Fusion ULTIMATE™ L5-770T
http://d-h.st/JMQ
++++++++++++++++++++++++++++
---CONTINUED PROJECT New Version L5-770T Fusion Ultimate™
++++++++++++++++++++++++++++
FOR OTHER Build go to This gruop
https://www.facebook.com/notes/offi...22-fusion-neo-l-all-fixed-new/340102672799625
-----------------------------
Sources
587+this Tarball http://www.mediafire.com/download/477s0cs1sogavj4/Patch.tar.xz
----------------------------
If You Like My Work , Just HIT THANKS
CREDIT
-Mechmetal(Kernel)
-Wedgess(for tweak and load module)
-Cruizz xda(my teacher
-matt khojim(for link refrences)
-Anonym0us(For Some Help)
-Vishal Android Freaks (For Help)
-Tom As senior moderator for permissions post
and many more, iam forgett just PM me:good:
awesome kernel
Semangat om,this kernel is very good and stable. i use this kernel in cusrom sjb 8. very stable not random reboot. salam from lampung
Kibajuki said:
Semangat om,this kernel is very good and stable. i use this kernel in cusrom sjb 8. very stable not random reboot. salam from lampung
Click to expand...
Click to collapse
thank's for ur feedback , ill do the best for this
Is it possible to develop for booting android 4.2 nd 4.3???
Sent from my MT25i using xda app-developers app
Great job man....
you are rock,....
awesome new kernel for phoenix :good::good::good:
kalel2012 said:
awesome new kernel for phoenix :good::good::good:
Click to expand...
Click to collapse
hit thanks to master superman
Ankurcul said:
Is it possible to develop for booting android 4.2 nd 4.3???
Sent from my MT25i using xda app-developers app
Click to expand...
Click to collapse
Yup.. It's WIP by me.. And il surely help the op to get it ported to neo L if i succeeded..
By the way, congrats.. :beer:
Regards,
vishal_android freak
ronii ahmad said:
Great job man....
you are rock,....
Click to expand...
Click to collapse
hell yeahh dude
gr8 hands job mister
vishal_android freak said:
Yup.. It's WIP by me.. And il surely help the op to get it ported to neo L if i succeeded..
By the way, congrats.. :beer:
Regards,
vishal_android freak
Click to expand...
Click to collapse
thank u for some help mate ,
atmodimejad said:
gr8 hands job mister
Click to expand...
Click to collapse
thank you mister , put hands up uyee haha
Keep your great job vroh..:highfive:
BeYoung_CareRockz said:
Keep your great job vroh..:highfive:
Click to expand...
Click to collapse
yes bro , no problemo
ronii ahmad said:
asem disini banyak yg bully
Click to expand...
Click to collapse
not me, just same . . . assseloleee
Thread cleaned. Starting from now I want to see posts only in English, comprende?
vishal_android freak said:
Yup.. It's WIP by me.. And il surely help the op to get it ported to neo L if i succeeded..
By the way, congrats.. :beer:
Regards,
vishal_android freak
Click to expand...
Click to collapse
wow...wow..there is someone who will help you bro dev @Jarbu12 for kernel JB 4.2 or 4.3 :good:
it's cool man
Great!!! I hope this wonderful kernel will grow more better bro dev.
May GOD bless you my bro.
eagleeyetom said:
Thread cleaned. Starting from now I want to see posts only in English, comprende?
Click to expand...
Click to collapse
sorry for that Mate ,
broim kaskus said:
wow...wow..there is someone who will help you bro dev @Jarbu12 for kernel JB 4.2 or 4.3 :good:
it's cool man
Great!!! I hope this wonderful kernel will grow more better bro dev.
May GOD bless you my bro.
Click to expand...
Click to collapse
yeahh , i hope i can build 3.4.x use nAa source but there no zeus board config , its to hard for me , anyone to help me ill be apreciated
Dev @wedges is the one of a great developer for xplay. Try to contact him my bro dev @Jarbu12. I hope he will help you too.
Sent from my HTC One X using xda app-developers app
Related
Kernel Features:
Based on Sony Latest Source Code: 6.1.1.B.1.54 / .56 / .75 / 6.2.A.0.400.
Based on Linux Kernel Source Code: 3.0.80. (JellyBean kernel is still 3.0.08)
Compiled Using Linaro 4.7.3
FXP Recovery
Init.d Support.
Auto Root.
Auto Install for Wi-Fi Modules.
Good Battery Life.
NTFS Support
CIFS Support
Clean-Cache Support
zRam & zCache Support
Google Snappy Drivers [ICS only]
ext 2 / 3 / 4 Support.
Kernel Image Compressed Using LZO.
Governors:
Conservative
HotPlug
HotPlugX
Interactive
InteractiveX
Lazy
Lionheart
LulzActiveq
MinMax
Nightmare
onDemand
onDemandX
onDemandQ
Pegasusq
Powersave
Performance
Scary
Sakuractive
SmarassV2
Userspace
Wheatley
IO schedulers:
VR
SIO
Row
Deadline
CFQ
--------------------------------------------------------------------------------------------
Things you MUST know about:
So far none
--------------------------------------------------------------------------------------------
Recommended Governor - I/O Schduler for best performance and battery life.
You tell me, I can't make the decision since i don't own the device.
--------------------------------------------------------------------------------------------
Recommended For All Users:
To get better graphics score for 2D graphics, go to: Settings -> Developer Options -> Force GPU 2D Rendering
I used to get 270 in benchmarking score for 2D Graphics, but after enabling it, I started getting above 970 (That was the case on Xperia P)
--------------------------------------------------------------------------------------------
Known Issues:
You tell me
--------------------------------------------------------------------------------------------
Credits:
Thanks To Sony for: Kernel Source Code.
Thanks To @DooMLoRD for: Auto Root Script & Init.d Enabler Script.
Thanks To @pipi14 & @drsanket_xperia_u for: Helping me in testing.
Special Thanks To @alivanov79 For His Ramdisk.
Special Thanks To @FXP For Their JellyBean Source Code.
--------------------------------------------------------------------------------------------
Always Remember:
Please Don't mirror my files, I like to keep track of download count.
Report Bugs in this thread and I will fix them as soon as possible.
If you like my kernel please rate it
If you like my work and would like to support me ( Here ) I appreciate it
--------------------------------------------------------------------------------------------
Change Log in Second Post:
--------------------------------------------------------------------------------------------
Download Link: (Clearing Cache and Dalvik-Cache recommended)
Slidign_XU STOCK [ICS & JellyBean] & CM9.1 ROMs
--------------------------------------------------------------------------------------------
How To Flash
Flash via CWM.
You need an unlocked bootloader to use this kernel.
If you want to use Fastboot Method, extract Kernel.elf from the zip file and flash it.
--------------------------------------------------------------------------------------------
Sources: Github
Change Log:
------------------------------------------------
[25-5-2013] Version 3.5
------------------------------------------------
Updated linux kernel source code to 3.0.78
Compiled using Linaro 4.7.1. (After the failur of Linaro 4.8.1)
Enabled zCache and zRam
Added missing flags for a complete -O2 optimization.
Added Back HotplugX governor.
Added Back LionHeart Governor
------------------------------------------------
[12-5-2013] Version 3.4
------------------------------------------------
Updated linux kernel source code to 3.0.78
Compiled using Linaro 4.7.1. (After the failur of Linaro 4.8.1)
Enabled zCache and zRam
Added missing flags for a complete -O2 optimization.
Added Back HotplugX governor.
------------------------------------------------
[8-4-2013] Version 3.3
------------------------------------------------
Added Lionheart & scary governors.
Improved Battery Life.
Improved Performance.
------------------------------------------------
[5-4-2013] Version 3.2
------------------------------------------------
Added new governors: OnDemandQ - Hotplug (got it from a different source) - InteractiveTest (it's the same as InteractiveX but got it from a different source, please test it and tell me if it's better than the already included interactiveX)
Some under the hood changes
------------------------------------------------
[29-3-2013] Version 3.1
------------------------------------------------
Updated Linux Kernel Source Code To: 3.0.71
Added Nightmare and Lulzactive governor.
I suppose issues are now fixed
------------------------------------------------
[27-3-2013] Version 3 Stable.
------------------------------------------------
Updated Linux Kernel Source Code To: 3.0.70
Compiled Using Linaro 4.7.
I suppose issues are now fixed
------------------------------------------------
[24-3-2013] Version 2 Stable.
------------------------------------------------
Fixed Recovery.
Added few extra options to make kernel memory friendly.
Completed the missing options (some of the options added in kernel features were missing in version 1)
------------------------------------------------
[21-3-2013] Version 1 Test Release.
------------------------------------------------
Initial Release.
Re: [Kernel][Sony Xperia U][March -21] Sliding_XU [Stock]
Bro can u give instructions plz
Sent from my ST25i using xda app-developers app
Edited
Kernel test 2 working
Bluetooth working
Wifi working
Wifi hotspot working
Data n calls - working
manukohli said:
Bro can u give instructions plz
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Sure I wili ladd it to the first post
So far you need to flash the kernel via Fastboot by executing this command:
fastboot flash boot boot.img (if you are using test 1)
fastboot flash boot boot_Test2.img (if yo uare using test 2)
drsanket_xperia_u said:
Reserved for feedback..... Downloading
Didn't saw this coming
Click to expand...
Click to collapse
Thanks my friend, I finally got it working.
Tell me what you think of the kernel
Re: [Kernel][Sony Xperia U][March - 21] Sliding_XU [Stock]
Already download both... But dont kno wat to do... Lol... I m already rooted with cwm. .... So will I lose root if I flash fst one
--------
So far you need to flash the kernel via Fastboot by executing this command:
fastboot flash boot boot.img (if you are using test 1)
fastboot flash boot boot_Test2.img (if yo uare using test 2)
Click to expand...
Click to collapse
Through cmd prompy
Sent from my ST25i using xda app-developers app
manukohli said:
Already download both... But dont kno wat to do... Lol... I m already rooted with cwm. .... So will I lose root if I flash fst one
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
No my friend, root doesn't enable you to flash a custom kernel.
You must unlock your bootloader.
Rooting is a different process.
This kernel roots the phone (if using test 2) so don't worry about root
Re: [Kernel][Sony Xperia U][March - 21] Sliding_XU [Stock]
Tnx bro... Looks like I have to w8 till I unlock bootlooder
Sent from my ST25i using xda app-developers app
manukohli said:
Tnx bro... Looks like I have to w8 till I unlock bootlooder
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Your welcome my friend
Kernel 2 booting and working
Detailed report coming in few minutes
U can modify op now
I can confirm its booting
drsanket_xperia_u said:
Kernel 2 booting and working
Detailed report coming in few minutes
U can modify op now
I can confirm its booting
Click to expand...
Click to collapse
Thanks for confirming, now I can update OP.
Please don't forget to check if recovery is working
DeepUnknown said:
Thanks for confirming, now I can update OP.
Please don't forget to check if recovery is working
Click to expand...
Click to collapse
I had recovery preinstalled :/
After fastbooting kernel recovery is still working
(sorry I dun knw whether changing kernel affects preinstalled recovery or not)
drsanket_xperia_u said:
I had recovery preinstalled :/
After fastbooting kernel recovery is still working
(sorry I dun knw whether changing kernel affects preinstalled recovery or not)
Click to expand...
Click to collapse
No problem my friend, I suppose I will for someone to confirm it, in the end it's still in it's test phase
Yet I'm still waiting for performance & battery feedback
Re: [Kernel][Sony Xperia U][March - 21] Sliding_XU [Stock]
Battery life is so far good.... A bit better than stock... Not extremely better ( miracles dun happen overnight )
Nt experiencing lags... Games running smooth (temple run 2 and shadowgun tested, I have just these 2 :/... Nenamark 2 is 29fps ( max for stock I guess)
Antutu 7200(+-100)
M nt a fan of benchmarks bt performance is smooth overall
Since this kernel is compiled from source... It has almost equaled the stock kernel wid additional features
In the very first release
Great job ......
Re: [Kernel][Sony Xperia U][March - 21] Sliding_XU [Stock]
I had seen the kernel for Xperia P and marveled at the number of satisfied users, and was hoping you'd make one for us... And voila!! Thanks a lot, bro.
I'm current on CM, and will wait for the CM version.
Thanks a lot. :thumbup:
Sent from my Xperia U using Tapatalk 2
babu.rajiv2007 said:
I had seen the kernel for Xperia P and marveled at the number of satisfied users, and was hoping you'd make one for us... And voila!! Thanks a lot, bro.
I'm current on CM, and will wait for the CM version.
Thanks a lot. :thumbup:
Sent from my Xperia U using Tapatalk 2
Click to expand...
Click to collapse
send me the FXP kernel and you will have the kernel in your PM inbox in an hour or two
Is this going to work on C.1.0? As i know that is the fastest and the latest version,thats why i flashed it. Im looking forward to use this if you confirm thats working on C.1.0,will post feedback too.
xhk_sk said:
Is this going to work on C.1.0? As i know that is the fastest and the latest version,thats why i flashed it. Im looking forward to use this if you confirm thats working on C.1.0,will post feedback too.
Click to expand...
Click to collapse
To be honest I can't confirm anything because I don't have the device, my expectations are based on what I've seen on my Xperia P before it got bricked and also building my expectations on what users will report.
So you will have to try it out your self and if it doesn't work you can simply flash back a different kernel to make your device boot again
Re: [Kernel][Sony Xperia U][March - 21] Sliding_XU [Stock]
It worked well on Fw. 1.45 so I'm sure it work on Fw.C.1 too
---------- Post added at 10:40 PM ---------- Previous post was at 10:31 PM ----------
It seem cwm not work on version 1 on Xperia u
I confirm that it is working on C.1.0,nothing but positive feedback for now. Thank you for your work .
Hi , this is My Contribution for Neo L device , i make this kernel use Latest source from Sony , All What you want is available in this kernel :victory:
dont look my status as Junior Member , i never use this account since first use , So look this , dont surprised . . . . this is my first post about development , my post looks Bad
im very thanks to mechmetal for Amazing source Build , so Here we go. . . .this build i get a permissions from Mechmetal ,im very thanks for it
FUSION™ Kernel For Phoenix
/*DISCLAIMER
#include /*
* Your warranty is now void.. LOL I guess you knew it already.*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting dumped or you getting fired because your phone
* bootloops and alarm does not go off. Please do some research if you have any
* concerns about features included in my kernel before using it! YOU and only
* YOU are choosing to make these modifications.*/
1.CHANGELOG
-New COOL BOOTLOGO!! , Created By me !! Fajar jarbu
-Add SFB Net Scheduler
-Allow CPU Unaligned Access
-ARM JIT Compiler For Packet Filters
-Based On 4.1.b.0.621 (LATEST for Neo L!!! by jarbu)
-CPU VDD Levels Sysfs Interface
-Cpus NEON & Snapdragon Optimizations
-Optimized ARM RWSEM Algorithm-Optimized CRC32 Algorithm
-Proportional Rate Reduction For TCP
-Reclaim Some Ram
-Add Governors
- InteractiveX,Smartassv2
-Add IO Schedulers
- SIO,V(R)
-Update Android Drivers
-Update Jhash(Mark 2 & Non Mark)
-Update Linux Kernel To 2.6.32.60(LATEST!!)
-Update LZO
-Various Other Patches, Tweaks, Fixes...etc
-FIX Bluetooth
-FIX WIFI
-Add Snappy Compression Support For zRAM
-Apply Patches To RCU
-Change Memory Allocation Method
-Change Memory Split Method
-Enable CFQ I/O Scheduler
-Set Correct Default Min/Max CPU Frequency
-Switch To Snappy Compression For zRAM From Default LZO
-Update CWM To 6.0.3.0
-Update Snappy Drivers-CROSS BREDEER Support!
-Enable KSM For Page MErging
-DynaMic Compresion for page Caching
-OC Up to 1.6 Ghz
-Update KSM
-update LMK
-2 way Call recording
-Joystick wireless
-reconfigured Again in ALL Version
Compiled with GCC LINARO TOOLCHAIN 4.7.3
GOOD CONFIGURATION
SMARTASSv2 + SIO
#Download Links
Version v.4
http://d-h.st/9gS
Version v.4.1
https://www.dropbox.com/s/sxm01ypmwty4jha/Fusion v4.1.img
CREDIT
-Mechmetal
-Wedgess
-Anonymous
-vishal android freaks
:good:
2 posts not needed, mate.. Either get this one off or the one from neo development forum
Regards,
vishal_android freak
vishal_android freak said:
2 posts not needed, mate.. Either get this one off or the one from neo development forum
Regards,
vishal_android freak
Click to expand...
Click to collapse
im sorry about that mate , cause Neo-L dont have specific forum in xda , so iam confuse where i post my work :/
Jarbu12 said:
im sorry about that mate , cause Neo-L dont have specific forum in xda , so iam confuse where i post my work :/
Click to expand...
Click to collapse
That's ok.. Request the mod to delete this..
Regards,
vishal_android freak
Wow you're awesome buddy
Thx for your kernel
I hope Neo L will get specific Room in order we can feel more better. By the way thanks so much for you bro Dev @Jarbu12.
That's so cool, great work bro. So keep developing Dev.
This is the version for CyanogenMod based ROMs
Introduction
Hello dear developers and android hackers,
On this thread, I will share with you a project I am developing as I am learning kernel programming / hacking. This version of the williams kernel is based on CyanogenMod kernel sources with enhancement, mostly for battery saving.
Click to expand...
Click to collapse
Features
Based on Cyanogenmod kernel sources
Compiled with linaro GCC 4.9.1 toolchain, -O3
Frequency table from 281Mhz to 1832Mhz
Governors : interactive, ondemand, performance, conservative, lagfree, smartassV2, intellidemand2, intelliactive and lionheart
I/O schedulers : noop, deadline, cfq, V(R), row, sio, fifo
Fast hotplug
Undervolting
Dynamic fsync thank's to faux123
FauxSound thank's to faux123
Force fast charging
TWRP and CWM recovery included, fota partition support
Click to expand...
Click to collapse
Installation instructions
Code:
Use this kernel at you own risk !
I am not responsible for any damage or problem.
Flash zip via recovery
Reboot
Click to expand...
Click to collapse
Download
Recovery flashable zip :
CM11 Williams kernel v5.zip
mirror
CM10.1 Williams kernel v3.1.zip
mirror
MIUI Williams kernel v3.1.zip
mirror
Kernel Source :
Github
Click to expand...
Click to collapse
Changelog
CM Williams kernel v5 : 12.12.14 (cm11 only)
Set qcom mpdecision as default hotplug (No need to deactivate it anymore unless you want to use another hotplug )
Remove msm_mpdecision
Add fast hotplug
Increase 1.8GHz step frequency for better stability
Add FOTA recovery support (Volume down)
CM Williams kernel v4.1 : 27.11.14 (cm11 only)
Rebased on latest cyanogenmod sources
CM Williams kernel v4 : 22.07.14 (cm11 only)
Rebased on latest cyanogenmod sources
Fixed Wi-Fi
Replaced philz recovery with cwm
CM Williams kernel v3.1 : 14.06.14
Fix Sound Control
CM Williams kernel v3 : 14.06.14
Now supports cm10.1 and MIUI, please see download section
Add FauxSound. Thank's to @faux123
Small changes in acpuclock for possible better stability
CM11 Williams kernel v2 : 29.05.14
Changed frequency table : clock speeds from 281 to 1832 MHz. Thank's to @faux123 and @DooMLoRD
Add dynamic fsync thanks to @faux123
Add undervolting thanks to @DooMLoRD and @faux123
Add o3 compiler optimization
Add force fast charging, thanks to @DooMLoRD for the port
CM11 Williams kernel v1 : 27.05.14
Initial release
Check my github to see all the changes.
Click to expand...
Click to collapse
FAQ
Q : With what ROM can I use this kernel ?
A : It should work with any ROM based on CyanogenMod. See the download section for the different versions available There is also a version for Stork based ROM there
Q : What features will be added to next versions ?
A : I probably don't know. If you have a feature request, please use the devdb tab for it on the top of the thread.
Q : Your kernel isn't working / My phone isn't booting anymore
A : Read this whole post once more, search for your problem in thread and report it if you haven't found a solution.
Q : Can I install this kernel on locked bootloader ?
A : No ! This kernel is only for unlocked bootloader.
Q : Does this kernel include recovery ?
A : Yes ! You can access by pressing volume button when the lights blink. Volume up to go to CWM and Volume down to go to TWRP.
Q : What are mpdecision and fast hotplug ?
A : This is what manage your cpu cores and decide which core will be online. Fast hotplug is a brand new hotplug that I wrote. You can find more information there
Q : What are mpdecision and fast hotplug ?
A : This is what manage your cpu cores and decide which core will be online. Fast hotplug is a brand new hotplug that I wrote. You can find more information there
Q : How to control fast hotplug ?
A : I modified Pimp my Z1 to be compatible with fast hotplug. You can use it without any problem on your Xperia SP to configure fast hotplug (Power Management menu) but it might have bugs with other functions (you can still try, I haven't had problems yet ).
You can find it there
Q : Where does the name come from ?
A : This kernel isn't named after someone but after a pear. We use this pear to make one of the best swiss "eau de vie" called Williamine.
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Sony for their sources and device
* FXP team, AdFad666, uberlaggydarwin and all the others persons who participated in creating cm11
* @DooMLoRD
* @thewadegeek for his [URL="http://forum.xda-developers.com/showthread.php?t=1748297"]Tutorial[/URL]
* @show-p1984 for his mpdecision
* @dssmex
* bbedward
* Erasmux
* faux123
* Androguide.fr for Pimp my Z1
* The xda community for making me discover android and for answering so many of my questions
* Google for kernel sources and its search engine
* Apple for making expensive phone so that I never bought one of theirs
Please let me know per pm if there is any mistake or misspelled word in this thread. Automatic correction does a great job but since english isn't my motherthongue I'm pretty sure I made mistakes.
XDA:DevDB Information
Williams kernel - CM / MIUI, Kernel for the Sony Xperia SP
Contributors
pec0ra
Kernel Special Features:
Version Information
Status: Testing
Created 2014-05-27
Last Updated 2014-12-12
This is beautyfull, thanks!
EDIT: I tryed the kernel:
1) I think the splash screen is too bright;
2) The RIL doesn't work, my phone says ''no service''
If i find other bugs I'll poste them
Wytosandroid said:
This is beautyfull, thanks!
EDIT: I tryed the kernel:
1) I think the splash screen is too bright;
2) The RIL doesn't work, my phone says ''no service''
If i find other bugs I'll poste them
Click to expand...
Click to collapse
Thank's for the quick review
1) Splash screen is the same as for the other version.
2) This is because it is based on fxp 320. I'll see tomorrow if I can change this but it works great on my phone...
Thanks for the kernel!!!
Unfortunately, I've lost phone network after rebooting. In addition, changes to parameters (using fauxclock) don't survive a reboot. Of course, biggest issue is can't call/be called...
I'm on FXP 320...
EDIT: sorry, comments above were not there yet when I was writing my comments Hope you find the solution to RIL problem!
joaste said:
Thanks for the kernel!!!
Unfortunately, I've lost phone network after rebooting. In addition, changes to parameters (using fauxclock) don't survive a reboot. Of course, biggest issue is can't call/be called...
I'm on FXP 320...
EDIT: sorry, comments above were not there yet when I was writing my comments Hope you find the solution to RIL problem!
Click to expand...
Click to collapse
I'll post a test version in 5 minutes for RIL !
Edit :
Please tell me if this one works : http://www.mediafire.com/download/n26gcpj3l72h34o/cm11_williams_kernel_v1_fix_test.zip
It uses the ramdisk of fxp 319
pec0ra said:
I'll post a test version in 5 minutes for RIL !
Edit :
Please tell me if this one works : http://www.mediafire.com/download/n26gcpj3l72h34o/cm11_williams_kernel_v1_fix_test.zip
It uses the ramdisk of fxp 320
Click to expand...
Click to collapse
RIL is working. Good Job!
joaste said:
RIL is working. Good Job!
Click to expand...
Click to collapse
Thank's for the quick test !
The links of OP are updated with this working version.
Sttangely, in Faux123, I/O scheduler settings stick after reboot but governor settings do not (goes back to interactive after reboot - have been setting it to lionheart).
Am curious to see if battery performance is better or not...
Again, good job and thanks for taking the time!
Add to oc cm11 working oc
Tapatalk-kal küldve az én C5303-el
jancsessz said:
Add to oc cm11 working oc
Tapatalk-kal küldve az én C5303-el
Click to expand...
Click to collapse
Use the request feature tab !
Feature request
1. Zram
2. Fastcharging
3. KSM
4. OC
5. New governor smartassh3
Tapatalk-kal küldve az én C5303-el
jancsessz said:
Feature request
1. Zram
2. Fastcharging
3. KSM
4. OC
5. New governor smartassh3
Tapatalk-kal küldve az én C5303-el
Click to expand...
Click to collapse
No, I mean open the web browser and click on the link "feature requests" on the top of the page.
Sent from my Xperia SP using Tapatalk
Hi, would it be possible to add rear mic support into this kernel? Its currently missing in the CM11 kernel...
peters. said:
Hi, would it be possible to add rear mic support into this kernel? Its currently missing in the CM11 kernel...
Click to expand...
Click to collapse
I will take a look at it but I don't think I'll manage to fix it. It's probably not kernel related.
Btw, I will NOT add smartassH3 because it is exactly the same as smartassV2. Only the name and the tunable parameters are changed so you can edit it by yourself using any cpu control app. Plus, smartassH3 is still based on old smartassV2 which doesn't work on multicores. The smartassV2 version in Williams kernel was adapted to work on newer phones.
Can U add Intelli-KSM to save baterry?
How about antutu test? Score?
Vivaz90197 said:
Can U add Intelli-KSM to save baterry?
Click to expand...
Click to collapse
Use feature request tab to request
Sent from my C5303 using Tapatalk
question
Hi !
Is this kernel stable and does he improve battery life on cm11 fxp ?
Good work!
It is much better than all the other CM kernels for SP.
But why the I/O still not as well as the kernel of the stock .201?
Every currently CM kernel seems to have this issue...
quick feed back
I use this kernel on CM11 and it's working better than stock kernel especially for the smooth and battery life ! :laugh::good:
Tank you a lot !!
First custom CM-based kernel for SlimBean, AOSPA, AOKP and MIUI!!
Features
// Governors: hotplug, smartassH3, smartassV2, lulzactive, interactiveX, interactive, conservative, ondemandX, userspace, powersave, ondemand, performance
// IO Shedulers: noop, deadline, cfq, sio, row, vr, zen
// TS Mods from Infinity kernel
// Fastcharge!
// Increased responsiveness
// Perflock disabled
// Decreased RAM usage
// System write protection disabled
// Random tweaks
// More to come!
To use x2W mods, use this app (all credits goes to @InfinityShooter )
If it doesn't work for you, push this script via terminal (edit file first):
adb remount rw
adb push tsmods77 system/etc/init.d/
adb shell
su
chmod 0755 /system/etc/init.d/tsmods77
Click to expand...
Click to collapse
BIG thanks to:
@InfinityShooter for his Infinity kernel sources and help
@Eliminator79 for his helpful tutorial
@MattNoir for testing
@xpirt for his help (MIUI support)
Download links
V1 // Released 1/10/14
- First release
Click to expand...
Click to collapse
V2 // Released 5/10/14
- Added MIUI support
- Fixed lags
- Moved to SLUB allocator
Click to expand...
Click to collapse
V3 // Released 1/11/14
- Linux 3.0.30
- Added S2W, L2W and F2W
- Moved to touchscreen driver from Infinity kernel
- Enabled all available governors/schedulers
- CRT animation now works properly
- More fixes (see the commits)
Click to expand...
Click to collapse
V4 // Released 1/12/14
- GPU Overclock /not sure if real/
- Now compiled with Sabermod 4.7 toolchain
- Compiled with -O3 flags
- GPU Makefile flags
- Added NEON support
- Added RoW scheduler
- KSM updates
Click to expand...
Click to collapse
Source
Wow.
Nice one !,A lot of governors and I/O Schedulers are added.
OTG Support is recommended. :highfive:
Yay :laugh:
first cm kernel xD < 3 Good work!
PS:
The guy above me
You shoud make ur singature little more bigger Its takes only the half page
Eliminator79 said:
Wow.
Nice one !,A lot of governors and I/O Schedulers are added.
OTG Support is recommended. :highfive:
Click to expand...
Click to collapse
Thanks man
Yep, I wanted to make kernel that fits to taste of many users
OTG is thing that I'm planning to implement too, but I have pretty busy schedule (mostly school) right now, so no time
//.dax said:
Thanks man
Yep, I wanted to make kernel that fits to taste of many users
OTG is thing that I'm planning to implement too, but I have pretty busy schedule (mostly school) right now, so no time
Click to expand...
Click to collapse
I hope that god helps you.
---------- Post added at 09:02 PM ---------- Previous post was at 09:01 PM ----------
mefistoreyon said:
Yay :laugh:
first cm kernel xD < 3 Good work!
PS:
The guy above me
You shoud make ur singature little more bigger Its takes only the half page
Click to expand...
Click to collapse
Yep, you should also make your signature and spelling a little bit unique :cyclops:
will it work only with CM ROMS or i can try installing it with ViMiRo ROM ?
doorfixer said:
will it work only with CM ROMS or i can try installing it with ViMiRo ROM ?
Click to expand...
Click to collapse
CM-based ROMs only
Will this kernel work on miui v5 or is there any further customization required?
romy25 said:
Will this kernel work on miui v5 or is there any further customization required?
Click to expand...
Click to collapse
Sure, no additional tweaks required
Its second day of use of your kernel and my phone become a bit laggy. Not sure if other users also facing this issue.
romy25 said:
Its second day of use of your kernel and my phone become a bit laggy. Not sure if other users also facing this issue.
Click to expand...
Click to collapse
I don't know, nothing like that for me.. But I'll try to make more optimizations in next release
BTW, I started working on V2, which will come with more optimizations, revamped governors and.. probably more
Wonderful. Very much excited.
The best achievement.. It saves battery then regular cm kernel.[emoji2]
romy25 said:
Wonderful. Very much excited.
The best achievement.. It saves battery then regular cm kernel.[emoji2]
Click to expand...
Click to collapse
I'm glad that you like it
It working with CM 10.1 / cm 10.2 ?
PepinCZ said:
It working with CM 10.1 / cm 10.2 ?
Click to expand...
Click to collapse
Nope, for CM10 only as sources for 10.1/10.2 weren't released
I tried it on miui 5 rom and it doesn't support.[emoji19]
Great work! Finally a CM kernel. Unfortunately I can't use it yet as my power button isn't working, and I need S2W, so for now I'm still on vimiro. Hope you can manage S2W soon
Sent from my HTC Desire X using XDA Free mobile app
You have to release your source codes for complying with GPL. Else, this thread will get closed.
romy25 said:
I tried it on miui 5 rom and it doesn't support.[emoji19]
Click to expand...
Click to collapse
Really? That's weird, I'll try it today.. Maybe the dev changed something in kernel..
adbroot said:
Great work! Finally a CM kernel. Unfortunately I can't use it yet as my power button isn't working, and I need S2W, so for now I'm still on vimiro. Hope you can manage S2W soon
Sent from my HTC Desire X using XDA Free mobile app
Click to expand...
Click to collapse
I'll try to do my best
InfinityShooter said:
You have to release your source codes for complying with GPL. Else, this thread will get closed.
Click to expand...
Click to collapse
It would be no problem for me to publish them..
I guess I have to start learn something about Github
Using it since 3 days..... Going very smooth..... :thumbup:
EXTENDED LINEAGEOS/AOSP KERNEL
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WARNING: THIS KERNEL IS FOR LINEAGEOS/AOSP ROMS BASED ONLY
This kernel is for LINEAGEOS/AOSP ROMS ONLY !
This Kernel aims to use the best and most stable feautures of stock kernel by default and add useful features and optimizations,The idea is to keep it simple, stable and optimized. Just flash and forget !
The features Are :
Updated LINEAGEOS Kernel Sources (From Vache)
Any Kernel Installer Script
Compiled Using Latest GCC Linaro 7.2 Toolchain
Added More TCP Congestions Controls
Added ZEN I/O Scheduler
Added Wakelocks Blocker
Added Sound Control
Added KCAL Color Control
Added Backlight Dimmer
Removed additional SafetyNet flagsTo Pass SafetyNet
A Lot Of Tweaks and Optimizations
DOWNLOAD
EXTENDED LINEAGEOS/AOSP OREO KERNEL V3
Use the app EXKM or kernel adiutor to tweak the kernel!
XDA:DevDB Information
EXTENDED KERNEL LINEAGEOS/AOSP, Kernel for the Moto G5 Plus
Contributors
attack11, sultanxda , franciscofranco , vache , flar2
Source Code: https://github.com/attack11/android_kernel_motorola_msm8953
Kernel Special Features: KERNEL FOR LINEAGEOS/AOSP BASED ROMS
Version Information
Status: Testing
Created 2017-05-04
Last Updated 2017-10-12
Reserved For Changelog
20/05
-Second Release
-Updated To Latest Sources from vache
-Added Cpu Input Boost
-Added Gpu Input Boost To Msm-Adreno-Tz Gpu Governor
-Added "Spectrum" Support (Performance/Battery Profiles)
-Removed Adreno Boost
-Fixed Crash when using the app from savoca to control Kcal settings
-You can edit the spectrum profiles now (the profiles are in "/data/media/0/Spectrum/profiles")
-A lot of more optimizations,Check git!
20/05
-Third Release
-Updated To Latest Sources from vache
-Added Blu Active Governor
08/06
-Fourth Release
-Updated To Latest Sources from vache
-Added Sound Control by Flar2
-Enabled and Tweaked KSM
-Added I/O Switcher
-Switched from cpu_inpust_boost to cpu_boost (more configurable by the user)
- Some misc updates and cleanup´s
18/07
-Fifth Release
-Updated To Latest Sources from vache
-Updated From The Scrach!
-Kernel Tweaked (Interactive Cpu Gov, Sched Values,I/O)
-Removed Lot of unnecesessary stuff , Simplify the kernel
-Removed A Lot of debugging and some memory leaks fixes
-Removed KSM, FIOPS/ZEN/SIO I/O´S And ElementalX & Bluspark Cpu Govs
- Some misc updates and cleanup´s
18/07
-Sixth Release
-Updated To Latest Sources from vache (Wake Gestures & Screen Off Gestures Support)
31/08
-Seventh Release
-Updated To Latest LOS Sources from vache
-Updated From The Scrach!
-Kernel Tweaked (Again like stock Moto Rom)
-Removed Lot More of unnecesessary stuff , Simplify the kernel
- Some misc updates and cleanup´s
So far, so good! Is there any way I can activate backlight dimmer through a widget or something with EXKM?
roygbiv859 said:
So far, so good! Is there any way I can activate backlight dimmer through a widget or something with EXKM?
Click to expand...
Click to collapse
No there isnt a widget for that,sorry,You can create a profile with KA and a add a profile widget to switch to it , Like an user mentioned in the stock kernel thread !
attack11 said:
No there isnt a widget for that,sorry,You can create a profile with KA and a add a profile widget to switch to it , Like an user mentioned in the stock kernel thread !
Click to expand...
Click to collapse
IDK if it applies to this phone but from what I've looked into turbo charge has to be enabled on the kernel side
Edit: okay so it helps control the throttle process to keep the phone from overheating? I'm confused
Still here waiting for you to bring awesomeness to aosp
zeft64 said:
Still here waiting for you to bring awesomeness to aosp
Click to expand...
Click to collapse
Update will come soon .. ! :good:
attack11 said:
Update will come soon .. ! :good:
Click to expand...
Click to collapse
Yes!
# KERNEL UPDATED !
Check changelog in second post !
Please give a try and report !
attack11 said:
# KERNEL UPDATED !
Check changelog in second post !
Please give a try and report !
Click to expand...
Click to collapse
flashed on DU man. will let u know how it goes.. Thanks for ur work.
attack11 said:
# KERNEL UPDATED !
Check changelog in second post !
Please give a try and report !
Click to expand...
Click to collapse
Hey there mate I have flashed version 2 on top of DU. But I can't able to see the status of little clusters in kernel adiutor.
See the ss below.
Edit:-looks same on stock kernel too. My bad...
attack11 said:
# KERNEL UPDATED !
Check changelog in second post !
Please give a try and report !
Click to expand...
Click to collapse
You don't know how I've been waiting on this! Thanks!
---------- Post added at 07:04 PM ---------- Previous post was at 07:04 PM ----------
fAIyaZ said:
Hey there mate I have flashed version 2 on top of DU. But I can't able to see the status of little clusters in kernel adiutor.
See the ss below.
Click to expand...
Click to collapse
What's du?
fAIyaZ said:
Hey there mate I have flashed version 2 on top of DU. But I can't able to see the status of little clusters in kernel adiutor.
See the ss below.
Edit:-looks same on stock kernel too. My bad...
Click to expand...
Click to collapse
Thats weird,you should report to your ROM developer
zeft64 said:
You don't know how I've been waiting on this! Thanks!
---------- Post added at 07:04 PM ---------- Previous post was at 07:04 PM ----------
What's du?
Click to expand...
Click to collapse
du : dirty unicorns (ROM)
attack11 said:
Thats weird,you should report to your ROM developer
du : dirty unicorns (ROM)
Click to expand...
Click to collapse
Eh? Where's that rom?
attack11 said:
Thats weird,you should report to your ROM developer
Click to expand...
Click to collapse
Hey take my words back. It's not an issue with stock kernel. It's showing. I had flashed different boot which has same thing.
But yah no issues with stock kernel. I reflashed ROM to check that. So your kernel has something to look into it I guess...
zeft64 said:
Eh? Where's that rom?
Click to expand...
Click to collapse
Not everything is on XDA [emoji6]
https://devs-base.com/viewtopic.php?t=371
Send from my Motorola Moto G5 Plus (XT1685) using Tapatalk
smitharro said:
Not everything is on XDA [emoji6]
https://devs-base.com/viewtopic.php?t=371
Send from my Motorola Moto G5 Plus (XT1685) using Tapatalk
Click to expand...
Click to collapse
I know... That's why I asked. You do realize I'm not new to this right?
fAIyaZ said:
Hey take my words back. It's not an issue with stock kernel. It's showing. I had flashed different boot which has same thing.
But yah no issues with stock kernel. I reflashed ROM to check that. So your kernel has something to look into it I guess...
Click to expand...
Click to collapse
Thanks, will take a look asap :good:
attack11 said:
Thanks, will take a look asap :good:
Click to expand...
Click to collapse
I also confirm the same. Clusters don't show. It was showing in V1.
Testing the battery performance of kernel now ?
sharan.nyn said:
I also confirm the same. Clusters don't show. It was showing in V1.
Testing the battery performance of kernel now ?
Click to expand...
Click to collapse
Same here. I thought that it was a change on the app side