Related
Samsung fascinate
rooted
windows 7 with Samsung 64 bit drivers installed
back to stock DL01 and then OTA DL09 about five times today.
Here is the problem, when i mount my phone, intermittantly Windows 7 doesnt give me the pop up window that lets me view my sd card files. It gives me a pop up window with 2 choices:
Option # 1. View your files - this really doesnt let me view anything except 4 files one of them being a " Bootloader file "
Option # 2. Install Bootstrap Loader exe.
I have had my phone since september and rooted, rom"ed OTA"ed all of it and today this started happening.
When i look in Drives and Printers my phone is listed as a CD Drive and not a Mass Storage Drive.
Just curious if any one else has had this issue and what might have caused it to start happening.
I installed Samsung Kies earlier this afternoon but uninstalled it since it was pretty much worthless to fascinate owners and the U.S. isnt supported.
Any input would be appreciated. Thanks in advanced for any info.
have you tried re downloading the drivers from samsung.com? it worked for me.
This has been talked about in several places already. It is a common bug with DL09. The best solution is to flash one of adrynalyne's 1/18 test kernels found here. I hope this helps!
BTW: make sure it is one of the kernels with the cd fix
when im on 2.1 aosp, i have that same issue, to fix reboot with debugging enabled
Seems to be related to some new 'Media sync' option.
I did some playing around and the following seemed to let me 'mount'
the phones as before. ( But I dont like it. )
Hoping for some direction from Verizon tech on
a) what is media sync ?
b) how do I turn off permanently If I dont need or want to use it?
Unplug phone from usb cable.
Then on Phone... Menu...Settings..USB settings
Change to ' Ask on connection'.
then press home button.
Plug in USB cable.
When prompted...Press 'Mass storage'.
Now wait...wait..wait. Took about 30 to 45 seconds.
Annunciator bar should have usb symbol. Drag it open.
Press usb connected....Press Mount..
My laptop now recognized the SD card on E drive.
Copy files as usual.
When done...Open Anunciator bar and 'Turn Off' USB storage.
Media Sync is a mode that allows programs such as Windows Media Player and Rhapsody to access your SD card and copy over DRM protected music.
Sent from my Samsung Fascinate
Thanks for this, it worked
not sure if it helps with the problems with 2.2 but whenever i had this issue on 2.1 this is what i did, turn off your phone with the usb cable in and turn it back on with the phone still plugged in. It always seemed to work for me
From your homescreen when you hit menu go to usb settings then make sure the little radio button for mass storage device is selected. That was my problem after the latest OTA from verizon. Also it takes like 15 seconds for it to all sync up.
i have searched these forums hi and low, googled, etc. still cant find an answer....
on djo5,dl09 i was able to plug my phone into the usb port in my car, then mount my sd card, and it would automatically connect and find my music and start playing it.
on either dl30, or eb01, i cannot get it to work.
it is very frustrating. everytime i try, (all different combinations debugging on/off mass storage/ ask on connect, etc.)
i get a "device connect failed" message.
does anyone else have this issue?
has anyone been able to get this to work?
Another fix when it shows up as a CD-ROM drive is to right click and eject. Seems to work every time for me.
Sent from my SCH-I500 using XDA App
zparlet said:
not sure if it helps with the problems with 2.2 but whenever i had this issue on 2.1 this is what i did, turn off your phone with the usb cable in and turn it back on with the phone still plugged in. It always seemed to work for me
Click to expand...
Click to collapse
Thanks your idea of reboot while still plugged in saved me. Tried every other idea with no cure.
Thanks for the post.
Just installed Superclean 2.6 and had issues. I tried ejecting the CD Rom device in Windows, but that didn't work. I changed the usb settings from Mass Storage to Ask On Connection and then tried it again. This time I received the Android guy asking to mount the drive. Yay! It worked! It does however show both a CD rom drive and the mass storage drive in Windows XP.
On another note, I found that if I plug in my phone without unlocking the password first it locks up the phone until I unplug the usb cable attached to the pc.
Make sure you are using a USB cable that has a good connection (like the original one). I bought some aftermarket cables, and while they are good enough for charging, I really think they fit too loose to keep a secure connection.
apnews said:
Seems to be related to some new 'Media sync' option.
I did some playing around and the following seemed to let me 'mount'
the phones as before. ( But I dont like it. )
Hoping for some direction from Verizon tech on
a) what is media sync ?
b) how do I turn off permanently If I dont need or want to use it?
Unplug phone from usb cable.
Then on Phone... Menu...Settings..USB settings
Change to ' Ask on connection'.
then press home button.
Plug in USB cable.
When prompted...Press 'Mass storage'.
Now wait...wait..wait. Took about 30 to 45 seconds.
Annunciator bar should have usb symbol. Drag it open.
Press usb connected....Press Mount..
My laptop now recognized the SD card on E drive.
Copy files as usual.
When done...Open Anunciator bar and 'Turn Off' USB storage.
Click to expand...
Click to collapse
4GivenByChrist said:
Another fix when it shows up as a CD-ROM drive is to right click and eject. Seems to work every time for me.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Thanks guys, this combination worked perfectly for me.
Just fyi, this is due to Verizon bloatware that has been inserted I to the kernel. Adrynalyne and company managed to flush it out of the Eclair kernel, but since we don't have kernel source code for the Froyo kernel yet, there's nothing that can be done at this time. When source is available, this will be fixed by our devs.
Sent from XDA Premium on my Super Clean Fascinate
Has anyone managed to mount a USB stick in the USB port of their dock?
Every stick that works in my original Transformer, is not recognised by my Prime. It is updated to ICS and I didn't think to check it worked before updating.
Possibly a bug in ICS, or maybe a problem with the dock? What do you think?
Mine worked fine before ICS and is still working fine after ICS. This may not bode well for your USB port being functional.
After I updated to ICS and connected the dock, usb, sd card slot and the mousepad was dead, too. After it stayed connected for about 10-20minutes, it suddenly worked.
I guess when you connect the dock for the first time after ICS is installed, a silent update is running for the dock as well. A notice would have been nice though, I started panicking as well...
I just tried a USB stick via a USB adapter. It reads fine here
Thanks for all the replies, but false alarm folks!
Tried the old 'switch it off and on again' and the stick mounts properly. You'd think I would have tried that first wouldn't you? DOH
wait, so everytime i plug in my usb stick, i have to reboot the device?
Anybody else not able to mount a USB storage device in the dock unless they reboot with it plugged in?
I read somewhere that there is a way to mount USB storage without rebooting...
Go to settings > storage > and then look for your device and select mount.
I have found that only my larger USB sticks (32GB) tend to not automount when I insert them.
murgo said:
wait, so everytime i plug in my usb stick, i have to reboot the device?
Click to expand...
Click to collapse
NO, you should not have to reboot when you want to use a USB stick.
However with any computer-like object, if something isn't working correctly the first thing you should try is a reboot. Sometimes processes get tied up and stop working and a reboot will generally fix this.
FYI, USB sticks and USB external hard drives (I have a 500GB Seagate) work just fine through the Transformer's keyboard dock.
So I've been trying all night to transfer a handful of CBR files to my ATP through its USB connection. I'm doing this from my desktop which is running windows 7. (in case any or all of those details might help anyone)
At first, I was trying to transfer with the prime plugged into my keyboard dock with USB debugging enabled. Then I disabled USB debugging. Then I tried, with debugging disabled, when connecting to the tablet directly. Finally I tried connected directly to the tablet, but with USB debugging enabled.
At every step in the process I will get through one folder or so, and then get an error on my desktop that says the device has stopped responding or has disconnected, and the transfer will fail.
With a bit more trial and error it seems to be that any time I interact with the prime in any way while it is transferring (even something as simple as scrolling back and forth a little on the home screen to keep it from going to sleep) it fails.
I'm not rooted, I'm on the standard firmware (.21 - latest as of now), and I've tried restarting the prime.
I can not make these files transfer and it's driving me insane. Anyone have any suggestions or theories on how to fix this?
I was hoping that there would be a response, esplanation, or solution to your post.
I am experiencing the same thing when I try to transfer a Titanium Backup Folder back on to the Tablet, be it to the internal SD Card or the External SD Card.
I've also tried all the options you mention (Debugging ON/OFF, etc.)
Are we the only two people experiencing this?
George
File transfers
Hi,
I was having the same problems, then gave up and fully charged it,
the next day I adb'd the same blob file and it did it in 5 min, the
night before when it was about a quarter charged it was taking a half
hour and would fail. I had it in CWM recovery. So try fully charging it, I have
also had better luck on a xp machine, then my win7 machine.
I had the same problem on .21 not unlocked nor rooted.
I did full wipe data after upgrading to .21 then connected as MTP and copied files successfully. Hope this help.
Sent from my HTC Desire HD using xda premium
not to put you off trying to use usb, i had the same issue transferring 5GB from the prime to PC.
i found using Total Commander 1.0 rc5 for Android with the network addon i could transfer it faster via wireless (only due to the poor performance i had with usb)
so just share the content and drag it across the wifi.
Total commander *www*.*ghisler*.*com/android.htm
Plugins *ghisler*.*com*/androidplugins/
(remove the *, i cant post links yet )
one thing you could try if you haven't is plug it into one of the ports on the back of your computer instead of the front/top/side, sometimes these ports are under powered.
I have this error when i'm trying copy file more than 4Gb to sd card formatted FAT32
might be silly to ask but when you connect did you make sure your on media transfer not the camera one?
This might be the reason. I hate it when this happens when I'm transferring files and I cant change or play with the tablet till its done. Its becoming more of a singletask device. I'm starting to lose faith in Asus tbh.
http://forum.xda-developers.com/showthread.php?t=1461583
I've somehow been stuck with this issue for a short while.
I'm running Omega v34 JB 4.1.2 on my Galaxy S3 32GB. Tried both stock and Siyah 1.3 - 1.8 kernals.
Basically, hook my phone up to my computer in Media mode, transfer a file to the phone and the transfer will randomly time out. When it times out, the progress bar will just sit there and not progress at all, i'm constantly having to physically connect/re-connect my phone. This issue has existed since v33 of JB when the test firmware was leaked. I tried flashing back to v31/32 and doing full wipes but the issue still exists. The issue can occur within 10 seconds of transferring the file(s).
This happens when transferring to internal or external storage on the phone
Happens on any computer. Also tried different cables/USB ports/etc
Tried googling and searching this form but it almost appears I may be the only one with this issue...
To get around it i've tried using UMS to mount the ext storage as a USB Mass Storage device.. this works fine. Transferred files in one 30 minute continuous session, everything copied, nothing stopped or timed out.
But either in MTS or Camera mode, transferring data will eventually grind to a halt and I have to keep disconnecting/reconnecting in order to get it to work. It's a pain if I have to transfer multiple files.
Any ideas?
Also, has anyone else had the charging issue? Where the phone seems to charge as per normal via AC but ever since JB came in for the SGS3, the phone either takes an eternity to charge via a USB data port or it very slowly drains.
I can't even transfer data via USB on my device. Maybe try Wi-Fi file transfer or Wi-Fi droid.
I have Charing problem as well, but different. Phone randomly says it's charging when it isn't, and phone won't chare at all of powered off...
Sent from my SPH-L710 using xda app-developers app
russticles5 said:
I've somehow been stuck with this issue for a short while.
I'm running Omega v34 JB 4.1.2 on my Galaxy S3 32GB. Tried both stock and Siyah 1.3 - 1.8 kernals.
Basically, hook my phone up to my computer in Media mode, transfer a file to the phone and the transfer will randomly time out. When it times out, the progress bar will just sit there and not progress at all, i'm constantly having to physically connect/re-connect my phone. This issue has existed since v33 of JB when the test firmware was leaked. I tried flashing back to v31/32 and doing full wipes but the issue still exists. The issue can occur within 10 seconds of transferring the file(s).
This happens when transferring to internal or external storage on the phone
Happens on any computer. Also tried different cables/USB ports/etc
Tried googling and searching this form but it almost appears I may be the only one with this issue...
To get around it i've tried using UMS to mount the ext storage as a USB Mass Storage device.. this works fine. Transferred files in one 30 minute continuous session, everything copied, nothing stopped or timed out.
But either in MTS or Camera mode, transferring data will eventually grind to a halt and I have to keep disconnecting/reconnecting in order to get it to work. It's a pain if I have to transfer multiple files.
Any ideas?
Also, has anyone else had the charging issue? Where the phone seems to charge as per normal via AC but ever since JB came in for the SGS3, the phone either takes an eternity to charge via a USB data port or it very slowly drains.
Click to expand...
Click to collapse
I have the same issue with media transfer, It's like someone pulls out the usb cable from either end!
I've given up trying to find a solution to this. I now just use FTP with ES File Manager and filezilla on the laptop. works like a charm
On two different Windows 10 computers at home, I've had a bit of struggle trying to access the storage on my Z5C (running Nougat .376 UK firmware). I was trying to copy over some new music to the 200GB Sandisk microSD card, but Windows would continually hang and eventually give up even on just browsing folders. I could unplug the phone and try again but with no success. I popped out the microSD card and put it in an adapter and there wasn't any issue copying files over.
Anyone else ever notice Windows having difficulties accessing files on the phone? For what it's worth, I've almost always done firmware updates via Xperia Companion over USB without any problems, so it seems to be specifically related to file transfer/browsing.
doclloyd said:
On two different Windows 10 computers at home, I've had a bit of struggle trying to access the storage on my Z5C (running Nougat .376 UK firmware). I was trying to copy over some new music to the 200GB Sandisk microSD card, but Windows would continually hang and eventually give up even on just browsing folders. I could unplug the phone and try again but with no success. I popped out the microSD card and put it in an adapter and there wasn't any issue copying files over.
Anyone else ever notice Windows having difficulties accessing files on the phone? For what it's worth, I've almost always done firmware updates via Xperia Companion over USB without any problems, so it seems to be specifically related to file transfer/browsing.
Click to expand...
Click to collapse
make sure the screen doesn't turn off, enable developer options and check do not turn off display on charge
(i feel like MTP gets capped out at 20MB/s or something....from external SD --> internal bus rate??) for really really big transfers 8GB+, I usually remove my SD and use the SD reader, it should be OK if you have a good USB reader that can read the full speed of your card.
Sounds like a new USB cord is needed.
NeoBeum this is not really required to transfer files
*make sure the screen doesn't turn off, enable developer options and check do not turn off display on charge*
genuine?
try sd insight from play store see if ur sdcard is genuine
To all:
Is there a reason why not allowing the screen to sleep would help with file transfer speed back to a PC?
I've tried a couple different USB cables with similar results.
Card is genuine and as mentioned it transfers at full speed when using a SD card adapter and plugging in directly to the PC.
Tingles said:
Sounds like a new USB cord is needed.
NeoBeum this is not really required to transfer files
*make sure the screen doesn't turn off, enable developer options and check do not turn off display on charge*
Click to expand...
Click to collapse
& @doclloyd
not really, no (don't really need to enable always on screen), but if some users have problems, i just recommend to do that so they can walk away from the tx, and come back without the screen turning off
the z5c has a tendency to temporarily turn off MTP when the display sleeps, you'll be able to tell, because the files on the PC - will contain 0 data, but still appear in the destination
at the moment i'm looking at MTP Host and the other USB services on the phone to see if it will behave better with battery optimisation disabled
edit: if the phone locks @ sleep, it will disable MTP, I have never successfully transferred while my phone locks itself, smartlock can be another workaround for this, unlock with PC
NeoBeum said:
& @doclloyd
not really, no (don't really need to enable always on screen), but if some users have problems, i just recommend to do that so they can walk away from the tx, and come back without the screen turning off
the z5c has a tendency to temporarily turn off MTP when the display sleeps, you'll be able to tell, because the files on the PC - will contain 0 data, but still appear in the destination
at the moment i'm looking at MTP Host and the other USB services on the phone to see if it will behave better with battery optimisation disabled
edit: if the phone locks @ sleep, it will disable MTP, I have never successfully transferred while my phone locks itself, smartlock can be another workaround for this, unlock with PC
Click to expand...
Click to collapse
Thanks for the reply. I'll give it a try next time I need to copy files over to the phone (usually new music) and see what happens.