Hello, I took my cellphone to unlock network but when the people of the place gave my cellphone I found that it did not recognize SIM. I changed its rom into stock and cyanogenmod, I restored it but nothing seemed to work. Please help me or give me any advice.
Related
hi guys i have a problem with my vibrant t mobile..my brother brought it from u.s. i tried to unlock it but the internal imei was found 004xxxxxx but the imei found at battery back is different the original one.my version is ji6 so i thought helroz method could be effective and i tried that after trying it my phone network lock went off but wen i insert sim and attempt to call it says not registered on network plz help thanks...
I got the same problem, I am in trying to use my Unlocked phone in India... but have no clue whats wrong! any help regarding this issue will be greatly appreciated!
hey i found the solution is ur version ji6??
Yes! Mine is ji6
please i am having the same problem also same ji6 what was the fix???
i tried every possible way for that nothing worked for me but later i tried vodafone (INDIA) which appears to have same code that of t mobile
hi
Please send me the soln.
@[email protected]
did anyone resolve this issue? I just got the same problem.
I cannot seem to pick up vodafone network.
Hey,
I've got a problem with my Galaxy S II and I hope some of you can help me. One day i flashed a wrong modem via CWM and I couldn't connect to the internet. So I decided to go back to stock and restore everything via CWM. I flashed a 3 part stock firmware and updated it to ICS. Then I flashed CWM and restored everything, but from now on my phone ask me several times a day for my SIM-PIN. I tried different roms, but on every rom my phone ask me for the PIN, again and again. Now I'm on ICS stock and everything works fine. Can anybody help me or is there anybody with the same issue?
Best regards
Hesoy
SIM pin is your SIM card pin code. Whenever you get a SIM card it comes with 2 codes: SIM PIN Code & SIM PUK Code.
Check the carrier SIM package and should get them both.
If you threw it all away contact you carrier and ask for the PUK Code.
from sii xda-ded
Hey,
thanks for your answer. I know my SIM code and it works, but the problem is the SIM PIN request. When i start my phone I enter my code, but the phone ask me again and again for my pin, when it is on the table or in my pocket for example. Without a restart or something like that.
Sorry for my bad english.
Best regards
Hesoy
go to sim kit and set it to "don't ask for pin".
from sii xda-ded
Try flashing your modem again from here, they include the RILS and could help. Although it would help it you gave more info about your ROM.
http://forum.xda-developers.com/showthread.php?t=1881304
[REF] Modem+RIL CWM Installers
Sent from my GT-I9100 using Tapatalk 2
Hi, and firstly, thanks to any and all who offer their knowledge to assist my conundrum.
I recently purchased a Bell Canada version of the SG Note 2 (i317), I am on Telus so I attempted to Unlock the phone. I looked online and found people were having success unlocking these phones for free using the *#197327640# method, (whereby you go into the service mode, turn off the PERSHO_256 and then INITIALLIZ).
I tried this method and the phone then seemed to work with my telus sim, but only for voice, not data. When I put in a Bell SIM from a friend, both voice and data worked fine - which tells me its not a hardware (radio) issue. I also tried using another friends Telus SIM and had the same results as mine - which tells me it's not a SIM error. Also, all the settings in the mobile network area appeared to be correctly set up.
So, my next step was to try and reflash the phone to the stock Bell ROM and then just buy an Unlock code. I downloaded the stock ROM (2 different ones actually) and used Odin 3.07 to reload the ROM. I've tried it several times now, with both Bell ROMs and each time it says it's been successful, but the phone remains in the same, partially unlocked state.
It seems as though by using the PERSHO_256 method I have permanently, PARTIALLY unlocked the phone. I can't seem to re-lock it by installing the stock Bell ROM, and since it's unlocked, I can't get the foreign SIM error to come up to enable me to put in my purchased unlock code.
If anyone has any insights, it would be GREATLY appreciated. Thanks!
-Luke
You should ask questions about a specific device in its own Q&A. (unless it doesn't have one). Cuz people there have the same phone and will know exactly what to do.
LIFE! IT'S WHAT YOU MAKE OUT OF IT!
Will do, thanks for the tip!
Hello Good Technical Supporters and helpers .
I rooted my Samsung Galaxy S2 GT I9100 and Upgraded it to Slim bean Android 4.3.1 . But Upon restarting my phone, it requires me to out a SIM network unlock PIN, I will tried 0000,12345, which are some universal codes but to no avail , Im stocked and dont know what to do , My phone only gives me the option to Unlock or dismiss , i thought It was my SIM error so I out my SIM in another phone ad it required no password at all. I then realized i was the phone. Can someone help me out please,
I even install Galax SIM unlock but still it say my ROM is not rooted , SO please is there anything I can go to unlock this phone. I even tried rooting again but still the same issue. Please Please Please Help.
Service centre.
So my mother-in-law has a Straight Talk SGH-959G. She needed to get it SIM unlocked, so she took it to a phone repair shop where it stayed for about a month. He successfully unlocked it, but the wifi didn't work, so he said he would fix it that day. When she got it back it still didn't work, so she gave it to me to fix. It looks like he installed an at&t rom, because it shows the logo when it boots up. However, the first thing that shows up when the phone turns on is that it is an i9100.
I figured the wifi would work with a different rom, so I installed this one (5.0.2 CyanideL for i777) and it works amazing. But every time it turns on, it asks for the SIM unlock code and doesn't recognize the SIM card. I tried a few different apps to get the unlock code, but none have worked.
Any ideas? Do I need to get it from another source, and if so, does anyone know someone that sells unlock codes for straighttalk phones?
Thanks!
thx4theammo said:
So my mother-in-law has a Straight Talk SGH-959G. She needed to get it SIM unlocked, so she took it to a phone repair shop where it stayed for about a month. He successfully unlocked it, but the wifi didn't work, so he said he would fix it that day. When she got it back it still didn't work, so she gave it to me to fix. It looks like he installed an at&t rom, because it shows the logo when it boots up. However, the first thing that shows up when the phone turns on is that it is an i9100.
I figured the wifi would work with a different rom, so I installed this one (5.0.2 CyanideL for i777) and it works amazing. But every time it turns on, it asks for the SIM unlock code and doesn't recognize the SIM card. I tried a few different apps to get the unlock code, but none have worked.
Any ideas? Do I need to get it from another source, and if so, does anyone know someone that sells unlock codes for straighttalk phones?
Thanks!
Click to expand...
Click to collapse
If you didn't know, the rom is fairly new so bug like this could happen. Secondly, the rom is for i777 only, you have SGH-959G which they are not exactly the same. '
Try using this rom instead (if liquidsmooth has problems): http://forum.xda-developers.com/galaxy-s2-att/development/rom-carbonrom-sgh-i777-sgh-959g-t2845008
or this one (use this one first): http://forum.xda-developers.com/gal.../rom-liquidsmooth-v3-2-sgh-i777-959g-t2865888
Sorry for taking so long...
Neither of those worked. They both optimized the apps and then rebooted to an infinite boot animation.