Something impossible to do ! - Samsung Galaxy 5 I5500

I do not know how to solve this big problem..
* - no cwm
* - access only download mode and recovery
* - several computers in the house I did not recognize the usb cable ( usb device not recognized )
possible solution
*- instal cwm from recovery ( I do not have the option to choose a file on the card,only update zip file ),so you probably have to rename that CWM on ''update'' file.
* - maybe deodexed rom can be installed form recovey !
Thanks in advance for your help.

Problem solved thanks anyway.

Related

Help please! Tablet S problem / bricked ?

Hello. I have a sony tablet s wifi only, which had rooted ICS, installed with condi's AIO.
Today it got stucked on boot screen, so after many tries of soft reset I went to recovery mode(which btw is rev.29 <3e>) and wiped all data.
Now, I'm trying to install a new software using AIO and Flasher but the app gets stucked on this message:
Code:
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Please! Can someone help me?
bycxc said:
Hello. I have a sony tablet s wifi only, which had rooted ICS, installed with condi's AIO.
Today it got stucked on boot screen, so after many tries of soft reset I went to recovery mode(which btw is rev.29 <3e>) and wiped all data.
Now, I'm trying to install a new software using AIO and Flasher but the app gets stucked on this message:
Code:
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Please! Can someone help me?
Click to expand...
Click to collapse
1. recovery.
2. make sure that you have correct adb driver installed.
3. download prerooted doubleFLASH fw from my signature.
4. flash via AiO - flash custom [straight from recovery] option.
br
condi
message
condi said:
1. recovery.
2. make sure that you have correct adb driver installed.
3. download prerooted doubleFLASH fw from my signature.
4. flash via AiO - flash custom [straight from recovery] option.
br
condi
Click to expand...
Click to collapse
Thank you, condi, for your answer.
1.Recovery - can reach it - rev.29 <3e> with some errors becuase of the system and data wipe.(errors like: "E:Fail to read boot logo flag" , "E::Can't open /dev/block/mmcblk0p5(No such file or directory)" , "E:Can't mount /cache/recovery/command" , "E:Fail to mount /sdcard(No such file or directory)" );
2.adb is installed using "Sony Tablet ADB Driver Automated Installer", Composite Adb Interface in recovery and looks fine;
3.
4.Well , here is the real problem. AiO is displaying this
Code:
[*] Enter recovery (power + vol-up) and run _hack_recovery.zip
Wait for assert error..
The problem is that as you can see from "1) Recovery errors", my memory card can't be mounted so I can't use that _hack_recovery.zip from recovery. Also I don't have that hack_recovery file.
Here is a screenshot with the recovery screen, dropbox link: /u/43085866/20130223_140402.jpg

UNBRICK,ROOT,INSTALL A CUSTOM ROM for Alcatel OT 991X

How to Unbrick , root and install a custom ROM on Alcatel One Touch OT-991 The easiest way !
First of all ,before you continue note that :
i) Your device will be rooted.
ii) You will install a Custom ROM *Optional
iii) SIM LOCK REMOVAL
iv) This will void your warranty
Step 1 / U'll need to format your phone's Firmware by using SP_Flash_Tool_V2.1134.00
i) Open SP Flash Tool
ii) Load the Scatter
iii) Click on FORMAT
HINT : Format all ( The whole Flash ) NOT the " Format whole flash except Bootloader and Bin Region "
iv) If the device was seccessfully formated , at the end there'll be a green circle...
Step 2 / Now you have an Empty phone with no firmware... Now you will need to flash some Files...
i) Flash PRELOADER ...
ii) Remove Battery and USB Cable ...
iii) Flash DSP_BL ...
iv) Remove Battery and USB Cable ...
v) Flash PRO_INFO ...
vi) Remove Battery And USB Cable ...
vii) Flash LOGO & NVRAM & UBOOT one by one ...
viii) Remove Battery And USB Cable ...
Step 3 / Install CWM Recovery
i) U'll need to flash BOOT.img and RECOVERY.img ONE BY ONE
ii) Load scatter
iii) Flash BOOT.img
iv) Remove Battery and USB Cable ...
v) Flash RECOVERY.img
vi) Remove Battery and USB Cable ...
HINT : IF you got errors on doing these, then I'm sorry but your device has gone :'(
But if you did not get any ERRORS while doing these steps then CWM was successfully installed
on the device.. to confirm it just BOOT your phone in recovery mode and if it is installed you'll see
the CWM window
Step 4 / You had now Installed CWM Recovery that will help you installing your custom ROM
i) Download VeSa ROM ( By Jeffta ) or you may download any other ROM
ii) Once downloaded, Copy the Custom Rom on your SD Card and Boot your phone in recovery mode by pressing HOME + VOLUME UP + POWER KEY
iii) Then Apply Update on SD Card ...
Hope this help you guys
This is a method to unbrick your phone, ROOT it and install a custom rom as your choice
If you meet with problems please contact me on Facebook : on.fb.me/ReDhZq because I Rarely login to this site
Warning : I'M NOT THE OWNER OF THE BELOW FILES
Files : bit.ly/1jhqA3E
CHEERS ... HOPE IT HELPS AND IF U GUYS NEED HELP MESSAGE ME ON FACEBOOK
Dont forget the thanks button !
YudIsh123 said:
How to Unbrick , root and install a custom ROM on Alcatel One Touch OT-991 The easiest way !
First of all ,before you continue note that :
i) Your device will be rooted.
ii) You will install a Custom ROM *Optional
iii) SIM LOCK REMOVAL
iv) This will void your warranty
Step 1 / U'll need to format your phone's Firmware by using SP_Flash_Tool_V2.1134.00
i) Open SP Flash Tool
ii) Load the Scatter
iii) Click on FORMAT
HINT : Format all ( The whole Flash ) NOT the " Format whole flash except Bootloader and Bin Region "
iv) If the device was seccessfully formated , at the end there'll be a green circle... If the phone was not formatted then go kill yourself ...
Step 2 / Now you have an Empty phone with no firmware... Now you will need to flash some Files...
i) Flash PRELOADER ...
ii) Remove Battery and USB Cable ...
iii) Flash DSP_BL ...
iv) Remove Battery and USB Cable ...
v) Flash PRO_INFO ...
vi) Remove Battery And USB Cable ...
Step 3 / Install CWM Recovery
i) U'll need to flash BOOT.img and RECOVERY.img ONE BY ONE
ii) Load scatter
iii) Flash BOOT.img
iv) Remove Battery and USB Cable ...
v) Flash RECOVERY.img
vi) Remove Battery and USB Cable ...
HINT : IF you got errors on doing these, then I'm sorry but your device has gone :'(
But if you did not get any ERRORS while doing these steps then CWM was successfully installed
on the device.. to confirm it just BOOT your phone in recovery mode and if it is installed you'll see
the CWM window
Step 4 / You had now Installed CWM Recovery that will help you installing your custom ROM
i) Download VeSa ROM ( By Jeffta ) or you may download any other ROM
ii) Once downloaded, Copy the Custom Rom on your SD Card and Boot your phone in recovery mode by pressing HOME + VOLUME UP + POWER KEY
iii) Then Apply Update on SD Card ...
Hope this help you guys
This is a method to unbrick your phone, ROOT it and install a custom rom as your choice
If you meet with problems please contact me on Facebook : on.fb.me/ReDhZq because I Rarely login to this site
Warning : I'M NOT THE OWNER OF THE BELOW FILES
SP_Flash_Tool & Preloader & DSP_BL & PRO_INFO bit.ly/1f1ZHt9 Username : XDA Password : XDA
BOOT.img & RECOVERY.img ( CWM RECOVERY ) bit.ly/18aWFkk
VeSa ROM ( By JEFFTA ) Jellybean bit.ly/1cvYEF5
VeSa ROM ( By JEFFTA ) Jellybean ScreenShoot bit.ly/13NJSRt
CHEERS ... HOPE IT HELPS AND IF U GUYS NEED HELP MESSAGE ME ON FACEBOOK
Dont forget the thanks button !
Click to expand...
Click to collapse
Sorry,,, the first link is dead.. anyone could just uploada fresh copy of first file??
HackT3k said:
Sorry,,, the first link is dead.. anyone could just uploada fresh copy of first file??
Click to expand...
Click to collapse
Link is OK. I was able to download those files.

[Recovery] [SM-A700FD] [BUILD 2] [QCOM] [5.0.2] TWRP for Galaxy A7

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE GALAXY A7 [SM-A700FD] [QCOM] RUNNING LOLLIPOP
THIS RECOVERY HAS BEEN TESTED AND EVERYTHING SEEMS TO BE WORKING FINE .. CHECK THE BUGS SECTIONS
Why twrp ? Why not a pre-rooted firmware which will not void warranty?
Ans : TWRP has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !
All you have to do is follow my instructions :
STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !
STEP 2 :
-Download the recovery from --->
TWRP
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Galaxy A7logo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it
MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON
-Click Start
ONCE IT SAYS PASS ... BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card or external sd
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
BUGS
You tell me!
YOU TELL ME
NOTE : IF ANY OPTION DOESNT WORK FOR U ... TURN OFF UR PHONE AND THEN BOOT INTO RECOVERY
SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)
CREDITS
TWRP TEAM
@govind.madhu93 for testing
CHANGELOG :-
BUILD 2
Fixed Recovery reboot loop
BUILD 1
Initial Build
Thanks a lot!!
Can i try this method for A700FQ if i can flash twrp i can root my A7
I had installed a kitkat twrp on my a700fd that was developed for a700h and it worked.
Sent from my SM-A700FD using XDA Free mobile app
help
system force close after flashing recovery. only status bar is visible
PS: everything working fine now. cleared cache and restarted it. thanks a lot. backup restore also working
Hey are you also thinking to develop any custom rom for galaxy a7 ?
if you start i am ready to help.
govind.madhu93 said:
I had installed a kitkat twrp on my a700fd that was developed for a700h and it worked.
Sent from my SM-A700FD using XDA Free mobile app
Click to expand...
Click to collapse
It work with A700H kitkat my friend?
is this working on russian lollipop version of A700FD?
palimatix said:
is this working on russian lollipop version of A700FD?
Click to expand...
Click to collapse
yes
Hello
How about the SM-A700F would it work on that device too?
Great job. Now we just need an AOSP ROM.
I noticed that backups made with this TWRP have wrong date in their names (half a year earlier).
New build is up !!
Changelog
Fix Recovery reboot loop
Download - http://dl.rutvikrajagopal.com/a7lte/twrp
Will we see any development for the A700F [Exynos] ?
Hello! I've installed the second version of TWRP - all works, but backup folder name has invalid date - today it made backup with folder name 2015-03-25..
jazzzzy said:
Hello! I've installed the second version of TWRP - all works, but backup folder name has invalid date - today it made backup with folder name 2015-03-25..
Click to expand...
Click to collapse
I'll look into the issue soon
RVR said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE GALAXY A7 [SM-A700FD] [QCOM] RUNNING LOLLIPOP
THIS RECOVERY HAS BEEN TESTED AND EVERYTHING SEEMS TO BE WORKING FINE .. CHECK THE BUGS SECTIONS
Why twrp ? Why not a pre-rooted firmware which will not void warranty?
Ans : TWRP has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !
All you have to do is follow my instructions :
STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !
STEP 2 :
-Download the recovery from --->
TWRP
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Galaxy A7logo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it
MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON
-Click Start
ONCE IT SAYS PASS ... BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card or external sd
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
BUGS
You tell me!
YOU TELL ME
NOTE : IF ANY OPTION DOESNT WORK FOR U ... TURN OFF UR PHONE AND THEN BOOT INTO RECOVERY
SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)
CREDITS
TWRP TEAM
@govind.madhu93 for testing
Click to expand...
Click to collapse
hello, you can create a recovery for Galaxy A7 (SM-A700F Lollipop)? I looked everywhere but there:laugh::laugh:
nino64 said:
hello, you can create a recovery for Galaxy A7 (SM-A700F Lollipop)? I looked everywhere but there:laugh::laugh:
Click to expand...
Click to collapse
I would like that too if possible, our Sm-A700f dosnt get much love :crying:
After installed the build 2 I am still having reboot loop.

Ulefone Be Touch 3

Hello,
I have the Ulefone Be touch 3 and i want to really increase the sensitivity of the screen.
Because when i write a text message, it did not write the half of the words.
I tried the app Screen Booster but it did not work.
I see in the net that i have to root to add specifications on a file Build.prop.
But for that, i have to root.
Someone have an idea ?
I tried the root method :
-Extract RAR
-Put UPDATE-SuperSu to your phones storage
-Install drivers to PC
-Open SP Flash Tool
-Check boot and recovery and select files from files-folder (Uncheck others if they are checked)
-Push download button
-Remove battery from the phone and connect USB
-Disconnect USB when SP Flash Tool says OK
-Install battery and start phone with vol up + power
-Select install zip from sdcard and select super su
-Reboot phone and you are done
-Click thanks if you are satisfied
But I have an error :
PMT changed for the rom
I am afraid to change the download only by firmware upgrade ...
Thanks in advance for your help
Avy
Very first LK.BIN for ulefone Be Touch 3 needed
Hi,
I flashed my Ulefone Be Touch 3 device with Ulefone's ROM and ... big mistake : soft bricked.
The device still works except the screen : a dark blue one with no logo, no icon, etc.
From what I read, I can get screen back to normal with the very first lk.bin file but i can only find recent (and thus faulty) ROMs.
Could someone help me ?
Thanks in advance.
Best regards.

No recovery and fastboost access on Nubia z7 mini

Hello everyone.
*
I installed the 3.01 ROM without going through tools and official ROM. So I have a partitions problem and data network.
I will reinstall an older ROMi have dont access to Recovery 2.8.6 (by either the keys or by applying or by ADB).
I can not either throwing fastboot command in bootloader mode ... My phone seems yet to be recognized by the device manager. Drivers is ok.
impossible blow to flash a ROM or a recovery!
*
*
*
Someone should do a track for me going ??
Tku

Categories

Resources