Related
Hello everybody, after the installation of the ROM tw008 and custom kernel 3.60 photos does not register and video does not work , somebody would have a solution?
I test all the goro's kernel and its always the same problem . Please help me!!
vinss68 said:
I test all the goro's kernel and its always the same problem . Please help me!!
Click to expand...
Click to collapse
I really want to help but unfortunately i don't know what to help you on:
But:
1: Did you install the ROM/kernel properly?
2: Did you try re-installing?
3: Did you try flashing stock firmware than Wolfbreak's ROM.
4. Did it work on stock kernel?
5. DID YOU MAKE SURE YOU DOWNLOADED THE RIGHT 3.60 KERNEL BECAUSE GORO PUT THE WRONG LINK? (oops caps)
Download the goro kernel again and flash it HERE
Hope this helps
Hello thank you for your reponse, indeed I tried some thing, and with the good kernel .
I have try:
- to make a fresh instalation of bb.67 and of the ROM tw008, then of the custom kernel 360 (by trying all the camera resolution, and play on frequence cpu, anything has to make its not working). I have not try to make a fresh installation of firmware via SEUS (I try it now!!)
-Camera is completely functional with the stock kernel , with z's custom kernel (22,23,05) and with custom kernel 3.47 when i was on tw7 bb52, but I prefere the ck 360 for the underclock and bb.67
- with and without the theme which I use
And camera make always her tantrums
Well I try the fraiche installation firmware and I informed
Works fine for me and everyone else using it...
Must be something you're doing
Just for information if it can help to resolve the problem, when I takes a photo the image gallery makes an black screen and when I want to pass in video mode the application makes a sudden closure
always similar after a full fresh installation of all.... i don't know what's the problem. i think i will wait a future kernel with underclocking and stay with z's kernel for the moment ,but if anyone got a idea or question about situation ...
vinss68 said:
always similar after a full fresh installation of all.... i don't know what's the problem. i think i will wait a future kernel with underclocking and stay with z's kernel for the moment ,but if anyone got a idea or question about situation ...
Click to expand...
Click to collapse
you might be flashing the wrong version of the kernel for your rom....
it's strange because all working fine, just this problem with camera . i trying to reorganize my sd card she's in a mess... maybe it's the cause of my problem.
some opinion?
I don't think its related to the rom or custom kernel. I've had this problem on some of the custom roms I've tried. What ultimately fixed it for me is by formatting the sd card so make a backup of your entire sd card then format it.
Sent from my X10x using XDA App
Good news,
my problem is resolved. Yesterday evening I completely cleaned my card sd then I left the telephone have it reconfiguré. I remake fresh installation rom tw008 and of the custom kernel 360 and hop all work fine. I think that the problem came because I tested several applications camera,background which created several files for photos,images, because which never clean .i am finally going to be able to take advantage of quite its hey hey.
Thx all to be interested in you has my case and sorry for my bad english
Hey,
I have a big problem:
I have brought the Galaxy S3 i9300 one week ago. I really don't like the stock rom so I rooted and flashed cm10.1. I really like stock vanilla Android. Everything works really smooth and stable. But when I try to launch the camera is appears this error: Camera error and under this: Can't connect to the camera. (Look at Attachments) I really need a camera and this is just
First I was thinking it was Cm but then I flashed other Roms (Supernexus, Paranoid, ...) and everytime the same. Only in Xperian Ze and Omega Rom the camera works but on those roms its the stock camera. I also tried to install a third party cam.app.
So now I don't know what to do. Is this only on my S3 or is it on someone elses.
And is there any way so flash the stock camera app or to fix this bug.
This is a well known problem.
I would recommend you start here first:
http://forum.xda-developers.com/showthread.php?t=2006128
Some users had improvements after aligning Cam FW Ver and Phone FW Ver.
degiovab said:
This is a well known problem.
I would recommend you start here first:
http://forum.xda-developers.com/showthread.php?t=2006128
Some users had improvements after aligning Cam FW Ver and Phone FW Ver.
Click to expand...
Click to collapse
Hey, thanks. Did I have to do *#34971539# in Stock or in CM.
Damdidosch said:
Hey, thanks. Did I have to do *#34971539# in Stock or in CM.
Click to expand...
Click to collapse
You have to enter the code in a Samsung stock rom. It does not work in CM.
P.S. Hit the "Thanks" button if I was of any help...
degiovab said:
You have to enter the code in a Samsung stock rom. It does not work in CM.
P.S. Hit the "Thanks" button if I was of any help...
Click to expand...
Click to collapse
Ok when I do that I have FM version that aren't supported in the post. What now?
Damdidosch said:
Ok when I do that I have FM version that aren't supported in the post. What now?
Click to expand...
Click to collapse
That's very odd.
The post contains pretty much all known camera firmwares for SGS3!
If I was you I would try and google "i9300 camera firmware XXYYNN" with the code you have and see if anybody else got the same.
degiovab said:
That's very odd.
The post contains pretty much all known camera firmwares for SGS3!
If I was you I would try and google "i9300 camera firmware XXYYNN" with the code you have and see if anybody else got the same.
Click to expand...
Click to collapse
Found and Done but camera still doesn't work -,-
Damdidosch said:
Found and Done but camera still doesn't work -,-
Click to expand...
Click to collapse
If it is of any consolation, I get also random FCs and I have aligned my firmware (ZDFI02)
degiovab said:
If it is of any consolation, I get also random FCs and I have aligned my firmware (ZDFI02)
Click to expand...
Click to collapse
Now the stock camera doesn't work too.
Is it possible to get the stock back?
flash the camera firmware that you had previously
Glebun said:
flash the camera firmware that you had previously
Click to expand...
Click to collapse
But I can't find it.
I flashed a different.
In Attachments is my default. But this I can't find in the whole internet.
I'm so stupid
i have the same problem here please help me
Hi there,
i have the same problem like you guys, my camera doesn't work even if my phone is rooted or not, even if it's running with and original firmware or with a rom. i tried all your methods, but still nothing. now i'm running Sotmax Ultimate Stock V20 B4 XXUFME3 ROM, android 4.2.2 and i can't figure it out. what rom should i install? AOKP, AOSP?
Thanks!
QUOTE=omar5885soman;41338928]i have the same problem here please help me[/QUOTE]
i9300 camera is a nightmare
I've run various custom roms on my original Galaxy S, an SII and now an SIII and I have never had as much frustration with any of them as I have had with the S3 camera. Like the original poster, I prefer AOSP over Samsung firmware. Even if you replace touchwiz with a different launcher it seems clunkier and less responsive than a pure Google rom. AOKP is my favourite, it's just got all my favourite features. But I've come to the conclusion that Samsung know best how to drive Samsung firmware. As much as I love AOKP when they declare a rom version "stable" or a "milestone" this is the status of the rom before it is grafted onto specific devices, which means hardware and driver issues can still arise.
All of which means if you want all your hardware to work go for a rom built on Samsung firmware. Omega rom is pretty good, but not perfect. It always starts out good for me and then gets laggy. And then I want to try AOKP again. And I do. And the camera is still crud... and so the infinite loop begins again.
use camera jb+
Camera failed
camera not working
error : camera failed
thnaks all :good:
I got this problem since flash fluorescent rom, i think it's not because the rom and the kernel since i have flashed many roms and kernels.
so, my problem is my battery indicator get stucked at 100%, and suddenly 0% and my phone turn off. if i charge, it shows 100%.
i have flashed stock rom, clear battery status via cwm and the problem still there.
how to fix it? i frustrated
coconut.
thanks
TeranG__ said:
I got this problem since flash fluorescent rom, i think it's not because the rom and the kernel since i have flashed many roms and kernels.
so, my problem is my battery indicator get stucked at 100%, and suddenly 0% and my phone turn off. if i charge, it shows 100%.
i have flashed stock rom, clear battery status via cwm and the problem still there.
how to fix it? i frustrated
coconut.
thanks
Click to expand...
Click to collapse
same here
that's was happento me yesterday whan i back to zelly rom 4 from pac rom
flashed stock rom, clear battery status via cwm change kernel too kappa1.6 and kappa 1.4 and the problem still there
anyone can help us
TeranG__ said:
I got this problem since flash fluorescent rom, i think it's not because the rom and the kernel since i have flashed many roms and kernels.
so, my problem is my battery indicator get stucked at 100%, and suddenly 0% and my phone turn off. if i charge, it shows 100%.
i have flashed stock rom, clear battery status via cwm and the problem still there.
how to fix it? i frustrated
coconut.
thanks
Click to expand...
Click to collapse
abu gaber said:
same here
that's was happento me yesterday whan i back to zelly rom 4 from pac rom
flashed stock rom, clear battery status via cwm change kernel too kappa1.6 and kappa 1.4 and the problem still there
anyone can help us
Click to expand...
Click to collapse
hope your problem resolved.
did you check stat_sys_battery on framework-res.apk\res\drawable-mdpi ?
maybe it have something wrong
hurriX8 said:
hope your problem resolved.
did you check stat_sys_battery on framework-res.apk\res\drawable-mdpi ?
maybe it have something wrong
Click to expand...
Click to collapse
The problem was solved
Thank you for your try to help
and sorry for my bad english
---------- Post added at 02:05 AM ---------- Previous post was at 01:51 AM ----------
TeranG__ said:
I got this problem since flash fluorescent rom, i think it's not because the rom and the kernel since i have flashed many roms and kernels.
so, my problem is my battery indicator get stucked at 100%, and suddenly 0% and my phone turn off. if i charge, it shows 100%.
i have flashed stock rom, clear battery status via cwm and the problem still there.
how to fix it? i frustrated
coconut.
thanks
Click to expand...
Click to collapse
ok man ,
The problem was solved
i flashed pac rom 24-7-2013
and my battery 85 % now . and i'm going to flash zellycream rom again
you can try to flash pac rom or LegacyXperia and see what is going on
sorry for my bad english
...
this problem seems kernel related.. simply use other kernel than kappa for this and other stock roms if u getting int this problem...
abu gaber said:
ok man ,
The problem was solved
i flashed pac rom 24-7-2013
and my battery 85 % now . and i'm going to flash zellycream rom again
you can try to flash pac rom or LegacyXperia and see what is going on
sorry for my bad english
Click to expand...
Click to collapse
it works!! thanks. i flashed newest legacy experia and the problem gone
bejunk said:
this problem seems kernel related.. simply use other kernel than kappa for this and other stock roms if u getting int this problem...
Click to expand...
Click to collapse
I also faced this problem after flashing nAl's kernel on my coconut but if i flash stock kernel, it shows 100% but if i use any other kernel, then yhe battery indicator is working fine. seems i can't go back to stock kernel. Tried SEUS flashing but dosen't worked for me, please suggest me what should i do to get my battery icon working on stock ROM and kernel
shivamcheat said:
I also faced this problem after flashing nAl's kernel on my coconut but if i flash stock kernel, it shows 100% but if i use any other kernel, then yhe battery indicator is working fine. seems i can't go back to stock kernel. Tried SEUS flashing but dosen't worked for me, please suggest me what should i do to get my battery icon working on stock ROM and kernel
Click to expand...
Click to collapse
hmm this is really strange man :silly:
did u wipe batery stats (after flashin stock kernel) or may try a tool like battery calibrator from market (sry for question if u already do it..)
also how u flashed back using seus?? did u reflashed rom + kernel in repair mode??? --> i allways recommend this guide/flashtool method http://talk.sonymobile.com/thread/35239?tstart=0 if u have to get on stock rom + kernel.... just follow it but may u wipe battery stats bfore u do this (on custom kernl) then power off (dont boot) now if stock kernel is flashed it will make a new batterystats.bin...
hope u getting it to work
peace
bejunk said:
hmm this is really strange man :silly:
did u wipe batery stats (after flashin stock kernel) or may try a tool like battery calibrator from market (sry for question if u already do it..)
also how u flashed back using seus?? did u reflashed rom + kernel in repair mode??? --> i allways recommend this guide/flashtool method http://talk.sonymobile.com/thread/35239?tstart=0 if u have to get on stock rom + kernel.... just follow it but may u wipe battery stats bfore u do this (on custom kernl) then power off (dont boot) now if stock kernel is flashed it will make a new batterystats.bin...
hope u getting it to work
peace
Click to expand...
Click to collapse
Thanks for reply but I used flashtool too and followed what you said earlier wiped battery stats using custom kernel's recovery then flashed stock FTF using flashtool but then also it shows 100 %.All custom kernels of jellybean and ics are working fine but not the stock kernel.
shivamcheat said:
Thanks for reply but I used flashtool too and followed what you said earlier wiped battery stats using custom kernel's recovery then flashed stock FTF using flashtool but then also it shows 100 %.All custom kernels of jellybean and ics are working fine but not the stock kernel.
Click to expand...
Click to collapse
Wiping battery stats and flashing stock kernel worked for me this time thanks bejunk
Check the link..it might help..
TeranG__ said:
I got this problem since flash fluorescent rom, i think it's not because the rom and the kernel since i have flashed many roms and kernels.
so, my problem is my battery indicator get stucked at 100%, and suddenly 0% and my phone turn off. if i charge, it shows 100%.
i have flashed stock rom, clear battery status via cwm and the problem still there.
how to fix it? i frustrated
coconut.
thanks
Click to expand...
Click to collapse
Check this post of mine even i had the same prob on kappa kernel and optimax ROM..
http://forum.xda-developers.com/showpost.php?p=44840177&postcount=1125
Hope i helped you..
Regards..
a|\|droid_user said:
Check this post of mine even i had the same prob on kappa kernel and optimax ROM..
http://forum.xda-developers.com/showpost.php?p=44840177&postcount=1125
Hope i helped you..
Regards..
Click to expand...
Click to collapse
hey bro i see ur very xperienced in kappa-related stuffs , so would like to ask a question :
can u tell me a soultion for removing/decreasing buttonbacklight?? i tried so mnay things i even cant remember i used apps, scripts, edited hwconfig as well as prehwconig etc etc.... NOTHING WORKED
for me ics is only usable with this kernel but thsi buttonbacklite is so annoying it blends me and nights its brighter than screen
but i want to use it!!!
so i would really appreciete if u can give me a solution, thx in advance.
Give me some time i will get back to you..
bejunk said:
hey bro i see ur very xperienced in kappa-related stuffs , so would like to ask a question :
can u tell me a soultion for removing/decreasing buttonbacklight?? i tried so mnay things i even cant remember i used apps, scripts, edited hwconfig as well as prehwconig etc etc.... NOTHING WORKED
for me ics is only usable with this kernel but thsi buttonbacklite is so annoying it blends me and nights its brighter than screen
but i want to use it!!!
so i would really appreciete if u can give me a solution, thx in advance.
Click to expand...
Click to collapse
Alright give me some time i will get back to you bro...
Do remember that i m not a proper developer..i will try my best
EDIT:Hold on i think i found something..see if this helps you..
http://forum.xda-developers.com/showpost.php?p=41120591&postcount=749
a|\|droid_user said:
Alright give me some time i will get back to you bro...
Do remember that i m not a proper developer..i will try my best
EDIT:Hold on i think i found something..see if this helps you..
http://forum.xda-developers.com/showpost.php?p=41120591&postcount=749
Click to expand...
Click to collapse
yes bro, dont be hurry take ur time at now using 4.2.2 anyway, only asked bcuz until now no working solution found even on kernel thread, nobody replied (bcuz then also dunno) but thank u very much that u looked into it :angel: if u found sth in future tell me pls, thank u!
but for now may disappoint u but link solution not workin' (tested) its same string as for method with initd script... but i know u wanted only help so i appreciete it
thanks anyway! peace
bejunk said:
yes bro, dont be hurry take ur time at now using 4.2.2 anyway, only asked bcuz until now no working solution found even on kernel thread, nobody replied (bcuz then also dunno) but thank u very much that u looked into it :angel: if u found sth in future tell me pls, thank u!
but for now may disappoint u but link solution not workin' (tested) its same string as for method with initd script... but i know u wanted only help so i appreciete it
thanks anyway! peace
Click to expand...
Click to collapse
Ok bro.. i will get back to you..
Regards..
Hi, just remove the battery 15s and replace it. for me that solve the problem...
Sony Ericsson X;eria Arc
hurriX8 said:
hope your problem resolved.
did you check stat_sys_battery on framework-res.apk\res\drawable-mdpi ?
maybe it have something wrong
Click to expand...
Click to collapse
Dear All,
I am also facing the same issue from yesterday, where my battery is stuck to 100% and not reducing its % level.
I have tried to repair the phone by PC companion, as suggested by Customer service of Sony Ericsson, However the problem is still not resolved.
I would appriciate if some one can please help me to resolve the issue.
Regards,
Vishal Bhatt
TeranG__ said:
I got this problem since flash fluorescent rom, i think it's not because the rom and the kernel since i have flashed many roms and kernels.
so, my problem is my battery indicator get stucked at 100%, and suddenly 0% and my phone turn off. if i charge, it shows 100%.
i have flashed stock rom, clear battery status via cwm and the problem still there.
how to fix it? i frustrated
coconut.
thanks
Click to expand...
Click to collapse
change kernel you may revert back after some time
hello first of all thanks to iiandskater for this lovely rom.i really love this rom,hence i was using cm10 for my sk17i ,after i see this rom i tried to install it on my sk17i,i followed the steps just like ur post,first i wiped all and afterwards i flashed jv 5.3 and then dev files for mango also then gapps and keyboard but afterwards i got one bug that my hardware keys are not working:crying:.so i saw from ur thread 1) first flash jv 5,3 then 2) addons 3)key board language packs 4)flashed dev for files for mango u provided and it worked for me :good: but all of the times i was not getting wifi even i downloaded the kernel that u provieded.i really appreciate your hardwork for making this rom ,hope i will get a solution and sorry for anything i mentioned here badly because its my first post:crying:
Thanks again to iiandskater for making this wonderful rom:fingers-crossed::good:
[Q] [ROM][4.2.2][ALL MDPI] JellyVanilla EX 5.3 | WIFI is not working in SK17
annadian said:
hello first of all thanks to iiandskater for this lovely rom.i really love this rom,hence i was using cm10 for my sk17i ,after i see this rom i tried to install it on my sk17i,i followed the steps just like ur post,first i wiped all and afterwards i flashed jv 5.3 and then dev files for mango also then gapps and keyboard but afterwards i got one bug that my hardware keys are not working:crying:.so i saw from ur thread 1) first flash jv 5,3 then 2) addons 3)key board language packs 4)flashed dev for files for mango u provided and it worked for me :good: but all of the times i was not getting wifi even i downloaded the kernel that u provieded.i really appreciate your hardwork for making this rom ,hope i will get a solution and sorry for anything i mentioned here badly because its my first post:crying:
Thanks again to iiandskater for making this wonderful rom:fingers-crossed::good:
Click to expand...
Click to collapse
pls anyone help me to fix this issue
annadian said:
pls anyone help me to fix this issue
Click to expand...
Click to collapse
wifi means is it wifi hotspot or just wifi
anyways many custom rom has problems with wifi so it may not work properly please contact the dev of this rom
try any 3rd party apps for using wifi that may work
its wifi not turning on, i will try to download thirdparty applications
sangalaxy said:
wifi means is it wifi hotspot or just wifi
anyways many custom rom has problems with wifi so it may not work properly please contact the dev of this rom
try any 3rd party apps for using wifi that may work
Click to expand...
Click to collapse
its wifi not turning on, i will try to download thirdparty applications and inform u here i will upload screenshots
tried wifi manger but tried wifi manger but still cant turn on wifi
annadian said:
its wifi not turning on, i will try to download thirdparty applications and inform u here i will upload screenshots
Click to expand...
Click to collapse
tried wifi manger but tried wifi manger but still cant turn on wifi:crying:
i saw mango has got bugs but is that WIFI not turning ON ?
annadian said:
tried wifi manger but tried wifi manger but still cant turn on wifi:crying:
Click to expand...
Click to collapse
i saw mango has got bugs but is that WIFI not turning ON ?hope someone can really help me to find this bug
a
and i cannot post to dev thread iam new here:crying:
annadian said:
i saw mango has got bugs but is that WIFI not turning ON ?hope someone can really help me to find this bug
a
and i cannot post to dev thread iam new here:crying:
Click to expand...
Click to collapse
check on dev thread may be someone already reported this issue and may be they got solved
so check the original thread
anyway thanks for ur reply
sangalaxy said:
check on dev thread may be someone already reported this issue and may be they got solved
so check the original thread
Click to expand...
Click to collapse
thanks for ur responce
i saw it in the dev forum also but with other device and in that one they said to flash the proper kernel for getting wifi.
and iam using the exact kernel mentioned by dev itself
hope there will be other solutions out there
waiting for it anyway thanks
annadian said:
thanks for ur responce
i saw it in the dev forum also but with other device and in that one they said to flash the proper kernel for getting wifi.
and iam using the exact kernel mentioned by dev itself
hope there will be other solutions out there
waiting for it anyway thanks
Click to expand...
Click to collapse
try any other kernel or your stock kernel may be it will work
ya i tried
sangalaxy said:
try any other kernel or your stock kernel may be it will work
Click to expand...
Click to collapse
yes i tried lupus kernel because it was working fine with my cm 10 and also NAA kernel and also mikes+naa kernel and also stock kernel
but all failed some wont boot up and some will work except wifi
:crying:
i think iam thinking to go back to cm or try LX cm10.2 for my sk17i
wil wait for few hours though
anyway thanks for ur suggestion
i tried everything in the dev forum but
annadian said:
yes i tried lupus kernel because it was working fine with my cm 10 and also NAA kernel and also mikes+naa kernel and also stock kernel
but all failed some wont boot up and some will work except wifi
:crying:
i think iam thinking to go back to cm or try LX cm10.2 for my sk17i
wil wait for few hours though
anyway thanks for ur suggestion
Click to expand...
Click to collapse
i tried everthing in the dev forum
but none work for me
anyway i really love this rom
maybe after few weeks all the issues will be solved and hope i can try this rom again,,
now im on legacy xperias cm10.2
it works great for me even with wifi
waiting to see dev to find and help me to solve this issue
finally i was able to get my WIFI working in my sk17i
:laugh::good:
annadian said:
i tried everthing in the dev forum
but none work for me
anyway i really love this rom
maybe after few weeks all the issues will be solved and hope i can try this rom again,,
now im on legacy xperias cm10.2
it works great for me even with wifi
waiting to see dev to find and help me to solve this issue
Click to expand...
Click to collapse
:laugh::good:
finally WIFI is working fine in my sk17i with jellyvanilla 5.3
i installed fxps cm10.2
and i thought of trying jv again
so i first flashed kernel provided in the zip
and then
done full wipe
system,cache,and system format
:good:
then installed jv from recovery
but first i was not able to boot in to recovery but afterwards i installed xparts from the market and then clicked boot in to recovery from that
but again i wasnt able to boot in to recovery then i saw post from devs forum it happens due to minor bug in fxps kernel so after clicking boot in to recovery just need to press menu button once and it worked perfect for me
:good:
and i flashed light gapps and xperia keyboard and booted again
and my wifi was working perfectly in my sk17i
but only one issue is my hardware keyboard is not working
so i flashed the dev files for mango too
and now my hardware keyboard also working and thanks iiandskater for this perfect rom for my sk17i
keep up the good work
hope i can get this rom for my st16i
jlo too
thanks
really love ur work
thanks all the dev here and all my fellow members and friends out here
enjoy:laugh::victory:
which kernel do you flsh?
plizz help... wifi on my SK17i not working too
thnx be4
Hello there
Here is the the CM11 made for X10
Still be in alpha 1 as not everything's working
Nearly same bugs as Evervolv 4.4.2 as bugs are due to kernel
Recovery access is working, sdcard mount only in recovery .
To download the ftf file it's here
To enter recovery mod :
wait the 2nd vibration
tap the screen
Don't forget to check "no final verification" in flashtool
Sources are available here on github
Only for unlocked bootloader device
First boot can be long, but cpu frequency is 998 so no problem with oc
Credits : CM Team, FXP for initial repo (tell me if I forgot someone
Good job.
"Envoyé depuis mon C6903 avec Tapatalk"
Tof37, you're the best!
Thanks How about 2.6 kernel? It will act better definetly.. Wish to see what kitkat could realy do on x10..
Thanks a lot
FeraVolt said:
Thanks How about 2.6 kernel? It will act better definetly.. Wish to see what kitkat could realy do on x10..
Thanks a lot
Click to expand...
Click to collapse
Building with an "old good" 2.6.29 for now ... if it's ok it'll be the v1 for cm11 and evervolv's rom
:fingers-crossed:
@FeraVolt
I need your egl files !!! would you send me them please ? I can't remember where they are not good to be old...
EDIT : Found them ... rom is booting but no display ; see log
Tof37 said:
Building with an "old good" 2.6.29 for now ... if it's ok it'll be the v1 for cm11 and evervolv's rom
:fingers-crossed:
@FeraVolt
I need your egl files !!! would you send me them please ? I can't remember where they are not good to be old...
EDIT : Found them ... rom is booting but no display ; see log
Click to expand...
Click to collapse
as you can see the SurfaceFlinger is the problem ..
W/SurfaceFlinger( 1182): getting VSYNC period from fb HAL: 6535947
W/SurfaceFlinger( 1182): no suitable EGLConfig found, trying a simpler query
F/SurfaceFlinger( 1182): no suitable EGLConfig found, giving up
F/libc ( 1182): Fatal signal 6 (SIGABRT) at 0x0000049e (code=-6), thread 1182 (surfaceflinger)
chack your sources..
Tof37 said:
Building with an "old good" 2.6.29 for now ... if it's ok it'll be the v1 for cm11 and evervolv's rom
:fingers-crossed:
@FeraVolt
I need your egl files !!! would you send me them please ? I can't remember where they are not good to be old...
EDIT : Found them ... rom is booting but no display ; see log
Click to expand...
Click to collapse
Thanks dude.. I know my kernel boots but without display.. I said that graphical part needed to be updated to work on 4.x roms since current kernel setup is very "mutant" (GB KGSL - new FB - Tripple Buffering - 32bpp & many many more things..). You may just try to replace whole KGSL and Video/MSM folders with board config & misc updates from scritch v21 kernel.. we will loose 32bpp.. but i think it will be enough... one more thing.. I didn't updated msm_mdp.h it's old. because new verion starves double more PMEM than default and returns black & white camera.. so my video folder is tuned that way.. So i believe it's totally kernel fault.. BUT this setup works perfectly on GB. Maybe you realy can bypass/modify current surfaceflinger.. since current kernel setup is that what i realy want to see in 4.x roms.. I belive that there we will have HW video recording working super fine..
Also I wish to advice you LegacyXperia CM11 sources.. This project is created to be close as much as possible to original CM11 development but is optimized for legacy xperia devices (2011)(things like default browser..torch..data..etc).. Thank you very much...
Boots without problems.
Attached the following dmesg log.
If there's something you're looking for in specific let us know.
Thank you for your ongoing hard work.
Finally got sdcard mount and ums working... will update device tree later .
Got boot with an "old" 2.6.29 kernel.
Have to fix wifi and bt now....
Sent from my XT890 using xda app-developers app
Maybe this is just me, or does anyone also have their sdcard almost wiped out while using this ROM? I'm not sure what caused it, but all that I know is that a lot of my files are missing ever since I booted into this ROM. I remember wiping the data with the recovery from this kernel, but again, I am not sure if that is the cause of it. If not, it might be something else that I did before that, that is why I need to know if anyone else experienced the same thing as me.
I'm not expecting anything from a pre-alpha build, but the fact that it boots and we have a hope alone fascinates me.
Hzu said:
Maybe this is just me, or does anyone also have their sdcard almost wiped out while using this ROM? I'm not sure what caused it, but all that I know is that a lot of my files are missing ever since I booted into this ROM. I remember wiping the data with the recovery from this kernel, but again, I am not sure if that is the cause of it. If not, it might be something else that I did before that, that is why I need to know if anyone else experienced the same thing as me.
I'm not expecting anything from a pre-alpha build, but the fact that it boots and we have a hope alone fascinates me.
Click to expand...
Click to collapse
Strange issue ... didn't noticed that ...
As sdcard was only recognised and mounted in recovery + you may have app installed on your sd, wiping data should be the cause.
Can't be rom installation cause sd is not mounted / recognized in user land.
As Hzu asked, did someone else had this issue ?
Tof37 said:
As Hzu asked, did someone else had this issue ?
Click to expand...
Click to collapse
No it must have been something in his phone, i did not have any problems, rom buted fine, and when i returned to feras v37 everything was ok.
Tof37 said:
As Hzu asked, did someone else had this issue ?
Click to expand...
Click to collapse
I also do not have any problem with this ROM. Some thing is wrong with him..................................
Kornelije23 said:
No it must have been something in his phone, i did not have any problems, rom booted fine, and when I returned to feras v37 everything was ok.
Click to expand...
Click to collapse
Same here, but I returned to Tof37 GB 2.3 X10S v9 ROM
CWM recovery and all fine.
Dr Goodvibes said:
Same here, but I returned to Tof37 GB 2.3 X10S v9 ROM
CWM recovery and all fine.
Click to expand...
Click to collapse
How good is that room compaired to feras v37, i have tried x10s v9 a long time ago, so is it worth trying it again ?
Tof37 said:
Strange issue ... didn't noticed that ...
As sdcard was only recognised and mounted in recovery + you may have app installed on your sd, wiping data should be the cause.
Can't be rom installation cause sd is not mounted / recognized in user land.
As Hzu asked, did someone else had this issue ?
Click to expand...
Click to collapse
Kornelije23 said:
No it must have been something in his phone, i did not have any problems, rom buted fine, and when i returned to feras v37 everything was ok.
Click to expand...
Click to collapse
kamalyaadav said:
I also do not have any problem with this ROM. Some thing is wrong with him..................................
Click to expand...
Click to collapse
Dr Goodvibes said:
Same here, but I returned to Tof37 GB 2.3 X10S v9 ROM
CWM recovery and all fine.
Click to expand...
Click to collapse
I see, thank you for your responses. Something must have happened before I flashed the ROM. Well, a lot of things happened, but I'm glad it's not this ROM that caused it.
Kornelije23 said:
How good is that room compaired to feras v37, i have tried x10s v9 a long time ago, so is it worth trying it again ?
Click to expand...
Click to collapse
um since this alpha alot of things dont work like the wifi/camera/audio/bluetooth/many applications.......and as such is not suited for daily use but its snappy and for a alpha is quite stable .
Any progress bro ????????
or we should forget about this rom, because this is too much wait.
Can someone tell what work/doesn't work, wifi work?
Adigo18 said:
Can someone tell what work/doesn't work, wifi work?
Click to expand...
Click to collapse
Well ...
As wrote in op the rom boots, calls sms mms seem to work but wifi not ...
No camera and many other things don't work.
Since may didn't made any progress with kernel / kitkat based rom due to personnal reasons.
However, this project is not stopped, just can't when I'll be able to do work on it ... sorry