Related
Hi guys,
I figured I'll post again here since I think I bricked my phone.... I was trying to install Eugene's Vibrant6.zip and I got stuck on the Vibrant Logo with Samsung at the bottom. I tried to reset with both volume buttons and power button and got to grey battery and nothing else...
What I did prior to this was I formatted system and data on the recovery screen as per some posts here and it would just boot into a loop. Windows won't recognize a device and it just shows grey battery image and it doesn't seem to be charging. Anyone can help me?
EDIT:
Out and in the battery, plugged in to USB and it just loads the battery image and it's all grey color as if fully discharged and just stuck on it. Device is also not found in my system so I can't do any adb commands. If I just reset it without the cable it would just sit on the Samsung boot loop. Anything I can do?
UPDATE: Ok, some good news! I heard the sound as it connected via USB, I can see the 2 drives, but they read as Removable Disk and I can't access them...
adb reboot recovery or download
error: device not found
What if simply format the drives via Windows right click menu? Will that do any good or bad? What are my options here? Any help will be appreciated!
UPDATE: Well... looks like this is pretty much a dead phone.... I right clicked and selected Format in My Computer and it just says There is no disk in Driver F: Insert a disk and try again.
Can I a mount an image somehow via MagicISO? Or is there something simpler that I just can't figure out?
Again, thanks for your help!
Thanks.
Has anyone experienced this or am I the only one?
M5devil said:
Has anyone experienced this or am I the only one?
Click to expand...
Click to collapse
Sorry I have never heard of this or witnessed it while flashing anything to my device. Obviously the battery screen signifies that the phone is off but is in charging mode and hitting the power button will boot the device up. (I'm sure you already know of this). Never heard of it being stuck at that screen after flashing. Hopefully you can get this solved soon. Good luck
M5devil said:
Hi guys,
I figured I'll post again here since I think I bricked my phone.... I was trying to install Eugene's Vibrant6.zip and I got stuck on the Vibrant Logo with Samsung at the bottom. I tried to reset with both volume buttons and power button and got to grey battery and nothing else...
What I did prior to this was I formatted system and data on the recovery screen as per some posts here and it would just boot into a loop. Windows won't recognize a device and it just shows grey battery image and it doesn't seem to be charging. Anyone can help me?
EDIT:
Out and in the battery, plugged in to USB and it just loads the battery image and it's all grey color as if fully discharged and just stuck on it. Device is also not found in my system so I can't do any adb commands. If I just reset it without the cable it would just sit on the Samsung boot loop. Anything I can do?
UPDATE: Ok, some good news! I heard the sound as it connected via USB, I can see the 2 drives, but they read as Removable Disk and I can't access them...
adb reboot recovery or download
error: device not found
What if simply format the drives via Windows right click menu? Will that do any good or bad? What are my options here? Any help will be appreciated!
UPDATE: Well... looks like this is pretty much a dead phone.... I right clicked and selected Format in My Computer and it just says There is no disk in Driver F: Insert a disk and try again.
Can I a mount an image somehow via MagicISO? Or is there something simpler that I just can't figure out?
Again, thanks for your help!
Thanks.
Click to expand...
Click to collapse
Slow down for a second. Your phone is definitely not bricked. Ive been over the edge, and been able to bring my phone back to life.
To clarify, you flashed vibrant6.zip through clockwork mod, and then the phone got stuck on the samsung S? How long did you let it sit there?
It sounds like just your ROM is messed up.
Are you able to "get into recovery"? Holding both volume buttons while you power on the phone, without it being plugged into usb.
Do you have Odin? And have you ever used it?
Its totally frustrating when your phone gets messed up and you don't know what to do.
I flashed the stock ROM via Odin and then wanted to install Vibrant6.zip. For that I entered into a recovery mode via Clockwork and as someone in the other thread advised, I formatted system and also data, don't recall exactly. Then it looped to a standard recovery mode and I just rebooted the phone. This is where it got stuck... Vibrant in the center and Samsung at the bottom of the screen. To test it I left it like that from night till this morning. In the morning I woke up it was on the same boot screen.
Before that at night, after seeing it hand at the boot, I held both volume keys and power, waited for it to reboot, and immediately it showed a circular progress bar, but not moving just highlighted the 12 o'clock bar and second later I see the battery image all in gray and nothing else. It just sits on that grey static image without actually charging it (no green section or flashing dots)
Boot logo only appears if I am trying to reset without the USB cable. On the boot loop I plug in the cable and I hear the USB connecting it, I see the 2 Removable disks, but both inaccessible and adb commands don't recognize the device.
Very weird, as in turned off mode it's not charging at all.. just shows this grey battery image with a circle progress froze on 12 o'clock bar.
That's pretty much it.... I was never able to enter into recovery nor download via the buttons. It would just always reboot into this grey battery screen....
Completely helpless.... I did order a new battery from TMO, maybe the battery is fried and that's why it's not charging and just sits on this stupid static grey battery screen.
ArbitrageMan said:
It sounds like just your ROM is messed up.
Are you able to "get into recovery"? Holding both volume buttons while you power on the phone, without it being plugged into usb.
Do you have Odin? And have you ever used it?
Its totally frustrating when your phone gets messed up and you don't know what to do.
Click to expand...
Click to collapse
Holding both volume keys and releasing power once screen goes blank, only show Vibrant logo again... I have tried this a million times
With USB cable it shows grey battery screen, without the cable just a Vibrant boot loop...
I'm assuming that you have the Samsung drivers installed.
Try the following steps:
Take out the battery and then put it back in but don't turn the phone on.
Plug it via USB.. does anything show up on the screen?
zephiK said:
I'm assuming that you have the Samsung drivers installed.
Try the following steps:
Take out the battery and then put it back in but don't turn the phone on.
Plug it via USB.. does anything show up on the screen?
Click to expand...
Click to collapse
Yes, I have the drivers installed as I was able to locate my device and use adb commands to enter into recovery and download. Also Kies worked.
Doing what you asked simply load the grey battery image and nothing else with a progress bar not spinning. Just sort of hangs on this image and that's all.
Booting without the USB cable loads the Vibrant boot loop. Connecting USB at this boot loop state, would play a sound as if it connected to my windows, but I can only see Removable disks that are inaccessible and adb doesn't find the device...
Very strange.... trying to use the button keys to enter into recovery or download is no use, as that just won't ever happen, even when phone was working fine.
Any other suggestions? I would return the phone for replacement... but I am not sure how it would look with all the files still on the internal disk including root if I am not mistaken... I had only few hours of sleep because of this headache
M5devil said:
Yes, I have the drivers installed as I was able to locate my device and use adb commands to enter into recovery and download. Also Kies worked.
Doing what you asked simply load the grey battery image and nothing else with a progress bar not spinning. Just sort of hangs on this image and that's all.
Booting without the USB cable loads the Vibrant boot loop. Connecting USB at this boot loop state, would play a sound as if it connected to my windows, but I can only see Removable disks that are inaccessible and adb doesn't find the device...
Very strange.... trying to use the button keys to enter into recovery or download is no use, as that just won't ever happen, even when phone was working fine.
Any other suggestions? I would return the phone for replacement... but I am not sure how it would look with all the files still on the internal disk including root if I am not mistaken... I had only few hours of sleep because of this headache
Click to expand...
Click to collapse
Are you sure that you're doing the right things to get to download? I've been in this situation and I wasn't able to get into recovery but I was able to get back into download mode.
I believe if you return it back and they find out it was rooted, they will charge you for it. If not, it'll appear on your bill.
I'm sure that you're doing the wrong things to get into download mode. If something is appearing on your screen it is a soft-brick and you're not bricked.
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen (powers on its own when plugged in)
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
Click to expand...
Click to collapse
A tip to get into download mode is to put the phone HORIZONTALLY (sideways) and it will make it a lot easier.
I am pretty much positive about it. I know a lot of people can easily enter into recovery or download modes, but I know many can't and I am one of them. It would just load the grey battery image instantly as I let go of the power button.
1. Take out battery, put it back in. (to turn the phone fully off) DONE
2. Don't turn it the phone on! DONE
3. Plug the phone into your PC, do not hit the power button! DONE
4. See if the phone shows anything on the screen (powers on its own when plugged in) FIRST THING THAT APPEARS IS A CIRCULAR PROGRESS BAR THAT CHANGES TO A GREY BATTERY IMAGE WITH A BAR IN THE MIDDLE OF IT. STATIC IMAGE, NOTHING ELSE.
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons. DONE
6. Hold the power button as well as the volume buttons until the screen goes black. DONE
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons! DONE
THE STUPID GREY COLOR BATTERY IMAGE APPEARS AS BEFORE....
I'm thinking maybe battery is fried and that's why the grey color screen appears and not the usual screen where you see the battery charging...
After reading this thread it's clear that my handset is one of the new ones that have recovery/download modes disabled via the volume+power buttons.
So that pretty much covers it... I hope TMO will not ***** about the files that are on the internal sd that I am unable to access and remove... unless anyone else has any fresh ideals how to gain access to the disk
I think I might have a similar problem.
I accidentally deleted the touchwiz framework so I can't do anything ON the phone. It boots up, and gets me to the lock screen. As soon as I unlock, I am greeted with dozens of unending force closes.
I can get into both download and recovery mode, however, I have not been able to get ADB to recognize the device. I am attempting to push the stock ROM to the internal memory to flash over everything.
I'm not sure what to do to get ADB to work but it's driving me nuts!
Stuck at vibrant? I have a fix
Check out android Dev Section... I figured out how to access download mode or stock recovery mode when you are stuck at the vibrant screen!!!! BACK IN BUSINESS VIBRANT OWNERS!!!
i got the same problem and nothing seems to work
Try this out http://forum.xda-developers.com/showthread.php?t=1103706
Feels like I'm having same issues..
the previous post requires opening the phone and I don't have tools for that..
Here's my issue.
I can't get into Recovery or Download and computer won't see phone to Odin.
I've got drivers installed and AIO Toolbox as well as ADB(which won't work because of computer not seeing phone.
Using the manual option(vol+ vol- power), nothing works.
I've done all the tricks like unplug it then hold vol keys plug it insert battery..
When I do plug in the phone to to even just get a charge in it goes the the battery, but my is is frozen or something. doesn't turn green or have a charging animation. After about a minute or so it was start up and boot loop. I read something about a bad battery? I've got two of them and they seemed fine before..
Before all this I had to Odin and go to stock. I was attempting to get ics back but I was being lazy and trying to do as little as possible..bad idea. I was following slim ics install and flashed cm9 daily, slimics and commons..and now this..
I'm not sure what to do..I usually search around xda or google..10 hours later.. idk..Anyone able to give help please?
:crying:
eduardo_reflex said:
i got the same problem and nothing seems to work
Click to expand...
Click to collapse
... do i even have to say it?
droyd666 said:
Try this out http://forum.xda-developers.com/showthread.php?t=1103706
Click to expand...
Click to collapse
this problem is most likely solved. After 2 years!
mylostlonelysoul said:
Feels like I'm having same issues..
the previous post requires opening the phone and I don't have tools for that..
Here's my issue.
I can't get into Recovery or Download and computer won't see phone to Odin.
I've got drivers installed and AIO Toolbox as well as ADB(which won't work because of computer not seeing phone.
Using the manual option(vol+ vol- power), nothing works.
I've done all the tricks like unplug it then hold vol keys plug it insert battery..
When I do plug in the phone to to even just get a charge in it goes the the battery, but my is is frozen or something. doesn't turn green or have a charging animation. After about a minute or so it was start up and boot loop. I read something about a bad battery? I've got two of them and they seemed fine before..
Before all this I had to Odin and go to stock. I was attempting to get ics back but I was being lazy and trying to do as little as possible..bad idea. I was following slim ics install and flashed cm9 daily, slimics and commons..and now this..
I'm not sure what to do..I usually search around xda or google..10 hours later.. idk..Anyone able to give help please?
:crying:
Click to expand...
Click to collapse
Try asking another question. But I suggest using a USB jig. They usually work. Then odin
Sent from Mount Olympus via Hermes
Did you ever get it fixed man? I literally did the very same to mine a while back and It works like butter as we speak. It is fixable with a mini-usb jig or dongle. You can make your own with about $3 worth of parts from radio shack but I recommend buying one, it will be easier. I for the record made mine simply twisting together the resistors and though it was tough to touch the right pins it did eventually work and get me back into download mode.
Hopefully you already got it fixed though. If not I can help you out.
PLease can anyone let me know the process to load a rom onto a HD2 that will not boot up....? Windows mobile device center will not detect it either. Bootlogger screen says I have SPL-2.08.HSPL 8G XE, and underneath it says CotullaHSPL if that is any help. I would really appreciate any help!
lisah456 said:
PLease can anyone let me know the process to load a rom onto a HD2 that will not boot up....? Windows mobile device center will not detect it either. Bootlogger screen says I have SPL-2.08.HSPL 8G XE, and underneath it says CotullaHSPL if that is any help. I would really appreciate any help!
Click to expand...
Click to collapse
After task 29 you have to flash a ROM. Task 29 wipes your device so if you don't hold down the volume down key at the end of task 29 it will not have any operating system. Just remove the battery and hold down the volume down key till you see the bootloader screen. Then flash your ROM and all is ok.
after task29,when your device reboot
press botton "volume down" and will go in bootloader mode
now if you have your device stuck in white screen,remove battery cover
press red botton for softrest and press "Volume down" botton
bobsbbq said:
After task 29 you have to flash a ROM. Task 29 wipes your device so if you don't hold down the volume down key at the end of task 29 it will not have any operating system. Just remove the battery and hold down the volume down key till you see the bootloader screen. Then flash your ROM and all is ok.
Click to expand...
Click to collapse
opsss..sorry bob
i have look now your post
My problem is that the windows mobile says that the phone is not connected?
What do I do now?
Thanking you in advanced,
Henry
kikimax said:
My problem is that the windows mobile says that the phone is not connected?
What do I do now?
Thanking you in advanced,
Henry
Click to expand...
Click to collapse
It won't because you're in the bootloader. Does it say USB at the bottom of the bootloader screen? As long as it says USB when the phone is plugged into your computer, flash a ROM and be happy
Hello!
And what if my hd2 not entering into the boot loader?
Thanx in advance
There is only one way to get into the bootloader.
Hold down volume and keep it down....
After that press the start button and your phone will boot up.
Now you will see the tree colored screen and you're in the bootloader.
Goodluck.
same problem..connected to pc but wmdc doesn't discover it so i can't flash anything.and sd card flash doesn't help.what can i do now?
wopin80 said:
same problem..connected to pc but wmdc doesn't discover it so i can't flash anything.and sd card flash doesn't help.what can i do now?
Click to expand...
Click to collapse
When you are in the bootloader screen, connect the phone to the computer /with the usb cable/ on the same bootloader screen it will change to USB - look at the bottom of the screen:
Open the folder - on your computer - where the ROM you want to flash is:
find the "RomUpdate*.exe" or "Install.exe" /if Android it will most likely say "DAF.exe" - run it as Administrator/ file and run it. Do as it says on the screen.
Do not disconnect the cable, do not touch the device. When it is finnished it will restart the device, disconnect the cable and enjoy your new OS.
wopin80 said:
same problem..connected to pc but wmdc doesn't discover it so i can't flash anything.and sd card flash doesn't help.what can i do now?
Click to expand...
Click to collapse
use a <4gb or preferably <2gb sd card - class 4 or 2 with LEOIMG.nbh.
HSPL3_pkg after that - make sure .nbh (as above on sd root) is your stock and you CLEAN-reinstall bootloader.
ps:
Then hspl, then radio, then magldr, then windows 7, the hacks, then call M$= LIVE!
Hi guys i have a similar problem. After task 29 i went into the bootloader but can't install any rom whatsoever. I have SPL 3.03 on my devide, mind no not hard spl but SPL. Can anyone please help me solve this issue? I also tried to flash using sd card but it doesn't work. Please help me save my hd2. Thanks in advance.
tmo-hd2 wont go into bootloader after task29
Hi guys, i am facing exact same thing which dannytgt faced (http://forum.xda-developers.com/show...count=1)...but with no luck what so ever.....was running a stock rom in my hd2 3.14....wanted to try wp7 and did a task29....after that...hd2 doesnt go into bootloader screen....tried all possible combinations with/without sd,sim, holding vol down, vol up, both with power tapped...power holded etc etc...hd2 always goes into stick together screen and doesnt progress as there is os to load....opened up the mobile and tried with a pin to push the vol down switch directly also....all hardware keys were working gr8 (including vol down and up and power keys) whn win 6.5/android was running.
i know for the fact that this is reversable....if only my hd2 can get to bootloader...i will hv os running in a jiffy....
any ideas ppl? my hd2 is 3 months old ...no warrenty cos i bought it in US and using it in india..
bootloader dont load
some more details...tried to task29 (doloop) with 100% success and then my tmo hd2 wont go into bootscreen what ever i do...its stuck for ever in "stick together"...i know there is no os to load...but i dont understand y cant my hd2 go intobootloader
so far i tried
with holding volume down and power key with a single tap
with holding volume down and holding power key
with holding volume down, volume up and power key with a single tap
with holding volume down and reset button
with/without sim
with/without SD
with/without plug in wall charger
with/without plug to pc via usb cable
observations...when i pull out the battery and put it back in and then connect to computer when the phone is still off....the charging indicator LED glows in orange.
when in this mode if i switch the phone on with power/end key....it doent start...i have to pull the usb out, the orange LED still glows...and if i tap the power/end key nothing happenes...i have to pullout the battery to get it to start and eventually get stuck in "stick together"..
would really appriciate if any1 can help me get my hd2 into bootloader screen...
gdsbalaji said:
some more details...tried to task29 (doloop) with 100% success and then my tmo hd2 wont go into bootscreen what ever i do...its stuck for ever in "stick together"...i know there is no os to load...but i dont understand y cant my hd2 go intobootloader
so far i tried
with holding volume down and power key with a single tap
with holding volume down and holding power key
with holding volume down, volume up and power key with a single tap
with holding volume down and reset button
with/without sim
with/without SD
with/without plug in wall charger
with/without plug to pc via usb cable
observations...when i pull out the battery and put it back in and then connect to computer when the phone is still off....the charging indicator LED glows in orange.
when in this mode if i switch the phone on with power/end key....it doent start...i have to pull the usb out, the orange LED still glows...and if i tap the power/end key nothing happenes...i have to pullout the battery to get it to start and eventually get stuck in "stick together"..
would really appriciate if any1 can help me get my hd2 into bootloader screen...
Click to expand...
Click to collapse
Isn't it ironic: Stick together!...
There is a guide on How to get back from WP7 here on the forum.
First i would sugest to reformat the card from WP7 bul...
If i understand correctly, you can't get into bootloader or magldr!?
So you can't do nothing?
You can try this sollution and if it doesn't work, go to the service center to reset it totaly.
There was a guy with the same problem here:
Originally Posted by splinters69 View Post
This (or something similar) happened to me. I powered down my phone but did not take out the battery and it restarted the part that loads the win 7 rom while I still got the screen with the coloured bands on.
Try, taking out the battery for 10 seconds or so then put it in while holding the volume down key and powering up.
Got stock ROM back in first time but kiss goodbye to the data on your SD card. I had to use a Canon camera to reformat the card to get back the 14GB it was hiding.
This WORKED. Thanks a TON splinters69.
For future uses, this is what I did.
1. Took out the battery for about 30 seconds.
2. Put one of the LEOIMG.NBH on storage card
3. After putting the battery held the volume down button and pressed power button.
4. It went into HSPL mode straight away and started loading the win 6.5 OS.
You saved the day Splinters69. Thanks to Clydeb1 too for that modelIDcheckbypass.
http://forum.xda-developers.com/showthread.php?t=913081
lms1407 said:
Isn't it ironic: Stick together!...
There is a guide on How to get back from WP7 here on the forum.
First i would sugest to reformat the card from WP7 bul...
If i understand correctly, you can't get into bootloader or magldr!?
So you can't do nothing?
You can try this sollution and if it doesn't work, go to the service center to reset it totaly.
There was a guy with the same problem here:
Originally Posted by splinters69 View Post
This (or something similar) happened to me. I powered down my phone but did not take out the battery and it restarted the part that loads the win 7 rom while I still got the screen with the coloured bands on.
Try, taking out the battery for 10 seconds or so then put it in while holding the volume down key and powering up.
Got stock ROM back in first time but kiss goodbye to the data on your SD card. I had to use a Canon camera to reformat the card to get back the 14GB it was hiding.
This WORKED. Thanks a TON splinters69.
For future uses, this is what I did.
1. Took out the battery for about 30 seconds.
2. Put one of the LEOIMG.NBH on storage card
3. After putting the battery held the volume down button and pressed power button.
4. It went into HSPL mode straight away and started loading the win 6.5 OS.
You saved the day Splinters69. Thanks to Clydeb1 too for that modelIDcheckbypass.
http://forum.xda-developers.com/showthread.php?t=913081
Click to expand...
Click to collapse
I hvnt even instaled MGALDR yet....task29 and hd2 went into trouble...need to get to bootloader to save it now
Tried this as well before posting....hv a 2gb sd card>formatted to fat 32> stock rrunbh to leoimg.nbh > moved to root of sd card....but this can only work if bootloader can be initiated right? i cant get to boot loader
resolved the problem myself.....hd2 is working like a charm....thanks for all your support.
SOLVED {bootloader dont load}
checkout the solution for my problem here....might help u as well.
http://forum.xda-developers.com/showpost.php?p=10644926&postcount=4
______________________________
if you feel this helped...thank me
hi there i have realy big problem i have done that task 29 trick with the blackstone advangeruu and there was something wrong after restart so i pulled the battery out.
now my phone wont do any thing when i hold nowd the start button en volume down i know it has no os. but is there any way to get in the bootloader screen hope some one can help me beceasue i need my phone.
DeAdMaNwa said:
hi there i have realy big problem i have done that task 29 trick with the blackstone advangeruu and there was something wrong after restart so i pulled the battery out.
now my phone wont do any thing when i hold nowd the start button en volume down i know it has no os. but is there any way to get in the bootloader screen hope some one can help me beceasue i need my phone.
Click to expand...
Click to collapse
Man, did you say blackstone? You should go into Blackstone forum
To go into bootloader, turn off the phone. Press volume down button and the POWER ON button (not start button) at the same time until the screen appear. It works on both Leo and Black Stone
Goodluck
I have a hardware locked vibrant, but with I've been getting by with adb to get into recovery to root and install CWM and ROMS.
Recently my phone got interrupted while doing an Odin restore and now i've bricked my phone. I get the "Phone ! PC" screen everytime I power up.
I can't use adb orCWM to boot into download mode, and my phone has never responded to any combination of buttons on start-up to get it there. What else could I do?
I heard this is considered a defect, if it is hopeless to fix should I try to return it to t-mobile even though it's bricked? or just report it lost?
EDIT: FIXED!
Thanks Beniuec for pointing me to the JIG
http://forum.xda-developers.com/showthread.php?t=819551
I went to radio shack, picked up some resistors, and it worked like a charm!
I have a very similar problem. My phone got stuck on the Vibrant boot screen after trying to flash a rom. I can't get my phone into download mode so that I can use ODIN. All it does it stay stuck on the Vibrant Boot screen. Can't start the phone, can't get into recovery. If anybody can help us, that would be great. I do hear that most phones should be able to get into recovery mode if not then we should return it. My problem is that I bought my phone on eBay. I can't return it to T-Mobile.
If you can get into the vibrant boot screen you may be able to use ADB to reboot into download mode.
connect to your PC and go to the command prompt where you have adb installed
Code:
abd devices
Code:
adb reboot download
It doesn't recognize my device. Under list of devices, it is blank.
You might have to make this or post if anyone in your area has made one since nothing else works for you good luck
homemade test jig
http://forum.xda-developers.com/showthread.php?t=819551
Sent from my SGH-T959 using XDA App
Oooh =/ That happened to me.
But I got it fixed
IDK if this will work w/ hardware locked (nor do i even know what hardware locked is):
What I did was power off the phone, charged it, you should see a battery appear. When that happens, then press power, vol up, vol down, hold those button.
AS SOON AS THE SCREEN TURNS BLACK, release power, and it should get you into DL mode, then you may unplug, then odin, then restore it
GL
Here is a couple of methods to get into download mode. Once you get to download mode, follow the directions later in my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on, immediately release the power button but not the other two. You should be in dl mode.
Second Method
1) Another method that seems to work for some people is to pull the battery, sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep holding all 3 buttons until the vibrant disappears and reappears. Once it reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download mode.
Once in download mode
Download the files in the linked thread and follow the directions there or the ones below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected. If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
Also, you might have to build the usb jig. It is guaranteed to get you into download mode. Here is a link to that thread:
http://forum.xda-developers.com/showthread.php?t=819551
Since you're hardware-locked, your only choice is the usb jig or returning the phone (If you got it from T-Mobile, they may replace on grounds of faulty hardware, like they did for my first Vibrant). Seems like the jig is the easiest option, so long as you or someone you know can solder the thing, and it is pretty much guaranteed to work.
Beniuec said:
You might have to make this or post if anyone in your area has made one since nothing else works for you good luck
homemade test jig
http://forum.xda-developers.com/showthread.php?t=819551
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Awesome. This is exactly what I was looking for, I could easily make this jig as I have plenty of experience soldering. I'll try this out and report back the results!
Good luck let me know how it works send me a pm incase I lose the thread
Sent from my SGH-T959 using XDA App
Hey everyone.
So the other day I got excited about the CM7. I was following the steps to install it. i made a mistake. after i flashed the kernel. i rebooted my phone now all i get is a screen with picture of phone with a yellow triangle attached to a pc.
The thing i've tried to do was
1.take out the battery
2. take out the sim(which was already taken out to be in my gs4g)
3.took sd card out.
4.plug usb into phone and computer
5.put battery in while hitting the vol +/- minus rocker and nothing happens.i have odin open when I( try this.
my computer just wont pick it up.
when I plug in my gs4g it picks it up right away.
I've spent all weekend working on this.
also i think they only way before hand for me to get into download/recovery was for me to use adb. could that be why I'm not getting any progress?
Thanks in advance. Also sorry if this question has been asked so many times..
Is your problem getting into download mode? Or is it that you get into download mode but Odin won't recognize the device?
If its the former, getting into download mode is a bit tricky in CM7, I've done it plenty of times though. This worked for me.
1. Unplug the usb cord.
2. Pull out the battery.
3. Plug usb cord in.
4. Hold down vol+ & vol- and power button
5. You will see the loading circle or whatever it's called, when the screen goes black let go of power button.
You should be in download mode now. Sometimes you won't get the loading screen and the phone'll just boot up, if so pull the batt and try again.
Cito11 said:
Is your problem getting into download mode? Or is it that you get into download mode but Odin won't recognize the device?
If its the former, getting into download mode is a bit tricky in CM7, I've done it plenty of times though. This worked for me.
1. Unplug the usb cord.
2. Pull out the battery.
3. Plug usb cord in.
4. Hold down vol+ & vol- and power button
5. You will see the loading circle or whatever it's called, when the screen goes black let go of power button.
You should be in download mode now. Sometimes you won't get the loading screen and the phone'll just boot up, if so pull the batt and try again.
Click to expand...
Click to collapse
I've done that many times. I've tried for several hours during the weekend. Also CM7 is not installed yet. was in the middle of installing then this happend.
just open odin and plug your phone in to your pc and see if you get a COM port...if you do then flash it from there..
jmcghee1973 said:
just open odin and plug your phone in to your pc and see if you get a COM port...if you do then flash it from there..
Click to expand...
Click to collapse
not getting that at all no com ports show up.. I'm going to try this on a different computer.
When I get the black screen with that icon in the middle and I plug it in, Odin recognizes it right away. Furthermore, I've only gotten it before when I go into download mode(yellow sign + android sweeping) and Odin doesn't recognize my phone and I pull the battery then turn it back on.
Get odin up usb cord connected to the computer but not the phone
Remove the sim card the sd card and the battery and do the vol up and down boot. Then while holding the vol buttons down at the same time plug in the usb.
That should get you back to recovery.
READ the STICKY for NOOBS......... S15274N did a wonderful job of explaining all the methods on how to get into recovery from a soft brick
good luck
oka1 said:
Get odin up usb cord connected to the computer but not the phone
Remove the sim card the sd card and the battery and do the vol up and down boot. Then while holding the vol buttons down at the same time plug in the usb.
That should get you back to recovery.
READ the STICKY for NOOBS......... S15274N did a wonderful job of explaining all the methods on how to get into recovery from a soft brick
good luck
Click to expand...
Click to collapse
I've been trying all of those methods. Before this happened the only way for me to get into download was using adb reboot download command in adb.
The computer does not recognize in odin. I've tired this on two computers now.
I have all the drivers installed. i uninstalled ed reinstalled etc. used two different usb cables etc.
not sure what else to try. other than a baseball bat....
so i looked around and i bought a jig on ebay from skisky1. hopefully it will be here soon . to try this out .
My device used to be able to connect through ADB and my USB cable. I even used the recent 1-Click to Unlock and load Lineage OS. I have used fast boot before.
I recently tried to use 1 Click again to load GAPPS but during the process I got a notice that my device was disconnected which it really wasn't and the processed stopped. So now my Fire HDX 7" does not turn on at all. I know the battery was good and I left it plugged in overnight.
I have held the power button for 4 minutes. I have tried holding power+volume down, power+volume up. Nothing I have tried is working to even start it up. When I plug into the computer nothing is recognized. It used to be recognized but no longer does.
Can someone confirm I have a hard brick or is there hope for recovery?