I have tried multiple times to install CyanogenMod 11 on the System Slot with BMM. I keep getting
Code:
E:Error in /tmp/update.zip
(Status 6)
Installation Aborted
I tried flashing from sd and sideload...
this is the result of sideload.
Why is it doing this? Can't figure it out...
========
AFTER DIGGING DEEPER:
--
The official CM 11 thread states that BMM has issues with CM. This thread is pending for an answer,
WORKAROUND in Official Thread
Are u kidn... The workaround for bmm is on the first post of the cm11 thread...
vazersecurity said:
I have tried multiple times to install CyanogenMod 11 on the System Slot with BMM. I keep getting
Code:
E:Error in /tmp/update.zip
(Status 6)
Installation Aborted
I tried flashing from sd and sideload...
this is the result of sideload.
Why is it doing this? Can't figure it out...
========
AFTER DIGGING DEEPER:
--
The official CM 11 thread states that BMM has issues with CM. This thread is pending for an answer,
WORKAROUND in Official Thread
Click to expand...
Click to collapse
In the CM11 official forum shows a lot of times how to change the zip files to make it compatible with BMM.
Is easy but honestly, I recommend you to change to Safestrap, yes, I know, BMM is better but right now almost nobody uses it anymore.
iZak17 said:
In the CM11 official forum shows a lot of times how to change the zip files to make it compatible with BMM.
Is easy but honestly, I recommend you to change to Safestrap, yes, I know, BMM is better but right now almost nobody uses it anymore.
Click to expand...
Click to collapse
That's not true,a lot of people still using BMM,including me.
And it's still better than SS, there is more things that can be done with it.
Sent from my Razr XT910
welder73 said:
That's not true,a lot of people still using BMM,including me.
And it's still better than SS, there is more things that can be done with it.
Sent from my Razr XT910
Click to expand...
Click to collapse
Don't get me wrong, I know there is A LOT of people using BMM (including me until a few days ago). When I say "nobody" I'm refering to the support and compatibility: almost every thread related with new ROMs take as reference SS not BMM.
I'm fully sure BMM is totally better than SS. I did change because I was tired to zip, unzip, copy and replace files everytime I was going to install an update with BMM.
As soon as that problem is solved, I hope get back to BMM.
Only cm11 builds need little work to be bmm flashable. But every other rom works great at bmm... Gummy, slimkat, liquid, moke... So i disagree with u its only related to cm11.
how can i fix the cm11 zip file to be flashable with bmm?
fedegil69 said:
how can i fix the cm11 zip file to be flashable with bmm?
Click to expand...
Click to collapse
First post in CM11 thread!
Sent from my Razr XT910
fedegil69 said:
how can i fix the cm11 zip file to be flashable with bmm?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2535920
cm11 using bmm error
Will cm11 can ever install by using bmm?
Why error (status 6) occurre everytime?
siddhantmeshram510 said:
Will cm11 can ever install by using bmm?
Why error (status 6) occurre everytime?
Click to expand...
Click to collapse
Did you read everything in this thread?
Answer for you is above...
Sent from my Razr XT910
Related
Before reading, please note that this problem was resolved - of course thanks to those who helped with tips and tricks... Continue reading towards the end if you wish to know how to fix this issue if you encountered it.
Original message:
Hello folks,
I'm not exactly a total n00b but I've been a hardcore iPhone fan then entered the world of Android when I got my SGS2 a few months ago. I need some feedback here with flashing Cyanogenmod 7 or 9 (I WISH)
I have my At&t rooted with Zedomax kernel and Odin v1.85
Root functionality is all good, and "superuser" does everything I ask it to
Now, I had tried to flash the "Unnamed" Rom and it worked before... Then went bacl to stock (using the backup I had before)
Now... the problem is that getting Cyanogenmod (whether 7 or 9) has been a complete challenge, but I'm loving it and won't give up
I tried CM7 as well as CM9. Always get the error message below.
Please note that I had also tried everything alltogether while on the (Siyah-v2.6.11-att) which is great too. But same thing happens every time (below is the log)
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "galaxys2"
.........and this line repeats then same exact line except it mentions "GT-I9100" like twice (2 lines) and same line again but "GT-I9100M" and then "GT-I900T"
Then last line in the log is E:Error in /sdcard/update....(mentions full path of zip file) then (status 7)
Something that might help is that I (unfortunately) updated my phone when At&t released this minor update back in December/early January... So my firmware is "UCKK6"
What exactly is causing this error?? If "Unnamed Rom" worked fine, then why is Cyanogenmod being stubborn??
Thanks for any help... Would really appreciate it
sounds to me like you are trying to flash the WRONG cm7....you need the one made for the phone, found in the dev section
First you really should get rid of Zedomax kernel and keep using Siyah or Entropy.
The kernel you are using is way outdated and I am sure Entropy can give you a dozen reasons why not to use it.
Second do not try flashing CM9, cause you won't have a functional phone if you do.
When flashing CM7 did you try flashing it twice before rebooting?
Pirateghost said:
sounds to me like you are trying to flash the WRONG cm7....you need the one made for the phone, found in the dev section
Click to expand...
Click to collapse
Was about to mention that as well, beat me to it.
Thanks Pirateghost.
I got the rom from the Cyanogenmod website, and it's the only stable mod for AT&T SGS2. So it's the right rom/mod.
But as I'm typing I'm downloading the latest nightly for AT&T and will give it a shot.
LiLChris06 said:
First you really should get rid of Zedomax kernel and keep using Siyah or Entropy.
The kernel you are using is way outdated and I am sure Entropy can give you a dozen reasons why not to use it.
Second do not try flashing CM9, cause you won't have a functional phone if you do.
When flashing CM7 did you try flashing it twice before rebooting?
Was about to mention that as well, beat me to it.
Click to expand...
Click to collapse
@LilChris06
Thanks for the tips man
Just got rid of Zedomax lol... now back on Siyah, and will give Entropy a go later tonight.
TahrirSquare25 said:
Thanks Pirateghost.
I got the rom from the Cyanogenmod website, and it's the only stable mod for AT&T SGS2. So it's the right rom/mod.
But as I'm typing I'm downloading the latest nightly for AT&T and will give it a shot.
Click to expand...
Click to collapse
I hope your not getting this one - http://www.cyanogenmod.com/devices/samsung-galaxy-s2
That is more than likely for the i9100 version.
Grab this one - http://forum.xda-developers.com/showthread.php?t=1471365
Next time check the development forums before flashing things.
LiLChris06 said:
I hope your not getting this one - http://www.cyanogenmod.com/devices/samsung-galaxy-s2
That is more than likely for the i9100 version.
Grab this one - http://forum.xda-developers.com/showthread.php?t=1471365
Next time check the development forums before flashing things.
Click to expand...
Click to collapse
W0W!!! So those mods on the official Cyanogenmod website for SGS2 are ONLY for non-U.S. model!!!!!! Thanks a bunch man!!
I went ahead and got the latest nightly mod (02012012) but it came back with "Can't open /sdcard/..... (bad) installation aborted"
Will try my luck with earlier nightlies, perhaps this zip (02012012) is corrupt.
TahrirSquare25 said:
W0W!!! So those mods on the official Cyanogenmod website for SGS2 are ONLY for non-U.S. model!!!!!! Thanks a bunch man!!
I went ahead and got the latest nightly mod (02012012) but it came back with "Can't open /sdcard/..... (bad) installation aborted"
Will try my luck with earlier nightlies, perhaps this zip (02012012) is corrupt.
Click to expand...
Click to collapse
i also had the same issue
To flasb CM7 and NOT get the get.prop error( which you will get coming from the siyah kernel and trying to update/or install CM7) download this kernel reverter/kernel cleaner http://db.tt/s6xToyVV MAKE SURE to put this kernelreverter/cleaner on your internal sdcard along with this newest build fojnd here of a CM7 KANG build https://s3.amazonaws.com/cyanogenmodbuild.s3.mortimer.me.uk/index.html
Then boot to recovery, choose the kernel reverter.zip and flash it, before rebooting then choose the newest updated nightly kang build and flash it, then reboot phone. Yoh should NO LONGER have an issue. ALSO MAKE SURE TO FLASH GAPPS if you want the market and other google apps like gmail etc.
Next if you want you can then reinstall siyah kernel over on top of the cm7 build. When you go to flash a NEWER nightly update then AGAIN flash the kernel reverter/cleaner then the newer update. If you are on the siyah kernel you will get the get.prop error if you DON'T flash the kernel reverter first.
Sent From My KickAss ATT SGS2 SPORTING CM7
THANKS A LOT RockRatt
For the tip, as well as the excellent tool "kernel reverter/cleaner"
It took care of the error, and installation went well.
Afterwards I was stuck with the CM7 boot loop, but searched and found a quick fix that took care of it - wiping /data once more after the actual install.
CM7 up and intact
Now, I will play around with tweaks and themes.
Can't wait for the first stable CM9 mod for i777.
I'm currently running SHOStock ICS ROM and I want to change it, but every time I try to flash the CM9 ROM in recovery mode, I get an error-
Installation aborted (Status 7). The first time it happened was after I installed the shostock rom (I had the cm9 before and had no problems installing it).
I tried to update CWM through ROM Manager, but it didn't solve the problem.
What can I do to fix it? I searched the forum but didn't find a solution..
Im not sure exactly how to fix that but I've always read that we should avoid Rom Manager on the i777. You might want to sheck the threads about Rom manager errors. I've flashed every rom out there and never used rom manager and never had any problems.
I used rom manager only to update CWM. I haven't installed any rom with rom manager.
last time i found that error with CM9 was because of the build.prop issue. Our phones run i9100 based ROM's alot, there's a line in the updaterscript that looks for phone model, must remove that **** outta there.
And i must say that CM9 sucks if they still have not addressed this well known issue.
Just flash AOKP.
O and, un install ROM manager, its for idiots.
Does this ROM fully support hebrew? (including menus)
yaniv156 said:
Does this ROM fully support hebrew? (including menus)
Click to expand...
Click to collapse
What ROM?
mattdm said:
What ROM?
Click to expand...
Click to collapse
the AOKP
yaniv156 said:
the AOKP
Click to expand...
Click to collapse
Good question. I would say go ask in the AOKP thread, but you don't have enough posts to do that yet...I'll go ask for you. You can just go read the replies to my post.
Problem solved. I flashed AOKP and it worked (no error) ,but after that I flashed CM9 back (more comfortable for me), works perfect. Thanks for the help.
hello
i tried 2/3 times to flash the vanilla rootbox rom (can be found here: http://forum.xda-developers.com/showthread.php?t=1806401) on my SGS 2 I9100 but it stopped with an error in cwm but i don't understood.
i come from this rom http://forum.xda-developers.com/showthread.php?t=1847600
i flashed an official samsung rom 2.3.5 and then tried again with the rootbox but it says in cwm "signature verification failed" or something like that
i follow the steps of flashing, i wipe all data but always the same result.
it's not my first flash, i normerly know what to do if they are some bugs but this time no, so i ask in this section for help because i can't post a reply in devellopement section
(and sorry for my bad english ! ) thank you
astral34160 said:
hello
i tried 2/3 times to flash the vanilla rootbox rom (can be found here: http://forum.xda-developers.com/showthread.php?t=1806401) on my SGS 2 I9100 but it stopped with an error in cwm but i don't understood.
i come from this rom http://forum.xda-developers.com/showthread.php?t=1847600
i flashed an official samsung rom 2.3.5 and then tried again with the rootbox but it says in cwm "signature verification failed" or something like that
i follow the steps of flashing, i wipe all data but always the same result.
it's not my first flash, i normerly know what to do if they are some bugs but this time no, so i ask in this section for help because i can't post a reply in devellopement section
(and sorry for my bad english ! ) thank you
Click to expand...
Click to collapse
Signature Verification failure usually occurs when cwm encounters unsigned packages, you can install the package by disabling signature check option in cwm after selecting install zip option.
Sent from my GT-I9100 using xda app-developers app
i flashed cwm v5 and then my rom, it operate thank you !
Hello,
Currently I'm running CM 10.2 with 3.4.10-CM-gbce7128 kernel. I'm interested in crpalmer kernel as I have read some very good things about it. However, I'm kind of a noob.
Where can I download crpalmer? Can I flash it without wiping and reloading CM 10.2?
Thanks for your help!
There is a thread in the original android develop. by crpalmer. You download it there, then boot into recovery, wipe cache and dalvik, then flash the kernel and profit.
Sent from my DLX using xda app-developers app
Awesome! So I don't need to reflash CM 10.2?
JWings said:
Awesome! So I don't need to reflash CM 10.2?
Click to expand...
Click to collapse
No you do not need to reflash CM10.2
If you do then you will overwrite the kernel.
Sent from my Droid DNA on 4.3!!!
JWings said:
Awesome! So I don't need to reflash CM 10.2?
Click to expand...
Click to collapse
you're gonna need to reflash crpalmer's kernel after every time you flash a ROM.
Has anyone had any issues flashing crpalmer with CWM?
I keep getting..
Finding update package...
Opening update package...
Installing update...
Installation aborted.
I appreciate all suggestions.
Thanks!
JWings said:
Has anyone had any issues flashing crpalmer with CWM?
I keep getting..
Finding update package...
Opening update package...
Installing update...
Installation aborted.
I appreciate all suggestions.
Thanks!
Click to expand...
Click to collapse
Maybe a partial download? Try downloading it again...
I see what I did...
I downloaded the original v1.0. I loaded the latest v4.7.4 however I don't notice any difference. From what I read, there is supposed to be all kinds of new customization options that I didn't have before.
PS - It is awesome that crpalmer himself is helping me!
Thanks!
Hi,
Can anybody let me know on how to downgrade my GT-I9100G device from CM11 to CM10.2 ?.
I upgraded to CM11 unofficial build, but then found lots of bugs and so want to revert back to CM10.2
Thanks.
srchandran_72 said:
Hi,
Can anybody let me know on how to downgrade my GT-I9100G device from CM11 to CM10.2 ?.
I upgraded to CM11 unofficial build, but then found lots of bugs and so want to revert back to CM10.2
Thanks.
Click to expand...
Click to collapse
just flash the cm10.2 build if you've root n have installed cwm,
nasheich said:
just flash the cm10.2 build if you've root n have installed cwm,
Click to expand...
Click to collapse
Thanks, doesn't seem like it was so simple. I had tried that many a times before posting this on to the forum. When I try to install CM10.2 again through CWM, it errors out with (Status 7) error. I did a Wipe/Factory Data Reset, Wipe Dalvik Cache and format system. Tried again but the same error re-appeared (status 7).
So I had to reinstall CM11 and GAPPS for CM11 again to make the phone work with some old bugs again . Camera not working, lag in screen rotation, stock browser not working etc.,
Thanks
srchandran_72 said:
Thanks, doesn't seem like it was so simple. I had tried that many a times before posting this on to the forum. When I try to install CM10.2 again through CWM, it errors out with (Status 7) error. I did a Wipe/Factory Data Reset, Wipe Dalvik Cache and format system. Tried again but the same error re-appeared (status 7).
So I had to reinstall CM11 and GAPPS for CM11 again to make the phone work with some old bugs again . Camera not working, lag in screen rotation, stock browser not working etc.,
Thanks
Click to expand...
Click to collapse
status 7 it's cause there's something wrong on the updater script in the Rom build, check the Rom Thread that you've download
nasheich said:
status 7 it's cause there's something wrong on the updater script in the Rom build, check the Rom Thread that you've download
Click to expand...
Click to collapse
Thanks, not sure on what the issue with the Rom could be. I have rooted the device and then installed Blazing Kernel V3 with CWM 6.
Before I decided to upgrade my phone to experimental CM11, I used to apply all CM10.2 Nightlies without any issues.
I have tried to install even CM10.1 stable release through CWM v.6 and the same error comes up.
Further, I have always downloaded ROM's from download.cyanogenmod.org/?device=i9100g or through the CMupdater in the phone.
Can you please let me know, what version of Blazing Kernel should I using on GT-i9100G and how do I flash it safely without fearing of the "Sleep of death" happening.
Thank you.
srchandran_72 said:
Thanks, not sure on what the issue with the Rom could be. I have rooted the device and then installed Blazing Kernel V3 with CWM 6.
Before I decided to upgrade my phone to experimental CM11, I used to apply all CM10.2 Nightlies without any issues.
I have tried to install even CM10.1 stable release through CWM v.6 and the same error comes up.
Further, I have always downloaded ROM's from download.cyanogenmod.org/?device=i9100g or through the CMupdater in the phone.
Can you please let me know, what version of Blazing Kernel should I using on GT-i9100G and how do I flash it safely without fearing of the "Sleep of death" happening.
Thank you.
Click to expand...
Click to collapse
I never use Gallaxy SII, dont know much about it
but, you can learn about your device by going to the SII thread, you'll find out more on there
nasheich said:
I never use Gallaxy SII, dont know much about it
but, you can learn about your device by going to the SII thread, you'll find out more on there
Click to expand...
Click to collapse
Thanks, can you please let me know the link to the GT-i1900G thread and also, on how can "post" a new question in the thread.
srchandran_72 said:
Thanks, can you please let me know the link to the GT-i1900G thread and also, on how can "post" a new question in the thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s2
that should be the thread for your device
and for posting in a thread(speciallly in the dev thread), you must at least have more than 10 posting in whole xda thread
in general thread, you can post even you didn't have 10+ posting
please read the Rules of Xda for more detail about posting and everything