Ive researched and researched and I think its time I finally just post and get some advice. I odined powerwash + atlas to my SCH-I500, booted up, shut down and went back to download mode, odined CWM recovery fix for cm7, then reset and odined GB Bootloaders.
I can successfully flash to teamhacksung ics, then to cm10, but from here, im stuck. When I try to flash ANY roms, I get an installation aborted and status 7 error or status 0 error. I tried the status 7 error fix, which didnt help. I tried using TWRP 2.5 with the devil kernel, which didnt help. No matter what I do, I cant seem to get this down.
Eventually I end up soft bricking it and having to drive all the way back to my office to use Odin to go back to stock. Ive tried just about everything I can for 2 weeks straight. What am I doing wrong? Thanks in advance for anyone who can help.
Sounds like you are following Section 2 of Droidstyles Guide or perhaps some other guide? You need to be jumping straight to section 4 of his guide if your flashing to CM10 and beyond. No need to mess with THS, & I would recommend using EHO3 instead of Powerwash when you odin back to GB. I don't see any reason the way you are doing it shouldn't work, but it's always a good idea to remove any unnecessary variables from the equation and hope that works better. Let us know...
Related
Tried to flash a custom ROM for the 15th time or so, with the same result. E: Can't Symlink /system/bin/su
Failure at line 16
Have researched this error, thought I had it figured out. Obviously not. Feel like an idiot. I never had any problems loading custom ROM's on 2.1.
BTW, I am rooted thru S1Click, have backed up thru nandroid and Titanium, have installed 3e custom recovery, everything I have read I could be doing wrong I have changed. I have tried different makers- Bionix, Axura, Eugene, all with hte same errors, so I know it's not just the ROM file.
What am I doing wrong here?
I don't know.. but let's save everyone the trouble of answering this and let you odin back to stock.
It might be something you flashed etc..
tried that too. tried loading these ROM's right after rooting and adding ROM manager. It's just weird that know one can answer a specific problem like "failure at line 16". Surprised there isn't an answer to look up based on the Line 16 error.
I'm not pointing any fingers, because I don't know the answer either. Just know that if you you give me one of the basic replies, like try ODIN to stock, I've probably tried it.
What are you odining to? I've always had success going to back to jfd. Doesn't seem to be any issues with rooting or rom manager.
Trigger + Overstock = Awesomeness
yep. Odining to jfd.
One thing is that I always install 2.2 via mini-kies before attempting to install custom ROM. Reason being that for whatever reason, the super one click just does not want to install on 2.1. Could that be part of the problem?
Here's what I do and it works every time for me.
1. Odin to jfd
2. Root then install rom manager
3. Flash clockwork recovery
4. Download rom of choice to internal sd
5. Flash rom thru clockwork
6. Enjoy
That has never failed me.
Trigger + Overstock = Awesomeness
Check This Out....Tell me If It Helped You
http://forum.xda-developers.com/showthread.php?t=848737
I did it. FINALLY.
Loaded Simply Honey 2.5, and this thing is FAST and awesome. Such a cool ROM. I was so pumped when it actually worked. Thanks for all the help, guys. And all the great developers that put in hte time and work to make our phones what they should be. Good job, guys.
Glad you got it working. The first flash is pretty awesome.
Trigger + Overstock = Awesomeness
I had this happening yesterday, find and Odin Eugene's froyo that doesn't brick, followed by a stock Odin flash with checking repartition the second time to fully clear the problem, or it will happen again probably the next time you go to flash a rom.
Sent from my Loki powered Vibrant via the XDA App
Br1cK'd said:
I had this happening yesterday, find and Odin Eugene's froyo that doesn't brick, followed by a stock Odin flash with checking repartition the second time to fully clear the problem, or it will happen again probably the next time you go to flash a rom.
Sent from my Loki powered Vibrant via the XDA App
Click to expand...
Click to collapse
This is the safest way and the best way.
Hey all. I've been running a rooted fascinate lately. Yesterday I tried installing Cyanogenmod 6.2 beta from jt, and had no luck. I flashed back to dl09 using one of the all-in-one odin files. Now today I tried different flashing routines in another attempt to get CM6 working, but to no avail. Now my phone will no longer boot past the Verizon logo. It goes to an all-black screen, and the capacitive buttons at the bottom light up, but other than that it is completely non-functional. Is there anything I can do? I've tried odin'ing just about everything other than the stock di01 files. Any help is greatly appreciated!
Ahodson1985 said:
Hey all. I've been running a rooted fascinate lately. Yesterday I tried installing Cyanogenmod 6.2 beta from jt, and had no luck. I flashed back to dl09 using one of the all-in-one odin files. Now today I tried different flashing routines in another attempt to get CM6 working, but to no avail. Now my phone will no longer boot past the Verizon logo. It goes to an all-black screen, and the capacitive buttons at the bottom light up, but other than that it is completely non-functional. Is there anything I can do? I've tried odin'ing just about everything other than the stock di01 files. Any help is greatly appreciated!
Click to expand...
Click to collapse
Details, details, details please. The more info, the easier it is for everyone here to help. What other flashing routines did you try? Please give details on each of those so everyone has an idea of what has been done. Thanks.
Okay, apparently the last flash I did, something didn't quite take. Don't know if it didn't completely format the data partition after booting when odin was done. I flashed again and it's back to normal. I was really worried for a second that maybe I over-odin'ed my phone. Thanks anyways!
it happens sometimes, the only thing ive found that works is just re flashing it to stock or some other ROM that wipes data when it installs.
Hey All,
I've been looking for an answer for over a day now, but can't seem to find anything about my specific problem. Here's what happened:
I had flashed to ICS 4.0.3 on my Samsung Vibrant about a month ago and everything was working great until yesterday when I woke up to find the "Encryption Unsuccessful" screen on my phone. I did a little research to find out that there is a fix to this and to NOT reset the phone. So, I took the steps to ODIN the phone back to Stock Eclair in hopes that starting from the beginning again would be easiest way to fix the problem. The ODIN process finished completely fine (PASSED), but now when it reboots, I only get to the first "Vibrant" screen, then it shows the battery and spinning circle icon. Apparently it won't fully reboot. I've tried to ODIN it back to stock several times, and I keep getting the same results. I can get it into download mode and plugged into my computer, but that's about it.
From the posts I've read, it sounds like my phone might still be okay to recover since it does power up, but I can't seem to find a solution to get it fully back up and running.
Any help/recommendations would be greatly appreciated!
Thanks in advance!
Maybe your JFD file is corruption. Check with your MD5 sum if there any error or mismatch.. Just give you an idea.BTW what Odin are u using. I recommend Odin 1.7 I stay away the older Odin or the newer Odin
You are screwed.
Sorry to tell you this but i had the exact same problem and found no solution whatsoever to fix the phone. I finally gave up and bought a Galaxy Nexus. You can try flashing Eugene's Unbrickable Froyo Rom which is flashable through odin as a .tar package along with the pit file. You might be able to fix it but i highly doubt it. I flashed Eugene's rom and got the same results as you described. By any chance did you click "Reset Phone" when the "Encryption Unsuccessful" showed up? If so well yeah your phone is pretty much paperweight as of now...until someone finds a solution. Like you i am also able to access download mode. So i guess there may be a way to fix your phone. Not saying it's impossible...hopefully someone finds a solution soon.
Here is the link to Euguene's rom: http://eb-productions.proboards.com/index.cgi?board=samsungsgs&action=display&thread=8
Good luck.
OP, what ROM were you running (specifically. Not just ICS 4.0.3-what is the name of the ROM)? Also what kernel?
Since you are not the only one this happened to, I would like to know the above and see if it correlates to the others that this happened to in the Vibrant section. I'll post the same in their threads too.
Check here out for a possible solution/workaround.
Replacement Vibrant Coming
Thanks for your recommendations/help guys.
I decided to go to T-Mobile and complain and they are sending me a replacement phone. Apparently it's still under warranty, so it won't cost me anything, and if my data is lost, then so be it...at least all my contacts will still be in tact through my Google account.
Merio - I did NOT hit the Reset Button when I saw the Encryption Unsuccessful screen. Before doing anything I did a little research and I found a forum here on xda that said to not hit that button, and tried to explain a way to fix it using the Heimdall One-Click. Basically it sounded like I'd be flashing back to a Gingerbread ROM. So, instead I just went ahead and tried to flash back to stock Eclair. The results of that were obviously not good.
Woodrube - I was running the Passion 13 ROM (ICS 4.0.3). Was really enjoying it until I got the Encryption "Screen of Death"
I don't know what Kernel it was, actually, I don't really know what a Kernel is...
Thanks again guys. Hopefully I'll be up and running on my replacement phone soon!
Now I know this question, in general, has been asked a lot. I've literally searched and tried the solutions in other threads, but this phone might be beyond help. I just want to know if someone has another solution as to how to revive this phone. I honestly think my situation is different than most....I downloaded and installed Team Hacksung's ICS 4.0.3 Build 6.1 ROM and I was using it just fine for a couple of months. Everything was working the whole time. Today, I am browsing through my local news station's app and my phone freezes on me! I pulled the battery and restarted the phone. It boots up fine and gets to the startup screen with the time and the screen lock. I did notice right away that the digitizer screen was not responding to my touch because I could not slide my lock over to get into my phone. I tried a few more soft resets and still nothing. I did notice, however, that the soft keys at the bottom did respond to my touch and they blinked and provided haptic feedback, so at this point I'm thinking it shouldn't be a problem with my digitizer. So I took the battery out then put the phone into recovery and wiped data, cache and dalvik. Then I rebooted the phone once again and still no response to touch at the home/lock screen. I then proceeded to try to reflash the same ICS ROM all over again and that's where the problem started. I can get into download mode and I've already tried to load stock froyo and stock gingerbread, but nothing works. My phone will not go past the "Samsung" boot-up screen. I've already tried several other forums' threads on how to recover a bricked Fascinate, but no matter what I try to load with Odin, Heimdall or anything else, my phone won't load past the Samsung screen. I can get into Download mode and that's it. My phone will not go into recovery using the 3-finger method. When I run odin I get a success message each time. I've even tried to heimdall the files individually and even tried to reload the stock kernel. The other problem I am running into is a lot of the links on these sites are all broken so I am unable to get the files I need. Has anyone else ever had this problem?
Edit: P.S. When the phone is off and on the charger, the grey battery shows the "loading" circle (whatever you call it) in the middle of it, but never converts to showing the green bars moving up and down indicating the battery is being charged. The loading circle is also frozen and does not spin.
im dizzy after reading a few sentences lol...check out my guide in the general section.
droidstyle said:
im dizzy after reading a few sentences lol...check out my guide in the general section.
Click to expand...
Click to collapse
Are you referring to http://forum.xda-developers.com/showthread.php?t=1238070?
If so, I just did it and it won't go past "Samsung."
Did you do check repartition and use the atlas pit file? That would be key, I believe, in returning you properly to stock.
Droidstyle's guide has all the working links you'll ever need.
http://forum.xda-developers.com/showthread.php?t=1238070
jawman27 said:
Did you do check repartition and use the atlas pit file? That would be key, I believe, in returning you properly to stock.
Droidstyle's guide has all the working links you'll ever need.
http://forum.xda-developers.com/showthread.php?t=1238070
Click to expand...
Click to collapse
I did check re-partition and yes I did load the atlas pit file. Still nothing.
e
So you tried heimdall? What commands did you do? and what rom?
also which links were dead that you needed?
mvmacd said:
So you tried heimdall? What commands did you do? and what rom?
also which links were dead that you needed?
Click to expand...
Click to collapse
I used heimdall front end to load DI01 files, I didn't use any commands. Also, I was just referring to "Unbrick your samsung fascinate" threads on other websites. A lot of the links I found were outdated or broken.
yea unfortunately not many guides have working links these days...Mine is about the only one left that is kept up to date. Im very suprised a full odin session did not fix your issues. One thing left to try is to odin a older stock package like DL09
Found here:
http://forum.xda-developers.com/showthread.php?t=1526488
Just tried pushing the DL09 file in odin AND in heimdall and neither worked. I still get stuck on the "Samsung" boot and it goes no further. Can't even get into recovery....
I think I truly have a brick...
kinna long shot
but why not try a different PC and a new or different cable.
believe me a faulty cable did me in, a week back and i was sure at the time that my phone is gone, but then it wasn't as bad as the impression i am getting from your description.
all the best with this , and hoping that something solves this issue.
god bless
haoleflip said:
Now I know this question, in general, has been asked a lot. I've literally searched and tried the solutions in other threads, but this phone might be beyond help. I just want to know if someone has another solution as to how to revive this phone. I honestly think my situation is different than most....I downloaded and installed Team Hacksung's ICS 4.0.3 Build 6.1 ROM and I was using it just fine for a couple of months.....
Click to expand...
Click to collapse
I am having a similiar problem now. I was able to odin an older CWM (3.0 blue I got somewhere). From there I mounted usb and loaded ext4_formatter_all.zip. I ran this script and odin'd dh03 and finally got back to stock. That's where I am now.
Hope this helps
kduffman said:
I am having a similiar problem now. I was able to odin an older CWM (3.0 blue I got somewhere). From there I mounted usb and loaded ext4_formatter_all.zip. I ran this script and odin'd dh03 and finally got back to stock. That's where I am now.
Hope this helps
Click to expand...
Click to collapse
I have a blue recovery [3.x, voodoo], here it is if the OP wishes to try it.
[Use Heimdall and select recovery]
cwm3_voodoo-blue.bin http://www.mediafire.com/?4ls06x8gha88vtp
cwm4-bml-i500-fascinate.bin http://www.mediafire.com/?2ny1ql66yh69bn3
35c31418dbe9a9db70de954cdf7369ef cwm3_voodoo-blue.bin
05f3e376ca697fd0fb8700dea05254aa cwm4-bml-i500-fascinate.bin
I threw in an extra 4.x cwm for good measure, lol. [I saved these in a folder in case I ever needed them..I was going to delete the folder since I upgraded to THS ICS rom (build 7.1), but I decided not to delete them for some reason]
it seems OP sounds like he knows what he is talking about, but lets start simple.
Have you tried going all the way back to 100% stock?
In droidstlyes FANTASTIC guide
do section 5, perhaps try with out repartition or the atlas....that has worked for me in the past.
I know on my THS ICS 7.1 build i had a "sleep of death" (wouldnt wake up) and i was lazy and did the 3 finger salute and it would ONLY boot into CWM. a battery pop would have been fine but like i said i was lazy. i had to Odin back to stock in order to re-flash everything. [luckily i had a nandroid from a few days earlier]
Good Luck
Edit: I have never seen or heard of a fassy that CAN get into Download mode and not be recovered to 100% functional.
I'm just thinking out loud here, but here are two things to consider. Perhaps the senior members will comment.
1. Have you considered flashing a different bootloader?
2. Is it possible you have a corrupt stock and/or pit file? Have you tried re-downloading them and giving it another go?
OP, can you post the md5sums of the files, along with the filenames that you are using in Odin/Heimdall?
thanks
Well, I ended up getting a droid bionic from a friend, so I will turn this fassy into a project phone. If I can get it to work I will sell it or keep it for backup. Anyway...
I have not tried the older blue recovery yet. I will try that when I get back to my computer. It seems like I've gone beyond anything I've ever had to try with this phone. I read on one thread that if odin did not work, keep trying heimdall over and over until the phone boots up. I must have tried at least 8 times on one run. It still won't go past samsung screen. I can get into download just fine. No matter how many different cwms I try, I can't get into recovery using the three finger method. Im pretty knowledgeable when it comes to this stuff and I didn't flash the wrong rom or kernel or anything like that. I was running smoothly on an ics rom until my phone froze. I did have it overclocked with ns tools, but not at the time the phone froze. I honestly don't think its hardware related, but merely a glitch in the software or a bad kernel that does not want to come out? I have no clue....help me revive this baby lol...
Sent from my DROID BIONIC using Tapatalk
jawman27 said:
I'm just thinking out loud here, but here are two things to consider. Perhaps the senior members will comment.
1. Have you considered flashing a different bootloader?
2. Is it possible you have a corrupt stock and/or pit file? Have you tried re-downloading them and giving it another go?
Click to expand...
Click to collapse
I've tried different pit files from different threads. Even the one from droidstyle's thread. I've also tried different versions of the following stock files from different "known" and trusted sites: DI01, DL09, ED01, EB01, EH03, CM7, CM9 other ICS roms and different kernels that suit each both voodoo and non voodoo. And excuse my newbness on the terms, but what do you mean by flashing a new bootloader?
Sent from my DROID BIONIC using Tapatalk
haoleflip said:
... but what do you mean by flashing a new bootloader?
Sent from my DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
Bootloaders can be flashed in Odin the same way a ROM can. A bootloader is the rudimentary software that gets the other software up and running. When Glitch's kernel started requiring Gingerbread bootloaders for complete functionality, a lot of us realized that just having GB didn't mean you had GB bootloaders.
http://www.mediafire.com/?fqojvsynkff93hc
Hopefully this link will work. It's certainly worth a try. It doesn't seem like you have much to lose. I'd recommend flashing it the exact same way you do a ROM. There's a bootloader section in Odin, but most people avoid it. Good luck.
Hello,
I have tried to flash, reflash, and flash again back to the stock froyo for samsung fascinate. I had cm7 on my phone for about 2 years and decided to go to cm10. Well I couldnt get gapps to work in cm10 so I thought that I would take it back to cm9. cm9 gave me the same issues so i decided to just go back to cm7. At this point I couldnt go into CWM and the phone would go straight to the cm9 alien guy and would proceed to do an infinite boot. I decided to try and reload CWM and it worked. The issue now is that I cannot reflash the phone. I have tried http://forum.xda-developers.com/showthread.php?t=1212239 which keeps giving me the 0 succeeded/0 failed message. I am assuming that it is refusing to reflash. I have also tried flashing from the CWM with a file on the sd card. How do i proceed? Also this is my first post, been reading for years. Thanks!
Edit: When I try and clear /cache it is giving me a failed to mount /cache
Not sure where you went wrong here, but use Droidstyle's guide to flash back to stock (btw it's stock GB not Froyo). CM10 is great but I'd recommend trying AOKP JB Sep. 20 with the Devil 1.5.2 Kernel. Smooth as hell.
Grab the proper working and latest Gapps from http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
odin cant see phone
Crawshayi said:
Not sure where you went wrong here, but use Droidstyle's guide to flash back to stock (btw it's stock GB not Froyo). CM10 is great but I'd recommend trying AOKP JB Sep. 20 with the Devil 1.5.2 Kernel. Smooth as hell.
Grab the proper working and latest Gapps from http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
Click to expand...
Click to collapse
Well it seems as though odin cannot see my phone. Heimdall sees it but odin does not. I think that may be the reason that I am getting 0 succeeded/ 0 failed.
There can be many reasons that happens, but usually it's a bad cable or usb port. Try different usb ports first, even on a different computer if you can, and also a different data cable if you have one lying around. Also, uninstall and reinstall the Samsung usb drivers. Sometimes that helps.