While trying to flash my o1 with 2.2 rom with kdz i got this msg.
17:28:13 : Launching SW update
17:28:13 : Unpacking KDZ
17:29:02 : KDZ file extraced
17:30:43 : Files were extracted.
17:30:43 : LGMobileDL Load.
17:30:43 : Port = 3
17:30:43 : Connecting to phone
17:30:48 : PHONE WAS NOT FOUND!
17:30:50 : ===FINISHED===
What could be the reason? please sum1 help. i removed the sd card before flashing.
Could it be the problem?
Sorry the phone flashed after i turned usb debugging on. After flashing it showed Emergency mode for 5 minutes but did not reboot as it is supposed to. So i removed the battery and then switched on the phone but to my surprise nothing happened. it was the same 2.2.1.
What to do now?
I am desperate to root but a little anxious. Please Help
USB 1.1 is nt install i blv
sorry but couldn't understand what you wrote. pease elaborate
Boot your phone into emergency mode, connect the usb cable, then flash the rom. Remember to disable LG modem as listed here to prevent bricking.
How to boot in emergency mode
Return+power +volume up
Sent from my LG-P500 using XDA App
Hello everyone
I purchased LG Optimus LTE2, F160L. I was trying to install ROM but as it rebooted it stuck on screen saying "LG Security Error"?
How can I fix this error?
any help!
Thanks
100% Solved
veer.developer said:
Hello everyone
I purchased LG Optimus LTE2, F160L. I was trying to install ROM but as it rebooted it stuck on screen saying "LG Security Error"?
How can I fix this error?
any help!
Thanks
Click to expand...
Click to collapse
download attached file, there you can find two links for
1. Download KDZ
2. Download Attached ZIP file
1) Download the latest KDZ for your phone
check link in attached file
2) Make sure you have LG United Drivers already installed, otherwise download from below
*LGUnitedMobileDriver file in attached zip
3) Download LG KDZ Updater
KDZ_FW_UPD_EN folder in zip
4) Download the manual adb wipe batch file
wipe in attached zip
5) Put your Optimus into Download Mode by switching it off, attaching the usb cable to the phone, holding both the up and down volume buttons at the same time and lastly inserting the usb cable into the computer; wait for the drivers to finish loading if doing it for the first time.
6) run KDZ_FW_UPD.exe. Use the settings below
Type: 3GQCT
Phone Mode: CS_Emergency
KDZ file: navigate to the folder which you have saved the downloaded KDZ from the step (1)
Click Launch Software Update and wait for the flash process to finish
7) Your phone will restart itself when IParam = 90 is displayed and proceed slower until you see IParam=1 again (which signals the end of flash, you can safely exit the program then and remove the cable from the phone). If phone boots up normally, congrats, skip the steps below and proceed to use the phone as per normal.
However, this most probably will not be the case for newer Optimus-es, as the data partition somehow wasn't wiped even when KDZ-ed, remaining 'dirty', thus causing bootloop or security infringement.
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Hope with this simple guide fellow members will feel safer when rooting or removing non essential LG wares from their Optimus.
and tell me if you got any good rom for lg lte2?
and tell me if you got any good rom for lg lte2?[/QUOTE]
Sling 1.5.3 on lgviet.com
more stable and reliable rom
http://lgviet.com/forum/threads/lte2-sling-v1-5-3-v1-6-nhieu-chuc-nang-la-cho-lte2.1325/
mine stuck at u+ lte logo any suggestion i tried kdz v20g and v20f but no luck and also tried the wipe option
I can't enable Download Mode on F160L
I did the following
Switched it off
Connected the USB cable to phone
Hold down Volume UP and Volume DOWN at the same time
Inserted the other side of the USB cable to PC with without releasing the Volume buttons
It just showed me blue battery, indicating that the phone is now charging.
Which part I did wrong?
right way
inspir3 said:
I can't enable Download Mode on F160L
I did the following
Switched it off
Connected the USB cable to phone
Hold down Volume UP and Volume DOWN at the same time
Inserted the other side of the USB cable to PC with without releasing the Volume buttons
It just showed me blue battery, indicating that the phone is now charging.
Which part I did wrong?
Click to expand...
Click to collapse
you did it wrong Hold down Volume UP and Volume DOWN at the same time first and then connect the cable until it goes into download mode.
androidlabs said:
you did it wrong Hold down Volume UP and Volume DOWN at the same time first and then connect the cable until it goes into download mode.
Click to expand...
Click to collapse
that's exactly what I did. I held down Volume UP and Volume DOWN at the same time and then connected yhr cable, but then it shows as charging, not download mode
inspir3 said:
that's exactly what I did. I held down Volume UP and Volume DOWN at the same time and then connected yhr cable, but then it shows as charging, not download mode
Click to expand...
Click to collapse
My phone is also not going into recovery or download mode anymore
Murshad007 said:
My phone is also not going into recovery or download mode anymore
Click to expand...
Click to collapse
what did you do beforehand?
inspir3 said:
what did you do beforehand?
Click to expand...
Click to collapse
My phone is asking for some code in Korean.. I tried to flash through KDZ but it gave some Lparam and Sparam error..
Now I can't go in Recovery or download Mode either... I have tried all key combinations... One by one several times...
My phone only show this after boot..
Sent from My LG Optimus G F180L Sling 2.2.2 stock 4.4.2 rooted
Bundle of thanks
@luvlymani
Thanks man for this awesome thread. I flashed an android 4.3.1 rom on my LG LTE 2 and it turned out to be sh*t... made me worry a lot. It didn't allow me to connect to wifi neither did it detect my sd card. It didn't let me boot into recovery either... I was so damn frustrated.. I wasted continuous hours looking for a solution as Korean phones have little support and I finally found this thread. I have to say this is the BEST DAMN POST regarding the LTE 2 recovery from bad ROMS I have ever seen. You can measure my appreciation from the amount of words that I've typed.
Anyway, once again thanks a lot for sharing this BEAUTIFUL thread. Cheers and stay blessed !! :good: :good:
I tried to update the LG F160L with V20g_00.ZIP
The phone is at download mode and run KDZ_FW_UPD.exe
I got the error window popup :
Upgrade Error
Wparam:100
Lparam:5000
Please see the update.log below:
[R&D Test Tools Log File]
09:08:21 : Launching SW update
09:08:21 : Unpacking KDZ
09:08:26 : KDZ file extraced
09:08:36 : Files were extracted.
09:08:36 : LGMobileDL Load.
09:08:36 : Port = -1
09:08:36 : Connecting to phone
09:08:51 : Check Phone mode = 2
09:08:51 : Phone type check.......
09:08:52 : LGMobileDL.DLL Loading....
09:08:52 : _SetAuthMark Fail
09:08:53 : _SetAuthMark Ok : wAuthMark(65535)
09:08:53 : _DetachDLL Call
09:08:53 : _DetachDLL Call End
09:08:53 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGF160LAT-00-V20g-LGU-KR-NOV-26-2013+0_Develop.wdb
09:08:53 : Param : moduleDir =
09:08:53 : Param : waitTime = 0
09:08:53 : Param : UsbHighSpeed = 1
09:08:53 : Param : PhoneMode = 2
09:08:53 : Param : BinVersion = V20g_00 (1)
09:08:53 : Param : AuthMark = 65535
09:08:53 : Call fn_StartUpgrade
09:08:56 : 3GQCT : wParam = 13, lParam = 4
09:08:56 : Step Complete : DSP Write
09:08:59 : 3GQCT : wParam = 13, lParam = 5
09:08:59 : Step Complete : DSP Write
09:09:08 : 3GQCT : wParam = 13, lParam = 6
09:09:08 : Step Complete : DSP Write
09:09:15 : 3GQCT : wParam = 13, lParam = 7
09:09:15 : Step Complete : DSP Write
09:09:16 : 3GQCT : wParam = 2007, lParam = 0
09:09:16 : 3GQCT : wParam = 13, lParam = 8
09:09:16 : Step Complete : DSP Write
09:09:16 : 3GQCT : wParam = 2008, lParam = 5
09:09:17 : 3GQCT : wParam = 13, lParam = 10
09:09:17 : Step Complete : DSP Write
09:09:18 : 3GQCT : wParam = 20, lParam = 0
09:09:18 : 3GQCT : wParam = 100, lParam = 5000
09:09:18 : Step : Upgrade Error error code = 5000
09:09:18 : ResetStartInfo() Call
09:09:18 : _DetachDLL Call
09:09:18 : _DetachDLL Call End
09:09:18 : FreeLibrary Call
09:09:18 : FreeLibrary Call End
09:09:18 : ResetStartInfo() Call End
09:09:19 : ===FINISHED===
luvlymani said:
download attached file, there you can find two links for
1. Download KDZ
2. Download Attached ZIP file
1) Download the latest KDZ for your phone
check link in attached file
2) Make sure you have LG United Drivers already installed, otherwise download from below
*LGUnitedMobileDriver file in attached zip
3) Download LG KDZ Updater
KDZ_FW_UPD_EN folder in zip
4) Download the manual adb wipe batch file
wipe in attached zip
5) Put your Optimus into Download Mode by switching it off, attaching the usb cable to the phone, holding both the up and down volume buttons at the same time and lastly inserting the usb cable into the computer; wait for the drivers to finish loading if doing it for the first time.
6) run KDZ_FW_UPD.exe. Use the settings below
Type: 3GQCT
Phone Mode: CS_Emergency
KDZ file: navigate to the folder which you have saved the downloaded KDZ from the step (1)
Click Launch Software Update and wait for the flash process to finish
7) Your phone will restart itself when IParam = 90 is displayed and proceed slower until you see IParam=1 again (which signals the end of flash, you can safely exit the program then and remove the cable from the phone). If phone boots up normally, congrats, skip the steps below and proceed to use the phone as per normal.
However, this most probably will not be the case for newer Optimus-es, as the data partition somehow wasn't wiped even when KDZ-ed, remaining 'dirty', thus causing bootloop or security infringement.
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Hope with this simple guide fellow members will feel safer when rooting or removing non essential LG wares from their Optimus.
and tell me if you got any good rom for lg lte2?
Click to expand...
Click to collapse
i have same security error in my LG Optimus F160LV. i can read your post but cannot open your given files. it is downloading 515 bytes and there is two links but it is not opening. can you please write me every file name separately so i can download it from anywhere? pls help my set is off since 2 days!!!!
deshwani said:
i have same security error in my LG Optimus F160LV. i can read your post but cannot open your given files. it is downloading 515 bytes and there is two links but it is not opening. can you please write me every file name separately so i can download it from anywhere? pls help my set is off since 2 days!!!!
Click to expand...
Click to collapse
Actually Brother, i replied to this thread because i was unable to find a cure for such problem. Back then i dont have ability to post links, thats why i share 2 html files to open up links.... here you go
luvlymani said:
Actually Brother, i replied to this thread because i was unable to find a cure for such problem. Back then i dont have ability to post links, thats why i share 2 html files to open up links.... here you go
Click to expand...
Click to collapse
your 1 link which you sent me inbox is not opening, i think its kdz file. but i found its original kdz firmware file from some websites but its very heavy and about 1gb... its taking too too much time to download and i dont have reliable internet connection to download them... i think its taking some more time than others file which i easily download 500/600 mb's.... can you please help me some resources? which is easy for me... i am still stuck up with my phone!!!
luvlymani said:
Actually Brother, i replied to this thread because i was unable to find a cure for such problem. Back then i dont have ability to post links, thats why i share 2 html files to open up links.... here you go
Click to expand...
Click to collapse
finally i have installed kdz file and followed your process and my phone is unbricked... many many thanks for this helpful guide...
Lg l160l sms corian app keboard fix rom needed.
I search since three months but not fined any rom.
Plz xda developers made this rom with out any bug
Thanks
help me !!!
deshwani said:
finally i have installed kdz file and followed your process and my phone is unbricked... many many thanks for this helpful guide...
Click to expand...
Click to collapse
help me out please, I got this problem and I can not manage the place I read on this forum but I still give error. if anyone can help me remain grateful to them :good:
hELP!!!!!
My kdz updater jut gets unresponding at unpacking kdz......help plzzzz obile stuck at lg logo
Hi everybody. I have a F160LV model and I'm stuck on "LG Security Error". My problem is taht I can't go on download mode. I've tried all button combination described above (vol. up + down + plug USB / remove battery, vol up+down+ plug USB + put battery...) but every time, the phone's just booting and stuck again on "LG Security Error".
I can only boot to "LG Service mode".
I tried command via adb (adb reboot download, adb reboot-bootloader) but same thing, phone booting and stuck on "LG Security Error".
I tried adb reboot recovery, it just do hard reset but don't solve the problem.
So does anyone can give me more ideas? What should I do? Is there another way to boot in download mode? Or is it possible to flash via adb?
Thank's for your help guys.
If flashed LG G2 D802 rom on D800/similar OR no recovery, no download, no fastboot OR errors like:
Lg g2 "cross dll" or "device model different" or "fota/laf partion changed" while flashing,
please follow :(Thanks to aftabalam8c2)
http://forum.xda-developers.com/lg-g2/general/lg-g2-cross-dll-device-model-fota-laf-t3003717
also if no download mode, no recovery mode, no fastboot mode follow this:(Thanks to Partager.info)
http://forum.xda-developers.com/showthread.php?t=2582142
if no success, please follow qhsub_bulk mode(its a bit tricky but possible, i did it myself after trying all above):(Thanks to tungkick)
http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627
to get into qhsub_bulk mode: (thanks to Aftab Alam)
remove battery connection inside the mobile, keep usb cable pugged from lg g2 to your windows pc and watch this video
https://www.youtube.com/watch?v=FiofVOqfnxw
helpful video, how to remove logic board(its not require to remove full logic board, just for reference): (Thanks to Paul W)
https://www.youtube.com/watch?v=O12UJMOCx1w
hope your phone comes back to life...
I don't want any donations, just wanted to help, as i spend so many days and nights to bring my phone back to life, after lots of research i am sharing all at one place so you guys can save your time.
Thanks and regards
Abhishek Sharma
Helppp meeee pleaseeee...!!
Hi bro, i was trying to upgrade my firmware via LG PC Suite and it upgraded my firmware to
D80220C on my LG_LS980 now im stuck at LG boot screen ( light keeps blinking ), cant do anything, pleaseeeeeeeeeeee help ASAP!!!
At the back cover it says LS 980 but the phone was showing it as D 802 ( firmware D80220b ) ABOUT PHONE ( im sure its a refurbished set / had no idea before ) , before upgrading it had D80220C , D80220b was installed on it , any solution [ STUCK AT LG LOGO SCREEN ] sorry for my bad english ? and please can you guide me STEP by STEP ( just want it to work again / stock / custom any rom will work for me )
M Tariq Khan said:
Hi bro, i was trying to upgrade my firmware via LG PC Suite and it upgraded my firmware to
D80220C on my LG_LS980 now im stuck at LG boot screen ( light keeps blinking ), cant do anything, pleaseeeeeeeeeeee help ASAP!!!
At the back cover it says LS 980 but the phone was showing it as D 802 ( firmware D80220b ) ABOUT PHONE ( im sure its a refurbished set / had no idea before ) , before upgrading it had D80220C , D80220b was installed on it , any solution [ STUCK AT LG LOGO SCREEN ] sorry for my bad english ? and please can you guide me STEP by STEP ( just want it to work again / stock / custom any rom will work for me )
Click to expand...
Click to collapse
Phone off you hand logo lg
You need short testpoint phone detect qhsusb_bulk and show very partitiont download tool unbrick qualcom 9006 of my download all partitiont img and use tool unbrick qualcom 9006 of my unbrick
If you attack pc detect qhsusb_bulk but no show very partitiont you try unplug cable and inplug attack again( and again) and show partitiont done.Next unbrick
tungkick said:
Phone off you hand logo lg
You need short testpoint phone detect qhsusb_bulk and show very partitiont download tool unbrick qualcom 9006 of my download all partitiont img and use tool unbrick qualcom 9006 of my unbrick
If you attack pc detect qhsusb_bulk but no show very partitiont you try unplug cable and inplug attack again( and again) and show partitiont done.Next unbrick
Click to expand...
Click to collapse
Thankyou, Update : I can go to Download mode, but when i enter into Dwn mode it there is a blackscreen written FASTBOOT, RESET , PORT etc , any idea how to fix it? Model : D-800-32GB
M Tariq Khan said:
Thankyou, Update : I can go to Download mode, but when i enter into Dwn mode it there is a blackscreen written FASTBOOT, RESET , PORT etc , any idea how to fix it? Model : D-800-32GB
Click to expand...
Click to collapse
PHONE of you in fastboot
need download driver fastboot connect pc and install
use fastboot flash all partitiont in cmd
fastboot flash boot boot.img (enter)
fastboot flash aboot aboot.img
fastboot flash tz tz.img
fastboot flash rpm rpm.img
fastboot flash laf laf.img
fastboot flash recovery recovery.img
fastboot flash sbl1 sbl1.img
all file partitione download http://downloads.codefi.re/autoprime/LG/LG_G2/D800/Stock_Firmware/10d_partitions
My Lg G2 (D801) stuck at fastboot screen no download mode after flashing Grola rom. I have done all the steps to recover my g2 , yesterday my phone is showing qhsusb in device manager but i followed xda post and i recovered from that but when i try to enter in download mode within a second it goes to fastboot screen. I extracted laf , boot, etc from kdz rom file and i mistakeny flashed bin format files and after that g2 goes to fastboot screen it detects with pc and it also show in device manager but not able to flash anything like if i enter Fastboot reboot command in cmd it displays(Reboot. . .) and on g2 it shows (Fast : Reboot) but it never performs the reboot , Please help me i appericiate your help.View attachment 3305814
Tarunv1994 said:
My Lg G2 (D801) stuck at fastboot screen no download mode after flashing Grola rom. I have done all the steps to recover my g2 , yesterday my phone is showing qhsusb in device manager but i followed xda post and i recovered from that but when i try to enter in download mode within a second it goes to fastboot screen. I extracted laf , boot, etc from kdz rom file and i mistakeny flashed bin format files and after that g2 goes to fastboot screen it detects with pc and it also show in device manager but not able to flash anything like if i enter Fastboot reboot command in cmd it displays(Reboot. . .) and on g2 it shows (Fast : Reboot) but it never performs the reboot , Please help me i appericiate your help.View attachment 3305814
Click to expand...
Click to collapse
Any update?
Hello, my name is Alberto, i've a big problem with my tablet.
I've tried to root the device but probably i have choosen the wrong rooted system maybe from another region, so now the tablet stay always on the asus logo and i can't enter in recovery modo to upgrade the firmware.
If i try to enter in recovery mode i see a screen with the usb cable in the centre and starting from left on top the following commands :
Droidbot provision os
IFWI version 51.33
serial num . 1111111111111111
Droidboot version : local build or english version
After, all the command with volume up and down for :
Reboot droidboot
reboot
factory reset
sd download
power off
Down in can see :
E: unable to open debricking
Fastboot init...
Fastboot CMD WAITING...
Everytime i try to install a new firmware the asnswer is :
unable to rename file cache/update.zip
unable to write file/cache.zip
That's all.
I don't know what to do to unbrick the tablet, before was android 4.3 but now i don't know what i have done.
Please help me if you can with instructions and programs to use.
The device is not seen by my pc with seven and if i try to flash the original asus upgrade it fails.
Hope you can help me.
Sorry for the disturb guys.
Thank you.
Alberto
Gabbathe said:
Hello, my name is Alberto, i've a big problem with my tablet.
I've tried to root the device but probably i have choosen the wrong rooted system maybe from another region, so now the tablet stay always on the asus logo and i can't enter in recovery modo to upgrade the firmware.
If i try to enter in recovery mode i see a screen with the usb cable in the centre and starting from left on top the following commands :
Droidbot provision os
IFWI version 51.33
serial num . 1111111111111111
Droidboot version : local build or english version
After, all the command with volume up and down for :
Reboot droidboot
reboot
factory reset
sd download
power off
Down in can see :
E: unable to open debricking
Fastboot init...
Fastboot CMD WAITING...
Everytime i try to install a new firmware the asnswer is :
unable to rename file cache/update.zip
unable to write file/cache.zip
That's all.
I don't know what to do to unbrick the tablet, before was android 4.3 but now i don't know what i have done.
Please help me if you can with instructions and programs to use.
The device is not seen by my pc with seven and if i try to flash the original asus upgrade it fails.
Hope you can help me.
Sorry for the disturb guys.
Thank you.
Alberto
Click to expand...
Click to collapse
Anyone can help me please? :crying: