The battery of my phone died some months back and recently I bought a new battery. The phone used to turn on with the earlier battery but never used to last without charger. Now I got the new battery installed it doesn't turn on. When I plug it in the wall charger, the motorola logo appears and the battery sign appears with 0-5% battery everytime and it vanishes in 5 seconds.
I don't have a factory cable.
Is there any other way I can turn my phone on?
Related
My photon was on 5% about an hour ago... then it turned itself off. I plugged it in to the charger and a "white/faint yellow" LED comes on. Normally the photon doesn't have a charge LED so this certainly struck me as odd.
It has been sitting for almost an hour and still won't turn on.
I took the battery out and reconnected the charger and the white/faint yellow LED comes back on, even with the battery pulled out.
What is happening here? Has anyone seen this?
I've see green/orange/red LED flashes for diff things but never white.
Well I found this thread: http://forums.androidcentral.com/sprint-photon/107931-led-not-working.html#post1147045
Looks like white means very low battery and charging. Now the white light has gone off while plugged in... But it still will not turn on
Turns out, I was plugging it into a PC usb that didn't have the drivers installed. The phone won't charge if the moto drivers are not installed, regardless of the light
I plugged it into a wall charger and viola... its back and running.
False alarm!
Lol, exact same thing happened to me! I totally freaked out, but plugged it in a wall and started working.
same thing happened to me yesterday. I plugged into the wall, NOTHING. I started freaking out, until I pulled the battery and re installed it. LED charge light then came on and all was good. Weird.
Can someone help me i have a photon also but when i plug it up it says failed to boot 2 starting rsd mode battery too low to flash and it wont boot up when plugged up to a computer. also when i plug it into the wall it just boot to the m sign
rodre12 said:
Can someone help me i have a photon also but when i plug it up it says failed to boot 2 starting rsd mode battery too low to flash and it wont boot up when plugged up to a computer. also when i plug it into the wall it just boot to the m sign
Click to expand...
Click to collapse
- Pull battery
- Put it back in so it's off
- Keep it plugged into the wall to charge it
- Once charged, power into RSD mode (power+vol up)
- Plug into computer and start RSD and flash 154_5 SBF to get back to stock
- then flash 198_7 SBF for good measure.
- Reboot
When i try that nothing works, it just stays on the white led light
I just bought mine from best buy and it did the same thing..they exchanged the phone since it was defective..
Sent from my MB855 using xda premium
Photon won't turn on anymore. White LED when plugged in
i have a refurbished replacement photon from best buy geek squad that i got last month. within a few days it was acting strange and randomly/often turning itself off. the battery was fully charged yet the unit would often times power down. this happened a lot the first few weeks. then last week the issue seemed to stop and it stayed on 24/7 as i charged it frequently. all was well until yesterday.
i dropped my phone from about 2 feet. the phone turned off and only the "m" boot up screen appeared after i powered on, then it went black. i had a fully charged battery in the unit when this happened. i plugged the charging cable into the phone and it kept booting up to this static "m" screen then turning off. the LED notification light went red and after numerous times powering on and off and resetting the battery (and sim card) i finally got a "5%" battery screen. a few seconds later it showed 100% battery then kept rebooting to the static "m" screen and shutting off again. then i started getting a "?" screen for the battery a few times and back to the 5% and it changed to 80%/100% very quickly and back to the blank screen. i left it plugged in overnight.
now the LED notification light turned white and the phone cannot be powered on. i tried another battery without any success so that shouldn't be the issue.
any ideas what to try next?
same thing happened to me.
thevaporz said:
i have a refurbished replacement photon from best buy geek squad that i got last month. within a few days it was acting strange and randomly/often turning itself off. the battery was fully charged yet the unit would often times power down. this happened a lot the first few weeks. then last week the issue seemed to stop and it stayed on 24/7 as i charged it frequently. all was well until yesterday.
i dropped my phone from about 2 feet. the phone turned off and only the "m" boot up screen appeared after i powered on, then it went black. i had a fully charged battery in the unit when this happened. i plugged the charging cable into the phone and it kept booting up to this static "m" screen then turning off. the LED notification light went red and after numerous times powering on and off and resetting the battery (and sim card) i finally got a "5%" battery screen. a few seconds later it showed 100% battery then kept rebooting to the static "m" screen and shutting off again. then i started getting a "?" screen for the battery a few times and back to the 5% and it changed to 80%/100% very quickly and back to the blank screen. i left it plugged in overnight.
now the LED notification light turned white and the phone cannot be powered on. i tried another battery without any success so that shouldn't be the issue.
any ideas what to try next?
Click to expand...
Click to collapse
Try to fully charge your battery using portable battery charger.
When battery full charge, try to entering recovery mode. From off condition, press both power and volume down, press down until you find android recovery and press volume up button. After you see exclamation logos, press both volume up and down. Then select wipe data. Hope fully you can still entering recovery mode.
If you cannot enter recovery mode, try to enter RSD protocol.
step is, connect your photon to PC using cable data, press both volume up and power, wait until it show RSD Protocol, than flash it again.
How to flash using RSDLite is in development section, you can read there.
Hopefully its can work
DssTrainer said:
Turns out, I was plugging it into a PC usb that didn't have the drivers installed. The phone won't charge if the moto drivers are not installed, regardless of the light
I plugged it into a wall charger and viola... its back and running.
False alarm!
Click to expand...
Click to collapse
I just had a mini-anxiety attack until I found your post. Thank you!
I just switched to an i9100 and gave my wife my old i777. I restored this phone back to stock rooted. The problem at first the phone would reboot when trying to turn it off, also when putting the battery back in it would automatically turn on. Now i pulled the wifes phone off the charger, it was fully charged and had the full charge notification. After the phone had been unplugged from the charger for 10mn the full charge notification was still in the status bar. I tried turning the phone off and it would not even reboot this time, just this weird loop, see vid http://youtu.be/PKyYhXhu4zY
Hi to all
Hope that somebody will be able to help me. The battery on my Venue was completely drained last night during a phone call and the phone shut down. I connected the charger, waited for 30 minutes and tried switching it on, but all I got was the info on the screen is a pic of battery with 0% in it. I tried charging it overnight, connecting it to a computer, but nothing happened, each time I try to switch it on, I get that info (battery 0%).
The battery was ok, I was using it for two whole days before it drained so much that it shut down. I have no custom ROM installed, everything is completely from the factory. I tried taking the battery out, SIM card out, SD card out, no luck. Never had my battery completely drained before, so I can't say if this would happen before. Battery worked perfectly until now.
Found an info that it might be due to the battery protection circuit...? Unfortunately, can not take it/send it to Dell as I bought it in US, and I'm in Europe now. Any idea of what I could do? I would really appreciate it...
Thanx!
Ok, here I am, not to jinx it, but I think I resolved it. I tried switching on the phone again, but with no success. Then I tried entering the setup menu (or whatever it's called) by pressing 'volume down' key and on/off switch, in which I succeeded and saw the setup screen. I DID NOT TOUCH OR CHANGED ANYTHING, just left it like that, connected to the wall outlet charger for a few minutes. After the screen shut down on itself, I took out the battery (after unplugging it from the wall outlet) and put it back after a couple of minutes. Then I plugged the phone in the USB slot of my computer and left it like that for 15 minutes. I tried switching it on again and it worked - the battery was on 3% and the status was 'charging'. Now it's on 51% and 'charging'.
I hope that is the end of the problem, I will never let the battery drain out completely again. Just to be on the safe side, I ordered another battery from dell.com.
Hope this helps someone.
hi you, my V had that problem too, i shutdown phone, connect the adapter, icon battery show on the screen and wait 15 minutes then hold on power button, everything will be ok
i also had a problem charging with the wall adapter when i switched to custom rom (cm7) for 2 days but after 2 days it started charging from the wall adapter..
Thanks a lot people here
This helped me a lot
My dell was 0% when it switiched off automatically
I connected to wall charger in the night
Till morning it was 0%
I read above
But all I did was connected it to USB slot in PC
and left for 10 mins
Then started it
And it went on
No such problem has arised for me till now.
Actually im using samsung galaxy y's wall charger!As i had that in my room, and both uses same charger, i didnt change it and kept dell charger in the box only!
Though using data cable of dell for pc
Wall charger takes 2hrs max to charge the venue fully.
So I went on vacation and left my phone home and the battery died when I was gone. So I just got home today and my plugged in my phone to a generic universal battery charger, my original ac adapter bit the dust a few weeks ago.
So my phone goes in to bootstrap, I am on eclipse 2.1, and then I hit reboot and it boots up and i can unlock it and it says it is charging but it will go from 5% to 4% and then shuts off. Any Ideas?
X2guy said:
So I went on vacation and left my phone home and the battery died when I was gone. So I just got home today and my plugged in my phone to a generic universal battery charger, my original ac adapter bit the dust a few weeks ago.
So my phone goes in to bootstrap, I am on eclipse 2.1, and then I hit reboot and it boots up and i can unlock it and it says it is charging but it will go from 5% to 4% and then shuts off. Any Ideas?
Click to expand...
Click to collapse
Did you try leaving it in bootstrap? Your phone charges while in bsr
Come over to the dark side...
SGP521 LTE version tablet running MM not charging using magnetic cable nor usb-cable. Tried both original and spare and also different wall charges. No luck.
Tried also software repair via Xperia Companion but no success.
When tablet powered off I connect the charger, red light comes on for few seconds and then goes off. Tablet shows the battery percentage but is not charging.
When tablet on and I connect charger the tablet sounds like usb is connected and shows also usb-connected icon. Also stamina goes off when charger connected but battery does not charge.
I have only 20% battery left and soon the device will die...
Any ideas what's the root cause for "not_charging" -issue? What to do to get charging feature back alive?
Hello I had this identical issue a week or so ago with my SGP511. The solution for me in the end was to plug the charger in using original SOny charging cable and plug. The red light went on then off again and screen stayed off, but i left it overnight for about 10 hours. In the morning the tablet was still dead but i unplugged the charger, then plugged it in again. This time the red light stayed on, and after a few minutes, the screen lit up and it started to charge.
Please note this took me several days of constantly unplugging and plugging back in, so not sure what the final fix was but the above was the last thing i did before it started to work.