[Q]How to boot into recovery\Kernel Panic! - Sprint Samsung Galaxy Note 3

I flashed the engineering bootloader and got my Note 3 rooted. I then flashed TWRP recovery but anytime I try to boot into recovery I get a Kernel panic error. Has anyone else had this and been able to fix it. I have tried reflashing the recovery multiple times and flashing the bootloader again but I still get the error.
The phone boots into normal mode without a problem though.

kholdstare said:
I flashed the engineering bootloader and got my Note 3 rooted. I then flashed TWRP recovery but anytime I try to boot into recovery I get a Kernel panic error. Has anyone else had this and been able to fix it. I have tried reflashing the recovery multiple times and flashing the bootloader again but I still get the error.
The phone boots into normal mode without a problem though.
Click to expand...
Click to collapse
I had a similar issue. I had to go get the 4.4 testing version of TWRP
Here is a link to a thread that includes it...Step 3
http://forum.xda-developers.com/showthread.php?t=2656334

Thanks that version worked perfect. I had tried so many before that I am glad you responded.

I had the same problem but I just reflashed everything and worked fine, only did the 4.4 twrp yesterday.
Sent from my SM-N900P using Tapatalk

Related

Stuck, need help

I rooted my rezound and flashed a rom with no problems. Today I tried flashing a different rom and I have been unable to start my phone since. I can get into recovery, wipe, flash etc.. but nothing I've tried has gotten my phone to boot. I've tried Awesome Recovery Tool-> Touchscreen based PH98IMG Creator for MainVer which isn't helping and I don't know what else to do. The last message I saw in hboot was something about the main version is older. Can someone please help me get my phone to boot please
This worked well for me:
http://forum.xda-developers.com/showthread.php?t=1467099
k9tim said:
This worked well for me:
http://forum.xda-developers.com/showthread.php?t=1467099
Click to expand...
Click to collapse
Thanks but that wouldn't work via recovery but I did manage to get my problem fixed!! I managed to "fastboot flash boot boot.img" then boot into recovery and flash the rom and thank god it worked!!
sungal said:
I rooted my rezound and flashed a rom with no problems. Today I tried flashing a different rom and I have been unable to start my phone since. I can get into recovery, wipe, flash etc.. but nothing I've tried has gotten my phone to boot. I've tried Awesome Recovery Tool-> Touchscreen based PH98IMG Creator for MainVer which isn't helping and I don't know what else to do. The last message I saw in hboot was something about the main version is older. Can someone please help me get my phone to boot please
Click to expand...
Click to collapse
the problem u were having has to do with kernels.
when u first tried flashing a different rom, were u going to ics from gb or gb from ics?
gb roms and ics roms have different kernel.
"fastboot flash boot boot.img" then boot into recovery
and flash the rom was the right call.
just wanted to let u know this.

Bootloops into clockworkmod recovery over and over

I rolled back from MMROM to NOTTACHTRIX Today and now my phone is stuck in CWM. (Cold Boot Android by selecting Boot Anroid NO BP option doesnt work either).
I have flashed MROM, Neutrino, NOTTACHTRIX, CM10.120120720 and all ended up into clockwork mod recovery. Kindly tell me an alternative -.- I am stuck with this from past 12 hours and no luck.
Update
I have managed to boot into android using Cold Boot without BP (i-e GSM radio will be disabled). I am recharging my phone battery and experimenting.
Before flashing NOTTACHTRIX, my phone had SKT version of 2.3.5 v167. I directly went for unlocking bootloader blabla recovery to get the NOTTACHTRIX working (thats like 4 months ago when I bought this phone)
So I tried going back to a version near 2.3.5 or higher. So going for 141 AT&T version didnt seem a problem for me except the .91 version bricks the device if u downgrade from 2.3.5 or above.
RSD Lite gave me 0x703e error and I couldn't flash the stop sbf.
Second resort I did was flashing 2.3.5 and 2.3.6 fruitcakes and still ended up in recovery.
I can only coldboot into android with Neutrino ROM other roms give me rebootloop when I choose coldboot.
I am suspecting a corrupted system or some kind of corrupt script in boot which keeps me in a loop into recovery. I did try adb script for ASUS TF101 to exit recovery bootloop but to no luck.
Also, I tried exitrecovery.zip flashable and still couldnt get into regular android OS.
This device is a headache for me now -.- and seemingly no one bothers to reply or to help me solve this issue >_>
Thanks for reading atleast
Update 3
Fixed it myself.
I downloaded fastboot, 2.3.6 fruitcake (system and boot), the older clockwork mod recovery, the one comes with Bootloader unlocking not some 5.0 version.
All I did was erased RECOVERY from fastboot, then boot and system. Frasled boot and system. Rooted with the bootloader unlocker package. Installed the old recovery and flashed NOTTACHTRIX.
Did all rom u flash succesfull..or fail mount?
Can u mount/unmount system..data etc..
If no..then yr cwm was not fr yr models..try another version
Yr detail on process but without the error msg..if flash ok then should be boot if not it must giv aome error while falshing even its completed
Sent from my e2001v21_v89_jbl1a698_2g using xda app-developers app
mynonama said:
Did all rom u flash succesfull..or fail mount?
Can u mount/unmount system..data etc..
If no..then yr cwm was not fr yr models..try another version
Yr detail on process but without the error msg..if flash ok then should be boot if not it must giv aome error while falshing even its completed
Sent from my e2001v21_v89_jbl1a698_2g using xda app-developers app
Click to expand...
Click to collapse
It was the bug of rebooting into CWM recovery and yes I was using right recovery for my Atrix i-e Rom Racers. Right now I am 4.x recovery and that works 100% to my needs on NOTTACHTRIX
And I flashed the fruitcake using fastboot. No flashing of stock sbf
Please help...recovery bootloop
dark_prince said:
It was the bug of rebooting into CWM recovery and yes I was using right recovery for my Atrix i-e Rom Racers. Right now I am 4.x recovery and that works 100% to my needs on NOTTACHTRIX
And I flashed the fruitcake using fastboot. No flashing of stock sbf
Click to expand...
Click to collapse
I have the same problem and tried several CWMs, and TWRP.
I can only boot to recovery, unless I try to boot with the BP HW Diag & Boot AP. Then I can cold-boot into Android, but with no USB support (so no ADB or charging capabilities).
I should have left my phone alone...I was running Nottachtrix just fine. Tried to flash CM 7 and then encountered this problem.
I have tried to restore, flashed new Roms, flashed new recoveries, flashed new boot.img, etc. No luck yet.
Tried the exitrecovery.zip, scripts to reset boot flags, full wipe and reload nottachtrix, flash radio, etc.
Still no luck.
Tried CWM version 4.xxx following instruction above, flashed fruitcake, rooted...still no luck.
Anyone have any advice?
Thanks in advance.
noobButStudying said:
I have the same problem and tried several CWMs, and TWRP.
I can only boot to recovery, unless I try to boot with the BP HW Diag & Boot AP. Then I can cold-boot into Android, but with no USB support (so no ADB or charging capabilities).
I should have left my phone alone...I was running Nottachtrix just fine. Tried to flash CM 7 and then encountered this problem.
I have tried to restore, flashed new Roms, flashed new recoveries, flashed new boot.img, etc. No luck yet.
Tried the exitrecovery.zip, scripts to reset boot flags, full wipe and reload nottachtrix, flash radio, etc.
Still no luck.
Tried CWM version 4.xxx following instruction above, flashed fruitcake, rooted...still no luck.
Anyone have any advice?
Thanks in advance.
Click to expand...
Click to collapse
did you try the updated and usually standardly used CWM, 5.0.2.6?
palmbeach05 said:
did you try the updated and usually standardly used CWM, 5.0.2.6?
Click to expand...
Click to collapse
Yes, thanks for the reply. I tried this one, and the CWM touch version advertised as designed for this phone model. No luck.
Aaaand.....I got impatient and tried to flash an sbf. Stupid, I know. Now, I have a shiny new brick.
Oh well, I ordered a new one from ebay, and I will spend my free time learning about possible ways to unbrick a phone.
noobButStudying said:
Yes, thanks for the reply. I tried this one, and the CWM touch version advertised as designed for this phone model. No luck.
Aaaand.....I got impatient and tried to flash an sbf. Stupid, I know. Now, I have a shiny new brick.
Oh well, I ordered a new one from ebay, and I will spend my free time learning about possible ways to unbrick a phone.
Click to expand...
Click to collapse
What's the msg that your brick is giving you? did you try flashing the pudding sbf and then trying to flash a custom ROM?
Resolved!
palmbeach05 said:
What's the msg that your brick is giving you? did you try flashing the pudding sbf and then trying to flash a custom ROM?
Click to expand...
Click to collapse
So here's the full story:
It would boot up and say "failed to boot 1"
It would not boot into fastboot(power on while pressing vol down). When I tried to boot into RSD(power on while pressing vol up), it would give the same error and say "PWR REASON PWR KEY PRESS" and then say Fastboot Protocol Support.
Using RSD, it would recognize the phone as being in fastboot mode, and any flashes would fail...including pudding.
Using fastboot, it would connect but give errors if I tried to flash or erase anything, like it was locked. When I tried to unlock again, it would say " OEM unlock not implemented."
This is why I figured it was bricked...the bootloader seemed hosed. Couldn't use RSD, and fastboot was useless.
But...after screwing around with it (battery pulled and re-inserted while holding various buttons) while connected to RSD, I noticed that the same error was there but somehow RSD recognized it! (I think the magic combo was to hold power and vol up while actually inserting the battery.)
So I flashed pudding, and it worked! Re-rooted, loaded CWM (using auto unlock 4.2), and the phone booted to stock config. It was still acting flaky (I don't think the sbf had loaded right), and it was unable to boot back into recovery, but I flashed CWM again using rom manager and was able to do a full recovery!
Yay!! I am ridiculously happy right now!
Anyway, when my ordered phone comes in, I will have a spare to play with. This one is staying as is from now on. (until I get bored again)
noobButStudying said:
So here's the full story:
It would boot up and say "failed to boot 1"
It would not boot into fastboot(power on while pressing vol down). When I tried to boot into RSD(power on while pressing vol up), it would give the same error and say "PWR REASON PWR KEY PRESS" and then say Fastboot Protocol Support.
Using RSD, it would recognize the phone as being in fastboot mode, and any flashes would fail...including pudding.
Using fastboot, it would connect but give errors if I tried to flash or erase anything, like it was locked. When I tried to unlock again, it would say " OEM unlock not implemented."
This is why I figured it was bricked...the bootloader seemed hosed. Couldn't use RSD, and fastboot was useless.
But...after screwing around with it (battery pulled and re-inserted while holding various buttons) while connected to RSD, I noticed that the same error was there but somehow RSD recognized it! (I think the magic combo was to hold power and vol up while actually inserting the battery.)
So I flashed pudding, and it worked! Re-rooted, loaded CWM (using auto unlock 4.2), and the phone booted to stock config. It was still acting flaky (I don't think the sbf had loaded right), and it was unable to boot back into recovery, but I flashed CWM again using rom manager and was able to do a full recovery!
Yay!! I am ridiculously happy right now!
Anyway, when my ordered phone comes in, I will have a spare to play with. This one is staying as is from now on. (until I get bored again)
Click to expand...
Click to collapse
The RSD issue and not being able to do anything. you are the 4rd person that i've dealt with to have that issue. we had a guy on here a few wks ago that me and andresrivas were trying to help. he wasn't getting the bootloop you were getting, but he had a very similar issue and had the RSD issue. like a wk later, i ended up having the RSD issue as well. Andresrivas also has experienced this issue. All i know is flashing that pudding is what saved us as well.
Idk what ROM you're going to put on there, but i would definitely keep that spare around. if your digitizer dies, you have a backup digitizer

Need Some Help!

So I'd been having some problems lately with my phone hanging on the Samsung screen on boot. Been running CM11 1/1/2014 nightly most recently. Decided to try using TWRP instead of CWM. That didn't seem to help my issue, so I tried installing CWM again. I used an app called Recovery Tools to download the touch version of CWM. After it said it installed, I tried to boot into recovery and got the error "Unauthorized software found. Please contact Verizon." (paraphrased a little).
Doing some research it looks like that error typically comes up when the bootloader is locked. Now, obviously I had my bootloader unlocked (well, Loki'd) because I was running CM11. Any help fixing this? I'm able to bypass the warning screen on boot if I hold down vol up + power like I'm going into download mode, but then hit vol down to cancel to boot up the phone. Once booted everything is ok, but any reboot just brings that up again. Using ROM manager to flash CWM recovery seems to work ok and it says its installed, but same issue. So does trying to flash TWRP from Goo.
If I were to run this tool that I used to root and loki before (http://forum.xda-developers.com/showthread.php?t=2301720) to install a recovery, would I be able to get everything going again? I think that somehow the recovery I installed wasn't Loki'd, although I picked the right one for my device.
Thank you in advance for any replies.
The fix I found was by pure dumb luck. I ended up trying to flash a recovery with Odin. Odin failed but reboot back into the os. I then used the twrp manager app from the playstore (mainly because goomanager wasn't downloading the recovery at the time) to flash the latest twrp recovery and all was good. Even though Odin failed at flashing the recovery I still think it helped somehow. I haven't thought much about why but I might have to now.
Sent from my SCH-I545 using Tapatalk
You could probably try using ODIN to get back to stock MDK and then Re-Root and install a recovery after.
Edit: And then flash CM11 again.
Sent from my SCH-I545 using Tapatalk
Will this one-click stock ROM work?
http://www.rwilco12.com/downloads.p... S4 (Verizon) (SCH-I545)/Stock ROMs/One-Click
or, which of the files on this page are what I would want? (about 1/3 of the way down for SCH-I545)
http://www.droidviews.com/how-to-install-latest-official-firmware-on-samsung-galaxy-s4-all-models/
I was actually able to reflash TWRP w/ their app from the Play Store. Still get a lot of boot hangs on the Samsung logo though. Seemed to happen less with CWM, but now I'm too scared to try to install a different recovery. I appreciate all your help guys.

[Q] Boot Certification Verify

So I tried to get into recovery and the phone reboots with a message of boot certification error/verify. I can still boot into download mode and my phone works as normal just can't get into recovery. Am I at a point of where I need to use FlashTool and flash a tot file or is there something I can do without having to go to use FlashTool. Any hindsight on what I need to do would be appreciated.
As well this all happened over night without me even doing anything with my phone. I had woke up and seen a blue screen on and it said partial system failure. I had flashed Cm11 yesterday and that worked wonderfully, ran Cm11 all day yesterday with no issues.
Thank you.
whoppe862005 said:
So I tried to get into recovery and the phone reboots with a message of boot certification error/verify. I can still boot into download mode and my phone works as normal just can't get into recovery. Am I at a point of where I need to use FlashTool and flash a tot file or is there something I can do without having to go to use FlashTool. Any hindsight on what I need to do would be appreciated.
As well this all happened over night without me even doing anything with my phone. I had woke up and seen a blue screen on and it said partial system failure. I had flashed Cm11 yesterday and that worked wonderfully, ran Cm11 all day yesterday with no issues.
Thank you.
Click to expand...
Click to collapse
Flash new recovery (stock or bumped TWRP).
Use shell and dd it.
_Dennis_ said:
Flash new recovery (stock or bumped TWRP).
Use shell and dd it.
Click to expand...
Click to collapse
Thanks you. Flashed the bumped TWRP with flashify and it worked perfectly.

[Q] Cant install recovery or boot in recovery anymore..

I workerd some days before and i dont know what happend.
I unlocked my bootloader and did pretty much everything. Ive installed cm12 and everything worked perfectly. Only thing that annoys me was the Cyanogenrecovery that forced me to flash twrp manually after every update.
The TWRP App says i got 2.8.4.0 installed. But i cant boot into it. The Led blinks pink and then it goes off and cm starts booting like nothing happend. I tried to reflash the recovery but it did not work.
Please help, i just want to update cm and install xposed
xan_asmodi said:
To gain a persistent recovery, one needs to flash a recovery to the fota partition as explained here: cant post twrp sirius link here bc xda spam prevent...
I figured that it was an error with Infected's CM12 nightlies. I flashed the latest boot.img and I was sorted.
Click to expand...
Click to collapse
this fixed it for me ^^

Categories

Resources