Hi,
Recently I have received and installed a new CM nighly release after that my tablet worked for several days and then went into bootloop. First it was booting into OS for a minute or so and then reloading. I have tried to install a previous nighly release from settings menu and device just started to bootloop on CM logo. Sometimes it just frezees on this logo.
I tried then to wipe data from recovery mode, but it just freezes on formatting /data, wiping cash goes ok.
I also updated to CWM 6.0.3.1 touch and tried to wipe data but it also freezes.
I have stuck at this point as I can't reinstall CM 10.1 on my device, and I need your help please.
My device: Samsung Galaxy tab 10.1 GSM
Cyanogenmod 10.1
ClockWork Recovery 6.0.3.1
Actually I finally fixed it.
It might be interesting for some one.
So, in the end I have flashed/installed official ROM from samsung-updates. com
Just simply done it download mode via Odin 1.85 (added to PDA and pressed start). After that my tablet returned to stock firmware but did not want to load into OS and just was showing Samsung logo. I have waited may be 20 min for it and then reloaded in recovery and from recovery mode (power + vol down) managed to finally wipe data. After that my ablet reloaded and Ta-Da it loaded official firmware with all my previous apps.
I am happy Hope that may help someone.
Related
i Wanted to install CM on my galaxy s3, downloaded the cm installer both on phone/windows, got my phone prepared and started the installation. phone got to downloading mode, installer said that it's installing recovery, then phone switched from download mode to cyanogen logo. on PC there was still "installing recovery" (on cm installer program i mean) then after like 5mins, cm installer said that it's preparing for installation, and seconds later "we couldn't talk to your phone" phone got stuck on cm logo. tried rebooting it but it boots to cm logo and doesn't go further, i can't get to recovery mode either, when i try to do volup+home+power combination it just tries to start normally and stucks on cm logo. i can get to download mode easily. i don't know what to do. downloading stock firmware ATM and will try to get it in with odin throu download mode ://
Flash any custom recovery via Odin. I suggest TWRP. Download cm and gapps and put those files on your SD card via computer. Than flash cm through previously flashed phone's custom recovery from that external SD card.
____________________________________________
P3110 / I9300 / I9100 / NEXUS 5 / iPAD2
(Please excuse my poor English)
I have a Galaxy S3 i9300. OS is Android 4.3, rooted, and old version CWM recovery installed.
I can't remember exact OS and CWM recovery versions, because I had installed them years ago.
Today, I had decided to upgrade my old CWM recovery. I installed ROM Manager apps from
Google Play Store. (I installed and used the Rom Manager app for the first time)
I ran the Rom Manager app and upgraded CWM recovery as the app instructed. No errors were
reported. Then I chose "Reboot into Recovery".
Then the big trouble happend.
1. Normal "Samsung GALAXY S III GT-I9300" boot message appeared
2. Small Hat image and "ClockworkMode Recovery v6.0.4.6" message appeared
3. Screen blacked out.
4. Repeat 1~3 infinitely.
When I tried to connect via USB, my Windows7 PC could not recognize the i9300 at all.
I cannot use the i9300 as phone, too. I cannot do anything at all.
How can I fix this big trouble?
I have the same problem with TWRP recovery, keeps rebooting over and over again, sometimes the recovery menu appearing and reboots after some seconds automatically, please help
I had the same problem with my i9300 with CWM recovery it kept booting back to recovery no mather what i did i can recoment 2 things
1.flash new recovery with odin(did not try this but xould help
2. Flash original samsung firmware also with odin (this helped me)
My advice i olny flash recovery with odin roms with recovery
Thank you. I could fix the problem by flashing another kind of recovery app.
1. Enter the odin mode (press volume_down + home + power when power up , http://forum.xda-developers.com/wiki/Odin_mode )
2. Connect i9300 to PC via USB
3. Flash another kind of recovery app using Odin (in my case. CWMs are not work, but TWRPs are good)
I have a Samsung Galaxy Tab 2 10.1 GT-P113
I rooted it with Philz Touch 6.6.26.1 and Clockworkmod v 6.0.4.7
I have Android 4.2.2 Build shakatu_JDQ39.P5113UEUCMH2_rooted
All was working fine until one day I noticed the tablet would keep rebooting on it's own even in safe mode. I booted into Philz Touch with no restarting.
I did some research and apparently there was an update from Samsung that may have caused this issue.
I tried to reflash but it wouldn't take as it would do exactly as before (rebooting). Once booted up I can use the tablet for about 43 seconds before the screen goes black and reboots. I tried to do a proper shutdown to see if it would correct any issues but no luck.
I also tried moving an app on the screen to a different location then do a proper shutdown. When I booted back up the app was in it's original place. It's as if the system is in read only mode?
I tried doing a system format etc and Philztouch said it was formatted but upon reboot it was unchanged.
I have nothing I need to save on the tablet so I can do a full erase if needed but I haven't been successful in doing that. I've used Odin to load a flash image with no luck either.
If anyone has some helpful suggestions I would appreciate it.
Jason
Hi,
I have a hand me down Galaxy S3 which seems to have a custom rom (it's loaded with TWRP 2.x). This device is stuck in reboot loop. Here's what I've tried so far:
1. Cleared dalvik cache
2. Cleared normal cache
It still is stuck in the loop
Downloaded Odin 3.12 and twrp-3.0.2-2-i9300.img.tar.md5, but Odin keeps freezing (Windows 10) so I can't get that to work.
I downloaded the Samsung USB tool from Samsung's website as well. I'm at my wits end on how to fix this reboot loop issue. Any ideas here?
Also, I have NOT been able to find a stock Android ROM for this device either.
Any help is appreciated. What I currently have access to:
1. TWRP screen (with volume up + power + home)
2. Download home (volume down + power + home)
Thanks
The only stock ROM for this phone that can be flashed with Odin is 4.1.1 because AT&T only released ota updates after 4.1.1.
The AT&T s3 forum is here: https://forum.xda-developers.com/galaxy-s3-att
This may help: https://forum.xda-developers.com/ga...ile-sgh-i747ucufne4v4-4-2attall-odin-t3305899
I have an old Galaxy S5 mini (SM-G800F) and recently had to flash a new firmware because it wasn't turning on normally. I flashed the new firmware (pretty sure the right one) with the latest version of Odin, and all proceeded well, until the phone rebooted itself, and there the Samsung logo is flashing. I tried to enter the recovery mode and it worked, i wiped both data anche cache partiton from recovery mode and then rebooted, but it still has the Samsunf logo flashing. Don't know how to fix this, thanks.
Fixed
DaddeRaga said:
I have an old Galaxy S5 mini (SM-G800F) and recently had to flash a new firmware because it wasn't turning on normally. I flashed the new firmware (pretty sure the right one) with the latest version of Odin, and all proceeded well, until the phone rebooted itself, and there the Samsung logo is flashing. I tried to enter the recovery mode and it worked, i wiped both data anche cache partiton from recovery mode and then rebooted, but it still has the Samsunf logo flashing. Don't know how to fix this, thanks.
Click to expand...
Click to collapse
Sorry for bothering you, you can close this thread because the phone just turned on after like 1 hour or even more.