I bought a goophone i5c from goophone.cc the rom it had installed was a bit sluggish so i updated it to the latest firmware
Was unaware it must of been the wrong version and bricked the phone
the model is mt6572
and has the goophone bee logo on the back and has been comfirmed to be an official goophone at inspection of the mobo.
i have the mediatek drivers installed and i am able to get flash tools to flash but i get a error such as this
" brom error s_ft_enable_dram_fail (4032)"
i have tried multiple flash tools
tried multiple roms
tried multiple drivers and, computers
any help would be greatly appericated
Related
Hi all! My phone is Star N9500. And when I want update it to 4.2.2, it bricked, because it update preload.
Erorr is:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
Please help me!
I went to the NeedRom website and downloaded the latest ROM that was not customized and followed the instructions there to unbrick my Star N9500.
Some of these ROM's and in particular the instructions are very lacking in how to do the flash process. To be honest it sucks.
Someone needs to do a complete, concise and thorough tutorial on how to do these ROM flashes. Plus there are two or three methods on how to do them. Some use an outside tool application installed on Windows others use an internal Android app like MobileUncle and then flash from an SD Card.
Again... IMHO most instructions are lacking and somewhat confusing.
STAR n9500
help my star n9500 is bricked..and windows can't detect the driver..it is said "Unknown device" What should I do???
is there any solution???
i have an Neken N6 it is a MTK6589T phone. Its not a clone. So what happened: the software had a problem so i had the brillant idea to flash a rom that were explained as the official ROM for this device. After the flash the phone its like dead not turn on ecc...
If i take off the battery and get back it the pc see the phone, as MediaTek USB VCOM port in the hardware of win.
If i try to reinstall the previous rom with SP Flash Tool i get this error:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL 4032
EMI Enable DRAM Failed
i was trying to see this post that seems to have my same problem but didn't understand how he solved. Didn't understad the question about this preloader file
Some one could help me?
Thank you
Hello,
I have an Lenovo S960, which is an MTK 6589 Device.
Coming to the Point, Yesterday I my little sis didn't know what did, Phone Got Soft Brick.
Ohk, I tried to Re-Flash the ROM with SP Flash Tool Ver 3.1xx But somehow it got stuck on 18% and got error of brom error s_da_sdmmc_write_failed (3149).
When i tried to Format+All Download with the latest version of SP Flash Tool, it keep saying "Unrecognized Rom Detected".
Now, I tried Flashing the same ROM with different Versions of SP Flash Tool, and Got several Errors. amongst which one error really horrified me, i didn't remember exactly what was that, but it was something like No Valid partition Management Table.
After some research i found that the rom can be Flashed via MTK DROID TOOLS Onlyy, but for which i need Back Up of the Rom, which i didn't have.
The point is:
1) Is there any way to Flash the Rom with SP Flashtool bypassing these errors.
2) I would be very thank ful if any one can provide me the Back Up Rom for Lenovo Vibe X S960.
One more thing, This is my Fiance's Phone, and she's about to kill me if i didn't Give her phone on Sunday..
Please Help me..
Hello everybody,
I have a big trouble on my android chinese coolpad 8722-900 (cpu chip Mt6735p, os 5.1.1).
It was complete bricked because of me.
I wrote the wrong flash image on it.
So I think the phone bootloader was broken.
I used the flash tool.
When I flash bootloader by using flash tool, it comes the DRAM Enabled fail error.
I couldn't enable the DRAM finally.
So the phone was complete bricked.
My laptop recognize it but it just appears only with COM port way like COM port 10 on my laptop.
I need whoever help me.
Best regards,
Koet.
Hi guys, I hope someone can help me. I took a punt on a cheap Chinese phone and it arrived with all sorts of malware installed. after a bit of research I discovered I couldn't remove them without rooting, but as its based on an MTK6580 chip, it isn't as easy as using a one click root tool. So after learning I would need to use SP Flash Tool, I proceeded to follow the steps and have ended up bricking it. The MT6580 scatter file I found just results in the following error messages. error s_dl_get_dram_setting_fail 5054 and error s_ft_enable_dram_fail (4032)
The PC recognises it, but I can't find a pre loader that works with it. Has this been royally fooked? or can it be rescued? Any help will be appreciated as it seems decent enough for my needs and I already got my money back but if its gone toes up then its no big deal.
Anyone?