Related
I have my S III for two and a half months. And today it started to boot loop. The phone was working and I leave it on the table. After few minutes I noticed that the phone is in boot loop.
This is my second android phone. Before the S III I had Desire. I have experience in rooting with the Desire (use it without root only 2 months and own it for 2 years). Also while flashing it many times I had boot loops on it -> re-flash always worked.
The S3's situation - it is in boot loop, when I try to start the stock recovery (volup+home+pwr and not releasing the) the phone starts to boot loop as long as I keep the buttons pushed. When I release them the phone stays in booting screen (Samsung logo) - same as I just try to start it. When I put it in download mode (voldown+home+pwr) it works and asks me if I want to continue.
Is there anybody with experience whit the same problem? And should I try to flash the stock rom from SGS3 ToolKit or to use the warranty and let the shop to fix it (probably will hold my phone for a month)?
shiSHARK said:
I have my S III for two and a half months. And today it started to boot loop. The phone was working and I leave it on the table. After few minutes I noticed that the phone is in boot loop.
The S3's situation - it is in boot loop, when I try to start the stock recovery (volup+home+pwr and not releasing the) the phone starts to boot loop as long as I keep the buttons pushed. When I release them the phone stays in booting screen (Samsung logo) - same as I just try to start it. When I put it in download mode (voldown+home+pwr) it works and asks me if I want to continue.
Is there anybody with experience whit the same problem? And should I try to flash the stock rom from SGS3 ToolKit or to use the warranty and let the shop to fix it (probably will hold my phone for a month)?
Click to expand...
Click to collapse
One boot to recovery Vol Up + Home + Power release immediately on splash screen .
No recovery then choice is return to service .
Or flash a stock rom via Odin from the stock rom threads .
jje
release the power vol up and power buttons as soon as you see android while entering recovery. Once you do that try factory reset.
Note: You will lose all your data on internal SD (pics, images etc)
If you want to save data first flash CWM then enter recovery and factory reset. You will be able to save pics, images, music etc by doing so (apps will still be removed)
JJEgan said:
One boot to recovery Vol Up + Home + Power release immediately on splash screen .
No recovery then choice is return to service .
Or flash a stock rom via Odin from the stock rom threads .
jje
Click to expand...
Click to collapse
Vol Up + Home + Power * *release immediately *on splash screen (Samsung logo) -
Stays on spash screen until I pull out the battery. No android logo is displayed.
If I try to flash stock rom via odin is it possible the service to deny my warranty?
shiSHARK said:
Vol Up + Home + Power * *release immediately *on splash screen (Samsung logo) -
Stays on spash screen until I pull out the battery. No android logo is displayed.
If I try to flash stock rom via odin is it possible the service to deny my warranty?
Click to expand...
Click to collapse
Okay follow the steps as mentioned:
Step 1: Download the stock firm ware for your region via sammobile.com/checkfus
Step 2: Open Odin 3.04
Step 3: Put your phone in Download mode
Step 4: Connect to PC
Step 5: Select the firmware (unzip it to get the .tar file if it is a .zip file) as pda..dont touch anything else
Step 6: Click Start and wait till the rom is flashed and your device reboots
Step 7: If the phone is stuck at boot screen after the flash, press vol up+menu+power untill you see a green droid..release immediately
Step 8: Clear Data+cache..you will loose everything on your internal sdcard
Step 9: Reboot
Now if you face any problem in any of the steps mentioned above..tell us which step and what is the error you get...
flashing stock will not void your warranty but the stock rom should be specific to your region..with correct CSC..
zoot1 said:
Okay follow the steps as mentioned:
Step 1: Download the stock firm ware for your region via sammobile.com/checkfus
Step 2: Open Odin 3.04
Step 3: Put your phone in Download mode
Step 4: Connect to PC
Step 5: Select the firmware (unzip it to get the .tar file if it is a .zip file) as pda..dont touch anything else
Step 6: Click Start and wait till the rom is flashed and your device reboots
Step 7: If the phone is stuck at boot screen after the flash, press vol up+menu+power untill you see a green droid..release immediately
Step 8: Clear Data+cache..you will loose everything on your internal sdcard
Step 9: Reboot
Now if you face any problem in any of the steps mentioned above..tell us which step and what is the error you get...
flashing stock will not void your warranty but the stock rom should be specific to your region..with correct CSC..
Click to expand...
Click to collapse
There is the log from odin:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXALF2_I9300GBLALF1_I9300XXLF2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
There are few pit files in the zip with the odin but I don't know which one to use:
GT-I9300_mx_20120220.pit
GT-I9300_mx_20120322.pit
GT-I9300_mx_20120329.pit
M0_20120220.pit
mx.pit
Also tried with latest pit this is the log file:
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXALF2_I9300GBLALF1_I9300XXLF2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Flash via 3 file method..search for the method in the threads..
It does not look good..flashing the pit file is dangerous
Sent from my GT-I9300 using xda app-developers app
De tick the Re-Partition checkbox and try? But your definately going to have to re flash using Odin
Guys thanks for your help. After few unsuccessful attempts to flash with odin, I returned the phone to customer service, and now I'll wait them to fix it. Now I'm with my old Desire until they fix my SGS 3.
shiSHARK said:
Guys thanks for your help. After few unsuccessful attempts to flash with odin, I returned the phone to customer service, and now I'll wait them to fix it. Now I'm with my old Desire until they fix my SGS 3.
Click to expand...
Click to collapse
Hi shiShark,
Any luck when you returned to customer service? I seem to have exactly the same problem.
Out of interest, did your phone show as system Custom in the recovery screen? - Similar to you, I have not rooted or flashed my phone but it says sytem:Custom on the recovery screen and customer service refuse to fix it under warranty.
Thanks.
Will
Im currently using Galaxy S3, which is not stock-romed.
Around for,, few months, i have been using OMEGA ROM, and suddenly, yesterday, the phone went into the infinite loop.
Since then, i ve tried so many solutions. These are what i have done:
1. Download Mode - Odin : didnt work, download mode was successful, but when on ODIN, since the first bar - it says fail. This is the log:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
If i try recon, it becomes :
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
like this for ... idk
2. I tried for recovery mode, i held whatever they said (volume up, power, and home) it seemed working , but it didnt even enter the UI of this freaking recovery mode. I experienced the damn infinite boot loop again. It turns on, turns black for a while, and it turns back to the logo, without entering the recovery mode. If i stop holding the buttons between this "Black" period, the phone gets turned off. I removed my SD card already.
3. So far, these are the only solutions that i could have found on this google.
Can anyone help me please...
PLEASE !
-----------------------------
When i try odin, i see blue bar filled up on the phone. It freezes as the odin fails..
http://forum.xda-developers.com/showthread.php?t=2219755
Teaches you how to flash stock firmware to get back to original firmware. Download mode must still be working though. (Volume Down, Home Button and Power Button)
AndroidPlant
An everyday user.
AndroidPlant said:
http://forum.xda-developers.com/showthread.php?t=2219755
Teaches you how to flash stock firmware to get back to original firmware. Download mode must still be working though. (Volume Down, Home Button and Power Button)
AndroidPlant
An everyday user.
Click to expand...
Click to collapse
I tried for download mode;; but in between it stops the blue bar progresses for a little while,, which freezes after a few sec (as soon as the odin fails)
justinrik said:
I tried for download mode;; but in between it stops the blue bar progresses for a little while,, which freezes after a few sec (as soon as the odin fails)
Click to expand...
Click to collapse
Try that process. Maybe it will work.
AndroidPlant
An everyday user.
AndroidPlant said:
Try that process. Maybe it will work.
AndroidPlant
An everyday user.
Click to expand...
Click to collapse
will there be any way... to rescue the data..? i just need my songs...
justinrik said:
will there be any way... to rescue the data..? i just need my songs...
Click to expand...
Click to collapse
There could be a way. Probably through adb or you may need to search on XDA for a way. Unless its an external SD card.
AndroidPlant
An everyday user.
AndroidPlant said:
Try that process. Maybe it will work.
AndroidPlant
An everyday user.
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLJ1_I9300OLBDLJ1_I9300DXDLI5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
... what shall i do ?? TT
the blue bar doesnt even start to progress :/
Thank you so much btw !
justinrik said:
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
I9300XXDLJ1_I9300OLBDLJ1_I9300DXDLI5_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Added!!
Odin v.3 engine (ID:3)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
system.img
NAND Write Start!!
FAIL!
All threads completed. (succeed 0 / failed 1)
... what shall i do ?? TT
the blue bar doesnt even start to progress :/
Thank you so much btw !
Click to expand...
Click to collapse
No problem? Click it not say it!
Anyway. If you used the Odin that was provided for you it should have worked. If not there is a problem with your phone or something. Make sure all Kies processes are not running.
AndroidPlant
An everyday user.
is keis running you have to stop all kies processes
I think it is cause by CWM file that you used with Odin, because now I have the same problem, success installing in odin, but when I tried to reboot into recovery, it just hang in samsung logo with one tiny red ! on the upper left screen. Hope I can have another .tar.md5 files for my S3 huh...
ayambrand said:
I think it is cause by CWM file that you used with Odin, because now I have the same problem, success installing in odin, but when I tried to reboot into recovery, it just hang in samsung logo with one tiny red ! on the upper left screen. Hope I can have another .tar.md5 files for my S3 huh...
Click to expand...
Click to collapse
so, you are not able to enter recovery mode and also flash firmwares from download mode, have you checked what the Product Name says in download mode.. i think your SGS3 is suffering from SDS, time to send your phone back to Samsung for replacing the motherboard..
suyash1629 said:
so, you are not able to enter recovery mode and also flash firmwares from download mode, have you checked what the Product Name says in download mode.. i think your SGS3 is suffering from SDS, time to send your phone back to Samsung for replacing the motherboard..
Click to expand...
Click to collapse
Everything is ok now after I got the new .md5 file
ayambrand said:
Everything is ok now after I got the new .md5 file
Click to expand...
Click to collapse
good to know that!!
So please upload a link for that .md5 file for bricked s3
ayambrand said:
everything is ok now after i got the new .md5 file
Click to expand...
Click to collapse
so please upload a link for that .md5 file for bricked s3 so the other peoples solve there problems​
sami786_pk said:
so please upload a link for that .md5 file for bricked s3 so the other peoples solve there problems​
Click to expand...
Click to collapse
PLEASE. I am having the SAME issue!!!
HI All
I'm wondering if you guys have seen similar problem. I have currently rooted stock ROM on my Mega but want to install CWM so I can take a backup of the system and try out CyanogenMOD11.
Yet, when I try flashing CWM with Odin it looks like this:
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> recovery.img
<ID:0/012> NAND Write Start!!
<ID:0/012> RQT_CLOSE !!
<ID:0/012> RES OK !!
<ID:0/012> Removed!!
<ID:0/012> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
At this point phone reboots and when I go to recovery - there is no CWM
I will be grateful for any suggestions.
Thanks
I would suggest you try this http://goo.im/devs/philz_touch/CWM_Advanced_Edition/meliusltexx/philz_touch_6.25.0-meliusltexx.tar.md5 assuming you have the GT-I9205 of course.
Kangburra said:
I would suggest you try this _link_ assuming you have the GT-I9205 of course.
Click to expand...
Click to collapse
I will try that, thanks for suggestion :good:
So I tried the above but have same thing happening.
Everything looks as if it's working OK. Odin picks up the phone, I load the image in PDA.
Have Auto Reboot and F.Reset Time enabled (only).
I hit the start button and it's VERY fast - literally few seconds and I get blue RESET! in the top box in Odin.
What's interesting is that after another two minutes Odin will change to PASS!
But that's looong after my phone booted back to normal operation mode, it will also change to PASS even if I have disconnected my phone
Any suggestions anyone?
==== UPDATE ===
What I also noticed is that after I boot to recovery I'm getting ERROR and NO COMMAND - they will flash on the screen and instead of usual Android Robot I have one on it's side with red exclamation mark over it.
No Command and this point is displayed below the "robot".
This is really irritating
One thing when you are flashing a custom recovery on the mega is once you are done flashing with odin you MUST reboot the phone directly into the recovery mode again for like CWM to appear otherwise if you do not do this the stock recovery will be back, this only has to be done once when you first flash a custom recovery..then it will be okay after that.
And with odin that does the same thing for me it says RESET but it still works and after it will say PASS when the phone is disconnected already, not sure why odin does this but seems to have no effect on the flashing part...hope this helps you out.
starmaster10 said:
One thing when you are flashing a custom recovery on the mega is once you are done flashing with odin you MUST reboot the phone directly into the recovery mode again for like CWM to appear otherwise if you do not do this the stock recovery will be back, this only has to be done once when you first flash a custom recovery..then it will be okay after that.
And with odin that does the same thing for me it says RESET but it still works and after it will say PASS when the phone is disconnected already, not sure why odin does this but seems to have no effect on the flashing part...hope this helps you out.
Click to expand...
Click to collapse
That was is!
Thanks for pointing in the right direction.
I've all the same options in Odin but when it auto-rebooted my phone I have quickly pressed the the buttons for going to recovery and that worked. When powering off from recovery I was given an option to disable stock recovery and now it's all as intended.
THANKS!
Ch3rub said:
That was is!
Thanks for pointing in the right direction.
I've all the same options in Odin but when it auto-rebooted my phone I have quickly pressed the the buttons for going to recovery and that worked. When powering off from recovery I was given an option to disable stock recovery and now it's all as intended.
THANKS!
Click to expand...
Click to collapse
You are welcome.
Ch3rub said:
So I tried the above but have same thing happening.
Everything looks as if it's working OK. Odin picks up the phone, I load the image in PDA.
Have Auto Reboot and F.Reset Time enabled (only).
I hit the start button and it's VERY fast - literally few seconds and I get blue RESET! in the top box in Odin.
What's interesting is that after another two minutes Odin will change to PASS!
But that's looong after my phone booted back to normal operation mode, it will also change to PASS even if I have disconnected my phone
Any suggestions anyone?
==== UPDATE ===
What I also noticed is that after I boot to recovery I'm getting ERROR and NO COMMAND - they will flash on the screen and instead of usual Android Robot I have one on it's side with red exclamation mark over it.
No Command and this point is displayed below the "robot".
This is really irritating
Click to expand...
Click to collapse
I got same problem when i flashed cwm by phil with odin, what i did is to uncheck autoreboot in odin so after odin finish flash recovery image you need to turn off manually by long pressing power button, and then just boot into recovery, reboot system now and select yes disable stock recovery when prompted by cwm.
Sent from my GT-I9205 using XDA Free mobile app
This does not work for me?
SPH-L600 (Sprint) Galaxy mega
Android: 4.2.2
Baseband: L600vpubne4
Build: KOT49H.L600VPUBNE4
Please help, my S3 suddenly stuck at Samsung Galaxy S3 GT-1900 screen. Tried to press Home & Vol Down buttons together but no response.
Plug it in, hold just the power button for 10-15 seconds. If no response it's dead. If you get the samsung logo you should be able to get download mode so long as your volume keys work.
Beamed in by telepathy.
shivadow said:
Plug it in, hold just the power button for 10-15 seconds. If no response it's dead. If you get the samsung logo you should be able to get download mode so long as your volume keys work.
Beamed in by telepathy.
Click to expand...
Click to collapse
Hi Shivadow,
I have entered the the ODIN MODE.. then I'm stuck again at "Downloading... Do not turn off target!!!".
What will I do next. Thanks.
Dhongski said:
Hi Shivadow,
I have entered the the ODIN MODE.. then I'm stuck again at "Downloading... Do not turn off target!!!".
What will I do next. Thanks.
Click to expand...
Click to collapse
I tried downloading S3 firmware & Odin3.. but I always get Failed status. Please see below.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNK1_I9300SVZGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help please. thanks.
Corrupt or locked bootloader or firmware mismatch (device or carrier). Are you sure you have an I9300?. Check the sticker inside the battery compartment. Make sure it has I9300 on it.
If it is definitely an I9300 then I'd go with corrupt or locked bootloader. Is the device locked to a carrier?. Are you sure that the firmware is the correct one for your carrier?.
Beamed in by telepathy.
shivadow said:
Corrupt or locked bootloader or firmware mismatch (device or carrier). Are you sure you have an I9300?. Check the sticker inside the battery compartment. Make sure it has I9300 on it.
If it is definitely an I9300 then I'd go with corrupt or locked bootloader. Is the device locked to a carrier?. Are you sure that the firmware is the correct one for your carrier?.
Beamed in by telepathy.
Click to expand...
Click to collapse
Awww, I'm sorry, my device is I9305. I tried downloading firmwares for my device and got a PASS status at Odin, but still stuck at Samsung S3 screen after auto reboot. My device also is not locked to a carrier.
Any other options please. Thanks again.
You need to flash the i9305 firmware. I9300 and I9305 are two totally different phones with totally different firmware. What or who on earth made you believe that I9300 firmware would work on an I9305..
That's the equivalent of a man dressing in womans clothing and saying "I didn't realise I don't have a vagina"..
Beamed in by telepathy.
shivadow said:
You need to flash the i9305 firmware. I9300 and I9305 are two totally different phones with totally different firmware. What or who on earth made you believe that I9300 firmware would work on an I9305..
That's the equivalent of a man dressing in womans clothing and saying "I didn't realise I don't have a vagina"..
Beamed in by telepathy.
Click to expand...
Click to collapse
I've already downloaded 2 firmwares for I9305 and used Odin, and I got a Fail status on the first one while the other one I got a Pass but still not working. Do I need to download more firmwares? Do I need to choose what country I have to download even if my device is not locked to a carrier?
shivadow said:
You need to flash the i9305 firmware. I9300 and I9305 are two totally different phones with totally different firmware. What or who on earth made you believe that I9300 firmware would work on an I9305..
That's the equivalent of a man dressing in womans clothing and saying "I didn't realise I don't have a vagina"..
Beamed in by telepathy.
Click to expand...
Click to collapse
I've already downloaded 2 firmwares for I9305 and used Odin, and I got a Fail status on the first one while the other one I got a Pass but still not working. Do I need to download more firmwares? Do I need to choose what country I have to download even if my device is not locked to a carrier?
Sorry this is just my first time to do something on phones, I was just advised by a friend to get help here on this site.
If you get a pass after flashing with Odin, make sure to perform a factory reset before booting the phone for the first timer with the new ROM.
audit13 said:
If you get a pass after flashing with Odin, make sure to perform a factory reset before booting the phone for the first timer with the new ROM.
Click to expand...
Click to collapse
Exactly, but usually you must flash, wipe, flash again to get rid of any old data.
Beamed in by telepathy.
audit13 said:
If you get a pass after flashing with Odin, make sure to perform a factory reset before booting the phone for the first timer with the new ROM.
Click to expand...
Click to collapse
Hi Audit,
How can I get to factory reset option before booting? Thank you.
Try this:
open Odin and uncheck everything excepf f.reset time;
flash the stock ROM;
when you see the word "reset" in the status window, remove the USB cable from the phone, remove the battery, wait about 5 seconds, replace the battery;
boot into recovery mode by pressing the home, volume up, and power button. When the phone starts to boot, let go of the power button but not the home or volume button;
when the phone boots into recovery, perform a factory wipe; and
reboot the phone.
audit13 said:
Try this:
open Odin and uncheck everything excepf f.reset time;
flash the stock ROM;
when you see the word "reset" in the status window, remove the USB cable from the phone, remove the battery, wait about 5 seconds, replace the battery;
boot into recovery mode by pressing the home, volume up, and power button. When the phone starts to boot, let go of the power button but not the home or volume button;
when the phone boots into recovery, perform a factory wipe; and
reboot the phone.
Click to expand...
Click to collapse
Just to add, removing the battery and replacing it may cause the phone to boot automatically. In this case just pull the battery again and when you reinsert it the screen should stay black. If not, keep doing it. THEN you can safely get to recovery.
When you get the blue "pass" in odin the phone should reboot automatically. If it doesn't just wait 10 seconds and pull the cable, then pull the battery or hold the power button for about 20 seconds.
Beamed in by telepathy.
shivadow said:
Just to add, removing the battery and replacing it may cause the phone to boot automatically. In this case just pull the battery again and when you reinsert it the screen should stay black. If not, keep doing it. THEN you can safely get to recovery.
When you get the blue "pass" in odin the phone should reboot automatically. If it doesn't just wait 10 seconds and pull the cable, then pull the battery or hold the power button for about 20 seconds.
Beamed in by telepathy.
Click to expand...
Click to collapse
Hi guys,
I tried again just now to flash with Odin but unfortunately I'm getting a Fail status.. see below..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9305XXUEMKC_2051278_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I think my phone is completely bricked because previously it is showing battery charge when i plug it in but now the screen shows zigzag white & gray colors. Anything else I can do? Thanks again.
Try another *good quality* usb cable. * = not a cheap crap cable, one supplied with a device.
As the last port to call, flash a pit file for your specific model.
In all honesty I'll tell you that the pit file may break your phone permanently (most likely) or it could just as easily fix it. The partition information table is "missing" and usually indicates hardware failure. The 'fuzzy screen' is another indicator of a totally buggered phone.
Beamed in by telepathy.
Hey guy,
SM-G925F is my Galaxy S6 Edge model. The phone is stucks on first boot logo and I cant turn the phone off, unless the battery discharges. I can enter the download mode but in odin the process doesnt want to go further that this :
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3604 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
It stays on that and nothing happens. I cant enter recovery while holding the buttons for it (up, home n power). Tried in Kies "Firmware upgrade and initialization" but it ask for the Serial number which I dont have (I dont have the box of the phone anymore). I might be able to find the IMEI but would it work instead the serial number?
Any ideas what else to try? The phone was working fine, I fall asleep with it and when I woke up it was stuck on the booting logo, no idea what I could have done to it.
Thanks n advance
$$ [email protected] ViNcI $$ said:
Hey guy,
SM-G925F is my Galaxy S6 Edge model. The phone is stucks on first boot logo and I cant turn the phone off, unless the battery discharges. I can enter the download mode but in odin the process doesnt want to go further that this :
It stays on that and nothing happens. I cant enter recovery while holding the buttons for it (up, home n power). Tried in Kies "Firmware upgrade and initialization" but it ask for the Serial number which I dont have (I dont have the box of the phone anymore). I might be able to find the IMEI but would it work instead the serial number?
Any ideas what else to try? The phone was working fine, I fall asleep with it and when I woke up it was stuck on the booting logo, no idea what I could have done to it.
Thanks n advance
Click to expand...
Click to collapse
Which version odin? Are you trying to flash stock?