Help needed . Mango is rooted and bootloader unlocked . as the installation instruction say , flashed the .img file , went into recovery , cleared the necessary things . selected zip installation and selected the file . the file opens but I get a message " Installation Aborted " .
Please suggest me possible solutions for the same .
ss2taj said:
Help needed . Mango is rooted and bootloader unlocked . as the installation instruction say , flashed the .img file , went into recovery , cleared the necessary things . selected zip installation and selected the file . the file opens but I get a message " Installation Aborted " .
Please suggest me possible solutions for the same .
Click to expand...
Click to collapse
Hmmm....in recovery do this....
1. Full Wipe/Factory Reset
2. Wipe Cache
3. Wipe Dalvik Cache
4. In Mounts And Storage, Format....
a. System
b. Data
c. Cache
5. Flash The Rom
6. Flash Gapps
7 Reboot into System....
dfdf
Related
Hey Guys
I have FXP132-cm9 installed on my device. But since I installed this, none of the new FXP 133-cm9/cm10 nor FXP 134-cm9/10.
I flashed the ROM from recovery, flashed gapps, wipped the caches. Then rebooted into fastboot and flashed the kernal. Then on reboot it just gets stuck FreeXperia logo and never goes past that.
Then if I reboot into recovery again and try to flash the ROM again, it gives me an error 7. assert failed. L26a, L26i, nozomi. Then none of the ROMS work. I have to restore from previous backup in order to get my device working again.
Any ideas on what I can do?
Thanks
Assert fails because you may format /system. It causes product name to be removed. Next time avoid doing this.
For this time, extract updater-script from the zip, remove the assert command and then replace the old updater-script.
Sent from my LT26i using xda premium
tot_anusak said:
Assert fails because you may format /system. It causes product name to be removed. Next time avoid doing this.
For this time, extract updater-script from the zip, remove the assert command and then replace the old updater-script.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Ah ok. That makes sense. Thanks for the feedback.
I did manage to get it working. I first flashed the boot.img, then installed the rom and cleared dalvik cache, then it working perfectly fine.
NightStalkerDNS said:
Ah ok. That makes sense. Thanks for the feedback.
I did manage to get it working. I first flashed the boot.img, then installed the rom and cleared dalvik cache, then it working perfectly fine.
Click to expand...
Click to collapse
Hello, could you please post the steps you took when updating? I've tried tons of methods now and always get stuck on the FXP logo...
Gorestav said:
Hello, could you please post the steps you took when updating? I've tried tons of methods now and always get stuck on the FXP logo...
Click to expand...
Click to collapse
> First make a nandroid! IMPORTANT
> Flash Bin4ry's recovery image <here> (Instructions in thread)
> Reboot phone and it will automatically boot into recovery
> Format /system
> Wipe data/factory reset
> Wipe Dalvik Cache
> Flash ROM
> Flash GApps
> Reboot and let the initial setup take place (Not sure whether this is necessary but just do it to be safe)
> Reboot into recovery
> Go into backup and restore, choose advanced restore, select your backup and select restore /data
> Finally reboot and you should be upgraded with all your data preserved
Click thanks if I helped, if it goes wrong just restore from your nandroid backup
At the step from the guide above where i'm about to restore my /data I get an error message like this:
Code:
E:format_volume: make_extf4fs failed on /dev/block/
Anyone have a solution?
THANKS
CM & FXP = lost radio signal
Gorestav said:
Hello, could you please post the steps you took when updating? I've tried tons of methods now and always get stuck on the FXP logo...
Click to expand...
Click to collapse
The steps I did to upgrade is this:
- Download the FXP version you want. (If on Xperia S, make sure its the nozomi one)
- Extract the zip file to any directory on your PC and also copy the zip file to your SDcard
- Shut down your device
- Boot into fastboot (Hold the volume up key while putting usb cable in. Blue LED will come on and nothing else
- Open command prompt or terminal and navigate to the adb directory
- Flash boot.img via fastboot: fastboot flash boot ~/Path/To/boot.img
- Then disconnect the device from the host machine and boot into recovery
- Flash zip from SDCard, select zip put on above
- Flash gapps
- Wipe dalvik cache and nothing else
You should be able to reboot the device now without any issues. And all your existing apps and settings will still exist as you had it before if you are upgrading from previous FXP version.
Good luck
fareeed said:
> First make a nandroid! IMPORTANT
> Flash Bin4ry's recovery image <here> (Instructions in thread)
> Reboot phone and it will automatically boot into recovery
> Format /system
> Wipe data/factory reset
> Wipe Dalvik Cache
> Flash ROM
> Flash GApps
> Reboot and let the initial setup take place (Not sure whether this is necessary but just do it to be safe)
> Reboot into recovery
> Go into backup and restore, choose advanced restore, select your backup and select restore /data
> Finally reboot and you should be upgraded with all your data preserved
Click thanks if I helped, if it goes wrong just restore from your nandroid backup
Click to expand...
Click to collapse
Here to confirm that this method works for me after trying so many different ways to get it to boot. Thanks!
Hey guys! i have a problem every single time i try to install this rom.
1. I flash via flashtool the 6.1.1.B.1.54 ftf
2. I root my phone and install a CWM (LockedBootloader)
3. I copy the TheBrainsRom_v08 in internal storage (after copying META.inf and boot.img from TheBrainsRom_ICS03_lockedBL)
4. I boot into recovery
5. Install zip from sdcard -> choose zip from sdcard -> TheBrainsRom_ICS08_slim.zip -> Yes Install.
6. After installation i select Wipe cache partition -> Yes wipe cache.
7. I select advanced and i do wipe dalvik cache.
8. After doing that i select go back and at the main menu of the recovery i selectg reboot system now. I see a message saying ROM may flash stock revovery on. THIS CAN NOT BE UNDONE.
What i am i suppose to do now? When i click yes i just see the Sony logo for more than 1 hour. What i am i doing wrong?
Thank you and sorry my bad english.
Hi, im using v8 with 6.1.1.B.10 baseband. As far as i know v9 is for .54
You dobt need to use the locked method of v3
Simply flash stock 6.1.1.B.10
Root and install cwm
Enter cwm
Flash v8
Wipe cache and dalvik (also data if you wish, still not mandatory)
Reboot twice
Done
Sent from my ST25i using xda app-developers app
DaRk-L0rD said:
Hey guys! i have a problem every single time i try to install this rom.
1. I flash via flashtool the 6.1.1.B.1.54 ftf
2. I root my phone and install a CWM (LockedBootloader)
3. I copy the TheBrainsRom_v08 in internal storage (after copying META.inf and boot.img from TheBrainsRom_ICS03_lockedBL)
4. I boot into recovery
5. Install zip from sdcard -> choose zip from sdcard -> TheBrainsRom_ICS08_slim.zip -> Yes Install.
6. After installation i select Wipe cache partition -> Yes wipe cache.
7. I select advanced and i do wipe dalvik cache.
8. After doing that i select go back and at the main menu of the recovery i selectg reboot system now. I see a message saying ROM may flash stock revovery on. THIS CAN NOT BE UNDONE.
What i am i suppose to do now? When i click yes i just see the Sony logo for more than 1 hour. What i am i doing wrong?
Thank you and sorry my bad english.
Click to expand...
Click to collapse
-v8 is for B.1.10 firmware, not for B.1.54
-Don't do point "3" of your list, not needed anymore
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
prds359 said:
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
Click to expand...
Click to collapse
Okay so here's a solution
1. Download flashtool first from here
2. Download ICS stock ftf from here
3. Now flash the ftf to your phone in FlashMode, when connected to PC
if any further query, let me know
Happy Flashing
thank u so much @Sangeet007 .. solved my purpose
Having another problem ..
didn't want to create another thread for this ..
so continuing here ..
Rooted completely & unlocked boot-loader of my wt19i ..
but CM 9.1 isn't installing ..
trying to flash it from CWM & it's showing
"E: Error in/sdcard/cm-9.1.0-coconut.zip
(Status 7) Installation aborted."
help needed ASAP ..
seems like if we don't create new thread, no one's going to notice !!!! :'(
HELP needed here ! please .!
Download the rom again and transfer it to your phone. Flash the kernel from inside the rom.zip, then flash the rom after performing wipe data/factory reset and wipe cache
Sent from my Nexus 4 running Android 4.3
facing the same problem! can it be done with any software like flashtool or such?
prds359 said:
facing the same problem! can it be done with any software like flashtool or such?
Click to expand...
Click to collapse
No, you have to flash it using cwm
Could it be you wiped /system before flashing? Because you shouldn't do that!
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
prds359 said:
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
Click to expand...
Click to collapse
After wiping delvic cache did u frmat the system ,data ,cache which located in the advanced tab ???
can u gve me the link that the rom ur trying to install??
*first flash the recommended kernal
*Wipe Data/Factory Reset
*Wipe Cache Partition
*Wipe Dalvik Cache
*Go to Mounts & Storage
*Format Data
*Format Cache
*Format System
*Install zip from sd card
**if isnt work this again please try to install anyother rom and see what happen ...
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
prds359 said:
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
Click to expand...
Click to collapse
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
mihahn said:
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
Click to expand...
Click to collapse
did exactly what was described to your link to flash the kernel ..
it was successful.. but my phone is stuck to the Logo when am trying to turn it on ..
another problem is, in CWM menu the back key (power button) isn't working at all ..
what should i do next?
have attached the error screen.
Then flash a another kernal ,stuck on the logo happens coz the flashed kernal didnt support very well for ur android version.
Sent from my WT19i using xda premium
can you please suggest me a good ROM & kernel for WT19i please?
i was trying CM 9.1
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Arrow11 said:
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
prds359 said:
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
Click to expand...
Click to collapse
when sony logo appears plz start to press vol- rapidly..u can acces to recovery there..in there u can mount ur sd card using mount and storage option .if u cant acces to recovery u should flash this kernal http://forum.xda-developers.com/showthread.php?t=1398910
i recovered most of 4ns using rege kernal
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
prds359 said:
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
Click to expand...
Click to collapse
Flash the stock rom in flashmode using flashtool. If you don't know how to do that, use the search
Sent from my Nexus 4 running Android 4.3
I have the x920, rooted , added autocwm recovery,
Found rom on needrom, download on SD
Reboot in recovery
Clean data/fasctory reset
Clean cache partition
Clean dalvik
Install zip
Opening but it stops and says aborted !
What am i doing wrong ?
arletroost said:
I have the x920, rooted , added autocwm recovery,
Found rom on needrom, download on SD
Reboot in recovery
Clean data/fasctory reset
Clean cache partition
Clean dalvik
Install zip
Opening but it stops and says aborted !
What am i doing wrong ?
Click to expand...
Click to collapse
How fix my driver problem
My phone reset in logo, charge normal
SPFT no auto flashing
Charge mode:
SCI General U2S(AT) (COM:30)
SCI Vendor U2S(DIAG) (COM:36)
Vol+ and plug USB
SCI USB2Serial (COM:50)
This is good driver ?
Please frieng how fix error
Hi. this is Andy. may i have yous help for ROM flashing?
i try to flash my rom yesterday but not success. i updated the recovery with CMW and saved the rom (zip) in sdcard. and i process the flashing. cause error and couldn't go ahead and abort the process automaticall. i try another rom but got the same result.
finally i can't turn on my phone. just stay on samsung logo screen. i used with odin and flash a mds5 file for recover is fine. but i found that odin can't input a zip file. all are tar or mds5 file.
Am i have some step wrong or missed? did yours have a step by step and show me how to do??
may i have all yours help??
thanks in advance !!!!!!
Hi you,
I usually use these steps below to flash ROM
1. Use Odin to flash CWM that is compatible with your new ROM
2. Copy your new ROM into phone sdcard
3. Boot into CMW, wipe data/factory cache, wipe davik cache
4. Flash your new ROM and reboot.
Hope this help.
porcupinesoft said:
Hi you,
I usually use these steps below to flash ROM
1. Use Odin to flash CWM that is compatible with your new ROM
2. Copy your new ROM into phone sdcard
3. Boot into CMW, wipe data/factory cache, wipe davik cache
4. Flash your new ROM and reboot.
Hope this help.
Click to expand...
Click to collapse
Thanks in advance, i will try that and update you again. thank you very much.