[Q] No charging indicator. (4.4.2) - Sony Xperia Z Ultra

When I turn off the phone and connect with the magnetic/usb plug, the charge works but I don't see displayed any the level of charge (only a battery logo). Only notify led Red to Green and nothing.
It's normal?

Related

Led on while charging

hi guys,
this really is one of those "first world problems", but it is bothering me indeed..
I noticed that the "charging" led only comes on when the phone is plugged in but turned off.
I'd like for it to always be on while charging, whether turned on or off, and ideally for it to change color once charge has reached 100%.
Tried Light Flow, but doesn't seem to work.. any ideas?
I'm using lightflow and its working fine for me. It flashes orange while charging and green when it reaches 100%. It only flashes phone screen is locked though.
My charging LED does not come on at all when plugged in.....
For the record, when mine is powered off and plugged in I get the Battery display with a cool liquid filled battery as well as a notification light.
its a motorola thing. When ur device is on and charging the led light won't be on. Its the same on the xoom. Unless until some dev makes a custom kernel

[Q] Z Ultra won't charge with LED red light turned on.

I updated the day before yesterday my C6833 with CM nightly cm-12-20150222-NIGHTLY-togari.zip.
and forgot charge, battery was empty.
Then Problem appeared.
During connecting any charger, Led turned on with red light. but, it won't charge.
I tried all thing i know.
Reset with power button + volume up, vibrating, connecting charger whole days. but not charge.
sometime, it showing charging display (battery charging animation).
......then it not increased from 1%, time passed about 10 minutes, battery went to 0%, it turned off. and again led red light turned on.
Can somebody help me?
Did you try putting it in download mode and putting stock ftf
I had the same.
Plugged it into computer while pressing vol up, got blue led. Used flashtool to put a kernel on it. It worked. Disconnected but remained charging. Flashed a ROM from recovery.

Archos 80 g9 wont charge if powered off

Hi Everyone,
My Archos 80 g9 tablet wont stay on. Firstly it hasnt used for months. (1 .I put it to charge and green light started blinking, after some minutes it stopped and remains steady then it powers on. When just on Android, charging lvl says : Charged,...then in a sec,....connect charger. then starts shutting down and displays an message "CAUTION: Device wont charge if powered off"==>Powers off, Green light is off .1) . When i remove and plug in charger again does the same thing in (1).................THANK YOU.
This is from the online user manual : Note the over discharged paragraph. Hope this helps ! After the charging indicator's blinking, let your tablet charging for few hours.
IMPORTANT: When the battery is completely empty and you plug in your device,
- The charging indicator light will turn on then start to blink within few seconds. The indicator light blinking rapidly means that the device is charging but does not yet have enough power to start. This charging when off may take some time. Once the device has charged enough to start, it will switch on and display the ARCHOS boot logo. You can use the device whilst charging.
- If the charging indicator does not blink after few seconds, it could mean that the battery is over discharged.
1. Plug out the power supply.
2. Press 10 seconds on the On/Off button for a hardware reset.
3. Plug in the tablet to the power supply.
After a certain period (few minutes or one hour), the charging indicator starts blinking.
Click to expand...
Click to collapse
BlackGunZ said:
This is from the online user manual : Note the over discharged paragraph. Hope this helps ! After the charging indicator's blinking, let your tablet charging for few hours.
Click to expand...
Click to collapse
I have tried to let it charge for more than 1 hour and it does the same loop, again and again, like :charge for 2mins , power on, powers off, and recharges again and again. Also I have tried the 10sec reset too.
Thank You

Red light blinking, phone does not charge

Hi guys,
I lost my Note4 so i foung my X10i that i havent used for 4 years.
I bought a new SE battery and put phone on charger overnight with a 2A charger. When trying to switch on the phone red light blinks only.
So i read some threads and saw that u must take out the battery and connect phone to charger then put battery back in, when i do that a green light shows and battery indicator shows battery is full then phone boots, but switches off again after 5 seconds when it has done booting and showing wallpaper. Last i remember i was on a custom ROM.
When i try to swithc on the phone normally the ed light flashes again
I suspect its a software issue, what must i do?

Z5C Nougat(0.376) not getting charged even after the charger is detected

Z5C Compact is not charging or won’t boot up, Any help and suggestion Appreciated.
I have a Z5C Coral Brought from Malaysia(4 months ago) It is running the Australia Nougat Firmware 0.376.Yesterday and today I’m unable to charge my phone. Charger is getting connected, but phone is not getting charged. In Ampere(App) it shows USB Charger is connected but charging is Minus value (ex: -330mA).
Now the phone is 0% and I cannot boot the phone. When I plug the charger in it led shows red>green >blank and green stays on as long as you plugged the charger.
If I remove the charger the device will boot Sony logo >battery with red empty sign, then off or led blink red 3 times.
I tried connecting phone in different quick, 1500mA, 2000mA chargers, desktop, laptop USB2 & 3 port for few hours. But phone is not getting charged or booting up.
Thanks in advance for your help
UPDATE
I tried leaving the phone in charging mode green light for an hour (as mentioned in the above post.)
And the phone booted up in 14% charge. I did some backups and phone was shut down at 0%.
Now when I plugin the charger its showing red led> Charging with a Lightning bolt> then stays in red led for few mins> Then boots up with sony logo and then its > shows battery empty with 0%.
This cycle is repeating

Categories

Resources