Hi for everyone!
First at all i want to apologise for my bad english.
Now, I want to know if you can help me.
This is the history:
I had a phone flashed with cm-7.2.0-20130125-STABLE-ajay-sdext.zip and it was working.
One day the phone begin in a boot loop.
So, I decide to flash a Stock Rom, but something stranger happens.
When i flash whit odin the rom I5510LVCKPI_I5510LVNOKP5_VNO.zip I see:
ODIN:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/9 Finished.
<1> qcsbl download..
<1> 2/9 Finished.
<1> oemsbl download..
<1> 3/9 Finished.
<1> amss download..
<1> 4/9 Finished.
<1> arm11boot download..
<1> 5/9 Finished.
<1> boot.img download..
<1> 6/9 Finished.
<1> recovery.img download..
<1> 7/9 Finished.
<1> system.rfs download..
<1> 8/9 Finished.
<1> csc.rfs download..
<1> 9/9 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.​The phone reboots start to applying updates and...
Error:Can't Mount /Data Partition
reboot and boot loop again.
What happened?
Thanks,
Martin
@Dr. Cooper do full factory reset this is useful if you will experience boot loops after flashing.
@Ansh2000, thank you for your reaply.
I can't do that because I can't enter to recovery mode.
Only have Downloaded mode and Emergency.
Enviado desde Android
Dr. Cooper said:
@Ansh2000, thank you for your reaply.
I can't do that because I can't enter to recovery mode.
Only have Downloaded mode and Emergency.
Enviado desde Android
Click to expand...
Click to collapse
flash stock rom again using Odin after flashing remove battery and then insert battery press power and t button .
Yes I do that.
I flash the stock rom mentioned above, then Odin send reboot, when booting star tu apply some updates and fail whit error /data partition.
I observe the message in Odin "big partition size" this is normal?
How can I repartition?
Enviado desde Android
Dr. Cooper said:
Yes I do that.
I flash the stock rom mentioned above, then Odin send reboot, when booting star tu apply some updates and fail whit error /data partition.
I observe the message in Odin "big partition size" this is normal?
How can I repartition?
Enviado desde Android
Click to expand...
Click to collapse
Nothing related to re-partitioning.
Just relax...This is a common problem.
Your /cache and /data partitions are ext4 due to CM but stock ROM requires them to be rfs. So, before flashing stock ROM in our galaxy5, we use a "gti5500-rfs-downgrade.tar" file and flash it. Just wait for a few moments until I get one for your device. Stay tuned.
Thank you very much @Bhargav97 !
[email protected]
Related
sorry of my bad english, i am russian...
i am tested at 2.3.4 XXKPH and XXKPH Coderom too////
For me problem here what... Before noticed in 2.3.3 too...
For example begin to listen music is a second 2 - 30 secs. begin to brake a sound, then at once music is turned off and beats out a record player on a main screen, similarly and in market but there after the search of appendix open a page with the found application pair of seconds and knocks out on the main screen of market
You need to flash a multi file 2.2.1 rom first, because they are the only ones that include the first and second stage bootloaders (the APPBOOT tar.md5).
The only one I know of is S5830JPKC2.
Download from here:
http://www.samfirmware.com/WEBPROTECT-s5830.htm
Is the second arabic one.
Then you can flash any rom you like.
to ilarrain
so i must flash S5830JPKC2 first, and after the coderom?
oh my god... i have a brick....
flashing with odin S5830JPKC2
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss download..
<1> 1/5 Finished.
<1> boot.img download..
<1> 2/5 Finished.
<1> recovery.img download..
<1> 3/5 Finished.
<1> system.rfs download..
<1> 4/5 Finished.
<1> csc.rfs download..
<1> 5/5 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
<2> Added!!!
<2> Detected!!!
<2> Disconnected!!!
<2> Detected!!!
<2> Disconnected!!!
<2> Detected!!!
and they must reboot but nothing.... they are brick....
when connect phone with usb. odin see com port but
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
and nothig....
Koldunchik said:
oh my god... i have a brick....
flashing with odin S5830JPKC2
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss download..
<1> 1/5 Finished.
<1> boot.img download..
<1> 2/5 Finished.
<1> recovery.img download..
<1> 3/5 Finished.
<1> system.rfs download..
<1> 4/5 Finished.
<1> csc.rfs download..
<1> 5/5 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
<2> Added!!!
<2> Detected!!!
<2> Disconnected!!!
<2> Detected!!!
<2> Disconnected!!!
<2> Detected!!!
and they must reboot but nothing.... they are brick....
Click to expand...
Click to collapse
read this http://forum.xda-developers.com/showthread.php?t=1071970
that should resurrect your phone.
princenoob said:
read this http://forum.xda-developers.com/showthread.php?t=1071970
that should resurrect your phone.
Click to expand...
Click to collapse
Oh thanks it realy help me...
Koldunchik said:
Oh thanks it realy help me...
Click to expand...
Click to collapse
LOL, good to know that it helped, just posting THREAD no searching(sorry, but search before you making the new thread), not very nice. But of course we all try to help!
OK I SOLVED IT
Hi help me my phone is stuck at download mode now when i pull the battery and start the phone or whn i try to get in recovery mode ma getting phone and pc connection logo help its urgent btw i was on KPN and GR1.2
i wanted to switch to GR1.3 and this happend while flashing KPO
NOTE i CAN ACCESS DOWNLOAD MODE
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
When I Flash KPH/KPB phone Boots Up and If I Flash Any Other KPN/KPO/KQ5 even with Full Pacage Phone Stucks At mibib download
My guess is your flashing wrong somehow. There should be no problem if it will run some fine. I do get an issue with some roms stuck on boot screen. I get round it by flashing with 2.2.1 then flashing to 2.3.3/4
Sent from my MY-Ui Mint internet edition powered galaxy ace!
Hello, everyone.
I want to downgrade my galaxy ace from Gingerbread 2.3.5 to Froyo 2.2.1, but when i flashed it via Odin V.4.38, the flashing status was:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss download..
<1> 1/5 Finished.
<1> boot.img download..
<1> 2/5 Finished.
<1> recovery.img download..
<1> 3/5 Finished.
<1> system.rfs download..
<1> 4/5 Finished.
<1> csc.rfs download..
<1> 5/5 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
Now, the Ace doesn't recover and when i press the key combination, this message appears:
Mode RAMDUMP
(ARM9)
I don't understand what big partition size means, i suppose that's the trouble. But i don't know what to do.
Also, when the flashing process is on Close serial port and wait until rebooting. the ACE turns off without rebooting and exits downloading mode.
So, I can't save my ACE.
Is there any solution ?
Thanks.
PD 1. I have already read this forum about ACE unbricking but the solution is not functioning in my phone.
PD 2. The ACE doesn't turn on and i've repeated the flashing process without any signal.
Maybe this will be helpful:
http://forum.xda-developers.com/showthread.php?t=1174163
If you cant get it into download mode/recovery(for restore), the only road is the road to a Samsung servicecenter.
Cheers
egmont said:
Hello, everyone.
I want to downgrade my galaxy ace from Gingerbread 2.3.5 to Froyo 2.2.1, but when i flashed it via Odin V.4.38, the flashing status was:
Click to expand...
Click to collapse
The log (big partition size) is absolutely normal while flashing a new rom, with Odin.
Can you make your Ace go into downloading mode?
happily1986 said:
Can you make your Ace go into downloading mode?
Click to expand...
Click to collapse
Yes, it only goes into Download mode, but the others mode not !
from that log, u have successfully flashing ur phone, it should reboot into the new fresh rom after that. and "big partition size" log is normal, that message appear even when flashing stock rom.
and i think u got into that ramdump mode is because ur pressing the wrong button combination.
Code:
vol down+home+power=download mode
home+power=recovery mode
if u can go into recovery mode, try to wipe data/factory reset.
egmont said:
Yes, it only goes into Download mode, but the others mode not !
Click to expand...
Click to collapse
First I would try to make a factory reset, and than if this won't work, I would try flashing again a new rom. If download mode is working I guess you're good to go.
I unbricked my phone with docking the motherboard. Did it at my brothers work at samsung :3
Sent from my GT-S5830 running Miui
Hi
I tried to install Arkas 1.2.1 Ganymede 4 custom ROM with Odin but my device doesn't reboot again
I tried to install PerseusXJ but same thing happens. pls help me
sry for my bad English
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> boot.img download..
<1> 1/4 Finished.
<1> recovery.img download..
<1> 2/4 Finished.
<1> system.rfs download..
<1> 3/4 Finished.
<1> data.rfs download..
<1> 4/4 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Solved- i dont remember how but my device is working now :laugh:
I'm on Custom Rom "The Ultimatum" http://forum.xda-developers.com/showthread.php?t=2234221
Used for about 21 hours (Including Standby time) The Phone was turned off being emtyness the battery.
I'm Turned on the phone during the battery being weak....
And the display/screen only show the light flashing, doesn't show boot anymation... only the light with Blank screen No samsung logo and no sound ....Like flickering light...... Until the battery completely empty and the phone was turned off automatically cos' All the phone switches/button did not function.
Plug the phone to Charger.... The Display/Screen still same Doen't Show battery status or any ... only the light with Blank screen Like flickering light...... Screen on... Screen off... on.... offf....
keep in charger about 2 hours
After that,... i replace the battery... insert and swich the phone On ... still same.... doesn't start and doesn't show bootloading
Problem
1. Phone dosen't show boot animation
2. Can not go to CWM/ Recovery Mode when press Power and Home
Download Mode Still no Problem it's ok
The action that has been carried out
1. Flashing Firmware Again Via Odin Multi Dowloader v4.42
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/9 Finished.
<1> qcsbl download..
<1> 2/9 Finished.
<1> oemsbl download..
<1> 3/9 Finished.
<1> amss download..
<1> 4/9 Finished.
<1> arm11boot download..
<1> 5/9 Finished.
<1> boot.img download..
<1> 6/9 Finished.
<1> recovery.img download..
<1> 7/9 Finished.
<1> system.rfs download..
<1> 8/9 Finished.
<1> csc.rfs download..
<1> 9/9 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
Still get the same Problem the phone doesn't start can not go to recovery mode
Thank you for XDA and for All
Sory for my bad english
O.... sorry i forget... i mint samsung galaxy ace gt-s5830 doesn't show samsung logo on start