Hello XDA
I am a kind of newbie. I followed the post given here, except I used Pollux (instead of Pollux_windy). I tried with latest Ubuntu touch image trusty-preinstalled-touch-armhf.zip.
But after installation process, (as given in the above instructions), I rebooted the system from recovery. What I can see is only a black screen which follows Sony logo. I find a similar problem here by Ry Chy.
Please help me.
kalindu said:
Hello XDA
I am a kind of newbie. I followed the post given here, except I used Pollux (instead of Pollux_windy). I tried with latest Ubuntu touch image trusty-preinstalled-touch-armhf.zip.
But after installation process, (as given in the above instructions), I rebooted the system from recovery. What I can see is only a black screen which follows Sony logo. I find a similar problem here by Ry Chy.
Please help me.
Click to expand...
Click to collapse
Seems latest builds are not working. Tried with very early ubuntu image and it was ok. Waiting for stable image.
Related
Hi, my father has a Telechips 8902 based tablet (It's absolutely horrible!)
I decided I would put CM7 on it for him using the build at http://androtab.info/telechips/firmwares ..
I flashed it through Fastboot, however CM won't boot at all.. Just stays at the Android boot animation,
I've already tried formatting the data partition to no avail..
I've ran and uploaded logcat to http://pastebin.com/q4fdWfT7 and continues at http://pastebin.com/3xcia9Qs
Could someone who knows what they're doing have a look and see if they know whats wrong?
I'll be eternally grateful
Thanks
Greeting all.
As said, I have bricked my one day old phone.
http://www.aliexpress.com/snapshot/230332055.html
I accidentaly flashed it with wrong rom (it was late and didn't read).
Now when i try to flash it, i get this message:https://www.dropbox.com/sc/5cdxl6cdemcbvra/MkG1w84hHd
If anyone has the solution or know how to help me, I would appreciate it.
I wanted to flash it because my sim card didnt catch any signal (thinking that flashing could resolve the problem).
Flashed with this rom (not correct):http://www.needrom.com/mobile/star-x920e-6/
Should flash with this one:http://www.needrom.com/mobile/star-x920e/
Thank everyone in advance.
Sloution found.
Big thanks to dorschdns from chinamobiles.org
This is the solution:
1. Please load this Rom first:
http://www.needrom.com/wp-content/up...ROOT_V0401.zip
2. Download now this ROM:
http://www.needrom.com/wp-content/uploads/2013/05/ML_20130423_STAR_X920_ROOT_LDv0404.zip
""" when you flash click on UBOOT and selected "LK_CD2.bin" and flashed """"""
you will flash only this image now!!!
Good luck!:good:
Repost Links.
jsain said:
Sloution found.
Big thanks to dorschdns from chinamobiles.org
This is the solution:
1. Please load this Rom first:
needrom /wp-content/up...ROOT_V0401.zip
Hi, can you re post the 1st link, its not complete. Thank you.
Click to expand...
Click to collapse
Hello, I have a bricked x920 but e2001v21_v89_zlh_hd version, I tried everything but cant find solution.
I'm trying to flash using windows 8 but, I tried this rom but I still got "enable DRAM failed" as in the 1st post.
Any solutions?
Hi guys,
After flashing different Recovery ROMs I've finally bricked Star (Tengda) x920 8Gb device by flashing ROM from this link needrom.com/mobile/star-x920e-6/
Now when connecting it to Windows 7 x64 SP1 computer it is recognized as "MT65xx Preloader" device and after a few seconds disconnects itself. It connects/disconnects seems like forever.
I have installed driver for this device, but behavior stays the same. I've tried Mini Windows XP (x86) SP3, behavior stays the same.
What could be possibly done to recover device?
Please be patient, noobie here
UPD: This was resolved via video posted on needrom.com/mobile/star-x920e-6/ page.
star x920 flashing
I have the x920, rooted , added autocwm recovery,
Found rom on needrom, download on SD
Reboot in recovery
Clean data/fasctory reset
Clean cache partition
Clean dalvik
Install zip
Opening but it stops and says aborted !
What am i doing wrong ?
does anyone have the oem room of the star x920Q?? i cant fine it anyware...
somebody had this rom??
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
arngrim said:
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
Click to expand...
Click to collapse
did you find a solution ?
arngrim said:
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
Click to expand...
Click to collapse
Same problem here with the exact model. Any solutions? Thanks
Hello ! I'm new here and apparently I can't find the right section for my thread, I hope this is the right one, if not I'm very sorry.
I have a Jiayu G3 that won't boot in Android and apparently not in CWM either. I kinda did a lot of "upgrades" so please bare with me , here it goes (I just wanted to upgrade it to Jelly Bean).
I originally had 4.0.3 (stock/unrooted) then I rooted it using Binr4y's root method. Then I "installed Jelly Bean" from this video and then it started a boot loop then went on and on so I tried another rom and found this one RAW MOD B3, this one didn't worked either still looped on and on, so I tried finding a fix and came up with this Lewa Recovery 2.0 for JIAYU G3 so I flashed Lewa Recovery image with CWM and now to my surprise I can't even boot to CWM anymore.
I also installed before the Lewa Recovery Flash, White Google Logo.
So now my situation is kinda like this:
- I should have RAW MOD B3.
- I can't boot into Android it loops on and on at the logo.
- I can't boot into CWM either it also loops on and on.
- I don't really know how to boot into TWRP or Lewa.
Any help small as it is, is very much appreciated. Thank you for taking your time and reading about my problem and once again sorry if I have posted in the wrong section.
Solved
I fixed my phone, I went to some people who repair android phones it cost me 20$ (not much), they said that the USB method wasn't working so they tried with a device called BOX from Samsung who apparently rewrites the rom. It works as in the first day, also I don't see any screws being used to I think they didn't need to acces the mainboard, but I could be wrong.
Hello guys! I am very new here. I hope you can help me by any chance. As stated on the title itself I got a Lenovo ideapad K1 getting error such Unrecoverable Bootloader Error (0x0000004). This how it happens before I get the error.
I was currently running Kaschemme's custom rom for lenovo k1, CM10.1(android 4.2.2). I have this tablet where the physical home key is faulty I have read from some Lenovo k1 thread how to fix it. Then tried the method then it worked. The next morning, I used the K1 and its a bit acting up and started lagging then hang's up. I do a force shutdown then tried the method again to make the home key work while booting up until it reaches the homescreen then instatntly hung up. This happened 3x and I used the same previous method every time a boot up the tablet. For that 3rd time it never reached the homescreen I had a series of hanging at the Cyanogen boot animation and did a force shutdown and never tried using the method to make the home key work. After these series of hanging and force shutdown at the bootanimation, now it only boots up until the Lenovo logo and never passed that logo. After that I decided to reinstall Kaschemme's CM10.1 for lenovo k1 by entering to APX mode then when installing and everything was successful waited for my tablet to reboot but NO REBOOT happened, but instead I got the aforementioned error. I even tried to reinstall that same ROM and even, AOSP JB by Khanning, HC stock, HC rooted rom for Lenovo K1 and no luck at all.
Untill now I can't figure out what had just happened and how and why I got that silly error. Hope you guys, Lenovo k1 users especially , can help me specially to Kaschemme who did very good job in supporting the lenovo K1 users.
THANKS in advance
Just in case in the future I might be able to solve this or somebody out there will be kind to help with my problem with my Lenovo k1
Just tonight, I tried to install the ROM CM10.1 by Kashchemme as soon as it reached the last .img to fully installed and before the device should reboot I tried to force shutdown before I see the ERROR message again. When I turned it on it immediatly went to APX mode without pressing the 2 volume buttons together with the power button. I tried to force shutdown it for 3 times and it always went to APX mode. Tried to install Rooted HC by Khanning, it reaches the last .img (userdata.img) to be installed successfully but still no luck and I got the additional information
failed executing command 25 NvError 0x120002
command failure: sync failed <bad data>
bootloader status: Bct Write Failed <code: 22> message: nverror:0x42004 <0x42004
> flags: 0
Pleae help what do these things mean and how can I recover my tablet. Is Jtag possible? how to JTAG this lenovo k1? please anybody share your knowledge. Thanks
My LENOVO K1 is finally alive and working after so many attempts
Just an update
Right after my recent post tried to reboot my tablet. It boots up. The Lenovo Logo showed again and it proceeds and showed the NVIDIA logo then after that another Lenovo logo until it reaches the homescreen. Finally my tablet is FInally ALIVE so happy that I saved my old ROM's which brought my tablet back to life.
Now I don't know if I am running the rooted one or not because I don't see the SUPERUSER app on this HC rooted by Khanning.
If anyone of you might have the same problem with your LENOVO K1 try the way I did. Just read my previous posts. If you have any question that I might able to help jut let me know.
LONG LIVE ANDROID!!!!!
I am having the same issue, while trying to flash Kaschemme's CM10.1 i got the "unrecoverable bootloader error (0x00000004). could you tell me where you got the version of HC that you were able to get running?
trackid said:
I am having the same issue, while trying to flash Kaschemme's CM10.1 i got the "unrecoverable bootloader error (0x00000004). could you tell me where you got the version of HC that you were able to get running?
Click to expand...
Click to collapse
Look for the thread created by Kastella. Another K1 user. I post the link there. Sorry I can't post the link now just using my phone to reply. Hope you understand
Sent from my MT27i using XDA Premium HD app
trackid said:
I am having the same issue, while trying to flash Kaschemme's CM10.1 i got the "unrecoverable bootloader error (0x00000004). could you tell me where you got the version of HC that you were able to get running?
Click to expand...
Click to collapse
Here is the link to that thread
http://forum.xda-developers.com/showthread.php?t=2575775
Sent from my MT27i using XDA Premium HD app
Btw, which ROM where you using before you attempted to flash CM10,1?
Sent from my MT27i using XDA Premium HD app
Thanks, I cant remember exactly which one it was since i flashed it over a year ago, but it was a jellybean Rom made by Khanning.
How to solve the issue?
johnwilliam_a_k_a_trash said:
Hello guys! I am very new here. I hope you can help me by any chance. As stated on the title itself I got a Lenovo ideapad K1 getting error such Unrecoverable Bootloader Error (0x0000004). This how it happens before I get the error.
I was currently running Kaschemme's custom rom for lenovo k1, CM10.1(android 4.2.2). I have this tablet where the physical home key is faulty I have read from some Lenovo k1 thread how to fix it. Then tried the method then it worked. The next morning, I used the K1 and its a bit acting up and started lagging then hang's up. I do a force shutdown then tried the method again to make the home key work while booting up until it reaches the homescreen then instatntly hung up. This happened 3x and I used the same previous method every time a boot up the tablet. For that 3rd time it never reached the homescreen I had a series of hanging at the Cyanogen boot animation and did a force shutdown and never tried using the method to make the home key work. After these series of hanging and force shutdown at the bootanimation, now it only boots up until the Lenovo logo and never passed that logo. After that I decided to reinstall Kaschemme's CM10.1 for lenovo k1 by entering to APX mode then when installing and everything was successful waited for my tablet to reboot but NO REBOOT happened, but instead I got the aforementioned error. I even tried to reinstall that same ROM and even, AOSP JB by Khanning, HC stock, HC rooted rom for Lenovo K1 and no luck at all.
Untill now I can't figure out what had just happened and how and why I got that silly error. Hope you guys, Lenovo k1 users especially , can help me specially to Kaschemme who did very good job in supporting the lenovo K1 users.
THANKS in advance
Click to expand...
Click to collapse
Hi,
I have faced the same problem of Unrecoverable Bootloader Error (0x0000004) with exactly the same situation. However I can't find your way to solve the issue. Could you please teach me the way of solution?
Thanks!
seananyoung said:
Hi,
I have faced the same problem of Unrecoverable Bootloader Error (0x0000004) with exactly the same situation. However I can't find your way to solve the issue. Could you please teach me the way of solution?
Thanks!
Click to expand...
Click to collapse
I think it was just a storke of luck. Because right now after several times of attempt I upgrade my K1 to Kaschemme's Rom my K1 always get bricked. I did it for about 7 times of reviving back to HC. Now my tablet is totally useless. I even tried to do the bake technique but still having error I might try it as well on Sunday. Just keep on pushing the HC and you will able to revive it soon. Good luck.
Sent from my GT-I9500 using XDA Premium HD app
Hi I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet.
After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good.
The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop
Black screen (backlight though)
PWR+Vol up no longer gets to recovery
Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command.
Tried "fastboot flash recovery cwm.img" after wait command, no luck.
Is there anything else I can try?
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Turzyx said:
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Click to expand...
Click to collapse
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
lamkc said:
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
Click to expand...
Click to collapse
I guess this is the site he is refering to:
http://www.goclever.com/uk/support,c3/software-update,a28.html?aic=5&aia=185&ail=10
The LiveSuit pack is there for download, as well as the roms.
But there are three different 4.0 roms to choose from, and also a couple of 2.3 roms. I dont know which one he did use.
Since your Kurio 7 is bricked anyway, I guess you can try one by one and see if any of them work.
Please tell which one, if you succeed.