hello pro guys..
i come from malaysia..
i need some help..
why my phone (i9300) can't odin?
when normal mode ID:COM added!
when download mode ID:COM removed!
this sucks!
many times i try still can't..
BroWan said:
hello pro guys..
i come from malaysia..
i need some help..
why my phone (i9300) can't odin?
when normal mode ID:COM added!
when download mode ID:COM removed!
this sucks!
many times i try still can't..
Click to expand...
Click to collapse
USB drivers correctly installed? Did u confirm the warning message on your phone to enter into the Download mode? Which Odin version? Did u try other versions? Did u run Odin as administrator? And so on...
Primokorn said:
USB drivers correctly installed? Did u confirm the warning message on your phone to enter into the Download mode? Which Odin version? Did u try other versions? Did u run Odin as administrator? And so on...
Click to expand...
Click to collapse
odin3 v3.07 & kies3.. i cannot flash the firmware.. something wrong in my phone bro?
BroWan said:
odin3 v3.07 & kies3.. i cannot flash the firmware.. something wrong in my phone bro?
Click to expand...
Click to collapse
Uninstall Kies and its driver then reboot and install manually the Samsung USB drivers. Reboot again.
Try with Odin 1.85 and other USB ports.
Primokorn said:
Uninstall Kies and its driver then reboot and install manually the Samsung USB drivers. Reboot again.
Try with Odin 1.85 and other USB ports.
Click to expand...
Click to collapse
ok bro! i try.. thanks.. i will asking u again if still can't.. thanks for your advise..
BroWan said:
ok bro! i try.. thanks.. i will asking u again if still can't.. thanks for your advise..
Click to expand...
Click to collapse
You're welcome. Good luck :fingers-crossed:
Primokorn said:
You're welcome. Good luck :fingers-crossed:
Click to expand...
Click to collapse
see this.. still the same.. normal mode & download mode..
BroWan said:
see this.. still the same.. normal mode & download mode..
Click to expand...
Click to collapse
Do u have "do not turn off target..." message on your phone?
New drivers installed and Kies removed? Odin has been launched as administrator? Original USB cale?
Primokorn said:
Do u have "do not turn off target..." message on your phone?
New drivers installed and Kies removed? Odin has been launched as administrator? Original USB cale?
Click to expand...
Click to collapse
developer options - usb debugging = yes!
any idea bro? :highfive:
BroWan said:
developer options - usb debugging = yes!
any idea bro? :highfive:
Click to expand...
Click to collapse
i don't understand.. why? what the thell is going on?
BroWan said:
developer options - usb debugging = yes!
any idea bro? :highfive:
Click to expand...
Click to collapse
OK for the usb debugging but I'm talking about the usb cable and the other points?
Try first Odin 3.09, if it doesn't work you should try Heimdall-frontend, you will find some guide about heimdall
Related
"firmware update encountered an error please use kies to enter recovery mode "
thats whats coming up on my phone after my pc crashed while i was trying to flash a firmware on odin
now odin doesnt see my phone when i put it in download mode and if i try to enter recovery mode i just get
"firmware update encountered an error please use kies to enter recovery "
i have no problem getting my phone into download mode i just cant get odin to see it to be able to flash a firmware .
any ideas or is there a different program i could use to flash a firmware
Go check this threat out.
http://forum.xda-developers.com/showthread.php?t=1457458
Firstly, no offence but please do not create topics with idiotic titles like "help" which do not describe teh topic in any way other then its a newbie thread.
Second use search before creating topics because its a good chance that the thread already exists or question has already been answered.
TheATHEiST said:
Second use search before creating topics because its a good chance that the thread already exists or question has already been answered.
Click to expand...
Click to collapse
i have searched the forums ,my problem is i cant get odin to see my phone and i have tried . i have taken out kies from my pc and kept the drivers for my phone on the pc . so i am just looking for a solution
You need to keep kies on your pc and then use Odin
Tool-kit said:
Go check this threat out.
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i followed this thread and it said to uninstall kies as it sometimes interferes with odin
odin wasnt seeing my phone when kies was installed and still not seeing it with kies uninstalled either
Yes it interferes with Odin. Just open your task manager and quit all tasks related to kies. Kies doesn't like Odin being able to do all the amazing flashing.
Chris.
Sent from my GT-I9100 using XDA
This should not happen... if it does... I'm guessing it's because... when you use kies, USB debugging should be off. And when you use Odin... you should enable USB debugging.
(This way has NEVER failed me... or anyone else I know. Otherwise something else must be up)
themadba said:
Yes it interferes with Odin. Just open your task manager and quit all tasks related to kies. Kies doesn't like Odin being able to do all the amazing flashing.
Chris.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
chris thanks but i even switched off my pc and and nothing in tassk manager is running related to kies
but thanks anyway
Because when you uninstalled kies, you probably removed the usb drivers you need. Try to re-install it and make sure you phone is in debugging mode after... before using odin.
If you don't want to install the drivers with kies, then you need to download and install the samsung drivers yourself.
cyberboob said:
make sure you phone is in debugging mode after... before using odin.
Click to expand...
Click to collapse
my phone wont boot up so i dont know if debugging mode is on and i have installed the usb drivers to my pc .
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
cyberboob said:
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
Click to expand...
Click to collapse
your not kidding lol
cyberboob said:
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
Click to expand...
Click to collapse
I don't think that's true. To flash via Odin, you just need drivers installed (with Kies installation, or stand-alone driver installation), and the phone needs to be in download mode. If these conditions are met and the phone is connected to the computer via USB, and Odin still doesn't see the phone, you may need to try another computer.
lol. Are you trying this while the phone is plugged in via usb? Try unplugging it first... then go into download mode... then start odin and then plug in your phone.
cyberboob said:
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
Click to expand...
Click to collapse
i was flashing a firmware and in the middle of it loading onto my phone ,my pc shut down my phone wont boot up . when it starts up it comes up with
two little pc's and it says firmware update encountered an error please use kies to enter recovery
i can get the phone into download mode but kies doesnt see the phone neither does odin .
if i try to enter recovery mode by holding down power ,home and volume up it comes up with the same message about the firmware error .
hope this explains it
ctomgee said:
I don't think that's true. To flash via Odin, you just need drivers installed (with Kies installation, or stand-alone driver installation), and the phone needs to be in download mode.
Click to expand...
Click to collapse
Then you know something I don't, because from all tutorials I've seen and videos... Odin won't see phone unless debugging mode is enabled.
cyberboob said:
lol. Are you trying this while the phone is plugged in via usb? Try unplugging it first... then go into download mode... then start odin and then plug in your phone.
Click to expand...
Click to collapse
oh ive tried that too lol
now downloading the drivers again and going to try and reinstall them
Well I hope it gets sorted, or someone with better knowledge can help you get it recognized by Odin or kies.
Past 5am here and I need sleep. Will check to see how you doing tomorrow. Good luck!
cyberboob said:
Well I hope it gets sorted, or someone with better knowledge can help you get it recognized by Odin or kies.
Past 5am here and I need sleep. Will check to see how you doing tomorrow. Good luck!
Click to expand...
Click to collapse
thanks for all your help , i have a feeling its the usb drivers for some reason
will let you know how i get on
thanks again
i am running resurrection remix 2.6.1 and when ever i connect my phone to pc via USB it only charges and does not connect...i do not get any drop down options...i have tried using different cables and also different pc's...any help would be really appreciated...thanks in advance!!
prashamsahni said:
i am running resurrection remix 2.6.1 and when ever i connect my phone to pc via USB it only charges and does not connect...i do not get any drop down options...i have tried using different cables and also different pc's...any help would be really appreciated...thanks in advance!!
Click to expand...
Click to collapse
go to systemsettings>storage there hit the soft menu button to open settings there u select USB computer connection and in that select MTP mode then connect to pc and check
I have same problem with cable connection
I'm connecting by wifi from play store get air droid or WiFi file transfer its very easy
Sent from my GT-I9100 using xda premium
Sun90 said:
go to systemsettings>storage there hit the soft menu button to open settings there u select USB computer connection and in that select MTP mode then connect to pc and check
Click to expand...
Click to collapse
still the same
prashamsahni said:
still the same
Click to expand...
Click to collapse
well then try this,dwnld the att USB mass storage apk, put it on ur internal sdcard
then install like a normal apk file and reboot, first time when u open the same it will ask for supersu permission grant it.
then connect to pc open the app and tap on the blue android icon so that it turns green and now u will be connected to pc.
Sun90 said:
well then try this,dwnld the att USB mass storage apk, put it on ur internal sdcard
then install like a normal apk file and reboot, first time when u open the same it will ask for supersu permission grant it.
then connect to pc open the app and tap on the blue android icon so that it turns green and now u will be connected to pc.
Click to expand...
Click to collapse
my pc is not recognizing it...nothing is happening..i have also tried deleting the drivers of my phone from pc..
charge plus connect
Sun90 said:
go to systemsettings>storage there hit the soft menu button to open settings there u select USB computer connection and in that select MTP mode then connect to pc and check
Click to expand...
Click to collapse
+1 to this. and also your samsung drivers may not be installed yet. :good:
idoleng said:
+1 to this. and also your samsung drivers may not be installed yet. :good:
Click to expand...
Click to collapse
Sun90 said:
well then try this,dwnld the att USB mass storage apk, put it on ur internal sdcard
then install like a normal apk file and reboot, first time when u open the same it will ask for supersu permission grant it.
then connect to pc open the app and tap on the blue android icon so that it turns green and now u will be connected to pc.
Click to expand...
Click to collapse
i tried cleaning the phone's usb receptacle and after that my pc finally responded when my phone was connected to it but the phone is unidentified(yellow triangle pops)...is it because of the wrong driver?
prashamsahni said:
i am running resurrection remix 2.6.1 and when ever i connect my phone to pc via USB it only charges and does not connect...i do not get any drop down options...i have tried using different cables and also different pc's...any help would be really appreciated...thanks in advance!!
Click to expand...
Click to collapse
Did you enable fast charging?
You can change that by changing the settings of the Siyah kernel or the fast charging toggle.
chocolate_lover said:
Did you enable fast charging?
You can change that by changing the settings of the Siyah kernel or the fast charging toggle.
Click to expand...
Click to collapse
no i did not enable fast charging...the only problem i am facing is no pc is recognizing my phone
prashamsahni said:
i tried cleaning the phone's usb receptacle and after that my pc finally responded when my phone was connected to it but the phone is unidentified(yellow triangle pops)...is it because of the wrong driver?
Click to expand...
Click to collapse
uninstall the exsisting drivers from ur PC, then reload the drivers and check
Sun90 said:
uninstall the exsisting drivers from ur PC, then reload the drivers and check
Click to expand...
Click to collapse
did that too..its just driving me crazy..nothing is helping!!
http://forum.xda-developers.com/showpost.php?p=29843320&postcount=16
skip the odin part and download mode.
ksilver89 said:
http://forum.xda-developers.com/showpost.php?p=29843320&postcount=16
skip the odin part and download mode.
Click to expand...
Click to collapse
tried that as well but nothing i think there's something wrong with my phone coz the pc is recognizing every other phone..
Can the pc recognize your phone in download mode? if yes, use odin to flash another kernal.
I have the same problem before and it works for me!
Sent from my GT-I9100 using xda app-developers app
seetings>>developing options>>debugging mode
if it's on turn it off and try to connect and if it's off turn it on and try again
Tefanym said:
seetings>>developing options>>debugging mode
if it's on turn it off and try to connect and if it's off turn it on and try again
Click to expand...
Click to collapse
honadia said:
Can the pc recognize your phone in download mode? if yes, use odin to flash another kernal.
I have the same problem before and it works for me!
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
tried debugging didn't work...
and the pc does not recognize my phone even in the download mode....tried flashing through CWM but it didn't work as well...
btw i really appreciate all the help thanks a loot guys!!!
have you tried factory reset on RR?
idoleng said:
have you tried factory reset on RR?
Click to expand...
Click to collapse
through CWM??? then yes but not from the settings>backup&reset...i am not sure but i think they are different..
can anyone tell me how to properly clean phone's USB and charging port...???
hi
i want to know if some of you have the drivers for galaxy ace, so i can connect to download mode
i need they to install manually the .exe version dosent work to me so please if you can give me that drivers i will be very greatfull
danis1997 said:
hi
i want to know if some of you have the drivers for galaxy ace, so i can connect to download mode
i need they to install manually the .exe version dosent work to me so please if you can give me that drivers i will be very greatfull
Click to expand...
Click to collapse
just gogle it man samsung usb drivers
Hit Thanks if I Helped
Hitesh2626 said:
just gogle it man samsung usb drivers
Hit Thanks if I Helped
Click to expand...
Click to collapse
the problem is that all the drivers i found are in the exe file...i need they to install manualy
i uncompres the .exe file and get the drivers but they didnt work ./
danis1997 said:
the problem is that all the drivers i found are in the exe file...i need they to install manualy
i uncompres the .exe file and get the drivers but they didnt work ./
Click to expand...
Click to collapse
ok so now see do these just plug your device to your pc or laptop which must be connected to internet and then after plugging your device it will automaticaly start installing usb driver !:thumbup:
Hit Thanks if I Helped
Hitesh2626 said:
ok so now see do these just plug your device to your pc or laptop which must be connected to internet and then after plugging your device it will automaticaly start installing usb driver !:thumbup:
Hit Thanks if I Helped
Click to expand...
Click to collapse
i gave you the thanks xD but it does not help me jaja...all normal and simple methods i already tried :/...the problem is that my galaxy ace bricked, so i am triying to get Odin but it does not reconize my device
danis1997 said:
i gave you the thanks xD but it does not help me jaja...all normal and simple methods i already tried :/...the problem is that my galaxy ace bricked, so i am triying to get Odin but it does not reconize my device
Click to expand...
Click to collapse
ok dude now try to follow these http://forum.xda-developers.com/showthread.php?t=1840645
Hit Thanks if I Helped
try installing kies, the drivers come with it or go here http://www.samsung.com/in/support/download/supportDownloadMain.do
Hello.
I cand find my s5830i in odin. I use the cable in download mobe but my pc have a messege to write . "Usb device not recognised" why my pc cant find my ace? I istall and unintsall kies smasung drivers and odin many, many times and I do all thins in win 7 ,8.1 and xp . I use for all this 2 computers. I have use odin again and I have not any problems before. Can anybody help me?
manos_mand said:
Hello.
I cand find my s5830i in odin. I use the cable in download mobe but my pc have a messege to write . "Usb device not recognised" why my pc cant find my ace? I istall and unintsall kies smasung drivers and odin many, many times and I do all thins in win 7 ,8.1 and xp . I use for all this 2 computers. I have use odin again and I have not any problems before. Can anybody help me?
Click to expand...
Click to collapse
It's usually the drivers. Please reinstall them again and try to see if your device can recognize it. Also make sure the usb cable is a working one. Do post the results. Hope I Helped
download latest samsung usb drivers, just search for it in google, in case you are using the latest version of Odin, i attached Odin3 v1.84 i've been using with my Ace-i since the latest version of Odin doesn't recognize my phone [silly really]
Just download a Stock ROM if you're device is bricked and do as follows
1. Run as Admin
2. locate .pit file [included in .zip file]
3. set proper files
MODEM = PHONE
CSC = CSC
PDA = PDA
4. Boot Ace-i to Odin / Download Mode [Vol Up + Vol Down + Power]
5. Press Volume Up
6. Flash
7. Wait patiently [it took seconds for me to flash Stock ROM]
8. Reboot Device
now you're good
Hit Thanks if i helped
xlSKYFiRElx said:
download latest samsung usb drivers, just search for it in google, in case you are using the latest version of Odin, i attached Odin3 v1.84 i've been using with my Ace-i since the latest version of Odin doesn't recognize my phone [silly really]
Just download a Stock ROM if you're device is bricked and do as follows
1. Run as Admin
2. locate .pit file [included in .zip file]
3. set proper files
MODEM = PHONE
CSC = CSC
PDA = PDA
4. Boot Ace-i to Odin / Download Mode [Vol Up + Vol Down + Power]
5. Press Volume Up
6. Flash
7. Wait patiently [it took seconds for me to flash Stock ROM]
8. Reboot Device
now you're good
Hit Thanks if i helped
Click to expand...
Click to collapse
I have use odin again. I have experience with that. LoL
*I have allready test it with 3a cables
manos_mand said:
I have use odin again. I have experience with that. LoL
*I have allready test it with 3a cables
Click to expand...
Click to collapse
Are you sure you have the latest drivers?
mahithm said:
Are you sure you have the latest drivers?
Click to expand...
Click to collapse
For odin yes.
For samsung drivers not.
Can you give me a link.
manos_mand said:
For odin yes.
For samsung drivers not.
Can you give me a link.
Click to expand...
Click to collapse
You can download all the drivers from the useful guide by @brijeshep. Head to the "How to install Stock Firmware?" part of the guide to access all the necessary parts of the download. Here is the link,
Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
manos_mand said:
I have use odin again. I have experience with that. LoL
*I have allready test it with 3a cables
Click to expand...
Click to collapse
Here's the www.4shared.com/rar/YEW-Bh1S/Samsung_Galaxy_Ace_GT-5830_USB.htm?locale=en
Press Thanks If I Helped...
Sk.vignesh said:
Here's the www.4shared.com/rar/YEW-Bh1S/Samsung_Galaxy_Ace_GT-5830_USB.htm?locale=en
Press Thanks If I Helped...
Click to expand...
Click to collapse
Thenx a lot ..
But if all this not work? What I can do?
manos_mand said:
Thenx a lot ..
But if all this not work? What I can do?
Click to expand...
Click to collapse
So did it work?
mahithm said:
So did it work?
Click to expand...
Click to collapse
No work
hi first uninstall kies and
try Samsung drivers package and then restart the pc ..
now download different version of odin and try ..it Will recognised ...
if error persists explain the type of error showing on the display ...
Sk.vignesh said:
hi first uninstall kies and
try Samsung drivers package and then restart the pc ..
now download different version of odin and try ..it Will recognised ...
if error persists explain the type of error showing on the display ...
Click to expand...
Click to collapse
the error is "usb device not recognised"
i have install and uninstall many times kies and drivers.
Can i install stock rom from CWM or stock recovery?
anything other of odin?
manos_mand said:
the error is "usb device not recognised"
i have install and uninstall many times kies and drivers.
Can i install stock rom from CWM or stock recovery?
anything other of odin?
Click to expand...
Click to collapse
Sadly you can't install stock rom from recovery
manos_mand said:
the error is "usb device not recognised"
i have install and uninstall many times kies and drivers.
Can i install stock rom from CWM or stock recovery?
anything other of odin?
Click to expand...
Click to collapse
Why to install many times kies, doesn't required
As i see that your device is not recognised by the drivers ,
So now download PDA net drivers (search it on google )
After downloading and installing
Just connect your device to your PC and wait for a min to detect ( you ll get to see in Task Bar right corner icon)
Then Open Odin and try the rest.
Hitesh2626 said:
Why to install many times kies, doesn't required
As i see that your device is not recognised by the drivers ,
So now download PDA net drivers (search it on google )
After downloading and installing
Just connect your device to your PC and wait for a min to detect ( you ll get to see in Task Bar right corner icon)
Then Open Odin and try the rest.
Click to expand...
Click to collapse
new messege for me from PdaNet
error...
"Please make sure your phone is attached to the computer and usb debugging is enabled on the phone"
I am sure ...
manos_mand said:
new messege for me from PdaNet
error...
"Please make sure your phone is attached to the computer and usb debugging is enabled on the phone"
I am sure ...
Click to expand...
Click to collapse
Before getting brick , your usb socket was working fine ?
Your PC was detecting your device ?
Better to give your device to service center .
Hitesh2626 said:
Before getting brick , your usb socket was working fine ?
Your PC was detecting your device ?
Better to give your device to service center .
Click to expand...
Click to collapse
i format my coputer and then i brick my device!
before fomat it work fine.... then not
i mast uninstall kien?
i mast have install only pda net and samsung drivers install?
Hitesh2626 said:
Before getting brick , your usb socket was working fine ?
Your PC was detecting your device ?
Better to give your device to service center .
Click to expand...
Click to collapse
i have somthing now!!!
i flash a kernel nad i can get in the fierst mobile rom.
but i can flash anything other. i i flash other rom it stop at samsung logo!
if i flash again this kernel i get in this fierts rom!
nothing new from debugging
manos_mand said:
i have somthing now!!!
i flash a kernel nad i can get in the fierst mobile rom.
but i can flash anything other. i i flash other rom it stop at samsung logo!
if i flash again this kernel i get in this fierts rom!
nothing new from debugging
Click to expand...
Click to collapse
Ok so you now your on Stock Rom , so just now get into recovery > flash CWM > and take Backup
Then reboot your phone, after again get into recovery mod (e3 red one ) and do wipe data/cache then Reboot your device , After doing all , then flash custom Rom which ever you wanted.
An error has occurred while updating the device software Use the Emergency recovery in the Smart Switch PC Software. An I cannot get it into d/l mode to odin the new firmware. Anyone know how to get it back into d/l mode? Tried pwr vol- bixby, I get to the menu to choose vol up or vol down and no matter the choice I go back to the light blue scrren with that same msg.
Please help!
Thanks
total7kaos said:
An error has occurred while updating the device software Use the Emergency recovery in the Smart Switch PC Software. An I cannot get it into d/l mode to odin the new firmware. Anyone know how to get it back into d/l mode? Tried pwr vol- bixby, I get to the menu to choose vol up or vol down and no matter the choice I go back to the light blue scrren with that same msg.
Please help!
Thanks
Click to expand...
Click to collapse
Try running odin from that screen
Sent from my God Mode 8
louforgiveno said:
Try running odin from that screen
Sent from my God Mode 8
Click to expand...
Click to collapse
I did and it forced it and now works great. Thanks!
What is a god mode 8??
total7kaos said:
I did and it forced it and now works great. Thanks!
What is a god mode 8??
Click to expand...
Click to collapse
Lol, its my Rooted Note 8 (galaxy note 8 - god mode 8) just a play on words.
Sent from my God Mode 8
total7kaos said:
I did and it forced it and now works great. Thanks!
What is a god mode 8??
Click to expand...
Click to collapse
I could not. I have the same problem and I hate odin in setuppconnection. how did you do it?
Thanks
louforgiveno said:
Try running odin from that screen
Sent from my God Mode 8
Click to expand...
Click to collapse
Did not realize this screen actually was download mode, just for Oreo. Thanks I got flashed in Odin!
AaronCompNetSys said:
Did not realize this screen actually was download mode, just for Oreo. Thanks I got flashed in Odin!
Click to expand...
Click to collapse
I tried to do this method and fail o odin when i tried to run odin and flash the sock firmware on that error screen just got fail
any help please
osk4rin said:
I tried to do this method and fail o odin when i tried to run odin and flash the sock firmware on that error screen just got fail
any help please
Click to expand...
Click to collapse
Maybe try other versions of Odin and firmware? Ensure your drivers on PC work. That's all I've got.
AaronCompNetSys said:
Maybe try other versions of Odin and firmware? Ensure your drivers on PC work. That's all I've got.
Click to expand...
Click to collapse
I fixed the problem. I reinstall the drivers and flash the stock firmware from the error screen.
Thank you!
i am also here, can anyone help me pls
kuddi said:
i am also here, can anyone help me pls
Click to expand...
Click to collapse
Uhm.. Did you read what @louforgiveno said? He gave the answer right at the top of the thread.. Just run odin in the warning screen window It'll still go!!
kuddi said:
i am also here, can anyone help me pls
Click to expand...
Click to collapse
I tried to flash my J7Pro and I got this same problem, I have updated all drivers and I tried others version of odin without any success, sometimes odin with crash and at times I would get this from odin, it would not pass setup connection (image submitted)
Django64 said:
I tried to flash my J7Pro and I got this same problem, I have updated all drivers and I tried others version of odin without any success, sometimes odin with crash and at times I would get this from odin, it would not pass setup connection (image submitted)
Click to expand...
Click to collapse
In your case i would try changing the COM port number assignment (to something low such as 1, 2 or 3.
Basically you open Device manager (while phone is plugged in, in download mode) and find the COM port (under COM/LPT) double click to open properties and go to advanced tab (if i remember the naming right) and then change the port assignment number to a low number as i stated above.
Then reboot PC and try to run odin again.
Good luck
Sent from my God Mode 8
Samsung J7 pro
louforgiveno said:
In your case i would try changing the COM port number assignment (to something low such as 1, 2 or 3.
Basically you open Device manager (while phone is plugged in, in download mode) and find the COM port (under COM/LPT) double click to open properties and go to advanced tab (if i remember the naming right) and then change the port assignment number to a low number as i stated above.
Then reboot PC and try to run odin again.
Good luck
Sent from my God Mode 8
Click to expand...
Click to collapse
Hi now I am getting Re-Partition operation failed
Django64 said:
Hi now I am getting Re-Partition operation failed
Click to expand...
Click to collapse
Have you unchecked re-partition on the odin Options tab? Be sure to check or un-check the required options based on what your are flashing.
Sent from my God Mode 8
odin failed for J7pro
louforgiveno said:
Have you unchecked re-partition on the odin Options tab? Be sure to check or un-check the required options based on what your are flashing.
Sent from my God Mode 8
Click to expand...
Click to collapse
Hi yes I did. my phone cannot turn off, lucky for me I have the LCD off so can disconnect the battery and retry
I have also tried changing the ports
(image submitted) this is what I am getting now.
Django64 said:
Hi yes I did. my phone cannot turn off, lucky for me I have the LCD off so can disconnect the battery and retry
I have also tried changing the ports
(image submitted) this is what I am getting now.
Click to expand...
Click to collapse
So the first thing i notice....if you look under "FAIL" (red box) it shows your com port as 16.....this com number should be changed to a single digit number 1-9 (preferably 1,2,3,4 or 5).
Google "change COM port assignment" for details with pics.
Sent from my God Mode 8
Oh yeah and duh!! I forgot another thing to try ...
Remove the (.md5) from the name of the odin files so they end with (.tar).
Hopefully one of the two "tricks" will work for you
Sent from my God Mode 8