i've on my hand a ZOphone i5s (april 2014) MT6572 (probably 512 ram) 1Ghz x2 (Not 1.3Ghz)
the dumped rom has this scatter:
PRELOADER 0x00000000
MBR 0x00880000
EBR1 0x00900000
UBOOT 0x025A0000
BOOTIMG 0x02600000
RECOVERY 0x02C00000
SEC_RO 0x03200000
LOGO 0x032C0000
ANDROID 0x03FC0000
CACHE 0x1BBC0000
USRDATA 0x1C2C0000
and all roms i've download (to do some tests... and maybe to find a CWM or carliv recovery have this structure
PRELOADER 0x00000000
MBR 0x00600000
EBR1 0x00680000
UBOOT 0x02320000
BOOTIMG 0x02370000
RECOVERY 0x02980000
SEC_RO 0x02F80000
LOGO 0x03040000
ANDROID 0x03D40000
CACHE 0x2C740000
USRDATA 0x43F40000
on this ZOphone (it's a ZOPHONE?)
all adresses are different and i can't find any ROM that fits on this device... (all ROMS are displaing NO LIGHTED SCREEN.. or maybe pressing UP/DOWN voleume the torch light starts)
just my UBOOT and BOOTIMAGE are working.. (some times.. when i replace my UBOOT and BOOTIMAGE on goophone/thunderbird/mi5s ROMS.. the CHARGING IMAGE is different from the stock... but no SIGNS OF LIFE...)
i've tried EVERY RECOVERY i've FOUND on the WEB ( XDA and RU sites ) but .. nothing.. no one are workign on my device... (I've tried to create a recovery using standard tools but nothing)
there is a way to adapt a different rom for my MBR/EBR/UBOOT/BOOTIMG configuration?
thank you in advance for any help...
this is my scatter: http://www.wcn.it/scatterzophonei5s042014.txt
the i5s model displayed on the dial screen is : a131mw_bs[2014/02/13]
my recovery is: http://www.wcn.it/recovery.zip
the files system i think is not a UBIFS... because there are some EXT4 partitions...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UP
no one? ..
Related
I have two apparently-identical Chinese S5 clones, delivered running Kitkat. They are labelled "Model:S5 Quad Core", are sold as Haipai and self-identify as Alps. They are MTK6582-based with 1GB/4GB:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unfortunately, I've managed to brick one of them. No problem, I thought - take a ROM dump from the other, and restore it to the bricked one.
But while MTK Droid Tools appears to create the ROM dump OK, and SP Flash Tool communicates with the brick and appears to download the ROM to it, the brick still won't boot. No splash screen, nothing - just a glow to show the backlight is active behind a blank screen.
I've flashed it with and without the preloader, I've Googled extensively and tried other suggested things, such as using the scatter file from before Droid Tools packages the ROM to download, and in desperation I've tried it as a firmware upgrade, etc. Nothing works.
What have I missed? There must be something! Are there any other software tools I could try? Should the MTK Droid Tools ROM dump actually work with a 6582-based handset?!
Argh!! :crying:
I have a black haipai s5 but it is software bricked and it does not boot anymore! stuck on welcome splash screen
can you dump the rom and share it to me so i can flash it?!?!
thank you very much sir!
Hi,
Sorry if I am opening this topic in a wrong place, but I have been doing some search about the Tvbox I bought.
http://www.aliexpress.com/snapshot/313383007.html?orderId=60793411617840
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://yadi.sk/i/QhU7FEQggGbTg
https://yadi.sk/i/9yMYFf5fgGbWK
Item specifics Item Type: TV Stick
Brand Name: LST
Connectors: USB
Operation System: Android
Hard Disk Capacity: < 100GB
Model Number: H6SB
Chip Programme: Allwinner A20,1.5GHz
Flash: 4G FLASH ROM
Android OS: Android 4.22
Color: Black,White
HDMI: HDMI1.4
Size: L:150*W:93*H:23
Video: 720P 1080P 2160P
Language: Chinese,English,Germany,Japanese,Korea etc.24 languages
Place of Origin: China (Mainland)
_____________________________________
After using some time i tried to install CWM recovery. but it didn't work. I think I used the wrong CWM recovery file. Now It doesn't start. I tried I few firmware posted on this site like Justop Dbox firmware (http://forum.xda-developers.com/showthread.php?t=2398632&page=2). I downloaded firmwares and prepared an SD card using Phoenixcard 3.0.9 . None of them seemed to work. I am stuck and dont know what to do.
I asked the vendor to send me the factory ROM. He did sens me a ROM but when I prepare the SD card and they to install it I gets into loop at a "gauge" screen. It fills, obviously loading something, then restarts again and again.
I am desparate, can someone help me.
Thanks in advance...
Hello.
I have one old Lenovo with MT6582M , which has 1gb ram and 4rom, which i flashed with stock rom using SP flash tools. After that phone was in bootloop, then tried to reflash but got error with checksum that recovery image isn't same size. And then i realize there is no recovery mode.
Next i format all data, and flash again, all went OK. But phone won't power on anymore, no charging, nothing...
PC recognizes it as 3 different ports, it depends on how i connect it (with ,without battery or vol key pressed) : Mediatek preloader USB VCOM (Android) , ADrom port , and MediaTek USB port
I tried 3 STOCK roms from different sites, flashing process has no issues, but phone still can't turn ON. But if i check DA DL all with chksum, after flash i get this error:
Brom error: chksum_error (1041)
Tried to flash only boot, after that whole rom again, tried to firmware upgrade but got Error: Failed to get PMT info.
I tried many versions of SP flashtool, and the older ones show me this 29Gb+8gb in statusbar, which i can't say how happened, but it seems PMT-partition memory table , has some problems.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does someone has any ideas for me ?
Hi Guys i have a Redmi 6a and i familiar with android developing and i did flash custom \ stock roms and i rooted my phone with magisk succesfully many times and i'd use xposed too BUT last night i faced with a wierd problem that i can not find any solution about that
my phone was updated to the last version of global rom miui 11.0.7
i downloaded a kernel named Miui speed mod 1.19 and in the comments i did'nt find any feedback that it may cause problem
when i flashed that kernel , there is showing a message : Failed to mount '/nvdata' (Invalid argument) and the device got bootloop
and wiping partitions and changing partition's format did not solve it and I had no idea theres a partition named nvdata that is
Necessary mount to boot
I tried to flash the current version recovery firmware through TWRP but again in mount section i can not enable nvdata
i also downloaded latest fastboot firmware and flashed with fastboot with stuck recovery i wiped but the device still stuck in mi second boot screen
flashing custom pixel experience rom either did'nt work out and devcie stuck at google logo
in file manager of twrp the folder of nvdata is empty ,
Link of kernel that i flashed : https://forum.xda-developers.com/redmi-note-2/development/kernel-miui-v7-1-init-d-support-t3285769
Please Give me a solution that i can recover my phone (( i feel blue Do you think the problem is hardware? if it's , is it from emmc ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi Guizz, Big strange Problem Asus ZF552KL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
scan BAR CODE produce this : N0CY1716MB0017574
I tried all methode all recovery all boot possible for this device. Asus Zenphone 3 ZF552KL, don't know the build or kernel or no info because the phone go only in fastboot.. no have stock recovery or boot system STUCK on asus LOGO.
I tried 3 asus flash tools but i think the process don't start because i cant active debug usb or unofficial font.
i wont to try last solution flash single file for file: system.img,boot.img,recovery.img via fastboot but if some one give me this file i feel happy...
or if some one know test point for debug and flash stock rom i feel happy...
or if some one can help me to enter recovery stock o flash recovery stock i can flash stock rom via update.zip....
I NEED TO ENTER IN RECOVERY BUT ONLY FAST BOOT GO..
------- when i flash with raw file flash tool tell me FAILURE STATUS
-i cant find many raw file (only one have) if some one link me download of other example oreo, nougat, MM, feel happy
if flash all raw file...
THANK'S for help