hello,
after i made a full phone restore from phone options the phone stucked on boot screen with a yellow warrning sign.
i do not have recovery mode just the download mode, and when i use odin my phone is not being reconized , i did install all the drivers but have some problem with CDC driver of sumsung and don't know how to fix it.
any idies ?
You need to try as many of the troubleshooting steps in Hopper8's 'Odin troubleshooting' thread stickied in General as many times as you need to until you get a successful Odin flash.
MistahBungle said:
You need to try as many of the troubleshooting steps in Hopper8's 'Odin troubleshooting' thread stickied in General as many times as you need to until you get a successful Odin flash.
Click to expand...
Click to collapse
. i've seen it but i can't get my phone opened with odin in any ccomputer :.\
1) I don't believe you've tried everything in that thread multiple times. You are looking for an easy fix. There isn't one. Perseverance & actually following the help you've been given fixes these things.
2) There's nothing else which isn't in the thread that can be suggested in these situations; the thread covers every single possibility.
You can either do what I said in my PP or your phone stays busted. I don't really care either way, as I won't be looking at this thread again.
Related
Well, can anyone share a recovery code for kies?
I was only helping a friend revive his device when its so bad now. Sheesh.
Warranty is over. Can't enter any mode.
You have to get into download mode & flash a stock rom with Odin. How ? Sticky near the top of Q&A (it's for I9100 but the process is the same, just make sure you get an I9100G rom or you'll bust the phone permanently). Also, search for Hopper8's 'Odin won't flash' thread if you have problems flashing.
^^^^what he said. In addition to that, use my guide if you can't enter download mode. There's a section aimed at that.
Sent from a galaxy far, far away
MistahBungle said:
You have to get into download mode & flash a stock rom with Odin. How ? Sticky near the top of Q&A (it's for I9100 but the process is the same, just make sure you get an I9100G rom or you'll bust the phone permanently). Also, search for Hopper8's 'Odin won't flash' thread if you have problems flashing.
Click to expand...
Click to collapse
I can't get into download mode, which is the main issue. The power+home+ vol up combination wont work. Neither does any other combinations. It asked for Kies but Kies needs you to enter either mode. Which I can't.
Hopper8 said:
^^^^what he said. In addition to that, use my guide if you can't enter download mode. There's a section aimed at that.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Your post gave me hope, then shambled it . I did the second one using my chin. Nope. Sigh~
Its extremely hard to obtain a JIG in my country though. Any newly found methods? The owner allowed me to try everything.
Please delete
Yep, you're right. Getting the phone to successfully take a stock rom flash via Odin is the only way you're fixing it. How ? Search for Hopper8's 'Odin troubleshooting' thread. Try the stuff in the that thread. I'd be very surprised if you can't get it working normally doing that.
Edit - Doesn't matter which stock rom you use, that has nothing to do with the flash working/not. Any stock rom will do.
ok i recently purchased a samsung s2 i9100p with a software issue in the hope of fixing it. i didnt understand at time of purchase that custom roms/kernals etc might have been loaded onto the phone and now im completely confused.
what i know about the device is when power button is pressed i get the black samsung s2 i9100 loading screen and no more
ive then read about how to enter recovery mode and the phone doesnt boot into it but will boot into download mode which reads the following
odin mode
Product Name: GT-i9100
Custom Binary: YES (8 counts)
Current Binary: Samsung Official
so i have no idea what versions of the roms,kernels etc i require as i dont know the current versions installed if any. And i have read about devices being rooted and unrooted which has left me confused in that aspect.
i did locate an official ROM file for i9100p with orange lock which is what i believe i need as the phone has orange logo on back cover. but when i get into odin ive tried both old and new versions the phone get to the NAND Write Start Stage and then Fails.
Anyone out there any advice as to what im doing wrong? it would be greatly appreciated
Search for Hopper8's 'Odin troubleshooting' thread (do an advanced search on his username), try the stuff in that thread. You should successfully be able to flash it.
MistahBungle said:
Search for Hopper8's 'Odin troubleshooting' thread (do an advanced search on his username), try the stuff in that thread. You should successfully be able to flash it.
Click to expand...
Click to collapse
Thanks for quick reply il have a look at that now and see if i can get any further with it
It's a great thread/pretty much 'the reference' for this sort of thing on here, I'd be surprised if you can't recover it/get a successful Odin flash done with the info in it.
MistahBungle said:
It's a great thread/pretty much 'the reference' for this sort of thing on here, I'd be surprised if you can't recover it/get a successful Odin flash done with the info in it.
Click to expand...
Click to collapse
thanks alot mate at least i have a reference of what i should be doing now
downloading the files for this step
"Another option for i9100
If you have an i9100, probably the best option to flash is to flash 4.1.2 JellyBean leak. Download it here. This is a 3-part firmware. It will wipe your device as it flashes, and in many cases this extra wipe while flashing contributes to a successful flash. To set this file up in Odin (as it is 3 parts): PDA = CODE_I9100XXLSJ.tar, PHONE = MODEM_I9100XXLS6.tar, and CSC = CSC_HOME_OXX_I9100OXXLS1.tar. As usual, do not tick 'repartition'. "
in the hope the multiple files will be more successful than just the PDA> ROM flash i was trying. will post and let you know how it goes
Yep, hopefully the 3 part wiping the device will remove whatever remnants of what was previously on the phone that are causing the phone not to boot normally.
MistahBungle said:
Yep, hopefully the 3 part wiping the device will remove whatever remnants of what was previously on the phone that are causing the phone not to boot normally.
Click to expand...
Click to collapse
Hi sorry took so long to update you, i tried alot of stuff from hopper8's troubleshooting thread today and still no further forward but ive bit the bullet and dropped into repair shop in town to see if they can get it sorted.
when i used the three parts it still stuck in NAND Write failed and when i took the PDA>ROM file off it got to writing phase and then failed to write. so not sure whats up with it
dano667 said:
Hi sorry took so long to update you, i tried alot of stuff from hopper8's troubleshooting thread today and still no further forward but ive bit the bullet and dropped into repair shop in town to see if they can get it sorted.
when i used the three parts it still stuck in NAND Write failed and when i took the PDA>ROM file off it got to writing phase and then failed to write. so not sure whats up with it
Click to expand...
Click to collapse
ok an update on my problem left it in repair shop and they managed to get it to boot to recovery but when i try and reset/wipe i am presented with a fallen over android with red triangle, its still stuck on boot loop but at least now i can access both recovery and download mode.
i also purchased a usb jig to try reset the counter but it doesnt reset must be whatever firmware on the phone from what ive read. after doing a check imei.info it shows that the phone is still under warranty until feb 2014 but i know because its been tampered with they probably wouldn't look at it
any guidance/suggestions would be greatly appreciated
Hello, whenever I try to install ROM and it seems to me NAND Write Start
I tried ODIN 1.3 1.85 3.09
I read on this forum a bit and say it in a vacuum but are not sure, anyone know anything what to do?
Hopper8's 'Odin troubleshooting' thread stickied in General; find it & try all the troubleshooting steps as many times as you need to in order to get a successful Odin flash.
So as the title suggests i have an dead home button and bootloop. This means that i can't boot into recovery to do a factory reset.I flashed the stock rom via odin but it still bootloops because of the previous cyanogenmod rom i had. I can't enter recovery by the up-power-home key combination and i also can't enter by the adb reboot recovery at bootloop.
I don't know if there is anything else to do, Is there any method i can wipe data and do a factory reset from odin ?
Hopper8's 'Odin troubleshooting' thread stickied in General; download the 3 part firmware linked to in thread & flash with Odin - this will wipe the phone & hopefully get rid of whatever is causing bootloop. Problems with flash ? Go through troubleshooting steps in thread methodically until you get a successful flash.
MistahBungle said:
Hopper8's 'Odin troubleshooting' thread stickied in General; download the 3 part firmware linked to in thread & flash with Odin - this will wipe the phone & hopefully get rid of whatever is causing bootloop. Problems with flash ? Go through troubleshooting steps in thread methodically until you get a successful flash.
Click to expand...
Click to collapse
Oh my God, it worked! Thank you very much, i cannot believe it f****** worked! THANKS!
Good news, glad it worked. No probs Don't forget to thank the OP in Hopper's thread, he put a lot of time/effort into putting it together to make it the 'go-to' thread for S2 on here in these situations.
Hello!
I am facing a really similar problem, however, i can't enter the download mode (also because of the broken home button) to flash the 3 part firmware that was linked in that thread. Do you have any other idea? i also tryed the adb download mode but the computer is not recognizing the usb (SAMSUNG USB MTP failed).
Thanks in advance.
The only thing that *might* work is to force the phone into download mode with a USB jig.....then follow @Hopper8s guide as @MistahBungle suggested to the other poster. If your phone is bootlooping as opposed to being completely dead, you have a reasonable chance that the jig will work.
My wife says I'm a phone geek....She's probably right
hey!!
Thanks for the reply!! After about 50 trys, the phone miraculously entered the download mode with the technique of holding the volume down pressed and plugging a charger in it. After that i followed the steps described in the guide, flashed the 3 part firmware and worked like a charm!
Thx a lot for the help!!
Cant find link for 3 parts firmware ... any help plz ???
mazeessam said:
Cant find link for 3 parts firmware ... any help plz ???
Click to expand...
Click to collapse
Check hopper8's odin troubleshooting guide. It is sticky'd in the general section and has a link (hosted by me) to the 3 part firmware in the OP
Sent from my rooted kn0x0 SM-G900F S5