Hi there,
How can i fix a soft-brick on my Asus MeMo pad 10 (me102a)
I am on Android 4.2.2 (soft-bricked) with stock recovery.
I have tried to install the stock rom but no success. I get this error after a minute: assert failed (! less_than_int(1381914137, getprop("ro.build.date.utc")) (if I remove the line from the updaterscript it fails because i'm on stock recovery)
Also i tried to install cwm with rkflashtool for my tablet but i get "Cannot open device"
How can i fix the problem with the stock rom?
Kind regards,
Rico
Related
[Q] "Apllication not installed" error when trying to install Navitel 7.5 on Android 4
I'm trying to install "Navitel navigator 7.5.0.41" on Android 4.0.4, but get "Apllication not installed" error. When I'm downgrade Android version to 2.3.8 (unofficial) and try install the same application again, the installation finished succesfully.
Phone is Huawei U8150 with custom firmwares by Alberto96.
Log is attached, I'm trying to find anything about "Installation error code: -19" at this forum, but unfortunately.
Would be grateful for any additional help.
Thanks!
Hi, I'm Serkan.
My english isn't good because I'm Turkish.
Sorry for my English.
I've got an Asus Zenfone 5 Lite (A502CG)
And it bricked.
I rooted this before time.
And I want upgrade operating system.
I downloaded firmware for my phone from Asus official website.
And installed with adb. (on Recovery Sideload)
Writing:
e: fota_return_code 409
But after;
Coming USB photo (And coming Cloverview driver)
Or Coming Asus Logo...
Please help me. I'm not want use warranty because I rooted.
How can i fix symlink problem?
Again sorry for my english.
Adikom said:
Hi, I'm Serkan.
My english isn't good because I'm Turkish.
Sorry for my English.
I've got an Asus Zenfone 5 Lite (A502CG)
And it bricked.
I rooted this before time.
And I want upgrade operating system.
I downloaded firmware for my phone from Asus official website.
And installed with adb. (on Recovery Sideload)
Writing:
e: fota_return_code 409
But after;
Coming USB photo (And coming Cloverview driver)
Or Coming Asus Logo...
Please help me. I'm not want use warranty because I rooted.
How can i fix symlink problem?
Again sorry for my english.
Click to expand...
Click to collapse
can u please tell me how to root asus zenfone 5 a502 cg...i try many time but still i can't root my phone..
My Zenfone 5 received today an OTA update (3.24.40.78) and I authorized it, but it went into a bootloop, maybe because it was rooted (I had the 3.23.40.52 version until now).
I couldn't risk not backing up some of the data I had in the internal memory, so I decided to try TWRP and it really helped on that issue (doing a backup).
But now I am stuck with a (soft) bricked device, and I really (!!!) need help with it.
I also have tried factory resetting, of course, but all it does is enter the bootloop again.
For some reason, TWRP sideloading is not working on my computer: the device is properly recognized in all modes but sideloading, it just vanishes, then comes back as a USB-connected device again when I mount it or go into bootload/droidboot. I tried updating drivers, uninstalling and reinstalling drivers and devices, etc., but no good. So instead of sideloading I went for the "install" option in TWRP (after copying the files to the internal memory, of course). But here is the bad part, I have tried four different versions and none work:
2.22.40.54: it shows "Device image SKU:" and nothing comes after that, then states "OTA image SKU: WW" (my device is WW!), then gives the following error:
Code:
assert failed: getprop("ro.build.asus.sku") == "WW"
return code 8
5.3.3.3 [i.e., trying to downgrade from Lollipop to Kitkat]: approximately the same error. It also leaves blank after "Device image SKU:" and, after stating "OTA image SKU: WW", it says "Please use the right SKU for updating".
3.23.40.52 [i.e., trying to go back to the version that was installed until today]: it says "Only higher than Android 4.4.2 20150409 image version can upgrade to Android 5.0" (but I was already on 5.0!).
3.24.40.78 [i.e., trying to properly install the latest version, that bricked my phone]: the error is "Only Android 4.4.2/Android 5.0 20150522-20151001 image version could upgrade with this package".
On all four cases it ends saying there as an error executing the updater binary in the chosen zip file.
My device was always WW, but I even tried tried to "change from TW" to WW by flashing fastboot and recovery img files from one of the zips, but all I got was a dead android robot logo, so I installed TWRP back again.
Please help...
Hi All,
I have a phone that looks like a Samsung S4, but is in fact a Mediatek MT-6572.
As the installed software did not allow me to open lots of apps, I decided to give rooting and reflashing a go.
I managed to root the device, had super SU installed and then tried to find a ROM that worked.
In that process I managed to (accidentally) format the bootloader.
At present the phone is only being recognised by SP Flashtool (as an MT-6572).
I can do a format, no problem.
I can start the flashing, but always get some sort of error.
At first it was the NAND vs Emmc error, so I tried to find a working NAND ROM.
The ones I did find on the net also resulted in some sort of error.
I had both a BROM error and the "PMT changed for the ROM" error.
I have been using the SP flashtool 5.1628.
Any suggestions anyone?
Hello, i have some problem with SPFlashtool.
I had this tablet Lenovo A7600H ( 3g Version). While i was using it he start get's error that google service terminated and reboot itself.
After he booted up i get problem with Encrypted Unsuccesfull error. I tried to Hard Reset, but notthing.
So i tried to flash is stock rom with SPFlashTool, he flashed up only the preloader and after that i get error DRAM WRITE FAILED (3154)
I stupidly format the device, and flashed only the preloader. He flashed okay, but after that now every time i try to flash all files from the scatter file, he flash the preloader and after that i get BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069), so i thinked could be the size of the rom, but i find a RU site that have all the firmware for this tablet, tried all version of Jelly bean, Kit kat, lollipop etc, different size, start from 650 mb to 850 mb, but notthing, always this error.
So i did a memory read test, and give me the "ERROR: NAND Flash was not detected!". What can i do? Is really a firmware things, or simply the eMMC is gone and better fine a replacement? thank you in advice
Anybody think can be any solution?