I have a galaxy y 6102 and put the update.zip on the root of my sdcard, then into system recovery and applied the update and it then stats but then says: ice" == "GT-B7510" ||getprop ("ro.product.product") == "GT-B7510" :Error in /tmp/sideload/package.zip (status 7)
Ok so what you gotta do is:
Watch this first:
Then install the zip to /post/in/the/right/section/next/time reboot and done. enjoy
Related
Yesterday I wanted to re-flash my ROM (did that about 4 times before without complication) because of a random wifi bug. All things did quite fine , i wiped data/system/cache/dalvik-chache/sd-ext but after i said install .zip from sd, there was the error - lavine.
Log:
-- Installing: /sdcard/update.zip
Finding update package...
Openning update packge...
Installing update...
assert failed: getprop("ro.product.device") == "ST18i" || getprop("ro.build.product") == "ST18i" || getprop("ro.product.board") == "ST18i" || getprop("ro.product.device") == "ST18a" || getprop("ro.build.product") == "ST18a" || getprop("ro.product.board") == "ST18a" || getprop("ro.product.device") == "urushi" || getprop("ro.build.product") == "urushi" || getprop("ro.product.board") == "urushi"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
What am i using:
-Sony Ericcson Xperia ray (rooted)
-FreeXperia boot.img (worked the last 4 times)
-official CM7 build for ST18i (worked last 4 times)
i even reflashed the boot.img twice, but nothing changed.
I cant even access Android because i formatted the whole device + sdcard
What am i doing wrong and what can i do now?
Please help me as fast as possible (I need my goddamn phone >.<)
Greetings
~Jay
Really don't know if that helps but once I got exactly the same error. The reason was that the file system of my SD-card was corrupted somehow. Formatting the card several times via PC didn't help. There was the same error message. Finally the solution was to flash stock firmware via Flashtool and format the card from the phone menu afterwards. After that everything worked like expected. I even don't know how the file system got corrupted but the card itself seems to be OK.
Nope. it did not work. Ain't able to flash it with flashtool even after driver updates because falshtool doesn't recognize my phone. Blargh >.<
EDIT: Okay, got Flashtool working now. Have flashed original ROM, currently backing up all things and then trying to flash CM7 or MIUI again
EDIT2: Formatted, reflashing now
EDIT3: Working again! Thank you very much!!! All i need to do now is running titanum backup all over it :3
Hi,
To install Cyanogenmod ROM in my SEXperia Neo, Install boot.img from cm-7.2.0-hallon.zip package and copy the same zip file to SDCard.
After rebooting i start it in bootable mod and does followings:
Wipe data/factory reset
Wipe cache partition
Wipe Dalvik Cache
And then i select "install zip from sdcard" and choose "cm-7.2.0-hallon.zip".
But later i got following message.
CWM-based Recovery v5.0.2.8
--Installing: /sdcard/cm-7.2.0-hallon.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "MT15i" ||
getprop("ro.build.product") == "MT15i" ||
getprop("ro.product.board") == "MT15i" ||
getprop("ro.product.device") == "MT15a" ||
getprop("ro.build.product") == "MT15a" ||
getprop("ro.product.board") == "MT15a" ||
getprop("ro.product.device") == "hallon" ||
getprop("ro.build.product") == "hallon" ||
getprop("ro.product.board") == "hallon" ||
E:Error in /sdcard/cm-7.2.0-hallon.zip (Status 7)
Installation aborted.
I done some research but its doesn't work.
"I found the fix.
if you unzip the zip you downloaded
go into META-INF\com\google\android\
replace your updater-script with the updater-script found in updater-script.zip
RE- ZIP the folders (should have META-INF, system, and boot.img)
Open Recovery and flash should work"
And right now my phone is dead.
Please help me in this issue.
Thanks in advance.
buntu88 said:
Hi,
To install Cyanogenmod ROM in my SEXperia Neo, Install boot.img from cm-7.2.0-hallon.zip package and copy the same zip file to SDCard.
After rebooting i start it in bootable mod and does followings:
Wipe data/factory reset
Wipe cache partition
Wipe Dalvik Cache
And then i select "install zip from sdcard" and choose "cm-7.2.0-hallon.zip".
But later i got following message.
CWM-based Recovery v5.0.2.8
--Installing: /sdcard/cm-7.2.0-hallon.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "MT15i" ||
getprop("ro.build.product") == "MT15i" ||
getprop("ro.product.board") == "MT15i" ||
getprop("ro.product.device") == "MT15a" ||
getprop("ro.build.product") == "MT15a" ||
getprop("ro.product.board") == "MT15a" ||
getprop("ro.product.device") == "hallon" ||
getprop("ro.build.product") == "hallon" ||
getprop("ro.product.board") == "hallon" ||
E:Error in /sdcard/cm-7.2.0-hallon.zip (Status 7)
Installation aborted.
I done some research but its doesn't work.
"I found the fix.
if you unzip the zip you downloaded
go into META-INF\com\google\android\
replace your updater-script with the updater-script found in updater-script.zip
RE- ZIP the folders (should have META-INF, system, and boot.img)
Open Recovery and flash should work"
And right now my phone is dead.
Please help me in this issue.
Thanks in advance.
Click to expand...
Click to collapse
Dead Means what kind of dead? Can u enter fastboot mod.if yes then download any customized stock GB ROM for Neo from xda.flash them through flashtool to boot ur phone.
koushikjgec said:
Dead Means what kind of dead? Can u enter fastboot mod.if yes then download any customized stock GB ROM for Neo from xda.flash them through flashtool to boot ur phone.
Click to expand...
Click to collapse
Thanks for your time.
Dead means i can enter into fastboot mod and can install boot.img into it, but when i reboot it in recovery mod and try to install by selecting "install zip from sdcard" and choose "cm-7.2.0-hallon.zip", it gives intallation abort error.
And flashtool always asks for connecting NEO in USB debugging mode. But i can't do it because i dont have installed ROM in NEO.
Flash the stock ics rom again and after that flash cm7....it should work..or if you have a nandroid backup restore it
Sent from my MT11i using xda app-developers app
At least that is what i did when i ve got that error..and it worked
Sent from my MT11i using xda app-developers app
Sony Software Update Service
buntu88 said:
Thanks for your time.
Dead means i can enter into fastboot mod and can install boot.img into it, but when i reboot it in recovery mod and try to install by selecting "install zip from sdcard" and choose "cm-7.2.0-hallon.zip", it gives intallation abort error.
And flashtool always asks for connecting NEO in USB debugging mode. But i can't do it because i dont have installed ROM in NEO.
Click to expand...
Click to collapse
Have u tried Sony Official Software Update Service.Download from http://www.sonymobile.com/global-en/tools/update-service/.Install and run it,follow on screen instructions.see if it can help.though u will be unrooted after updating to official software.
"Sexperia" hahaaa....it a good word
Sent from my MT15i using Tapatalk 2
assert failed status 7
hi,
getting the same error while installing CM9 stable release.
ro.build.product = MT11i
ro.build.product = MT11a
problem with zip
(status 7)
Installation aborted.
I have a neo V MT11i
bombayboy said:
hi,
getting the same error while installing CM9 stable release.
ro.build.product = MT11i
ro.build.product = MT11a
problem with zip
(status 7)
Installation aborted.
I have a neo V MT11i
Click to expand...
Click to collapse
same here. installing over ICS 4.1.B.0.431
Working method:
Simply flash an official ROM (.ftf) with Flashtool in Flashmode mode;
Flash a correct Kernel (extract it from Cyanogen rom zip, boot.img usually) with Flashtool in Fastboot mode;
Enter recovery CMW;
Perform a full wipe factory reset, and cache wipe nextly;
Finish with applying custom ROM by CWM;
Done.
Hello,
I was trying to install the Paranoid Android ROM (http://forum.xda-developers.com/showthread.php?t=2203301).
I did everything as always but unfortunately I receive an error:
Code:
CWM-based Recovery v.5.5.0.4 :: CF-v.1.5
-- Installing: /sdcard/pa_i9053-3.15-23MAR2013-gokussjx.zip
Finding update package...
Opening update package...
[COLOR="DarkRed"]Installing update...
assert failed: getprop("ro.product.device") == "m3" || getprop("ro.built.product") == "m3" ||
getprop("ro.product.device") == "i9305" || getprop("ro.built.product") == "i9305" ||
getprop("ro.product.device") == "GT-I9305" || getprop("ro.built.product") == "GT-I9305"
E:Error in /sdcard/pa_i9053-3.15-23MAR2013-gokussjx.zip
(Status 7)
Installation aborted[/COLOR]
Im not a software developer for mobile phones but I guess it is trying to tell me, that the ROM which I'm trying to install isnt working on my device.
But I am absolutely sure that I got an I9305 as you can see on the attached screenshot.
Any ideas?
I9305 Q&A forum this is I9300 .
But suspect a faulty download judged on your information .
INSTRUCTIONS,
1. UPDATE RECOVERY
2. FACTORY RESET
3. INSTALL ROM, GAPPS
4. WIPE CACHE & DALVIK CACHE
5. REBOOT
PA 3+ UPDATES DO NOT NEED A FACTORY RESET,
BUT YOU NEED TO INSTALL GAPPS ASWELL.
JJEgan said:
I9305 Q&A forum this is I9300 .
But suspect a faulty download judged on your information .
Click to expand...
Click to collapse
Sorry... my mistake.
This thread can be closed after I have already reopened it in the correct forum (http://forum.xda-developers.com/showthread.php?p=39743752#post39743752).
Thank you.
I am having a problem with my phone, when I plug it into my computer my computer will not detect my phone
Computer:
Windows 7 with all the most up to date htc drivers and windows updates
Phone:
HTC One S ville (S4)
hboot - 1.14
Radio - 1.08
CWM - 6.0.3.1
CyanogenMod - 10.1-20130304 Experimental-ville-m2
I was told if I update to CM nightlys that it has a high chance to fix the problem, however when I install the nightly it aborts saying I need a newer version of hboot
Error Says:
-- Installing: /sdcard/clockworkmod/download/get.cm/get/jenkins/37986/cm-10.1-20130813-NIGHTLY-ville.zip
Finding update package...
I:Update location: /sdcard/clockworkmod/download/get.cm/get/jenkins/37986/cm-10.1-20130813-NIGHTLY-ville.zip
Opening update package...
Installing update...
Warning: No file_contexts
script aborted: assert failed: getprop("ro.bootloader") == "2.15.4444" ||
getprop("ro.bootloader") == "2.15.0000" ||
getprop("ro.bootloader") == "2.13.0000"
assert failed: getprop("ro.bootloader") == "2.15.4444" ||
getprop("ro.bootloader") == "2.15.0000" || getprop("ro.bootloader") ==
"2.13.0000"
E:Error in /sdcard/clockworkmod/download/get.cm/get/jenkins/37986/cm-10.1-20130813-NIGHTLY-ville.zip
(Status 7)
Installation aborted.
result was NULL, message is: assert failed: install_zip("/sdcard/clockworkmod/download/get.cm/get/jenkins/37986/cm-10.1-20130813-NIGHTLY-ville.zip")
that's all well and good however in order to update my hboot I need to connect it to my computer based on reading many forums on the subject, so now can anyone please fill me in on a solution to the problem!
Thank You,
GunKartas
I've zte nubia z5s mini with TWRP v. 2.6.3.0 and I installed MIUI V5 on it.
No OTA is able to update, and by reading on the matter, I found out about the build.prop file.
In my current file, I have the line:
Code:
ro.product.device=NX403A
However, the OTAs fail with:
Code:
script aborted: assert failed: getprop("ro.product.device") == "NX403A" ||
getprop("ro.build.product") == "NX403A"
assert failed: getprop("ro.product.device") == "NX403A" || getprop("ro.build.product") == "NX403A"
E:Error executing updater binary in zip
I tried fixing the permissions via Rom Toolbox light & also via TWRP, cleared Dalvik cache, and still, it fails with that message.
Is there anything I can put in the build.prop to fix this?
There are so many threads on the net about status 7.
Does anyone know why this happens?