Hi everybody, I just got my HTC One M8 today and after rooting it, I tried to flash Android Revolution onto it. Needless to say, this failed, and I've since been struggling for hours to try to get my phone into a workable state. The boot loader seems to be unlocked, but whenever I try to install any ROM, I get an error 7 and the install is aborted. I'm currently using CWM with Philz. Whenever I try to reboot the phone, it just gives me the white HTC screen, and freezes there. Any help would be very much appreciated! Thanks ahead of time!
davha0 said:
Hi everybody, I just got my HTC One M8 today and after rooting it, I tried to flash Android Revolution onto it. Needless to say, this failed, and I've since been struggling for hours to try to get my phone into a workable state. The boot loader seems to be unlocked, but whenever I try to install any ROM, I get an error 7 and the install is aborted. I'm currently using CWM with Philz. Whenever I try to reboot the phone, it just gives me the white HTC screen, and freezes there. Any help would be very much appreciated! Thanks ahead of time!
Click to expand...
Click to collapse
***** UPDATE *****
I did a complete factory reset, then flashed a stock ROM on and made sure everything mounted. After a terribly long load time, everything came up and worked just fine.
Related
ok so yesterday i rooted my telus fascinate and i was going to isntall the MIUI rom. Following a guides instructions i installed rom manager and did a clockwork mod recovery, i then put the rom on my root file of my sd card and tried to install it through the "install rom from sd card option" on the app. Problem was i only got into the stock recovery mode and not the clockwork one it aslo gave me signature failures. I then followed the guide of this video:
http://http://www.youtube.com/watch?v=Q7xV0yE9ZcA
when i installed the kernel everything went fine but then after i got into CW recovery and installed the rom my phone booted and it just kept repeating the normal splash screen (it said galaxy I9000 instead) followed by a screen that said something like cryogenic mod. I got freaked out from here and tried to install stock kernels to get my phone running. As of right now my phone will boot but only stay on the splash screen. I can not access recovery mode. I really need some help, thanks.
these are some of the files i used:
the rom i used,
http://http://forum.xda-developers.com/showthread.php?t=1150045
the kernel i used,
http://http://forum.xda-developers.com/showthread.php?t=822756
thanks
the links are broken. Did you install a rom / kernal specifically for the telus fascinate?
i believe it could have been for the galaxy I9000,
ill try to fix the links btw
update*
i managed to get it into clockwork recovery mode by holding the dam buttons for a solid 5 minutes, after doing this i pressed factory reset, now my phone is stuck saying:
-- wiping data...
Formatting DATA
0_0' im not having a great day
http://forum.xda-developers.com/showthread.php?t=1227807Until I know what version miui and kernal you are trying to flash, it's hard to help. It definately sounds like your phone is soft bricked tho.
Edit* Here are some links you should read up on.
http://forum.xda-developers.com/showthread.php?t=923712
http://forum.xda-developers.com/showthread.php?t=1227807
try to type this inot your browser:
http://forum.xda-developers.com/showthread.php?t=1150045
aswell as this:
http://forum.xda-developers.com/showthread.php?t=822756
it takes a little longer but i cant fix the links sorry.
So as of now i got i managed to wipe all of the data on my phone and i am in recovery mode, if i click reboot it does the same thing and stays on the boot screen. If i click the mod from the sd card it flashes from the normal model number screen to one saying cryogen mod. It then keeps going back and forth with a flash of a screen that has a bunch of commands on it for about 2 seconds
brodydj said:
try to type this inot your browser:
http://forum.xda-developers.com/showthread.php?t=1150045
aswell as this:
http://forum.xda-developers.com/showthread.php?t=822756
it takes a little longer but i cant fix the links sorry.
So as of now i got i managed to wipe all of the data on my phone and i am in recovery mode, if i click reboot it does the same thing and stays on the boot screen. If i click the mod from the sd card it flashes from the normal model number screen to one saying cryogen mod. It then keeps going back and forth with a flash of a screen that has a bunch of commands on it for about 2 seconds
Click to expand...
Click to collapse
The rom you are trying to flash is for a i500 fascinate. I suggest taking the time to do alot of research before you turn the phone into an expensive paperweight. Read this link!!
http://forum.xda-developers.com/showthread.php?t=921285
K well i ran that rom and it works now but he only problem is i dont have any cell service, do you know how to fix that. I know that you are probably laughing at my mild retardism at this subject but i am a big noob. As for what you said in your previous reply is their an MIUI version for the fascinate from telus because i basically rooted my phone so i could get this rom.
thanks
Update*
i followed the instructions on the link you posted and chose the rom for MIUI I9000 as the one i was going to install but when i istall zip from sd it only says installed correctly and then when i reboot it keeps changing from the sgh-t959d to the galaxy s cyanogen screen
yea your boot looped now. I would run the rom that worked just install the compatible radio and kernal for it and you should get cell service back.
ok thanks i got all my cell service back and i got the MIUI rom to work. Now to just ry to remember all the apps i had
Your welcome...glad you got everything working!
I am a relative noob at flashing roms and rooting phones, but last night I ran into an issue. My phone was having all sorts of problems so I was going to put it back to factory, then start from scratch. I then decided to just flash a different rom. here is what happened.
I deleted SuperSU - this was done as part of the process to unroot and put back to factory, after this step I decided to flash a different rom
Put new ROM on phones internal memory as well as SD card
Wipe data
wipe cache and delvic cache
install new rom
Black screen
In an attempt to unbrick I relocked my bootloader.
Now, my phone can power on (Give white screen and HTC logo), then go black, and I can access Recovery mode. That is all.
I have plugged the phone to my computer and tried running the RUU, but the RUU will not recognize the phone.
I am not sure what to do to unbrick my phone and get it working again. Any and all help would be most appreciated!
Sorry I can't be more eloquent with my words, but I'm at work. I will be responding throughout the day, though.
thanks again so much to anyone that can help!
Try running it straight from bootloader
I loaded into Bootloader, selected Fastboot(USB), ran the .exe and it still won't recognize the phone. However, I did get recovery unlocked again. So I can get into recovery mode, flash all the ROMs I want, mount and unmount, yet still everytime I flash a new ROM it still boots to a black screen. Am I doing this right?
Try a Rom with kernel installer
Thanks! Since I am still a little new could you tell me how I would spot a ROM with kernel installer or could you point me to any one that could work? From then, it's the same process as flashing any other ROM? Do I need to do something with the kernel?
Meanbean and stock with goodies are the 2 that I'm certain of. Meanbean needs to be flashed twice the first time
Thanks so much for your help, I will post my results soon!
Failed
Here's what it says. Sorry for the blurry picture. I followed directions closely.
What version of recovery are you using? You may need to update it. Assuming you have a pc, try mounting the internal memory to pc through twrp. Windows will automatically tell you to format if its damaged
2.1 Updating now
omg it finally worked! Updated TWRP using fastboot and flashed MeanBean. Thank you so much!!!
Sorry I'm a noob at all of this. Successfully rooted my phone today thanks to Honsoon2000's excellent tutorial and toolkit. Then I went to install Android Revolution, which appeared to go successfully and then after I flashed the kernel the phone wouldn't load and just hangs at the quietly brilliant screen. I followed Honsoon's tutorial to the T (or so I thought) and everything went perfectly until right at the end when I flashed the kernel. I can make it back to the bootloader screen though it says "failed to load usb master mode". I can still make it into fastboot and recovery mode...tried recovery, and the process seemed to go sucessfully, but the phone still wouldn't load after...tried reinstalling ARHD-- it's still on the sd card and the install procedure still goes off without a hitch, but the phone still won't load. I've searched around and tried everything I can, to no avail. Any help would be muchly appreciated, and I apologize in advance for being a noob wasting people's time.
Edit: For example, when I follow the steps outlined in the FAQ it asks me to enter the command 'fastboot flash boot boot.img' , but when I do it says 'error: cannot load boot.img'.
Edit 2: So I put my boot.img file from Android Revolution into the data directory of the rooting toolkit and was able to complete the above flashboot command. I was also able to install the ROM off my SD card...however the phone still hangs on the Quietly Brilliant screen...I can't even power the phone down...whenever I try it just reboots...frustrating...really hoping someone can help me...cheers.
Before you begin, make sure that the drivers for the One X+ are installed.
Place the boot image being used on the computer's hard drive.
Boot in to recovery and flash the ROM.
When that is done, boot in to bootloader and connect the phone to the PC via a USB cable.
If the phone isn't in fastboot mode already, use the volume keys to highlight the word "fastboot", then press the power button.
Now, there should be text at the bootloader screen that says "Fastboot USB".
Finally, use the toolkit or command line and flash the kernel with the fastboot command.
This should successfully flash the ROM and the kernel. Make sure you full wipe before flashing a new ROM. If you can't seem to get the new ROM booting, the final choice is to relock the bootloader and run a RUU.
Which phone version you do own? International or AT&T / TELUS?
Did you flashed the correspondant boot.img? Did you cleared the cache? ( fastboot erase cache)
I'm trying to run an RUU but it keeps saying the battery isn't charged enough to flash anything...and this after it's been plugged in all day. Oh dear I think my phone might be done...really sucks :/
Also, it won't let me power the phone down-- every time i try it shuts the phone off briefly and then opens back up to the bootloader screen.
Fixed thanks to sarcasticphoenix. Cheers.
OK so I've tried 3 times to flash a new ROM onto my phone (Android Revolution twice and Eleganzia once) using Honsoon's toolkit...I've followed every instruction to the T as far as I can tell and all 3 times the process has gone perfectly right until the end when I flash the kernel...after that when I reboot the phone it just hangs at the Quietly Brilliant screen. I know how to relock the bootloader, flash the custom rom and get my phone back...but I really want to know what I'm doing wrong so I can install a custom ROM. I know I'm using the right ROM for my phone and am wondering what gives. Being driven crazy here...any ideas what's going wrong here would be helpful. BTW on the last attempt right after I finished and the phone hung I went into the boot loader and followed the instructions in the FAQ for fixing a bootloop...still nothing.
Edit: Solved my problem-- I managed to successfully load eleganzia...the only thing i did differently the last time was flash the kernel BEFORE installing the ROM off the SD card.
jrockwell said:
OK so I've tried 3 times to flash a new ROM onto my phone (Android Revolution twice and Eleganzia once) using Honsoon's toolkit...I've followed every instruction to the T as far as I can tell and all 3 times the process has gone perfectly right until the end when I flash the kernel...after that when I reboot the phone it just hangs at the Quietly Brilliant screen. I know how to relock the bootloader, flash the custom rom and get my phone back...but I really want to know what I'm doing wrong so I can install a custom ROM. I know I'm using the right ROM for my phone and am wondering what gives. Being driven crazy here...any ideas what's going wrong here would be helpful. BTW on the last attempt right after I finished and the phone hung I went into the boot loader and followed the instructions in the FAQ for fixing a bootloop...still nothing.
Edit: Solved my problem-- I managed to successfully load eleganzia...the only thing i did differently the last time was flash the kernel BEFORE installing the ROM off the SD card.
Click to expand...
Click to collapse
That's usually what I do first, flash the kernel and then install the zip via recovery
Sent from my HTC One X+ using xda premium
Which kernel are you referring too? Actually there is one or two kernels available but only for the International version, not the AT&T/TELUS which you seem to have.
I strongly suspect that your boot looping was because you didn't flash the boot.img file correctly or not at all. And you don't seem to install the good ROM version for your phone.
Elegancia has two ROM versions one for International and one for AT&T/TELUS users.
ARHD is for International users.
Please read Q12 of the FAQ.
Lucky Thirteen said:
ARHD is for International users.
Click to expand...
Click to collapse
Lol...yeah I don`t know how I missed that. I ended up getting elegancia successfully flashed and loaded so all is well. In retrospect this was a good experience because there`s nothing like having to get yourself unforked from a bad situation to gain an understanding of what`s going on. Cheers.
I have a couple questions and since I`m not allowed to post yet in the elegancia thread I'll try in this thread first:
1) An elegancia question: Is there a way (widget) to toggle data roaming on and off in this ROM?
2) Is there a way to tweak settings (transparent pull down, selection of launcher etc.) without wiping and reflashing the ROM?
3) What are people's favorite launcher for that ROM? I tried Atom but it was just a guess because I hadn't heard of any of them. I like it so far but am curious about the others.
Hi everyone, I just unlocked my bootloader via the All in one Kit, flashed the recovery, and then flashed a custom rom (Clean Rom). After it was installed, I tried to boot my phone, and it loaded the HTC Quietly Brilliant screen, and then went blank, showed the screen again that said "developer edition" or something and booted me into recovery. If I try and boot my phone again, it does it again. Am I completely screwed? Is there a way I can flash back to a stock rom via fastboot or recovery? Help would be much appreciated, I just bought this phone 4 days ago and have already seemed to mess it up.
GeorgioC123 said:
Hi everyone, I just unlocked my bootloader via the All in one Kit, flashed the recovery, and then flashed a custom rom (Clean Rom). After it was installed, I tried to boot my phone, and it loaded the HTC Quietly Brilliant screen, and then went blank, showed the screen again that said "developer edition" or something and booted me into recovery. If I try and boot my phone again, it does it again. Am I completely screwed? Is there a way I can flash back to a stock rom via fastboot or recovery? Help would be much appreciated, I just bought this phone 4 days ago and have already seemed to mess it up.
Click to expand...
Click to collapse
If you still have access to recovery, you're fine. I'm not huge on development so I can't tell you exactly what to do right now, but I can assure you that your new phone isn't a paperweight...yet
Sent from my iPad using Tapatalk HD
I bought my Moto X Pure used, and the "bootloader unlocked" message pops up everytime I boot up. However, a new security update came out this morning. But, when the update tries to re-boot, I get the TWRP main screen. The update never takes hold and keeps trying to re-boot. Which brings up the TWRP screen over and over. I've never rooted or worked with custom ROMs, so I'm in the dark here. Any ideas how I get out of TWRP Hell? Thanks.
rsdin559 said:
I bought my Moto X Pure used, and the "bootloader unlocked" message pops up everytime I boot up. However, a new security update came out this morning. But, when the update tries to re-boot, I get the TWRP main screen. The update never takes hold and keeps trying to re-boot. Which brings up the TWRP screen over and over. I've never rooted or worked with custom ROMs, so I'm in the dark here. Any ideas how I get out of TWRP Hell? Thanks.
Click to expand...
Click to collapse
Hi,
Your device is on Twrp Recovery, so official stock OTA's won't get installed via custom recovery like TWRP.
They requires stock recovery. Due to scripts / modifications etc..
Meanwhile, ive found this for you, follow that and fix your device.
Good luck!!