Hi mates.
I have a GT-I5503T and a few months ago I installed Cyanogenmod 7, and after that cyanogenmod 9.
The problem is, i downgrade to official froyo with odin with the official rom with a multipackage firmware (BOOT, Phone, PDA and CSC).
Works fine, but now every time I try to install any other custom rom, after do the procedure my phone start to boot and on the cyanogen loading screen it reboot, (start to load and reboot, start to load and reboot), and keep that way until I remove the battery. When i put back the stock rom, it works fine again. But I don't want froyo anymore. I wan't cyanogen 10 now. Attachmants are the froyo files that i used to downgrade.
Just to know, I not made a mistake when i tryed to put cyanogenmod. Clockwork version is Ok (i try with many versions), rom i downloaded from psykes reposotorium, and ops is europa.
Question:
What else i can do to my phone acept custom roms again?
Is my phone Brick? How can I unbrick without a Box? Please, send me a feedback has soon is possible.
In the appropriate cwm version wipe (format) everything included system, except sdcard.
Then try installing CM again. Hope it works
EDIT: Use I5503 files not I5500!
Sent from my D620R [Stock 4.4.2]
Still doesn't work
Vagelis1608 said:
In the appropriate cwm version wipe (format) everything included system, except sdcard.
Then try installing CM again. Hope it works
EDIT: Use I5503 files not I5500!
Sent from my D620R [Stock 4.4.2]
Click to expand...
Click to collapse
Thanx for try man, but doesen't work. I format everyhing. Still rebooting on the loading screen.
Anngelll said:
Thanx for try man, but doesen't work. I format everyhing. Still rebooting on the loading screen.
Click to expand...
Click to collapse
im sure it s because a wrong cwm version u cant just simply use cm9 related cwm on cm7 sometimes it s not compatible and system cannot be installed properly change cwm version u ll see that ll fix your problem.
Related
hey guys,
I really need your Help!
I've flashed Trips Froyo Miui 1.7 ROM.. so far so good everyting worked great. Then I wanted to flash Z's zKernel but it didn't work, so I tried FreeKernel mod 3.60, but it also didn't work.
When I wanted to reboot phone after flashing FreeKernel it didn't boot up custom Kernel and after booting up the sytem I recogniced that I don't get a signal and sd- card doesn't mount. So I rebooted phone and hoped that everyting would work, but it didn't. So I turned off phone and wanted to restore a working rom via xrecovery, but I sadly had to notice that I can't boot into recovery anymore.
So when I boot up phone it always shows "Prozess system doesn't react" or something like that.
I really don't know what I can do now, so please help me!
greez kalack
If you can, plug in your phone in with flashtool open, if it reads the phone (tells u that busybox is found) then hit ask root perms and then install recovery.
I have already tried that, but it didn't find my phone..
kalack93 said:
I have already tried that, but it didn't find my phone..
Click to expand...
Click to collapse
2 options i guess:
1. reinstall stock rom from flashtool or
2. reinstall stock rom from SEUS/PCC
OK I'll try that and I really hope it works.
Flashing stock rom via flashtool worked.
Thanks for your help!
Hey guys, so I downloaded cm9 and tried to install it on my phone.
I got it from this link and also followed the video tutorial there: http://forum.xda-developers.com/showthread.php?t=1500234
I had rooted my phone and had CWM recovery v5.0.2.6
Now when I try to reboot, there is just an blue screen.
I did exactly like in the video, I tried 2 times. Still it didn`t work. Please help. Could someone provide any step by step instructions other than the video?
Thanks.
I think you needed to use with CWM 5+
Try to get back into CWM and root your old ROM.
I am very bad at this... So I dont really know how to do that... could you provide any steps or an tutorial?
Edit:well I tried to format sd card and system but nothing. Could someone provide a link to gingerbread 2.3.5 and a way Icould put it on my phone? Also, could I do anything with samsung kies?
Kritosein said:
I am very bad at this... So I dont really know how to do that... could you provide any steps or an tutorial?
Edit:well I tried to format sd card and system but nothing. Could someone provide a link to gingerbread 2.3.5 and a way Icould put it on my phone? Also, could I do anything with samsung kies?
Click to expand...
Click to collapse
NO NO. Don't use kies. Kies sucks a lot. Search the developer forum for "clockworkmod 5" flash it normally (I suppose you already know how-to since you have CWM4) after getting CWM5, flash ICS/CM9 Normally. no need to flash GB
Here is cwm 5
http://forum.xda-developers.com/showthread.php?t=1291327
Sent from my GT-S5830 using Tapatalk 2 Beta-5
Thanks guys, okey I have everything ready for next try ( After I get my phone to work again) Right now I am looking for Cooper ops file, so I can flash to 2.3.5 (france version but I guess it works) so could anyone give me a link to cooper ops file so I get my phone working?
Thanks.
EDIT: wooohooo found cooper ops, atm odin is downloading the files. I see what I can do after that. Thanks for all the help.
Kritosein said:
Thanks guys, okey I have everything ready for next try ( After I get my phone to work again) Right now I am looking for Cooper ops file, so I can flash to 2.3.5 (france version but I guess it works) so could anyone give me a link to cooper ops file so I get my phone working?
Thanks.
EDIT: wooohooo found cooper ops, atm odin is downloading the files. I see what I can do after that. Thanks for all the help.
Click to expand...
Click to collapse
Glad we could help, be carefull next time. Always try to use newest software.
Ughh I forgot to root my phone right after flashing. So I installed CWM before rooting.. how do I root now? And also I think it is still not working. The phone has been blue for about 2 minutes now. I followed the video exactly like it was.
EDIT: damn... so after getting the blue screen again I thought of going back to normal ver and maybe some other custom ROM... but guess what.... It doesnt work anymore... I did just like before.Went into download, used ODIN to download 2.3.5 french ver to my phone, odin says PASS. But last time It had booted correctly by 4:40 or so. This time like 10 minutes have passed and still rebooting. What to do now?
EDIT2: Am I allowed to make a new thread since the problem is not with cm9 anymore?
here, check this out:
http://forum.xda-developers.com/showthread.php?t=1291327
download it and flash it through stock recovery
i dont think you need to root it before flashing this (i didnt)
i just flashed this over the stock rom (non rooted) and then flashed cm7.2
i too had such problems but dont worry flash some stock rom with odin then it wont boot so remove your battery and place it again.now go to stock recovery wipe data/factory reset and wipe cache partition then reboot.then use cwm 5 to flash cm 9.
noobdroid_90 said:
here, check this out:
http://forum.xda-developers.com/showthread.php?t=1291327
download it and flash it through stock recovery
i dont think you need to root it before flashing this (i didnt)
i just flashed this over the stock rom (non rooted) and then flashed cm7.2
Click to expand...
Click to collapse
I have that, and I am trying to flash cm9.
So.. I`m kinda at the beginning again... I tried some other roms, but non were as good looking as that cm9 ICS beta 6.
Could anyone give me step by step tutorial? Because I did EXACTLY like in the video. 2 times. And it still didnt work. Please help.
Well here what have done for flash th rom for the first time:
-I was on gingerbread 2.3.6 XWKS2 (my device was root by super one click and i flash CWM 5 via recovery)
-Then i put the rom in my sdcard, reboot in recovery (press home and power button)
'
-Into recovery i wipe cache partition and wipe data, go in advanced and wipe dalvik cache go back to the main menu and select install zip from sdcad choose the file you have(here it's cm_ace-ota-eng.01042012) then press yes wait a while (the rom are installing) then when it's done select reboot system now.
-The first boot take a while (and i have the blue screen too you just have to wait but if it's exceed 5-10 minute try to reflash the rom)
I do that will all rom i have install and i don't have any problem. Hope i help you
*Sorry if my english is bad
Danceslas said:
Well here what have done for flash th rom for the first time:
-I was on gingerbread 2.3.6 XWKS2 (my device was root by super one click and i flash CWM 5 via recovery)
-Then i put the rom in my sdcard, reboot in recovery (press home and power button)
'
-Into recovery i wipe cache partition and wipe data, go in advanced and wipe dalvik cache go back to the main menu and select install zip from sdcad choose the file you have(here it's cm_ace-ota-eng.01042012) then press yes wait a while (the rom are installing) then when it's done select reboot system now.
-The first boot take a while (and i have the blue screen too you just have to wait but if it's exceed 5-10 minute try to reflash the rom)
I do that will all rom i have install and i don't have any problem. Hope i help you
*Sorry if my english is bad
Click to expand...
Click to collapse
Hey, this is exactly like in the video, I tried that. But this time I am going to first use odin to put XWKS2 2.3.5 on my phone, and then root using SuperOneClick (Last time I used udp1 or something like that) and then try again.
Kritosein said:
Hey, this is exactly like in the video, I tried that. But this time I am going to first use odin to put XWKS2 2.3.5 on my phone, and then root using SuperOneClick (Last time I used udp1 or something like that) and then try again.
Click to expand...
Click to collapse
Ow sorry then but i just tell you the method i use i do not remark that
But it's strange your device do not flash propely and i saw you've try a lot of thing I'm speechless for the moment just tell us if you succeed to flash cm9.
My girlfriend has a galaxy s2, so i thought i could install the cyanogen mod 10 on it. well i tried a lot, and in the end installed the cyanogenmod 9, and no google apps for me, i forgot to install the gapp zip, so i tried to install it, and I can't, it doesn't work, i can't flash cyanogenmod 10 and not even the cyanogenmod9 that i did in the beggining everytime i try, cwm gets stuck in opening udpate file, and it fails saying it's a bad file.
Jpcsilva said:
My girlfriend has a galaxy s2, so i thought i could install the cyanogen mod 10 on it. well i tried a lot, and in the end installed the cyanogenmod 9, and no google apps for me, i forgot to install the gapp zip, so i tried to install it, and I can't, it doesn't work, i can't flash cyanogenmod 10 and not even the cyanogenmod9 that i did in the beggining everytime i try, cwm gets stuck in opening udpate file, and it fails saying it's a bad file.
Click to expand...
Click to collapse
If you can boot your phone, just download the files (both CM9/10 and GAPPS) again and then install it again through CWM.
Sent from the Matrix
HELP
Donnie Sins said:
If you can boot your phone, just download the files (both CM9/10 and GAPPS) again and then install it again through CWM.
Sent from the Matrix
Click to expand...
Click to collapse
I can't, the phone does not boot anymore, i don't know what to do. what should i do?
Jpcsilva said:
I can't, the phone does not boot anymore, i don't know what to do. what should i do?
Click to expand...
Click to collapse
But you can boot into Recovery mode right? If so, do you have a Nandroid backup you can restore? I hope you do. If not: next time do make a backup
If you don't have it, or you can't enter Recovery, try if you can enter the Download mode so you can flash a rom through Odin.
Good luck
Sent from the Matrix
Hey,
I have since become a S3 ... I have rooted it and wanted to play another Rome.
First I flashed my Carbon ... that was wonderful, but I had no wifi. Then I tried another Rom (with aroma installer). When I had WiFi, but since I have the menu did not like it and it was me too many Samsung Apps.
Now I have flashed me the Resurrection Remix, but the S3 boots constantly new to the CWM.
The same I have with CM11.
What am I doing wrong please?
lolamarcel said:
Hey,
I have since become a S3 ... I have rooted it and wanted to play another Rome.
First I flashed my Carbon ... that was wonderful, but I had no wifi. Then I tried another Rom (with aroma installer). When I had WiFi, but since I have the menu did not like it and it was me too many Samsung Apps.
Now I have flashed me the Resurrection Remix, but the S3 boots constantly new to the CWM.
The same I have with CM11.
What am I doing wrong please?
Click to expand...
Click to collapse
You need to install exactly like below don't miss any steps
-Installation-
1.- Wipe data / factory reset (mandatory if you coming from STOCK OR 4.2.X version or another ROM)
2.- Install the Main ROM
3- install gapps
4.- When you're back on recovery go to Advanced
5.- Wipe Dalvik Cache
6.- Fix Permissions
7.- Wipe Cache Partition
8.- Reboot
If it still not working flash TWRP recovery and use that to flash the rom
Hey,
I just did it. Then came the Samsung logo, phone restarts and I'm back in the CWM.
Have just flashed TWRP reboot (via CWM) Recovery and but still have CWM.
Grrrrrr ...... what for now
Better download official firmware from Sammobile and install thru Odin. Then Root and carry on with your favorite custom rom.
Yes I agree with KSKHH if problem still there return to stock with odin and start again..
tallman43 said:
Yes I agree with KSKHH if problem still there return to stock with odin and start again..
Click to expand...
Click to collapse
How are you doing? Your phone is working now?
Hey,
so suck an official firmware and flash it with Odin ... then the CWM away again?
If I then use the rooten begin I play me but come back on automatically, or not?
lolamarcel said:
Hey,
so suck an official firmware and flash it with Odin ... then the CWM away again?
If I then use the rooten begin I play me but come back on automatically, or not?
Click to expand...
Click to collapse
Steps:
Install ORIGIANAL firmware via ODIN
Don't need to root
INSTALL CUSTOM RECOVERY
Copy desired ROM into memory card (or intrernal, if dont have memory card)
Wipe all
Install
Profit
Hey,
I have now taken me this firmware:
I9300XXUGML2_I9300DTMGML2_I9300BOUGMK3_HOME.tar
Odin started, specified in the PDA tar file, made my S3 in the download mode, USB cable ran ... it was detected and was also flashed. Now I sit for at least 10 minutes and nothing happens.
The Samsung logo always changes its color and the LED on the top left light blue.
lolamarcel said:
Hey,
I have now taken me this firmware:
I9300XXUGML2_I9300DTMGML2_I9300BOUGMK3_HOME.tar
Odin started, specified in the PDA tar file, made my S3 in the download mode, USB cable ran ... it was detected and was also flashed. Now I sit for at least 10 minutes and nothing happens.
The Samsung logo always changes its color and the LED on the top left light blue.
Click to expand...
Click to collapse
Boot into recovery then factory reset..
hey,
exactly these thoughts I had just as well.
Meanwhile, I have written this text did something on the screen ... the phone goes again.
Thanks to all
So now just flash a recovery and then flash as usual custom of Rome?
Edit:
GT-I9300
Android 4.3
Baseband I9300BOUGMK3
Kernel: 3.0.31-2303192 [email protected]#1 FriDec 13 21:55:31 KST2013
Build: JSS15J.I9300XXUGML2
Edit2:
Hey,
so, now I have successfully flashed TWRP and tested.
Now I'll try to flash CM11 ... hopefully it starts this time also
Edit 3:
so, now it has worked wonderfully.
Thanks again for the help
Hai.
I have a galaxy note 3 sm n9005. Have already rooted by finding forum from xda and even install twrp recovery following the guides given.
But im trying to install custom rom. And tried all the roms tat is given from xda for note 3 and could install single one.
Please help to resolve this problem. Im confuse.
Tq.
Not enough details.
It's probably the version of recovery you're using.
Which version of TWRP and what errors are you receiving?
es0tericcha0s said:
Not enough details.
It's probably the version of recovery you're using.
Which version of TWRP and what errors are you receiving?
Click to expand...
Click to collapse
Im using twrp 3.0.2.1 and everytime i try to install a rom it stuck at samsung screen.
And it show md5 not found.
What roms have you tried? What firmware were you on before you started flashing? Sometimes newer roms need the newest firmware like the bootloader and modem to run correctly. Are you wiping system, data, and both caches? If you are going from a Touchwiz rom to, say, a CM based, it might also be necessary to wipe the internal storage. Of course you should back all that up to a PC first, if you do that.
es0tericcha0s said:
What roms have you tried? What firmware were you on before you started flashing? Sometimes newer roms need the newest firmware like the bootloader and modem to run correctly. Are you wiping system, data, and both caches? If you are going from a Touchwiz rom to, say, a CM based, it might also be necessary to wipe the internal storage. Of course you should back all that up to a PC first, if you do that.
Click to expand...
Click to collapse
Resurrection remix.unicorn.slim.and all cynogen rom is working. Im trying install s7edge custom rom for darkwolf and darklord. I even updated the bootloader and modem according to tutorial. I used odin to flash them..
N9005xxugboa1
Lrx21v.n9005xxugbob6
I have my stock rom n internl backed up. I try all. And still it always stuck on samsung screen.
Are you installing the kernel after the rom flash? A lot of newer Samsung roms don't have the kernel built in like CM roms.
es0tericcha0s said:
Are you installing the kernel after the rom flash? A lot of newer Samsung roms don't have the kernel built in like CM roms.
Click to expand...
Click to collapse
How can install kernel after. Everytime i install it reboots its self to samsung screen. Or should go back to recovery and install the kernel back. And thank you for your help till now.
That's definitely why it's not booting, if you didn't do the kernel. If the rom has the Aroma installer, typically the last question asks if you want to reboot now and has a check mark in by default. Just uncheck and it'll go back to recovery. But you can also just go back and flash now and should be good.
es0tericcha0s said:
That's definitely why it's not booting, if you didn't do the kernel. If the rom has the Aroma installer, typically the last question asks if you want to reboot now and has a check mark in by default. Just uncheck and it'll go back to recovery. But you can also just go back and flash now and should be good.
Click to expand...
Click to collapse
I have uncheck the reboot after install. When i install the rom it automatically reboot itself. It doesnt show anything or show done. Once it even show os not found.
Hi
Where can i install or find the latest kernel
It's in the installation instructions for the rom.
es0tericcha0s said:
It's in the installation instructions for the rom.
Click to expand...
Click to collapse
Hi.
I have found the bootloader and modem for my sm n9005 from the installation instruction for the rom.
I try to flash according to the tutorial.and my baseband didnt change. I try flash using odin 3times.
Im not sure where i did wrong.can u help me
Tq
Remove the battery for 10 seconds. Put it back in and reboot to download mode. Uncheck auto reboot. Flash then check auto reboot and flash again. Should stick.
tq
es0tericcha0s said:
Remove the battery for 10 seconds. Put it back in and reboot to download mode. Uncheck auto reboot. Flash then check auto reboot and flash again. Should stick.
Click to expand...
Click to collapse
Tq
Will try and let you know
sitijohn85 said:
Tq
Will try and let you know
Click to expand...
Click to collapse
Hi
I tried as said and it didnt chnge.
Can i ask bootloader should be at bl and modem should be at cp. Is it correct.
Hi
Thank you for your help.
I did the change on bootloader and modem.
Now im i need to know two more thing.
I download 2 dffernt kind of bootloader n modem.
I flash blxxxxxbpb1 and cpxxxxxboj1..this 2 files were tar.md5 files
Another one which i didnt flash. Blxxxxxxbpb1 and cpxxxxxxxbpb2..this 2 files are tar.tar files..
Can i know whats the different with this 2 files.
One more thing is when i chnge the bootloader and modem will the kernel changes. Or is it different.
Please guide me..im confuse.
Someone might have just mislabeled them. Flashing those will not affect kernel. Different partition of the phone.
Hi
I did change the bootloader n modem.
And even change the kernel as told in the forum. It was note5 port kernel.7.1.0..
After trying to install the darkwolf rom.it was still the same..it did not work.
Please help me
sitijohn85 said:
Hi
I did change the bootloader n modem.
And even change the kernel as told in the forum. It was note5 port kernel.7.1.0..
After trying to install the darkwolf rom.it was still the same..it did not work.
Please help me
Click to expand...
Click to collapse
This is the recommended kernel
https://www.androidfilehost.com/?fid=24572369242687310
Recommended recovery is TWRP 2.8.7.0 not the newer 3.0+
Flash other recovery. Boot to TWRP. Wipe system, data, cache, dalvik. Flash rom. Wipe caches. Flash kernel. Reboot. Should work according to lots of people on the thread for that rom.
Hi.
How flash kernel.
just flash the tar.md5 file or the tar.zip file