Related
I have checked the forums for this problem, I mean looked! Can't find anything.
My rezound keeps rebooting every 10 seconds. It turns on, then ill be using it, then BOOM reboot. Repeat...repeat....
What should I do? I wiped EVERYTHING.
I also wiped my SD Card as well, Everything like I mentioned above.
http://forum.xda-developers.com/showthread.php?t=1394659
Its a sticky in the General Forum.
Thanks! I'm gonna try this out!
This didn't work at all.
I followed everything, like 5 times. I removed the SIM card and the SD card, and cover. Everytime I go to type in the code to swith the network, my phone reboots, but only when I press a number to dial.
Are you rooted? If so what ROM and recovery are you running?
Well I am assuming I am rooted, I am on Clean ROM 4.1 SENSE ICS on Amon Ra
I have a weak signal, I checked to see if the network was the problem, and it was not.
Anytime I go to call anyone, or to dial, even if the back antenna case is on OR off, it reboots... I have no idea what to do. I will do anything to fix this.
EDIT: correction, now when I'm doing anything, when 30-45 of when im operating the phone, it will reboot
please help, My phone is TOTALLY UNSTABLE. :/
Try to clear cache and dalvik in recovery. If that doesn't work try wiping data.
Sent from my ADR6425LVW using xda premium
I just did, along with that; I flashed the latest version of rez rom to see if that changes anything. I will keep you updated, thanks.
Nothing Changed! I went to go dial A number, and right when I dial the first number, it freezes and reboots. Even If I flash a new rom and everything. What do you suggest.
It would help to know what you did before this started (was it installing CleanROM ICS 4.X?)
Did you do follow Scott's RUU instructions prior to installing his ROM? If no, there is a possibility that the new kernel has confused your old firmware. If yes, do it again and see if the new stock ROM is working for you.
If you don't know what I'm talking about, look right under the pictures in post one of Scott's 4.1, there is a link regarding preparing for the ROM. Go there and follow it closely.
Best of luck.
You had the same problem that I just fixed,
like me you probably used a trash guide to upgrade to RUU.
Use this one:
http://www.teambamf.net/topic/3528-guide-to-install-ics-ruu-and-firmware-windows/
kernal
You need a kernel patch for GB firmware or these reboots will happen. To fix update firmware......instructions on xda
I know there's a few posts on this, but looking for advice specific to my symptoms. The problem started off with Android media process using up a lot of cpu each time the phone was powered on. It gradually got worse and started rebooting when this happened. Started off as once or twice a day. Then got worse and worse. I had been on a bell atrix ROM (2.3.6) for about a year.
Tried flashing a number of roms, and making sure to clear caches and factory reset each time. Tried numerous versions of the CWMRecovery, no good. I notice that it noly seems to restart if it tries to communicate wirelessly (wifi or 3g seemingly). If I just leave it in cwmrecovery, it stays on fine. If I leave it at the first motoblur setup screen, without entering wifi settings, it stays on fine.
So I guessed it may be related to the radio. Installed a UK radio, bell original one and a euro one to no avail
Is there anything else I can do before I give up, or is it hardware?
cruhoortwunk said:
I know there's a few posts on this, but looking for advice specific to my symptoms. The problem started off with Android media process using up a lot of cpu each time the phone was powered on. It gradually got worse and started rebooting when this happened. Started off as once or twice a day. Then got worse and worse. I had been on a bell atrix ROM (2.3.6) for about a year.
Tried flashing a number of roms, and making sure to clear caches and factory reset each time. Tried numerous versions of the CWMRecovery, no good. I notice that it noly seems to restart if it tries to communicate wirelessly (wifi or 3g seemingly). If I just leave it in cwmrecovery, it stays on fine. If I leave it at the first motoblur setup screen, without entering wifi settings, it stays on fine.
So I guessed it may be related to the radio. Installed a UK radio, bell original one and a euro one to no avail
Is there anything else I can do before I give up, or is it hardware?
Click to expand...
Click to collapse
just had a look around and came across this http://forum.xda-developers.com/showthread.php?t=1884381 . Forgetting the Jb reference it might be an idea to follow the steps and see if that helps.
If it were me, I would do a complete system wipe first (CWM>mounts and storage>format system,data,preinstall,osh) and then reinstall a rom (I would recomend CM7.2 to start). I also might be inclined to take the external sd card out as well before restarting phone and see if that helps (going down the corrupt media file route)
Good Luck!
barry_ said:
just had a look around and came across this http://forum.xda-developers.com/showthread.php?t=1884381 . Forgetting the Jb reference it might be an idea to follow the steps and see if that helps.
If it were me, I would do a complete system wipe first (CWM>mounts and storage>format system,data,preinstall,osh) and then reinstall a rom (I would recomend CM7.2 to start). I also might be inclined to take the external sd card out as well before restarting phone and see if that helps (going down the corrupt media file route)
Good Luck!
Click to expand...
Click to collapse
Thanks for this, I never spotted the mounts and storage section for formatting before. Looks to be good to get a clean wipe
Will try now
I managed to get the MROM rom on to it, and it has stayed on for about 30mins now with wifi on.
However, it doesn't boot normally, it says 'Modem did not power up, starting RSD protocol support'. I have to choose Boot Android (no BP) to get it to boot ok. What would make it fail like this?
Is there any way to make the phone always boot android by default?
Another thing to add: I can't add any APN. If I add one and save, it doesn't save.
cruhoortwunk said:
I managed to get the MROM rom on to it, and it has stayed on for about 30mins now with wifi on.
However, it doesn't boot normally, it says 'Modem did not power up, starting RSD protocol support'. I have to choose Boot Android (no BP) to get it to boot ok. What would make it fail like this?
Is there any way to make the phone always boot android by default?
Another thing to add: I can't add any APN. If I add one and save, it doesn't save.
Click to expand...
Click to collapse
I can see that i am missing a boot.img to make it boot properly. Where can I download it?
A boot image always comes with any ROM, and MROM is no exception. If you sucessfully flashed the ROM, you've flashed the boot image too, I'm not sure why you think it's missing. But if you really want to reflash it, you can always extract it from the ROM's zip file.
ravilov said:
A boot image always comes with any ROM, and MROM is no exception. If you sucessfully flashed the ROM, you've flashed the boot image too, I'm not sure why you think it's missing. But if you really want to reflash it, you can always extract it from the ROM's zip file.
Click to expand...
Click to collapse
Alright, looks like I misunderstood the function of the boot.img. Any idea as to why it would not load the OS without me prompting it to boot android with no bp?
What is the best process to follow before flashing a rom?
I was doing factory reset,clearcache and clear dalvik from CWM. And I have started doing CWM>mounts and storage>format system,data,preinstall,osh now too.
Is that sufficient to get a good clean slate to start fresh?
And what's the best way to flash the radio? I have tried moto-fastboot radio radio.img, but that seems to stop the OS from loading. I assume the radio be installed after the ROM?
Tried an older gingerbread Bell rom, and same problem. I can only get it to boot by choosing boot android(no bp).
I also can't add an APN to it. I create it, save it and it doesn't save it to the list.
Found a fix here for the APN problem on ICS, but wondering if there's an equivalent on Gingerbread?
'Settings --> More... -> Uncheck 'Enable alt OEM telephony code' and 'Enable alternate getIMSI code'. Then reboot, and now you can add your own apn. '
No idea really, sorry. Kinda seems to me for some reason it's your bootloader that's having issues, not the ROM.
Still cant get it working, can't add an APN.
Replaced the SIM, same.
Noticed that the IMEI and baseband are listed as unknown, and think it's related. So I tried flashing a few radios.
Bell radio stays on about a min, then reboots phone
UK radio reboots once OS has loaded
French radio reboots once OS has loaded
I am based in Ireland, using a phone that was originally Bell Canada. Which radio should I try flashing?
Have you tried AT&T 36p or 37p radio?
No dice. What is the standard process with the radio zip? I have been extracting to a folder, then using moto-fastboot to clear the cache, then install the radio.
Am I missing a step or 2?
Why were you extracting it? Most radios come in a flashable ZIP, which means you flash it through recovery. No extracting.
I always got an error trying to install the zip in CWM. So installed img from fastboot instead. I'll try the newer zips from CWM.
cruhoortwunk said:
I always got an error trying to install the zip in CWM. So installed img from fastboot instead. I'll try the newer zips from CWM.
Click to expand...
Click to collapse
I get error 'assert failed' ...status 7.installation aborted..'trying to install both ATT radio zips via CWM, and status 0 trying Bell radio zip
Update on this:
I got a new phone a few days ago, and had trouble adding an APN (same problem it wouldn't save). Problem was it was not reading the sim correctly. I had some sellotape on part of the card. Removed this, and I was able to add the APN no problem.
I have cleaned the contacts on the sim card reader, no luck.
I am convinced that this is the faulty part though. When I go to add an APN, it should automatically populate the MCC and MNC from the sim, but it doesn't.
Sorry to bump an old thread but...
I have left this Atrix aside for a few months,and wanted to try it once more before giving up entirely.
It reboots when I use 3g or wifi. If I leave it offline or in cwm mode, it stays on ok.
Any ideas? Is it definitely hardware? (Have tried about 4 different images)
cruhoortwunk said:
Sorry to bump an old thread but...
I have left this Atrix aside for a few months,and wanted to try it once more before giving up entirely.
It reboots when I use 3g or wifi. If I leave it offline or in cwm mode, it stays on ok.
Any ideas? Is it definitely hardware? (Have tried about 4 different images)
Click to expand...
Click to collapse
Does it reboot if you put it in Airplane mode, then connect to WIFI only?
My Atrix randomly reboots if I have the cellular radio on, but if I put it in Airplane and only use WIFI, its very stable. I tried dozens of radios and ROMs, nothing seems to help, so I've chalked it up to some flaky hardware.
Have a VZW DNA, currently on Hatka 3.0.3. S-Off, latest radio, stock 2.04 kernel. Twrp
Shortly before I flashed the new radios, I had a problem that whenever I tried to connect a call, whether incoming or outgoing, com.android.phone or.. process.acore?? would force close. I can't remember what the exact name of the acore force close was. Anyway.
I was pretty sure I fixed the problem before I flashed the new radios, but either way, I have the problem again. And, I have noticed that after the force close, the SIM seems to reset. Get a toast message for preparing the SIM card.
It makes no difference whether its the stock dialer, or a third party like Go Contacts. Third party apps don't force close, just go back to whatever I was doing before I tried to connect the call.
I tried flashing the viper with both dsb's stock and cubed kernel with viper to no avail. I haven't tried RUU, or old radios simply because I haven't had time to back up.
Any ideas before I do RUU?
Sent from my HTC6435LVW using xda premium
cappiez said:
Have a VZW DNA, currently on Hatka 3.0.3. S-Off, latest radio, stock 2.04 kernel. Twrp
Shortly before I flashed the new radios, I had a problem that whenever I tried to connect a call, whether incoming or outgoing, com.android.phone or.. process.acore?? would force close. I can't remember what the exact name of the acore force close was. Anyway.
I was pretty sure I fixed the problem before I flashed the new radios, but either way, I have the problem again. And, I have noticed that after the force close, the SIM seems to reset. Get a toast message for preparing the SIM card.
It makes no difference whether its the stock dialer, or a third party like Go Contacts. Third party apps don't force close, just go back to whatever I was doing before I tried to connect the call.
I tried flashing the viper with both dsb's stock and cubed kernel with viper to no avail. I haven't tried RUU, or old radios simply because I haven't had time to back up.
Any ideas before I do RUU?
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
I had the same issue today between 2 and 3, but it wasn't letting me send texts even though I could receive them. Maybe a network hiccup?
I am on stock radios, didn't know new ones came out. It is working for me now.
in the same boat
looks like we're in the same situation. I looked through the threads and this is another case of call errors. I found this thread and one other, not sure if it was droid dna related.
cappiez said:
Have a VZW DNA, currently on Hatka 3.0.3. S-Off, latest radio, stock 2.04 kernel. Twrp
Shortly before I flashed the new radios, I had a problem that whenever I tried to connect a call, whether incoming or outgoing, com.android.phone or.. process.acore?? would force close. I can't remember what the exact name of the acore force close was. Anyway.
I was pretty sure I fixed the problem before I flashed the new radios, but either way, I have the problem again. And, I have noticed that after the force close, the SIM seems to reset. Get a toast message for preparing the SIM card.
It makes no difference whether its the stock dialer, or a third party like Go Contacts. Third party apps don't force close, just go back to whatever I was doing before I tried to connect the call.
I tried flashing the viper with both dsb's stock and cubed kernel with viper to no avail. I haven't tried RUU, or old radios simply because I haven't had time to back up.
Any ideas before I do RUU?
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
sjhanson Today, 12:20 AM #1035
Junior Member
Thanks Meter 1
Posts: 11
Join Date: Jan 2011
I am running 3.0.3 now. I was running Viper until the big man published 3.0.3, then i switched back. But even on Viper I was getting the same COM.PHONE.ANDROID has stopped error.
Cheers!
http://forum.xda-developers.com/showthread.php?t=2126386&page=2
borkborkbork! said:
looks like we're in the same situation. I looked through the threads and this is another case of call errors. I found this thread and one other, not sure if it was droid dna related.
Click to expand...
Click to collapse
Link to any of the other threads?
http://forum.xda-developers.com/showthread.php?t=2157855
xDexter said:
Link to any of the other threads?
Click to expand...
Click to collapse
I had the same issue, actually was getting soft reboots upon receipt of an incoming call, happened to me after s-off. It took a bit of fiddling, but I finally got back up and running 100% by flashing stock kernel and a clean ROM install.
TheJ0hnman said:
I had the same issue, actually was getting soft reboots upon receipt of an incoming call, happened to me after s-off. It took a bit of fiddling, but I finally got back up and running 100% by flashing stock kernel and a clean ROM install.
Click to expand...
Click to collapse
You went back to S-ON or just a different kernel?
TheJ0hnman said:
I had the same issue, actually was getting soft reboots upon receipt of an incoming call, happened to me after s-off. It took a bit of fiddling, but I finally got back up and running 100% by flashing stock kernel and a clean ROM install.
Click to expand...
Click to collapse
I also tried going back to stock ruu , nothing worked for me
borkborkbork! said:
I also tried going back to stock ruu , nothing worked for me
Click to expand...
Click to collapse
I am having 0 issues anymore with S-OFF and .torrented's rom and suggested R/W kernel: http://forum.xda-developers.com/showthread.php?t=2150262
xDexter said:
I am having 0 issues anymore with S-OFF and .torrented's rom and suggested R/W kernel: http://forum.xda-developers.com/showthread.php?t=2150262
Click to expand...
Click to collapse
com.android.phone .. but I still get my txt messages, go figure. I think my partitions may be in rare shape from rom's, kernals, and all the other numerous changes. Never been the same after I got error 7 on schatka 3.0.2, I switched back and forth from viper/hatka and twrp/cwmr
I took my phone into Verizon yesterday, explained the situation. Told them it started after ota, and I had done a factory reset already. They tried a new SIM card to no avail, overnighting a new phone.
Sent from my HTC6435LVW using xda premium
xDexter said:
You went back to S-ON or just a different kernel?
Click to expand...
Click to collapse
Forgot about this post, sorry. Did not go back to s-on, just flashed stock kernel from here: http://d-h.st/Ma1, boot.img via fastboot and then the modules zip contained within in recovery, and everything was good.
This didnt work for me . Any other suggestions?
cappiez said:
I took my phone into Verizon yesterday, explained the situation. Told them it started after ota, and I had done a factory reset already. They tried a new SIM card to no avail, overnighting a new phone.
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
Basically I hd the same situation happen to myself, no calls or data but wifi was good. Mine started to fail slowly , firs \t it was showing a 1X connection but dl were about 3G speeds. Next I lost signals in areas I never had signal issues with. Then total loss. New sim card and spent hours on the support line and a replacement unit.
Got a PM request for assistance, and thought I don't have a lot of tips to offer other than what I provided before, I'm going to post a more detailed overview (as I remember it, it's been awhile...) in case it's helpful for any other who may come across it later. The bottom line for me was that once things broke, it didn't work again until I flashed stock kernel via fastboot +modules in recovery and did a clean install of Hatka 3.03 w/ Sense launcher. That said, because of my flashing compulsion and failure to fully test things once installed, I can't pinpoint the exact step at which things broke.
Initially, I: Bought phone and factory reset, did not take Verizon OTA. Fiddled around, hated Sense, unlocked, flashed recovery, flashed Viper 1.1.0 (?, whatever the base was), booted and setup, fiddled around, hated Sense, wiped data, flashed 3 subsequent Viper updates (1.1.1,2,3 maybe?), booted and setup, fiddled around, hated Sense. Wiped and reinstalled de-Sensed Viper a few times in an attempt to get rid of Sense as much as possible.
Then things get murky. I did s-off, and at some point flashed (recovery) a kernel, Cubed I think. Wifi or something was borked (as I understand is the case with Cubed/Viper), and I flashed stock kernel back via recovery (no modules, I didn't catch that part at the time) and restored my backup for good measure, leaving me on fully functional Viper 1.1.3. Everything worked for a few days, but I continued to hate Sense, and began searching for something more sensible. At some point I flashed Hatka 3.03 w/ de-Sensed options, went to 320 DPI, and thought everything was fine for about 18 hours until I realized my phone was warm, and figured out it was rebooting every time I received (or placed) an incoming call (boss was pissed and kept trying to call me, already gives me a hard time about being an Android fanboy so I'm never going to hear the end of that). After a few hours of fiddling and various recovery attempts including restores and full wipe/clean installs of Viper, I finally managed to get things up and running with A. flashing stock kernel via fastboot + modules in recovery and a full wipe/clean install of Hatka 3.03 w/ Sense + Xperia launchers and eventually a 380 DPI.
One of or some combination of the s-off/custom kernel/failure to reinstall stock kernel modules/de-Sensed/low DPI/pin lock/Widget Locker/Viper combo I had going fouled something up, which I know is not entirely helpful. If I found myself in this situation again, I would flash stock boot.img via fastboot + modules in recovery, and probably flash a stock ROM to rule out anything else, then wipe and flash things from there until I got where I wanted or it broke.
For the record, I'm now back on my Galaxy Nexus until stable-ish CM 10.1 is within sight or I get tired of waiting and sell the thing, I just can't tolerate Sense.
same issue
I've been reading wherever I see this topic and haven't found the answer that I'm looking for. Have tried everything said but nothing has fixed my problem can't make or receive calls. This problem happened after I turned s-off have relocked boot loader, flashed RUU, reset factory, re-unlocked bootloader, re-flashed different roms, and flashed radios still not working. No doubt it is a software issue. Does anyone know how to format internal storage on this phone. My thinking is if that can be done problem should go away and then can re-flash to stock. Any help would be most appreciated.
jimmydee62 said:
I've been reading wherever I see this topic and haven't found the answer that I'm looking for. Have tried everything said but nothing has fixed my problem can't make or receive calls. This problem happened after I turned s-off have relocked boot loader, flashed RUU, reset factory, re-unlocked bootloader, re-flashed different roms, and flashed radios still not working. No doubt it is a software issue. Does anyone know how to format internal storage on this phone. My thinking is if that can be done problem should go away and then can re-flash to stock. Any help would be most appreciated.
Click to expand...
Click to collapse
Have you tried fixing permissions? In some other post I read phone process force closing was just a matter of wrong permissions.
In other hand I think if you format system, data and cache the phone storage would just keep hboot and recovery; at that point you could only run RUU to stock or adb sideload from recovery if your CWM version has the feature.
Sent from my HTC6435LVW using xda app-developers app
still problem
Yes have fixed permissions. Also have formatted everything I could in CWM still have problem. Is there a way to format with ADB commands?
So tonight I've run into an issue that confounds me. I am a veteran flasher of roms and kernals and never have I found myself so stuck.
I did the following:
1. I applied Facepalm S-Off to my phone earlier and it worked fine, data still worked.
2. I later went to flash Beastmode. I was running Cubed and forgot to reset to stock before flashing.
3. My phone wouldn't boot. So I flashed back Cubed with Fastboot, and the phone boots.
The issue is that now I have no radio. I see the Verizon Wireless on the lockscreen and there are bars on the top bar, however whenever I try to make a call, it says call ended unexpectedly (paraphrase) and whenever I send a text it says SMS Problems. I have wifi, but I need my phone to work as a phone! It also says "Preparing SIM" every few minutes. Any ideas what could be wrong here?
I am currently on NOS N7 with the included Beastmode Kernel.
Thank you in advance for helping me out! I'm a little lost here.
I really hate to bump things, but I need a phone that is... well a phone. If anyone can help that would be great. I am going to have to go to Verizon if not. I have reset everything including unlock flags to stock in preparation of that sad reality.
flash a stock rom and different kernel
azhockey said:
So tonight I've run into an issue that confounds me. I am a veteran flasher of roms and kernals and never have I found myself so stuck.
I did the following:
1. I applied Facepalm S-Off to my phone earlier and it worked fine, data still worked.
2. I later went to flash Beastmode. I was running Cubed and forgot to reset to stock before flashing.
3. My phone wouldn't boot. So I flashed back Cubed with Fastboot, and the phone boots.
The issue is that now I have no radio. I see the Verizon Wireless on the lockscreen and there are bars on the top bar, however whenever I try to make a call, it says call ended unexpectedly (paraphrase) and whenever I send a text it says SMS Problems. I have wifi, but I need my phone to work as a phone! It also says "Preparing SIM" every few minutes. Any ideas what could be wrong here?
I am currently on NOS N7 with the included Beastmode Kernel.
Thank you in advance for helping me out! I'm a little lost here.
Click to expand...
Click to collapse
I'm having exactly Dane issue after flashing beastmode 4.3, how did you fix it?
Sent from my HTC6435LVW using xda app-developers app
motumbo said:
I'm having exactly Dane issue after flashing beastmode 4.3, how did you fix it?
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Return to lock using "fastboot oem lock"
Download HTC DROID DNA’s RUU.exe, this is a stock firmware by HTC, which contain radio, systems and bootloader.
make sure that your phone is being detected by your computer. then reboot it into bootloader. When you see Fastboot USB in the middle section run the ruu.exe on your computer.
This should repair bootloader and radios.
dragonstalker said:
Return to lock using "fastboot oem lock"
Download HTC DROID DNA’s RUU.exe, this is a stock firmware by HTC, which contain radio, systems and bootloader.
make sure that your phone is being detected by your computer. then reboot it into bootloader. When you see Fastboot USB in the middle section run the ruu.exe on your computer.
This should repair bootloader and radios.
Click to expand...
Click to collapse
Thanks for your answer. I've tried return to stock with success and now my phone is in full stock state but it keeps showing preparing sim card every two or three minutes exactly as it was before. When I switch the phone to 2g the problem is gone, I bought this phone online and I'm a gsm user so I own the most expensive 2g phone in market.
Phone was perfectly working in all roms and almost every kernel, the problem came up just when I flashed beastmod 4.3 kernel then I went into bootloops and I flashed stock kernel and it booted since that I've been with this issue. I'm gonna try different sim cards because I don't believe this is a software issue anymore.
Just got s-off on my DNA but installing a custom Rom makes the phone randomly freeze and reboot. Tried CM11, carbon, and a few others. The time before restarting varies wildly from 10 seconds after boot to 20-30 minutes. It seems more frequent when the screen is on or when plugged into my PC but I could just be imagining things or could be coincidence.
I have flashed and rommed many phones over the years and this one really has me stumped.
I cleared the cache and dalvik and formatted the system partition before installing the Rom and gapps. I have tried multiple roms and multiple versions of gapps as well with no luck. I have superCID of 11111111 from the original unlock process if that makes any difference. I have currently RUUd back to 3.06 for now and it seems perfectly stable on the stock Rom. Any help would be appreciated!
renegadeone8 said:
Just got s-off on my DNA but installing a custom Rom makes the phone randomly freeze and reboot. Tried CM11, carbon, and a few others. The time before restarting varies wildly from 10 seconds after boot to 20-30 minutes. It seems more frequent when the screen is on or when plugged into my PC but I could just be imagining things or could be coincidence.
I have flashed and rommed many phones over the years and this one really has me stumped.
I cleared the cache and dalvik and formatted the system partition before installing the Rom and gapps. I have tried multiple roms and multiple versions of gapps as well with no luck. I have superCID of 11111111 from the original unlock process if that makes any difference. I have currently RUUd back to 3.06 for now and it seems perfectly stable on the stock Rom. Any help would be appreciated!
Click to expand...
Click to collapse
check my thread in the same section, mine started doing this two nights ago. I don't know why it started, my phone was fine prior to this. I did nothing to it, had been running Venom for a while, and two nights ago it started rebooting randomly and wildly. I have switched ROMs twice since then and it has not stopped. Like you said, it tends to be when the screen is on or gets plugged up. But unfortunately mine is doing it a lot on answering phone calls. I don't know if we are having same issure or what.
Possibly
lemonoid said:
check my thread in the same section, mine started doing this two nights ago. I don't know why it started, my phone was fine prior to this. I did nothing to it, had been running Venom for a while, and two nights ago it started rebooting randomly and wildly. I have switched ROMs twice since then and it has not stopped. Like you said, it tends to be when the screen is on or gets plugged up. But unfortunately mine is doing it a lot on answering phone calls. I don't know if we are having same issure or what.
Click to expand...
Click to collapse
I don't know if we are having the same issue it may be that we are though. I am on stock 3.06 not one reboot since I went to work this morning. Get home, install the newest twrp (it is removed in the RUU process), install cm11 snapshot m5, and the appropriate gapps. I got through setup to the point of adding my gmail and it froze and rebooted. I tried cwm recovery too but it made zero difference
TBH my screen is shattered really bad and I was going to replace it but I don't want to if I have to run stock roms forever. I was running one of the original Venom roms before s-off was possible, but then I broke the screen and switched back to my droid bionic but now I can afford the new LCD so I want to get this one running
renegadeone8 said:
I don't know if we are having the same issue it may be that we are though. I am on stock 3.06 not one reboot since I went to work this morning. Get home, install the newest twrp (it is removed in the RUU process), install cm11 snapshot m5, and the appropriate gapps. I got through setup to the point of adding my gmail and it froze and rebooted. I tried cwm recovery too but it made zero difference
TBH my screen is shattered really bad and I was going to replace it but I don't want to if I have to run stock roms forever. I was running one of the original Venom roms before s-off was possible, but then I broke the screen and switched back to my droid bionic but now I can afford the new LCD so I want to get this one running
Click to expand...
Click to collapse
Did you use the proper recovery stated in the thread to flash the rom, have you installed any new apps recently? Does it happen when you run the phone in safemode? Have you tried Performing an RUU and the unlocking and installing a custom rom again?
Did all that
Jaggar345 said:
Did you use the proper recovery stated in the thread to flash the rom, have you installed any new apps recently? Does it happen when you run the phone in safemode? Have you tried Performing an RUU and the unlocking and installing a custom rom again?
Click to expand...
Click to collapse
I have done all of that stuff multiple times
I haven't installed any apps at all on it. This phone is basically brand new, I got it right when they launched. I shattered the screen like 3 days after I got it, and tucked it in a drawer. It has been sitting there ever since.
I have another piece to add to the puzzle. While it has the stock ROM installed it seems to get service and work just fine, but when I install the custom ROMS it has absolutely zero cell connectivity (though WiFi works fine.)
Going into the settings reveals that on the custom roms it shows the IMEI and MEID as Unknown, and the ICCID is listed as Unknown as well. If I try to change the network mode (to LTE/CDMA or any one of the many available options) it says com.phone has crashed.
After the RUU process I have my proper MEID and ICCID showing in the settings panel, and service returns.
Can't flash radio?
After discovering the issues with the service while on custom ROMS I wondered if the radio had something wrong with it.
I tried to manually reflash the radio via fastboot (fastboot flash radio radio.img).
I tried this both in standard fastboot as well as in the rebootRUU mode, but both times I get an error that says remote not allowed. Could my bootloader somehow still be locked? The flag in bootloader mode says "Unlocked" but I unlocked manually after obtaining s-off rather than doing it officially via HTCdev. just trying to explore all options
My phone did that at one point. I had to re-lock and RUU back to 100% stock. I then unlocked my phone with Rumrunner S-Off tool. Flashed a Sense 6 ROM and has been working fine since.
Fixed!
So this problem is fixed!! I am not 100% sure what did the trick, so I will post my solution here in case anybody else experiences a similar issue. I won't go into too much detail with these instructions as all the tools are here: http://forum.xda-developers.com/showthread.php?t=2612740
I first downgraded to the 1.15 hboot and radio. I had to rebootRUU and flash them there as it can't be done directly in fastboot as far as I know.
Do them one at a time (flash the hboot, then reboot-bootloader, then rebootRUU then flash the radio, then reboot bootloader again.)
After doing this I tried to run the RUU exe but it came up with an error that it could not update my phone, so I did the manual Alt 3.06 RUU.
This seemed to work great, restarted the phone and saw the stock rom. I then changed from superCID 11111111 back to the stock CID, relocked my bootloader went back to s-on status. At this point I ran the RUU.exe again just to make sure everything was as stock as could be.
Got that all finished, ran RumRunner again, installed CM11 and no reboot for nearly 24 hours. Pretty sure all is well!
renegadeone8 said:
I don't know if we are having the same issue it may be that we are though. I am on stock 3.06 not one reboot since I went to work this morning. Get home, install the newest twrp (it is removed in the RUU process), install cm11 snapshot m5, and the appropriate gapps. I got through setup to the point of adding my gmail and it froze and rebooted. I tried cwm recovery too but it made zero difference
TBH my screen is shattered really bad and I was going to replace it but I don't want to if I have to run stock roms forever. I was running one of the original Venom roms before s-off was possible, but then I broke the screen and switched back to my droid bionic but now I can afford the new LCD so I want to get this one running
Click to expand...
Click to collapse
thats kinda crazy... i was on bionic before my dna. my screen on DNA is shattered like crazy. thought about going back to bionic temporarily, instead i'm gonna replace my screen and RUU and see if it fixes my problem
lemonoid said:
thats kinda crazy... i was on bionic before my dna. my screen on DNA is shattered like crazy. thought about going back to bionic temporarily, instead i'm gonna replace my screen and RUU and see if it fixes my problem
Click to expand...
Click to collapse
Good news and bad news. The good news is for you!!! I think I figured out what the problem was. It seems to be an issue either with using an older radio, or an older hboot on a newer ROM. I don't know why exactly, but the RUU process was not properly updating my radios. This may be because I ran an RUU while unlocked at one point (every guide I see is very adamant about relocking before the RUU process.)
The bad news is that I ordered a new LCD for my DNA, and I ruined my phone trying to do the repairs. It is by FAR the worst phone I have ever had to work on. I have replaced LCD's in Galaxy devices, Iphones/ipod touches, laptops, TV's, and one in a smartwatch and have never hurt a thing. Got my DNA back together and it flat out wont turn on I don't know what the problem is, but something is fried. Hope you have better luck than me!