Okay so i used a modem upgrade ML1 to flash a rom, Now my wireless is useless.
I have other phones same make/model/series that I can get the modem info from but I don't know how to do it. Any help would be appreciated.
http://forum.xda-developers.com/showthread.php?t=2583217
https://www.dropbox.com/s/mw95pt9u6wue33t/S960L.zip
es0tericcha0s said:
http://forum.xda-developers.com/showthread.php?t=2583217
https://www.dropbox.com/s/mw95pt9u6wue33t/S960L.zip
Click to expand...
Click to collapse
i already tried the first thread im trying the drop box now thank you
Both files end up in "installation aborted"
You're using Odin, right...?
es0tericcha0s said:
You're using Odin, right...?
Click to expand...
Click to collapse
I have ODIN but i dont know how to use it i thought they were zip installs from recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_S960LWYAMD6_S960LTFNAMD6_1151419_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Did you run Odin as admin? I'd try Mobile Odin to just flash the modem file in the other zip.
After running as admin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_S960LWYAMD6_S960LTFNAMD6_1151419_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Related
Hi,
After a failing to update my OS to JellyBean and losing my IMEI number, I've now got to the point where I can only boot into download mode and can't even get into CWM recovery mode! I'm trying to flash a ROM to it using ODIN but it keeps failing with the info below. Please can somewhere point me in the right direction!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> cache.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
glenf said:
Hi,
After a failing to update my OS to JellyBean and losing my IMEI number, I've now got to the point where I can only boot into download mode and can't even get into CWM recovery mode! I'm trying to flash a ROM to it using ODIN but it keeps failing with the info below. Please can somewhere point me in the right direction!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> cache.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I9100G or I9100?
If I19100G try another usb port/cable/pc.
It's an I9100, I've just tried a different port and it still failed - do you think it's worth trying a different cable too? It takes about 5 minutes before it fails.
Thanks
Well...you're flashing an I9100G ROM there.......get a I9100 ROM.
Sent from the little guy
I've tried these ones so far:
GT-I9100_XEU_I9100XWLPT_I9100XEULPA_I9100XXLQ6_Original
I9100GXXLSR_I9100GXEFLSR_XEF
I9100XWLS8_I9100FOPLS3_FOP
are they all I9100G ROMs?
Thanks
fop and lq6 are I9100.
Sent from the little guy
They're all producing the same error... any ideas? Or have I completely knackered it?!
Thanks
Could be nand corruption, keep trying:
Original s2 cable
clean uninstall kies and reinstall (your uninstaller pro or similar)
Another Pc/laptop
Disable antivirus
Usb ports
Flash siyah v5
3 different odin versions.
Sent from the little guy
kies should be off
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from the little guy
hi, I can access clockworkmod/odin mode but nothing will flash to the flipping phone, is this a semi brick???
I cannot access internal memory or format internal memory!
Am I screwed?
if you can enter download mode, you are not screwed. just flash a stock rom via odin. :good:
What recovery ??
jje
sriram231092 said:
if you can enter download mode, you are not screwed. just flash a stock rom via odin. :good:
Click to expand...
Click to collapse
Cannot flash stock rom
why not? provide info.
Glebun said:
why not? provide info.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://dl.dropboxusercontent.com/u/6396156/2013-06-01 03.57.21.jpg
Keep getting these kind of errors!
you said, you cannot flash stock ROM via Odin. I asked why not, and you're showing me pictures of recovery, why?
Sent from my GT-I9300 using Tapatalk 4 Beta
Glebun said:
you said, you cannot flash stock ROM via Odin. I asked why not, and you're showing me pictures of recovery, why?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Sorry, was not near the computer:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMC2_I9300METEMC1_I9300XXEMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Above was with odin3V1.85
Below is with Odin3V3.07:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMC2_I9300METEMC1_I9300XXEMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Reads as possible bad file flashed .
Or a damaged NAND = new motherboard required .
jje
Tried multiple files, no joy, samsung wont even look at the phone because of the binary counter
Am I screwed?
slim19198 said:
Tried multiple files, no joy, samsung wont even look at the phone because of the binary counter
Am I screwed?
Click to expand...
Click to collapse
No pay for a repair or see multiple changed motherboard posts and DIY .
jje
Hello guys! Device - Galaxy xcover (S5690)
Im unable to flash via odin, it always fails. I have put costume recovery wiped everything and flashed again but fails. Would try to put a costume rom but there isnt any :/...Even triend few odin versions on windows 7 and 8. So now dont know should i try with the PIT and if yes which one to use, would be great if anyone can help. Here some info...
On the device is flashed a costume rom for another phone that caused the brick.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5690XXLL1_S5690DBTLL1_S5690XXLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> PINMUX.bin
<ID:0/010> NAND Write Start!!
<ID:0/010> TIM_loke3.bin
<ID:0/010> TAVOR_DSP.bin
<ID:0/010> rf_plugin.bin
<ID:0/010> Bootlogo.img
<ID:0/010> zImage
<ID:0/010> ramdisk.img
<ID:0/010> ramdisk-recovery.img
<ID:0/010> system.img
<ID:0/010> pxafs.img
<ID:0/010> param.lfs
<ID:0/010> Arbel_CP.bin
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hope someone can help, thanks!
Solved
Used this firmware "GT-S5690_XXKL1_XXKL1_PROKL1_home" inside are 4 files: Boot, PDA, Phone and CSC. I used the last 3 including PIT "Marvell_Partition" so without Bootloader. Also I uesd Odin v3.04
Firmware - http://downloads.k0k0.de/index.php?dir=MobilePhones/Devices/Samsung/GT-S5690/OS/
PIT - http://www.honorem-productions.de/download.php?f=Marvell_Partition.zip
No idea is it available to post those links, if not pls delete
Hi there
Got strange problem with my friend's Galaxy S2 I9100.
One day it gone hot and then turned off. Now it stucks in Samsung Galaxy SII logo and when I get into recovery I have a lot of red warnings (photo below):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to flash stock ROM, but Odin can't flash it:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XXMS7_I9100OXAMS7_I9100XXMS2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried on Odin 1.3, 1.83, 1.85 and 3.09 - all the time the same error.
Tried to flash PIT file with KI3 3-file firmware but..
Code:
<ID:0/025> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/025> Odin v.3 engine (ID:25)..
<ID:0/025> File analysis..
<ID:0/025> SetupConnection..
<ID:0/025> Initialzation..
<ID:0/025> Set PIT file..
<ID:0/025> DO NOT TURN OFF TARGET!!
And nothing else.......
Phone gets into Download Mode or stucks in Samsung Galaxy SII logo.
Now I can't get into recovery :/
As my friend told me, he had Android ICS on it so I think he had insane chip with brickbug.
But.. he didn't flash any custom roms, custom kernels etc. He only upgraded his i9100 from GB to ICS.
Any ideas? :crying: :crying: :crying: :crying:
Unfortunately, I think your motherboard is fried. The only thing that may help is repartitioning as a final resort, but I would say you are up for a new motherboard or phone
Re-partioning is impossible :/
Wysłane z mojego SM-G900F przy użyciu Tapatalka
Not necessarily true.......
There is a thread somewhere on XDA that details a process where the corrupted memory blocks can be discovered and bypassed.....effectively repartitioning the memory.......
Sent from my rooted, debloated stocKK kn0x0 SM-G900F
But I cant re partition
Wysłane z mojego SM-G900F przy użyciu Tapatalka
Ah.....My bad....The process I mentioned relies on the ability to get into recovery....and you said you can't.......
BTW......Your user name @Bruce666
not referencing a metal band by any chance?
Bruce (Dickinson)
666 (The Number of the Beast)
Sent from my rooted, debloated stocKK kn0x0 SM-G900F
keithross39 said:
Ah.....My bad....The process I mentioned relies on the ability to get into recovery....and you said you can't.......
BTW......Your user name @Bruce666
not referencing a metal band by any chance?
Bruce (Dickinson)
666 (The Number of the Beast)
Sent from my rooted, debloated stocKK kn0x0 SM-G900F
Click to expand...
Click to collapse
no I'm not referencing anything and anyone
Hi there,
I have rooted my Samsung Galaxy S2 Plus using this guide: [HOW TO ROOT] Samsung Galaxy SII Plus
After rooting, my touch buttons not working .. Sometimes it works for just moments
It's my phone info
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Says Model Number is : GT-I9105P
When phone login the logo shows Model Number is GT-I9105P
but when i removed battery i found this info
Model Number : GT-I9105
Finally i tried to download Stok Firmware For GT-I9105 One file and Full 4 Files
But Odin Says Failed and shows this report
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_I9105XXUBMH2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9105XXUBMH4_1356917_REV05_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9105XXUBMH2_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXE_I9105OXEBMH3_1356917_REV05_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> BcmBoot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse