I have erased my cache, dalvik cache, and data and flashed the latest stable ROM (6.3) using Clockwork Mod. After flashing my P500's 3G stopped working.
In Wireless & Networks -> Mobile networks, The button "Data enabled" is check-marked.
Does anyone know a method of getting my phone's 3G to work again?
btw I purchased this phone from Koodo Mobile in Canada.
RaskloP said:
I have erased my cache, dalvik cache, and data and flashed the latest stable ROM (6.3) using Clockwork Mod. After flashing my P500's 3G stopped working.
In Wireless & Networks -> Mobile networks, The button "Data enabled" is check-marked.
Does anyone know a method of getting my phone's 3G to work again?
btw I purchased this phone from Koodo Mobile in Canada.
Click to expand...
Click to collapse
I have used Mik's ROM. I won't say I lost 3G but yes I have seen that sometimes the cell will stay in 2G mode for some time even though 3G signals will be available.
Reboot resolves the issue most of the time.
well i had trouble with it before .. but u can force ur network to be in 3g only by notification settings wich can access via cyanogenmod settings... try it...
3g works on my O1.
I change the connection between 2g-2g/3g-3g from the notification bar.
I don't think that enabling data is relevant.
I've tried rebooting the phone, reflashing the ROM, taking out my battery and SIM card, enabling the power widget and forcing 3G with data enabed and no luck so far.
Whenever I open the browser it greets me with "No network connection: Browser cannot load this page because there is no Internet connection."
I would also like to state that the title for this thread is a bit of a misnomer as it's not only 3G since I can't receive data at all, even if I try and force 2G.
Would anyone have more advice?
Also just to clarify data was working under stock froyo.
Android version: 2.3.3
Baseband version: v07u-000-000-MAR-23-2009
Kernel version: 2.6.32.9 [email protected] #98
Mod version: CyanogenMod-7.0.2-Thunderg-mik
Build number: GINGERBREAD.eng.mik.20110426.184812
I m from pune and,Recently I activated airtel 3g in my samsung galaxy ace... Bt problem is that I m not getting 3g signal.
In samsung galaxy 3 there are options like dual mode/3g mode,bt in galaxy ace when I go in mobile networks there are this options : enable packet data, data roaming, access point name, mobile operator, use only 2g networks.according to airtel customer care I should chk on enable packet data and unchk on use only 2g network options I did so bt still can't get 3g,signals..
I tried to use 3g signals in many places in pune..bt still I m jst,getting edge connection
Are you sure there is 3G network? If so, did you make sure that in APN list there is the one provided by your carrier for 3G ?
mastrone said:
Are you sure there is 3G network? If so, did you make sure that in APN list there is the one provided by your carrier for 3G ?
Click to expand...
Click to collapse
Yups I m sure that here in pune there is a 3g network and as I said I have already unchkd use only 2g network option..bt still can't get 3g signal...so is there any additinal settings that I mst do...
vj1 said:
Yups I m sure that here in pune there is a 3g network and as I said I have already unchkd use only 2g network option..bt still can't get 3g signal...so is there any additinal settings that I mst do...
Click to expand...
Click to collapse
Have you checked your APN settings?
Uncheck 2g mode only. If still you not see 3g symbol at left side of signal then in network setting go network operators and search available networks and choose airtel 3g.if still not get then go into keypad and type *#*#4636#*#* and select option phone imformation and in that you see gsm auto selected. In that choose wcdma only and press turn off radio then press turn on radio now press home button(not back button). You will get 3g. If not then reboot. I hope this will help you
You are using the wrong ROM or MODEM file with a Band Operator that's not supported for your company. Review the frecuency of your operator for 3G. Then, flash your phone with the correct ROM.
Hello everybody!
I installed the rom version 2.3.4 (vivo - Brazil) in my galaxy s5830L (3g 850/1900MHz). My mobile carrier works with 3G 2100MHz, so I can not connect to 3G only 2G (edge).
Do you know if there is any possibility to enable 2100MHz in s5830L 3G?
Thank you!
nims11 said:
Uncheck 2g mode only. If still you not see 3g symbol at left side of signal then in network setting go network operators and search available networks and choose airtel 3g.if still not get then go into keypad and type *#*#4636#*#* and select option phone imformation and in that you see gsm auto selected. In that choose wcdma only and press turn off radio then press turn on radio now press home button(not back button). You will get 3g. If not then reboot. I hope this will help you
Click to expand...
Click to collapse
Hey really thnks for ur help...bt I want to clear some doubts see as u said i mst select airtel 3g bt problem is in network operators I m jst getting airtel option not airtel 3g.
And in second method after entering that code u said to press home button is it the that big middle button..and how to again stop 3g...
Most imp I chked in samsung monte with same sim card of airtel in same area bt in that mobile 3g signal came immediately...
See I know I m asking u many ? Bt plz try to understand I'm new to this!!
iceman2029 said:
You are using the wrong ROM or MODEM file with a Band Operator that's not supported for your company. Revieew the frecuency of your operator for 3G. Then, flash your phone with the correct ROM.
Click to expand...
Click to collapse
How to review frequency of operator for 3g..
And one more thing when I tried with same sim card in same area on samsung monte I immediately got 3g signal jst after selecting 3g mode..so I want to know do u still think there is a problem with rom....
Hey I tried ur method of dialing that code and then changing it to WCDMA mode ..after selecting this option for some time in status it shows no connection like a white circle with cross line in it and after few seconds it again shows Edge connection ..and again u enter that code in that network type option it again automatically gets change to gsm auto!!
Now I m really getting frustrated by this problem I called Samsung helpline they said for using 3g in some mobiles u have to do a Software Update in Samsung Service centre after which u will get that 3g/dual network mode option in ur Mobile network settings like other mobiles, bt I doubt if they can really help me bcozz about 2 months ago I had already done a Firmware update earlier its version was KC1 and after update its version is KC7 which i think is the latest version of Firmware available in India for Samsung galaxy ace. I said this to Samsung technical Support but they say that Software update and Firmware Update are completely Differnet things…
So I want to know whether this Software update and Firmware update are this realy different Or its same. I have also Noticed one more thing in “Samsung galaxy Fit “also there is no Option like 3g/dual Network mode to Enable 3g!! is that option diabled in all galaxy Ace & Fit models or is it only in my cell???
Hey I tried ur method of dialing that code and then changing it to WCDMA mode ..after selecting this option for some time in status it shows no connection like a white circle with cross line in it and after few seconds it again shows Edge connection ..and again u enter that code in that network type option it again automatically gets change to gsm auto!!
Now I m really getting frustrated by this problem I called Samsung helpline they said for using 3g in some mobiles u have to do a Software Update in Samsung Service centre after which u will get that 3g/dual network mode option in ur Mobile network settings like other mobiles, bt I doubt if they can really help me bcozz about 2 months ago I had already done a Firmware update earlier its version was KC1 and after update its version is KC7 which i think is the latest version of Firmware available in India for Samsung galaxy ace. I said this to Samsung technical Support but they say that Software update and Firmware Update are completely Differnet things…
So I want to know whether this Software update and Firmware update are this realy different Or its same. I have also Noticed one more thing in “Samsung galaxy Fit “also there is no Option like 3g/dual Network mode to Enable 3g!! is that option diabled in all galaxy Ace & Fit models or is it only in my cell???
After selecting wcdma only turnoff radio and again turn on radio then push middal button called home button. When you doesnt want 3g mode tick on 2g mode only.
I also suffer from same problem when i use bsnl3g. You should camplain in airtel servise center because it is not fault of mobile but fault of network provider. If you want to chek then insert other sim and uncheck on 2g only and select access poit . If you get 3g then your mobile is not in fault. I want to know that you get 2g internet on that airtel card? And you choose access point?if not then select access point
nims11 said:
After selecting wcdma only turnoff radio and again turn on radio then push middal button called home button. When you doesnt want 3g mode tick on 2g mode only.
I also suffer from same problem when i use bsnl3g. You should camplain in airtel servise center because it is not fault of mobile but fault of network provider. If you want to chek then insert other sim and uncheck on 2g only and select access poit . If you get 3g then your mobile is not in fault. I want to know that you get 2g internet on that airtel card? And you choose access point?if not then select access point
Click to expand...
Click to collapse
dude i think u are not reading my posts completely..i can say this bcozz right from my first post of this thread i m mentioning that with same sim card of airtel i m getting edge connection..and the problem is not with sim card its with cell itself bcozz when i tried same sim card in other mobile i immediately got 3g signal in same area..that bcozz after lots of search on google i saw that many are facing this problem of 3g not connecting..its due to a software bug in froyo 2.2.1 so people say only way to solve this problem is we will have to upgrade our froyo to 2.3.3 or 2.3.4 this might solve our problems bt still i have some queries which i have to clear like see if u can ans them :
1. which one will be better to go with android 2.3.3 Gingerbread or 2.3.4 Gingerbread for Samsung galaxy ace I mean which one has less problems and will solve my 3g problem!!
2. after unofficially upgrading to 2.3.3 or 2.3.4 will I be able to officially upgrade to 2.3.5 through kies in future.
3. For upgrading to 2.3.3 or 2.3.4 is it necessary to root the phone..
4. how much time does a whole upgrade process takes if my internet speed is Minimum 1Mbps…
5. How to come back to 2.2.1 Froyo Default version from 2.3.3 or 2.3.4(Steps with video or Img link will be very helpful)
Update to 2.3.4 is realy easy and not require root. You should first download 2.3.4 flash file and after download use odin to install flash file. When official update comes you can downgrade your phone to froyo so kies update it to latest version so chill.
My email is [email protected]
contact me i will explain you how to update to 2.3.4 and where to download
nims11 said:
Update to 2.3.4 is realy easy and not require root. You should first download 2.3.4 flash file and after download use odin to install flash file. When official update comes you can downgrade your phone to froyo so kies update it to latest version so chill.
My email is [email protected]
contact me i will explain you how to update to 2.3.4 and where to download
Click to expand...
Click to collapse
K gr8 ..jst 2 questions how to downgrade back to froyo 2.2.1 I mean steps... And secondly does 2.3.4 gives any problem I mean any hangs, etc...
2.3.4 not hang atall. It remove lags from many games. I use it from 2 months and not get any problem. So just update. And abowt downgrade i post in my blog tomorrow. I hope you undarstand because you need to flash two firmware to get ddkc1(indian firmware)firmware back. So wait for that. But i ensure you that you will not downgrade in near future because gingerbread rocks
its due to a software bug in froyo 2.2.1 so people say only way to solve this problem is we will have to upgrade our froyo to 2.3.3 or 2.3.4 this might solve our problems bt still i have some queries which i have to clear like see if u can ans them :
Click to expand...
Click to collapse
Strange I use the same phone no issues getting 3G here in Mumbai on a Vodaphone network. In my phone under settings - wireless and network settings- Mobile Networks- the option of use only 2G networks is unchecked. Let us know if the firmware update rectifies the issue....
hey Dude any idea wat are Apn Settings for Airtel 3g ..
i mean :
Access Point name: ??
APN:??
Hi.
I bought ace S5830 from USA (and this phone only support 850/1900 Mhz), but i live in Azerbaijan and here I use mobile operator sim that only have 2100 mhz band for 3G network. Logically, my phone can not connect to 3G network. My question,
1.is it possible change the band?
2. If it is possible, how we can change, upgrade to new firmware ?
p.s. I have upgraded it to GINGERBREAD.UBKP7
Please help me to solve these issue,
Thank you before hand.
plese help me with problem above
HI, I have a problem withe Internet connection in my phone. I bought it in Three Ireland and there was no possibility to change between 3G and Gsm. So i flashed new KI3 stock rom and then I was possible to do it. After I flashed the Batista rom and when I changed it to GSM I got a message that I lost internet connection and R icon over signal bars. Phone was showing GSM connection but there was no Internet in the phone. I changed it back to Auto but that R was still there and no internet. I recovered my stock firmware but it didn't solve the problem. I went to Settings->Wireless and network->Mobile networks->Network operators and chose 3 (3G) network. It helped but when I turned off the data I got that R letter and after turning it back on only GSM and no internet. Anybody know the reason? Thanks for help.
midasziom said:
HI, I have a problem withe Internet connection in my phone. I bought it in Three Ireland and there was no possibility to change between 3G and Gsm. So i flashed new KI3 stock rom and then I was possible to do it. After I flashed the Batista rom and when I changed it to GSM I got a message that I lost internet connection and R icon over signal bars. Phone was showing GSM connection but there was no Internet in the phone. I changed it back to Auto but that R was still there and no internet. I recovered my stock firmware but it didn't solve the problem. I went to Settings->Wireless and network->Mobile networks->Network operators and chose 3 (3G) network. It helped but when I turned off the data I got that R letter and after turning it back on only GSM and no internet. Anybody know the reason? Thanks for help.
Click to expand...
Click to collapse
Q: Where are you located now?
The sim is roaming, same as mine, as I am out of the UK and have the small R showing. You also have the phone ex Ireland, so it will be configured for there.
If you are in the UK then you will have to change the rom to a stock UK one, including the csc.
Are you on a UK sim?
No, I am in Ireland all the time where I bought the phone. I got that when I changed form Auto mode to Gsm in data settings. Then I got the message Internet connection lost and R letter over signal bars. When I switched back to Auto mode still had that R and no internet. I had to chose manually network operator to 3 (3G) to get it back working.
If you are in the UK then you will have to change the rom to a stock UK one, including the csc.
NO just change the CSC to UK version if problems or enter network settings manually .
jje
I am in Republic of Ireland not in the UK. CSC is stock all the time: XEU.
I briked my phone recently" after instaling chainfire 3D",i dont know what ROM version i had before that but i used ODIN to recover my phone ussing another version of ROM.I managed to find FROYO 2.2 available(support) for my country( Romania),but i noticed that mobile network is not working anymore(except Wi Fi),
before this mess the 3G ,GPRS or EDGE signal was present and i have the option to turn on or off the mobile connection,but now i cant do that anymore and i dont have 3G signal anymore,and I dont know why because i have the correct settings in APN. In "About phone" / "status" i have the following values:Mobile network type: UMTS or GPRS from time to time, and for Mobile network state is DISSCONECTED or Connecting from time to time.When i long press the end call button the Phone option appears and when i chose Mobile Network option (Connect to internet is OFF) it does nothing....Can anyone help me in this problem ?,some say that there is a secret code for service that test the 3G conecction but i dont belive that......?..For this reason(problem) i installed four different versions of ROM,and my best option is to manage to find a solution for the current ROM that i have)Sorry for my english or for my posible double post...
I found the official stock ROM i had before and fixed the problem with 3G signal,Is very important to use the correct ops file,i used EUROPA_I5508_v1.0.ops(because i'm an idiot) and the one i needed was EUROPA_I5500_v1.0.ops and i think that is one of the reason for the lost of 3G signal.
Hi everybody!
I'm using a SGS III SHV-E210S (Korean LTE) running the official 4.4.4 KitKat ROM. I have been able to connect to the 2G network in my country in Africa since I got this phone. However, all the mobile networks here changed to 3G a few weeks ago, and since I have been unable to connect to the data network.
The only way I have been able to have my data connection working is by changing the network mode in the Hidden Menu from default "LTE 850 Preferred" to "GSM ALL", but this only gives me access to the slower 2G connection. All other options show 3G but the phone has no Internet connection.
I thought maybe be it could be a baseband incompatibility issue in the stock 4.4.4 firmware? So I tried flashing the modem for 4.3 on to my phone but no success with that either. Is there any fix available for this problem?? Any links where I can get it as well will be highly appreciated.
Thanks in advance.
Peace