hello,
i'm using htc one x+ (enrc2b) ..as i installed cyanogenmod 11 snapshot nd completed the process successfuly..but iam unable to launch cyanogenmod through switching on the device or by reboot..the cm logo goes on spining..but while selecting recovery in bootloader cyanogenmod launches and works fine..and even in soft reboot its working fine.. but in normal power on or reboot facing the problem..
please help me out....thanks in advance
htcluvr said:
hello,
i'm using htc one x+ (enrc2b) ..as i installed cyanogenmod 11 snapshot nd completed the process successfuly..but iam unable to launch cyanogenmod through switching on the device or by reboot..the cm logo goes on spining..but while selecting recovery in bootloader cyanogenmod launches and works fine..and even in soft reboot its working fine.. but in normal power on or reboot facing the problem..
please help me out....thanks in advance
Click to expand...
Click to collapse
Did you flash the boot.img? If yes, did you wipe /system, /data and /cache in before installing the rom?
yes
htcluvr said:
hello,
i'm using htc one x+ (enrc2b) ..as i installed cyanogenmod 11 snapshot nd completed the process successfuly..but iam unable to launch cyanogenmod through switching on the device or by reboot..the cm logo goes on spining..but while selecting recovery in bootloader cyanogenmod launches and works fine..and even in soft reboot its working fine.. but in normal power on or reboot facing the problem..
please help me out....thanks in advance
Click to expand...
Click to collapse
reaper90 said:
Did you flash the boot.img? If yes, did you wipe /system, /data and /cache in before installing the rom?
Click to expand...
Click to collapse
yes, i flashed the boot.img from cm zip & before and after installing the cm i wiped sys,chache nd dalvike chache..but cm is working only in recovery mode..why..?? pls help me out..tanx in advance
Which recovery are you using? I flashed cm11 snapshot just yesterday with twrp and flashed boot.img from the zip and it's fine.. I came from viper x+ 2.1.1 btw..
Try changing your recovery..
Hope this helps
htcluvr said:
yes, i flashed the boot.img from cm zip & before and after installing the cm i wiped sys,chache nd dalvike chache..but cm is working only in recovery mode..why..?? pls help me out..tanx in advance
Click to expand...
Click to collapse
how long did you wait for first time boot? this may take some more time. also, you need latest TWRP 2.8.0.2 or CWM 6.0.4.8 to install 4.4 roms. then follow these simple steps:
1. flash boot.img in fastboot
2. in recovery, wipe /system, /cache, /data (without /media)
3. install rom.zip file and gapps package of your choice.
Related
SOLVED
hi, sorry bad english
i got a htc desire x and begann to read this tut about unlockinging, rooting, installing custom roms
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
i unlocked and rooted the dx, then i installed this rom: STOCK Jelly Bean with Sense 4+ build 2.20.401.6 for Desire X
http://forum.xda-developers.com/showthread.php?t=2239511
were not so happy, would try this one: ViMiRo ROM v1.0-1
http://forum.xda-developers.com/showthread.php?t=2797110
did a full wipe, installed the vimiro rom, Flashed boot.img from zip via fastboot and rebooted
but then the dx stuck on the cyanogenmod logo and nothing more happen
has anyone please a solution for this, or some tipps
SOLVED
4js said:
hi, sorry bad english
i got a htc desire x and begann to read this tut about unlockinging, rooting, installing custom roms
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
i unlocked and rooted the dx, then i installed this rom: STOCK Jelly Bean with Sense 4+ build 2.20.401.6 for Desire X
http://forum.xda-developers.com/showthread.php?t=2239511
were not so happy, would try this one: ViMiRo ROM v1.0-1
http://forum.xda-developers.com/showthread.php?t=2797110
did a full wipe, installed the vimiro rom, Flashed boot.img from zip via fastboot and rebooted
but then the dx stuck on the cyanogenmod logo and nothing more happen
has anyone please a solution for this, or some tipps
Click to expand...
Click to collapse
what recovery version do you have \ installer ? and post your bootloader details
the rom vimiro has not cyanogenmod logo
[
nek46 said:
what recovery version do you have \ installer ? and post your bootloader details
the rom vimiro has not cyanogenmod logo
Click to expand...
Click to collapse
recovery = twrp 2.6.30
bootloader details - not sure what you mean?
maybe this: hboot 1.25.002
i thought that the vimiro has no cm logo, but when i flashed the rom and fastboot the boot.img i got no errors, it says sucessfully and ok
4js said:
[
recovery = twrp 2.6.30
bootloader details - not sure what you mean?
maybe this: hboot 1.25.002
i thought that the vimiro has no cm logo, but when i flashed the rom and fastboot the boot.img i got no errors, it says sucessfully and ok
Click to expand...
Click to collapse
everything is correct, try another rom, I do not understand why not start the rom
4js said:
hi, sorry bad english
i got a htc desire x and begann to read this tut about unlockinging, rooting, installing custom roms
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
i unlocked and rooted the dx, then i installed this rom: STOCK Jelly Bean with Sense 4+ build 2.20.401.6 for Desire X
http://forum.xda-developers.com/showthread.php?t=2239511
were not so happy, would try this one: ViMiRo ROM v1.0-1
http://forum.xda-developers.com/showthread.php?t=2797110
did a full wipe, installed the vimiro rom, Flashed boot.img from zip via fastboot and rebooted
but then the dx stuck on the cyanogenmod logo and nothing more happen
has anyone please a solution for this, or some tipps
Click to expand...
Click to collapse
Try flashing another kernel. You somehow flashed the CM boot.img.
nightwalkerkg said:
Try flashing another kernel. You somehow flashed the CM boot.img.
Click to expand...
Click to collapse
Not quite... If he flashed CM boot.img for Sense ROM, he shouldn't see boot animation at all. What he obviously did is flashing a CM ROM and CM boot.img, but one that won't boot the CM ROM. Bootanimation is part of the ROM, not of kernel... So what I would suggest for @4js: Redownload ViMiRo Rom, also redownload any Sense JB kernel from Original Development you like, wipe your phone and reflash everything. That should solve your issues.
nek46 said:
everything is correct, try another rom, I do not understand why not start the rom
Click to expand...
Click to collapse
i tried [ROM][PA 2.99][4.1.2] Paranoid Android UNOFFICIAL [protou] with the double wipe and the gapps and finally
i now stuck at the new paranoid android logo,
nightwalkerkg said:
Try flashing another kernel. You somehow flashed the CM boot.img.
Click to expand...
Click to collapse
i did not, i really double checked it
dansou901 said:
Not quite... If he flashed CM boot.img for Sense ROM, he shouldn't see boot animation at all. What he obviously did is flashing a CM ROM and CM boot.img, but one that won't boot the CM ROM. Bootanimation is part of the ROM, not of kernel... So what I would suggest for @4js: Redownload ViMiRo Rom, also redownload any Sense JB kernel from Original Development you like, wipe your phone and reflash everything. That should solve your issues.
Click to expand...
Click to collapse
i will try and give feedback
not succeded
got it cheap from 2nd hand, could a hardware defect cause the problems?
4js said:
not succeded
got it cheap from 2nd hand, could a hardware defect cause the problems?
Click to expand...
Click to collapse
ok, what exactly did you try?
cause im a beginner in flashing smartphones, there are some things i don't understand
1) when i do a factory reset with twrp 2.6.3.0, there should be wiped data, cache and dalvik, .android_secure
but when i afterwards do a advanced wipe everything succeded, exept dalvik cache, there it fail
2) after a succeded factory reset without os installed, i reboot, and then also i stuck at a boot logo
shouldn't that not be wiped too?
could an other recover.img from http://forum.xda-developers.com/showthread.php?t=2502327 help?
the last succesful rom installed was cm-10.1-20140624-UNOFFICIAL-protou_v2.zip, not the one i wrote in first post
@dansou901
i tried different roms, exactly how it was explained, but never succedded, after rebooting i always stuck at the boot logo
4js said:
cause im a beginner in flashing smartphones, there are some things i don't understand
1) when i do a factory reset with twrp 2.6.3.0, there should be wiped data, cache and dalvik, .android_secure
but when i afterwards do a advanced wipe everything succeded, exept dalvik cache, there it fail
2) after a succeded factory reset without os installed, i reboot, and then also i stuck at a boot logo
shouldn't that not be wiped too?
could an other recover.img from http://forum.xda-developers.com/showthread.php?t=2502327 help?
the last succesful rom installed was cm-10.1-20140624-UNOFFICIAL-protou_v2.zip, not the one i wrote in first post
@dansou901
i tried different roms, exactly how it was explained, but never succedded, after rebooting i always stuck at the boot logo
Click to expand...
Click to collapse
Try the TWRP 2.5.0.0 for JB, it is reported to be most stable. Hopefully this resolves the issues for you.
dansou901 said:
Try the TWRP 2.5.0.0 for JB, it is reported to be most stable. Hopefully this resolves the issues for you.
Click to expand...
Click to collapse
thanks for quick reply, i will try and give then feedback
twrp 2.5.0.0 did it
it was a really full wipe, and now i'm at vimiro 1.01
thanks to everybody for the help, special thanks to dansou901 for helping and his excellent tutorial
i have samsung s2 GT-I9100, version of 4.2.2, I9100XXMS2, im using Omega v13 rom, i want to change it to cm11 kitkat version, i dont know the steps, i cant just flash it using cwm 6.4, always says aborted, cant open the zip file of cm11 pls help TIA
yrragarry said:
i have samsung s2 GT-I9100, version of 4.2.2, I9100XXMS2, im using Omega v13 rom, i want to change it to cm11 kitkat version, i dont know the steps, i cant just flash it using cwm 6.4, always says aborted, cant open the zip file of cm11 pls help TIA
Click to expand...
Click to collapse
First make a rom backup of your 4.2.2 incase if something goes wrong and you want to restore back.
Then download the latest recovery version, twrp or cyanogenmod
Download cm11
Flash the newest recovery,
Reboot into recovery
Format data/factory reset
Wipe /system
Wipe /dalvik-cache
Flash cm11
Flash kitkat gapps
Reboot.
Enjoy cm11.
The reason why you need latest recovery is because cm11(kitkat) needs selinux enabled recoveries, else it will say something like aborted, set_metadata_recursive failed.
Goodluck with flashingcm11!
wulsic said:
First make a rom backup of your 4.2.2 incase if something goes wrong and you want to restore back.
Then download the latest recovery version, twrp or cyanogenmod
Download cm11
Flash the newest recovery,
Reboot into recovery
Format data/factory reset
Wipe /system
Wipe /dalvik-cache
Flash cm11
Flash kitkat gapps
Reboot.
Enjoy cm11.
The reason why you need latest recovery is because cm11(kitkat) needs selinux enabled recoveries, else it will say something like aborted, set_metadata_recursive failed.
Goodluck with flashingcm11!
Click to expand...
Click to collapse
tnx for the reply sir, but i already tried this way for many times, the file cm11 nightly always aborted,not continuing the updating, is there any ways or steps?
yrragarry said:
tnx for the reply sir, but i already tried this way for many times, the file cm11 nightly always aborted,not continuing the updating, is there any ways or steps?
Click to expand...
Click to collapse
Is it corrupt maybe?
Did you downloaded cyanogenmod for the right device?(Probably you have but just in case)
Are you really using the latest recovery?
Better way, what error does it shows, why does it aborts.
yrragarry said:
tnx for the reply sir, but i already tried this way for many times, the file cm11 nightly always aborted,not continuing the updating, is there any ways or steps?
Click to expand...
Click to collapse
YOu need to first install Kitkat compatible cwm recovery to install kitkat rom in i9100 .. So first download i9100kitkat compatable recovery (google the same to find it) flash it via odin or normal and reboot recovery now .. Now you can full wipe, wipe cache data partitions format system and flash the laest cm11 + gapps with out any problems
[Q] Stuck at "Warning Bootloader Unlocked" screen after flashing CyanogenMod 12.1
Please help..
I flashed Cm 12.1 24-6-2015 nightly over other nightly previously released..
wiped everything before and after flashing..
then rebooted system...
now it does not go ahead...
What to do ???
Please help...ASAp:crying::crying::crying::crying:
#varunpatil said:
Please help..
I flashed Cm 12.1 24-6-2015 nightly over other nightly previously released..
wiped everything before and after flashing..
then rebooted system...
now it does not go ahead...
What to do ???
Please help...ASAp:crying::crying::crying::crying:
Click to expand...
Click to collapse
Installed themes? Anyway, goto TWRP RECOVERY, WIPE only SYSTEM and flash new nightly and reboot. .. See if boots
Adarsh1998 said:
Installed themes? Anyway, goto TWRP RECOVERY, WIPE only SYSTEM and flash new nightly and reboot. .. See if boots
Click to expand...
Click to collapse
i wiped everything..
now its showing no os installed
what to do??
help..im noob
#varunpatil said:
i wiped everything..
now its showing no os installed
what to do??
help..im noob
Click to expand...
Click to collapse
Flash the rom zip again, see if zip downloaded correctly.
Adarsh1998 said:
Flash the rom zip again, see if zip downloaded correctly.
Click to expand...
Click to collapse
ha......it worked....i flashed again the same ROM... thanks
try rebooting via recovery and then restore the backup if u took any.
then flash it again. this should work.
Hey guys, did anyone encounter some problems when trying to wipe data/do a factory reset using the Cyanogen Recovery? After I updated from CM 12 to CM 12.1 I wanted to do a factory reset. Selecting "Wipe data" got me an error. Upon accessing "logs", I could find that it couldn't mount or find the volume /misc. Oh, and BTW, I can flash CM Updates just fine. I flashed some CM 12.1 compatible Gapps, but they are not working (Google Play Services/Store is not working). That's why I wanted to do a factory reset and then flash Gapps. What can I do now, in order to make it work again?
Anyone?
bv31top said:
Hey guys, did anyone encounter some problems when trying to wipe data/do a factory reset using the Cyanogen Recovery? After I updated from CM 12 to CM 12.1 I wanted to do a factory reset. Selecting "Wipe data" got me an error. Upon accessing "logs", I could find that it couldn't mount or find the volume /misc. Oh, and BTW, I can flash CM Updates just fine. I flashed some CM 12.1 compatible Gapps, but they are not working (Google Play Services/Store is not working). That's why I wanted to do a factory reset and then flash Gapps. What can I do now, in order to make it work again?
Click to expand...
Click to collapse
1. First from CM recovery, flash the recovery from HERE
2. Then reboot to recovery
3. Do the factory reset/wipes from the new recovery
4. Flash the new CM12.1 and gapps
The problem is with the new CM recovery, which doesn't work properly with our device. We can only hope the CM devs will sort it out in time
Let me know how you go
noppy22 said:
1. First from CM recovery, flash the recovery from HERE
2. Then reboot to recovery
3. Do the factory reset/wipes from the new recovery
4. Flash the new CM12.1 and gapps
The problem is with the new CM recovery, which doesn't work properly with our device. We can only hope the CM devs will sort it out in time
Let me know how you go
Click to expand...
Click to collapse
Is it possible to flash a new recovery via recovery? Never heard of this before.
bv31top said:
Is it possible to flash a new recovery via recovery? Never heard of this before.
Click to expand...
Click to collapse
You will actually be flashing an incompatible kernel, but because the kernel and recovery reside in the same partition in the S2, you are actually using just the recovery. If you try to reboot into the system, you will end up with a bootloop. So just flash the "kernel", reboot straight back to the new recovery, then flash what you need from this new recovery, then reboot to the new rom
noppy22 said:
You will actually be flashing an incompatible kernel, but because the kernel and recovery reside in the same partition in the S2, you are actually using just the recovery. If you try to reboot into the system, you will end up with a bootloop. So just flash the "kernel", reboot straight back to the new recovery, then flash what you need from this new recovery, then reboot to the new rom
Click to expand...
Click to collapse
Ok, I got it now. Partially. ) So, you're telling me that this "PhilZ recovery" is like a "temporary" one? I use it just to do the factory reset, flash the CM 12.1 and then flash Gapps?
bv31top said:
Ok, I got it now. Partially. ) So, you're telling me that this "PhilZ recovery" is like a "temporary" one? I use it just to do the factory reset, flash the CM 12.1 and then flash Gapps?
Click to expand...
Click to collapse
Yes thats right. Use it as a tool to flash what you need. Once you flash CM12.1 you will overwrite philz with the CM recovery/kernel that is included in the .zip file you flash. Hopefully this won't be needed in the future
noppy22 said:
Yes thats right. Use it as a tool to flash what you need. Once you flash CM12.1 you will overwrite philz with the CM recovery/kernel that is included in the .zip file you flash. Hopefully this won't be needed in the future
Click to expand...
Click to collapse
Ok, I'll try it and let you know how it went.
So, I followed your steps and everything went smooth as butter, but I can't flash the Gapps zip. I tried the recommended zip from CyanogenMod website and it outed this:
set_perm: some changes failed
E: Failed to install /sideload/package.zip" error in recovery.
bv31top said:
So, I followed your steps and everything went smooth as butter, but I can't flash the Gapps zip. I tried the recommended zip from CyanogenMod website and it outed this:
set_perm: some changes failed
E: Failed to install /sideload/package.zip" error in recovery.
Click to expand...
Click to collapse
try a diff gapps pkg like 'Pico gapps' and see
Sun90 said:
try a diff gapps pkg like 'Pico gapps' and see
Click to expand...
Click to collapse
I tried like, 7 Gapps packages (Pico and nano ones) and still, won't work. On some I get the "footer" error, for example. What can I do? Should I use the PhilZ recovery and do a "Full factory reset for flashing a new ROM?
bv31top said:
I tried like, 7 Gapps packages (Pico and nano ones) and still, won't work. On some I get the "footer" error, for example. What can I do? Should I use the PhilZ recovery and do a "Full factory reset for flashing a new ROM?
Click to expand...
Click to collapse
Yes, U can try that and see
noppy22 said:
1. First from CM recovery, flash the recovery from HERE
2. Then reboot to recovery
3. Do the factory reset/wipes from the new recovery
4. Flash the new CM12.1 and gapps
The problem is with the new CM recovery, which doesn't work properly with our device. We can only hope the CM devs will sort it out in time
Let me know how you go
Click to expand...
Click to collapse
Hello
GS2 already installed with cyanogenmod 10 + clockworkmod recovery 6.0.2.9, I wanted to install last cyanogenmod :
- cm-12.1-20150817-NIGHTLY-i9100.zip
- gapps-5.1-arm-2015-07-17-13-29.zip
Starting recovery, wipe data / factory reset , install cm zip, install gapps, reboot. --> getting endless cyanogenmod animated logo, the one which comes at boot.
After poweroff+ boot into recovery again, I was surprised to get the cyanogenmod recovery instead of clockworkmod.
I started a new wipe + cm install, but without gapps + reboot : success !!
After that, trying to install gapps from cyanogedmod recovery failed each time with following message :
finding update package
opening update package
verifying update package
installing update...
installing gapps
set_perm : some changes failed
E: failed to install /sideload/package.zip
E: please take note of all the above lines
installation aborded
was clockworkmod recovery 6.0.2.9 to old to proper install the last cyanogen ?
@sksbir
Yes you need to use a newer recovery. Try flashing one of the newer kernels for this device, reboot back to recovery, then flash rom and gapps
Sent from my GT-I9100 using XDA Free mobile app
noppy22 said:
@sksbir
Yes you need to use a newer recovery. Try flashing one of the newer kernels for this device, reboot back to recovery, then flash rom and gapps
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
Thank's for your quick answer.
So let me resume the situation:
- my clockworkmod was too old, and CM 12 recovery have some problems.
- once CM12.1 is installed, recovery is overwritten with CM recovery.
- so each time you need to do a wipe/factory reset once CM12 is installed, you first have to
> boot to CM recovery
> install a "good" recovery like philz's one to overwrite CM recovery
> reboot again to recovery ( the philz's one )
> install CM12 from recovery
> install Gapps from recovery
> reboot
[Edit] done. Installation is now complete, ( with cm-12.1-20150819-NIGHTLY-i9100.zip and gapps-5.1-arm-2015-07-17-13-29.zip, using "install a new rom" within wipe/factory reset option of Philz recovery ) but I'm not sure it is successfull :
- stuck in startup wizard after signing up with google account. I had to ignore the step to complete the wizard
- no Google Playstore app . Other google applications are here.
I tryed to install the playstore from an apk extracted from my LG G2 ( with same gapps installed ), but once installed, crash immediately at launch.
- no bluetooth : crash the control panel. bug report sent to CM.
Maybe it's because I did not install properly the whole, maybe it's because the firm is still new and it's a nighty, although the same version run well on my LG G2.
If someone have an clue ? I will soon revert to an older CM if there is no issues. Previous installed CM (V10 snapshot, android 4.4 ) ran well.
[edit] : I will first replay the whole installation , but with [GAPPS][2015-04-04] Google Apps Minimal Edition for Android 5.0.x & 5.1.x instead of full Gapps.
I have moto e android 4.4 rooted stocked rom
wiped data, dalvic, and cache before flashing
I tried flashing cm12.1 (latest build) in my moto e using cwm recovery
But it bootloops....
wiped partition too, then again flashed it but it again bootloops..
Any solution ???
What should I do?
use TWRP... :/
booo159159 said:
use TWRP... :/
Click to expand...
Click to collapse
thanks for the reply.
i have already used cwm recovery.
how to use that.. can you explain?
mrravi said:
thanks for the reply.
i have already used cwm recovery.
how to use that.. can you explain?
Click to expand...
Click to collapse
flash twrp and select the appropriate options shown on screen.
Search for TWRP in MOTO E forum download it and flash it on your phone using minimal adb and fastboot.
next time when you'll boot into recovery, it will boot into TWRP (team win recovery project) instead of CWM. follow same steps - wipe EVERYTHING. flash rom, flash gapps and BAM.
booo159159 said:
use TWRP... :/
Click to expand...
Click to collapse
Using twrp 2.8.5.0. But getting same problem in my xt1022 moto e. it stuck on bootloop of cm12.1.. What to do..??
after 2 months??
use latest version of TWRP 2.8.7.0
if it still bootloops you may need to flash cm11 first (can be found in ROMs section) let it boot and when it successfully starts then reboot to recovery and wipe everything and flash latest cm12.1
try It... many users have reported that this solution works for them
Ya...TRy First CM11 then CM12