Related
TIRED OF THE PLAIN MOTOROLA BOOT IMAGE WHEN YOUR PHOTON FIRST POWERS ON? TIRED OF STARING AT THE RED M LOGO WHEN IN FASTBOOT MODE?
WAIT NO MORE!!
I AM STARTING A THREAD FOR BOOT LOGOS FOR THE PHOTON. I WILL BE POSTING LOGOs AS I MAKE THEM. IF YOU HAVE AN IMAGE YOU WOULD LIKE AS A LOGO, PLEASE PM ME OR POST ON HERE AND I WILL CONVERT IT FOR YOU!
I WILL BE KEEPING UP WITH THIS THREAD AS MUCH AS POSSIBLE. I WILL UPDATE REQUESTS AS I GET THEM...OR AT LEAST ONCE A DAY. IF YOU WANT AN IMAGE AND YOU POST IT IN THE THREAD, PLEASE BE RESPECTFUL OF OTHERS. IF ITS AN IMAGE THAT YOU DO NOT WANT REPOSTED FOR OTHERS TO USE, PLEASE PM ME!
LETS DO THIS!
HOW TO
HERE IS THE LINK TO WHERE I GOT ALL MY INFO AND FILES NEEDED TO DO ALL OF THIS. ITS BEEN ALOT OF FUN AND ALOT OF TRIAL AND ERROR!!
BOOT LOGOs FOR THE MOTO ATRIX (exact same process for the Photon)
A FEW THINGS TO REMEMBER / BE AWARE OF:
THIS IS NOT A BOOT ANIMATION - JUST THE IMAGE PRIOR TO THE ANIMATION STARTING.
IF YOU ATTEMPT YOUR OWN AND ITS NOT RIGHT, IT WILL JUST BOOT INTO BINARY TEXT. DONT FREAK OUT!!!
THESE WILL BE FOR COMMAND PROMPT ONLY. ATTACHED IS THE ZIP WITHOUT THE LOGO.BIN FILE. SIMPLY PLACE THE LOGO.BIN IN THE ROOT OF THIS ZIP FILE AND PLACE ON YOUR SDCARD AND BOOT INTO RECOVERY AND USE CWM TO INSTALL! **THANK TO damageplan1223 FOR THE ZIP** (I have not tested this zip to see if it works. I always use cmd)
I WILL GIVE AS CLOSE TO STEP-BY-STEP INSTRUCTIONS AS POSSIBLE ON HOW TO INSTALL THE IMAGE ONCE ITS CONVERTED. SO HERE IS GOES:
UNZIP THE FASTBOOT FILE AND PLACE ON YOUR C DRIVE (OR WHEREVER YOU WANT IT)
IF ITS NOT ALREADY, MAKE SURE THE NAME OF THE FILE IS LOGO.BIN
PLACE THE LOGO.BIN FILE IN YOUR FASTBOOT FOLDER
USING COMMAND PROMPT (OR EMULATOR) CD TO YOUR FASTBOOT FOLDER: (example - cd C:/fastboot)
ONCE IN FASTBOOT DIRECTORY, BOOT INTO FASTBOOT ON YOUR DEVICE AND PLUG INTO TO COMPUTER (vol down and power...once fastboot appears, vol up)
TYPE moto-fastboot flash logo logo.bin (depending on if its home or work computer, I have to leave out the moto-)(It will tell you that the command wont work if you use the moto-fastboot. If it doesn just put fastboot and leave out the moto-)
AT THIS POINT IT SHOULD WRITE THE FILE TO YOUR DEVICE
THEN moto-fastboot reboot (same as other command, may have to leave out moto-)
AT THAT POINT, YOUR DEVICE SHOULD REBOOT AND BAM...NEW LOGO!!!
SO THATS ABOUT IT. JUST EXTRACT THE LOGO.BIN FROM THE DOWNLOAD AND FOLLOW THE ABOVE STEPS!!
GOOD LUCK!!!
Shattered Glass
iPhone Killer
MotoPhone
XDA QR Code - really takes you to xda-developers.com when scanned!
NC TarHeels - For the NC fans out there!
Abstract - Just something a little different
Black and White - MY FAV SO FAR!!
Apple Sniper - THE BEST!!
Here are a few more. Hope you enjoy! These are a little more abstract/nontraditional!!
Superman
Hex
Alien
3D Android
3D Glass
you could try this as a test
if you want to flash a logo thru CWM recovery thiz is my flashable zip file that u can use to as a boot logo or you could extract an change the logo.bin for your own logo. http://dl.dropbox.com/u/20954860/Moto-Boot-logo.zip
damageplan1223 said:
if you want to flash a logo thru CWM recovery thiz is my flashable zip file that u can use to as a boot logo or you could extract an change the logo.bin for your own logo. http://dl.dropbox.com/u/20954860/Moto-Boot-logo.zip
Click to expand...
Click to collapse
Much appreciated!!! If you dont care...Im going to remove the logo.bin and post just the zip in the OP so others can use it if they dont want to use command prompt.
...and I LOVE the Tegra 2 stuff...especially the red one!!
Google evo never forget splash screen. I would LOVE this on the Photon.
Edit
http://forum.xda-developers.com/showthread.php?t=766465
There it is dowant.jpg
Sent from my MB855 using xda premium
[email protected] said:
Google evo never forget splash screen. I would LOVE this on the Photon.
Edit
http://forum.xda-developers.com/showthread.php?t=766465
There it is dowant.jpg
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
If this is what you are talking about...here you go!! If you want me to change the HTC EVO to Motorola Photon or something like that, let me know!
EVO NEVER FORGET
Anyways to just remove the sprint boot up flash sequence?
Nice work
Sent from my MB855 using XDA Premium App
No problem
Sent from my MB855 using XDA Premium App
thanks OP I nostalgia'd so hard when i rebooted my phone.
[email protected] said:
thanks OP I nostalgia'd so hard when i rebooted my phone.
Click to expand...
Click to collapse
Haha...no prob. Glad I could help!!!
Sent from my MB855 using XDA App
Aquos1 said:
Anyways to just remove the sprint boot up flash sequence?
Click to expand...
Click to collapse
Give me some more info about your device:
Rooted?
Unlocked?
ROM?
...will make a difference!
I would like the animation from the droid 3 personally with or without sound
rooted not unlocked
Can i get this please?
here is a link to the picture ...
http://t3.gstatic.com/images?q=tbn:ANd9GcRCZNcvxJzmVZDMxKPnDQWRpmdSI_DcqtjcGdf9JJ7o1jEPR6t7z5XsCg
zikronix said:
I would like the animation from the droid 3 personally with or without sound
rooted not unlocked
Click to expand...
Click to collapse
Unfortunately I dont do much with boot animations...just the boot image that you see right before the boot animation. Here is a link to someone that does the animations and a pretty good directive on how to do it yourself.
You can PM Bandage as well to get it done a little quicker!
iSaint said:
Can i get this please?
here is a link to the picture ...
http://t3.gstatic.com/images?q=tbn:ANd9GcRCZNcvxJzmVZDMxKPnDQWRpmdSI_DcqtjcGdf9JJ7o1jEPR6t7z5XsCg
Click to expand...
Click to collapse
Here ya go. Because the orginal image is so small...I made it as big as I could without alot of distortion. Hope its ok!
Link for download
Thanks so much bro !
Here's the one I just made for myself, based off just the Android logo.
has anyone found the file to replace with a splash screen or have any idea how we can change it?
mattdub1 said:
has anyone found the file to replace with a splash screen or have any idea how we can change it?
Click to expand...
Click to collapse
I'm guessing you mean the boot animation (after the Samsung Galaxy Tab screen)?
system/media/bootanimation.zip
If you're rooted, and have write permissions set, replace the file with another of your choosing.
RGardner said:
I'm guessing you mean the boot animation (after the Samsung Galaxy Tab screen)?
system/media/bootanimation.zip
If you're rooted, and have write permissions set, replace the file with another of your choosing.
Click to expand...
Click to collapse
Believe he's talking about the Samsung splash screen not the boot animation after..I would love to know how...I know on my HTC evo you have to flash .img file in fastboot
ya, not the boot animation, the samsung splash screen
mattdub1 said:
ya, not the boot animation, the samsung splash screen
Click to expand...
Click to collapse
Samsung uses a proprietary .qmg file, but I haven't found where it resides on the Tab. It isn't in System/Media like it was on my old Captivate.
Actually I know how to do this. Samsung uses proprietary formats, but for splash its not qmg. That is for boot animations. I am working on this for everyone. I do not own a Galaxy Tab, but someone has donated a large sum of money and is loaning me a tab to work with so I can perfect a flash able zip for this. It should only take me a couple of weeks, consider it a WIP. I will post the zip or other instructions when I have it done
After I threw up in my mouth a little bit... I realized i don't have an iPhone
I wonder if we can use this and tweak it to work for the tab
http://forum.xda-developers.com/showthread.php?p=32581589
benny3 said:
I wonder if we can use this and tweak it to work for the tab
http://forum.xda-developers.com/showthread.php?p=32581589
Click to expand...
Click to collapse
Depends... Does the galaxy tab have a S4 processor? When I get the test tablet I will have to examine the kernel to see where the splash screen is stored. If it is in the same place all it will take to get that script to work is a few minor script modifications because that particular one uses a assert get prop to make sure its d2vzw or another compatible device. (ie d2spr, d2att, d2tmo). I will post my results when I have it all done. I know its possible, but I could also make a flashable zip with a script that points to another location for the splash screen so you could load it in system/media with the boot animation and change it at will very easily like you can a boot animation. More information to follow. Please be patient
After I threw up in my mouth a little bit... I realized i don't have an iPhone
Any updates on how you're going with this? Keen to give it a try...
For some reason, when I load AOKP from moboot, I get two splash screens, one with the unicorn, and then the wide lime green cyanogenmod splash screen with the play triangle. This is before the boot animation. In my /boot, the only splash file I have is moboot.splash.AOKP.tga. Would anyone have any explanation on why this would be? Is the splash built into the rom? Are others able to reproduce?
Its because you had CM9 on your TouchPad before. Theres files left over from in. The files are in the boot folder on the root of your device. I'm not sure the name of the image but you can delete the cyanogenmod one. Along with the file that displays the cyanogenmod option on the moboot screen if you havent already. Someone else will have to jump in and tell you the exact file names to delete.
chmcarro said:
For some reason, when I load AOKP from moboot, I get two splash screens, one with the unicorn, and then the wide lime green cyanogenmod splash screen with the play triangle. This is before the boot animation. In my /boot, the only splash file I have is moboot.splash.AOKP.tga. Would anyone have any explanation on why this would be? Is the splash built into the rom? Are others able to reproduce?
Click to expand...
Click to collapse
My understanding is that there may be a 2nd splash screen built into the rom, according to other reports online. Anyone have any insight on this?
jsgraphicart said:
Its because you had CM9 on your TouchPad before. Theres files left over from in. The files are in the boot folder on the root of your device. I'm not sure the name of the image but you can delete the cyanogenmod one. Along with the file that displays the cyanogenmod option on the moboot screen if you havent already. Someone else will have to jump in and tell you the exact file names to delete.
Click to expand...
Click to collapse
In my boot folder, there are no files that mention CM or CyanogenMod. There is only one splash file. It is named moboot.splash.AOKP.tga. The 2nd splash loading screen must be called elsewhere. It is also seen when launching TWRP from moboot.
I've got the same thing. I haven't looked to closely, but I seem to recall seeing three .tga files in there.
Sent from my aokp_tenderloin using Tapatalk 2
hummer010 said:
I've got the same thing. I haven't looked to closely, but I seem to recall seeing three .tga files in there.
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
I believe the loading splash is independent of the .tga files. I have removed them and still get the "Cyanogenmod loading..." splash. This must be built into the rom somewhere.
I read somewhere else that if you take the rom zip and extract it, there is an image on the root of the folder that is the splash screen. Thats probably it. I havent extracted a rom to see for myself.
jsgraphicart said:
I read somewhere else that if you take the rom zip and extract it, there is an image on the root of the folder that is the splash screen. Thats probably it. I havent extracted a rom to see for myself.
Click to expand...
Click to collapse
You are right, there is a moboot.splash.AOKP.tga file in the root of the extracted rom. I replaced my .tga with this one. It shows this file, the unicorn, but it then it shows the green "cyanogenmod loading..."
It should be noted that the TWRP also shows the "cyanogenmod loading..." when selected from moboot. I'm still thinking the loading splash is independent of the .tga file. Let me know your thoughts.
chmcarro said:
You are right, there is a moboot.splash.AOKP.tga file in the root of the extracted rom. I replaced my .tga with this one. It shows this file, the unicorn, but it then it shows the green "cyanogenmod loading..."
It should be noted that the TWRP also shows the "cyanogenmod loading..." when selected from moboot. I'm still thinking the loading splash is independent of the .tga file. Let me know your thoughts.
Click to expand...
Click to collapse
What file do you mean for the "rom"? The original .zip that is flashed?
Yes, i unziped the .zip and there is a .tpk in the root dir. There is still another loading image elsewhere. Does anyone not have the "cyanogen(mod) loading..." on their touchpad boot?
Sent from my SPH-L710 using xda app-developers app
chmcarro said:
Yes, i unziped the .zip and there is a .tpk in the root dir. There is still another loading image elsewhere. Does anyone not have the "cyanogen(mod) loading..." on their touchpad boot?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
If it is an issue to have two splash screens, in the future I could just include the CyanogenMod .tga splash, and you would only see that. But, I do not really understand why it is an issue?
-SGA- said:
If it is an issue to have two splash screens, in the future I could just include the CyanogenMod .tga splash, and you would only see that. But, I do not really understand why it is an issue?
Click to expand...
Click to collapse
Thanks, I don't think it is an issue with your rom in particular. I would like to have a custom loading screen for what appears after the .tga splash. I'm referring to the "Cyanogen(mod) loading..." image. Do you know how this is generated?
this might be a dumb question, but do the splash screens increase the time it takes to boot?
chmcarro said:
Thanks, I don't think it is an issue with your rom in particular. I would like to have a custom loading screen for what appears after the .tga splash. I'm referring to the "Cyanogen(mod) loading..." image. Do you know how this is generated?
Click to expand...
Click to collapse
I think the screen you're talking about is baked into the kernel. Not sure though.
Posted by Mr. Z's Galaxy S3.
Same here..but not a bit of an issue.
Theme feels incomplete with these leftovers.
-SGA- said:
If it is an issue to have two splash screens, in the future I could just include the CyanogenMod .tga splash, and you would only see that. But, I do not really understand why it is an issue?
Click to expand...
Click to collapse
I don't think OP has an issue as much as would like to complete a theme for his Touchpad.
I'm also interested in the source of these screens as I've reworked my MOBoot splash, re-rolled my CM9 boot animation, updated the boot .tga files (landscape)... leaving these HP pulsing logo (portrait) and the CyanogenMod loading...(portrait) not to be found.
I'll be looking into the ROM .zip to check deeper.
Mine is the same. It shows the AOKP unicorn first, and then the cyanogen(mod) loading one second, and then switches to the boot animation from the actual rom.
It's not a problem, although it would be nice to figure out where it comes from so it could be customized.
It certainly doesn't effect the use of the touchpad at all.
[BOOT LOGO + ANIMATION] Moto Logos (Multi-Color, Blur, & MOTOX) - Updated 10/12/13
Just sharing some work I did on aligning some boot logos and animations using OEM Moto logos. All of these were converted from animations originaly from Motorola.
These are CWM flashable, and they change the Boot Logo and the Boot Annimation so that they flow into one another.
These are designed to work with GB ROM's, I have only tested them with NottachTrix and CSROM. If you want to use them with other ROM's then extract the bootanimation.zip file from within these and copy it over tot he right /system folder
!! NEW !! Moto X Boot Animation (revolving world scape ... kind of thing). I had to mod the animation due to our Atrix's capability, but ti still looks pretty cool
Link: http://www.mediafire.com/?gt5oy7yi0pf0431
Grey Version of the OEM Logo
Link: http://www.mediafire.com/?u90939pr9jy6g2n
Blue OEM Logo
Link: http://www.mediafire.com/?6vbga4dtr7u8gr6
Red Version of the OEM Logo
Link: http://www.mediafire.com/?9t9deo3gvxofxs9
Embers Version of the OEM Logo (sorry for the small size on this one, orignal source was small to begin with)
http://www.mediafire.com/?imy2sryeymkdci6
Violet Version of the OEM Logo (sorry for the small size on this one, orignal source was small to begin with)
http://www.mediafire.com/?6lky4bjali4dkgt
Pink Version of the OEM Logo
http://www.mediafire.com/?c4x47oyjjxqz2jf
Blur Version of the Logo form the Defy
Link: http://www.mediafire.com/?3jmbgweuv5160u5
To install:
1.) boot to recovery
2.) install from zip
3.) reboot
Thanks to thewarhawk for his guide on how to do all this (http://forum.xda-developers.com/showthread.php?t=1187337&highlight=boot)
These are all great. Thanks again for sharing!
(Unfortunately, I used up my "THANKS" for today. I'll be back tomorrow.)
bernardwilkes3 said:
Just sharing some work I did on aligning some boot logos and animations using OEM Moto logos.
Click to expand...
Click to collapse
Thanks so much, they work fine.
Regards
Really like the blue logo but the "Blur" bit kills it.
nh777 said:
Really like the blue logo but the "Blur" bit kills it.
Click to expand...
Click to collapse
Yea I agree, but that was in the OEM animation. I was thinking of shortening the animation and trying to eliminate the Blur word, but that is a ton of editing of a lot of individual files.
bernardwilkes3 said:
Yea I agree, but that was in the OEM animation. I was thinking of shortening the animation and trying to eliminate the Blur word, but that is a ton of editing of a lot of individual files.
Click to expand...
Click to collapse
Sorry to hear that. It'd be great to have a version in line with the red and grey.
For what it's worth, I'm on grey now and really dig it. If you manage to find a way to load the blue (or find it elsewhere), post it on here.
bernardwilkes3 said:
Yea I agree, but that was in the OEM animation. I was thinking of shortening the animation and trying to eliminate the Blur word, but that is a ton of editing of a lot of individual files.
Click to expand...
Click to collapse
I can help you editing the images
Regards
gustrick said:
I can help you editing the images
Regards
Click to expand...
Click to collapse
Ok I'll PM you a link with the images and you can have at it ....
I am working on a new Moto Animation based on a clip I found of the logo, it is a nice blue and I think it is just what a few of you (and me) are looking for .... almost done with it and hope to post it later tonight.
New BLUE OEM Logo and Animation Posted
Awesome, awesome, awesome work!
Problem Flashing
I have problem when flashing this .zip file with CWM 5.8 and it said "installation aborted" "Status 7"
femtofecmi said:
I have problem when flashing this .zip file with CWM 5.8 and it said "installation aborted" "Status 7"
Click to expand...
Click to collapse
Which one did you download? Were you able to flash any of them or is it a specific problem with just one of them?
They only works in a blur rom
I try it in CM7 and shows the same error
Saludos
gustrick said:
They only works in a blur rom
I try it in CM7 and shows the same error
Saludos
Click to expand...
Click to collapse
Yep, I built them for NottachTrix4G and CSROM (should work with other Blur based ROMs). However, they could be converted to work with CM7 if you wanted to.
bernardwilkes3 said:
Yep, I built them for NottachTrix4G and CSROM (should work with other Blur based ROMs). However, they could be converted to work with CM7 if you wanted to.
Click to expand...
Click to collapse
I want them but just the animation. I dont want to replace the boot logo
femtofecmi said:
I want them but just the animation. I dont want to replace the boot logo
Click to expand...
Click to collapse
Can't you just extract bootanimation.zip and copy it to your phone?
How to update
bernardwilkes3 said:
Just sharing some work I did on aligning some boot logos and animations using OEM Moto logos.
These are CWM flashable, and they change the Boot Logo and the Boot Annimation so that they flow into one another.
These are designed to work with GB ROM's, I have only tested them with upndwn4par's CSROM and NottachTrix.
Grey Version of the OEM Logo
Link: http://www.mediafire.com/?u90939pr9jy6g2n
!! NEW !! Blue OEM Logo
Link: http://www.mediafire.com/?6vbga4dtr7u8gr6
Red Version of the OEM Logo
Link: http://www.mediafire.com/?9t9deo3gvxofxs9
Blur Version of the Logo form the Defy
Link: http://www.mediafire.com/?3jmbgweuv5160u5
To install:
1.) boot to recovery
2.) install from zip
3.) reboot
Thanks to thewarhawk for his guide on how to do all this (http://forum.xda-developers.com/showthread.php?t=1187337&highlight=boot)
Click to expand...
Click to collapse
Can u help with steps and procedure to change the boot logo animation. I have downloaded it.
ravilov said:
Can't you just extract bootanimation.zip and copy it to your phone?
Click to expand...
Click to collapse
i replaced bootanimation.zip in /system/media and set permission by es file explorer but it didn't work. black screen appear in stead of the animation
vigremrajesh said:
Can u help with steps and procedure to change the boot logo animation. I have downloaded it.
Click to expand...
Click to collapse
You flash it through recovery like any other flashable ZIP.
femtofecmi said:
i replaced bootanimation.zip in /system/media and set permission by es file explorer but it didn't work. black screen appear in stead of the animation
Click to expand...
Click to collapse
Try putting it in /data/local/bootanimation.zip.
Although, putting it in /system/media should work too, dunno why it doesn't. Are you sure you did it right?
femtofecmi said:
i replaced bootanimation.zip in /system/media and set permission by es file explorer but it didn't work. black screen appear in stead of the animation
Click to expand...
Click to collapse
The fact that you get a blackscreen tells me that you put the file in the right place. That leads me to believe there is something wrong with the bootanimation.zip file you are using.
Did you by chance unzip the bootanimation.zip file itself? And then rezip it before moving it to the Atrix? If so, did you happen to rezip the bootanimation file normaly? I ask because I did that a one point and caused the very same issue.
A bootanimation.zip must be made without compression, or set as "store" not "archive" when Zip'ing. If you answered yes to all of this then the solution is to get a bootanmiation.zip that is compressed correctly and move that to your /system/media. You can do that one of two ways,
1.) redownload my files, unzip the flashable file to get the bootanimation, but do NOT unzip the bootanimation file itself. Copy that bootanimation to your phone
or
2.) rezip the bootanimation file without compression, in 7zip you do this by setting the the pression to "store"
quick how to -->use splashflasher1.0 to convert 1080x1920 image then flash it with fastboot flash splash1 custom.img while in bootloader
you will need the eng hboot found here
1. Find your image and resize it to 1080 (width) by 1920 (length). (gimp is a good free tool for this)
2. Download splash flasher from here (and give the guy a thanks)
3. Follow the instructions by placing your newly created image in the folder then running the tool (note: make a copy of the image and put it in the folder as the process deletes the original)
4. Place the newly created custom.img in your working adb dir.
5. reboot to bootloader and send the command fastboot flash splash1 custom.img
i've attached the first one that i made. Make your own and share...
Edit: Check out the regawmod thread to remove the red disclaimer at the bottom or get get one that is already done here
note: if i've stepped on anyone's toes please let me know and i'll remove my post
[Splash]Red HTC Quietly Rooted
Cool. I just made a red HTC quietly rooted splash with this tool in a couple minutes.
Re: [How to] make your own splash screen for the DNA
What happened to the old school splash screen flash where u name it PL83200 and put it on the root if your sd card boot bootloader and press up on the volume rocker.
Sent from ny ViperDNA
Thanks! I'll use this to make some for the one xl
Re: [How to] make your own splash screen for the DNA
jonah1234 said:
What happened to the old school splash screen flash where u name it PL83200 and put it on the root if your sd card boot bootloader and press up on the volume rocker.
Sent from ny ViperDNA
Click to expand...
Click to collapse
Doesn't work that way with us because there is no sdcard to search. I've been emailing back n forth with the developer who made the flash image gui app to see if splash.img can be included in flashing with his app. Hopefully he does that for us...
Sent from my HTC6435LVW using Xparent Cyan Tapatalk 2
Re: [How to] make your own splash screen for the DNA
Stoney 666 said:
Doesn't work that way with us because there is no sdcard to search. I've been emailing back n forth with the developer who made the flash image gui app to see if splash.img can be included in flashing with his app. Hopefully he does that for us...
Sent from my HTC6435LVW using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
Right right forgot about that. Silly HTC
Sent from ny ViperDNA
Some people like to add their name and phone number to the splash, then if someone takes it they can't figure out how to remove it. Here are some basic minimalistic jpg's that you can add text to before you convert it. I've also converted them if no text is wanted...
if you are using the custom.img don't forget to rename it to custom.img or adjust your adb command.
edit: i fixed the android circuit, sorry about the mixup
...a few more...
... a few more...
jonno95 said:
... a few more...
Click to expand...
Click to collapse
Would you mind making me an all black splash? :good::laugh:
Credit for design goes to yousefak, I just edited size and added text.
Argumentation said:
Would you mind making me an all black splash? :good::laugh:
Click to expand...
Click to collapse
here is all black
Re: [How to] make your own splash screen for the DNA
Some of these make great wallpapers as well
Sent from my HTC6435LVW using xda app-developers app
will be posting more, started converting live wallpapers I have made into these.
call this the urban garden
jonno95 said:
Some people like to add their name and phone number to the splash, then if someone takes it they can't figure out how to remove it. Here are some basic minimalistic jpg's that you can add text to before you convert it. I've also converted them if no text is wanted...
if you are using the custom.img don't forget to rename it to custom.img or adjust your adb command.
Click to expand...
Click to collapse
the android curciut img downloaded but shown as captain amerika
minjiet said:
the android curciut img downloaded but shown as captain amerika
Click to expand...
Click to collapse
I fixed it. Thanks for letting me know.
Stoney 666 said:
Doesn't work that way with us because there is no sdcard to search. I've been emailing back n forth with the developer who made the flash image gui app to see if splash.img can be included in flashing with his app. Hopefully he does that for us...
Sent from my HTC6435LVW using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
that would be way cool if we could do it through the flash image gui. i'd probably pay for the market app then.
Well that takes care of that.. I was just working to figure out how this was done. Thanks OP for letting the cat out of the bag..
I thought I'd contribute as well... just finished making this one up.