Related
Gave my Evo 3d to my borother a few months back, but hes come back to me today saying it was stuck in bootloop.
He booted into the bootloader and did a factory reset, but it was still stuck in bootloop.
I tried to get into recovery to flash a new rom, but when i select recovery from the bootloader, that also goes into a bootloop.
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Not sure if its important but the phone is s-off. Any ideas on whats going on or how to fix?
Apologies, supposed to put this in Q&A forum
While you're at bootloader, connect USB and then flash a stock RUU.
androidcdma said:
While you're at bootloader, connect USB and then flash a stock RUU.
Click to expand...
Click to collapse
Thanks for the reply. Will i lose s-off with this?
Tones1971 said:
Gave my Evo 3d to my borother a few months back, but hes come back to me today saying it was stuck in bootloop.
He booted into the bootloader and did a factory reset, but it was still stuck in bootloop.
I tried to get into recovery to flash a new rom, but when i select recovery from the bootloader, that also goes into a bootloop.
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Not sure if its important but the phone is s-off. Any ideas on whats going on or how to fix?
Apologies, supposed to put this in Q&A forum
Click to expand...
Click to collapse
You didn't say what version of the Evo 3D you have (CDMA or GSM) or what bootloader is installed, but if it's a Sprint CDMA model I would recommend flashing the Sprint ICS RUU.exe from Windows after putting the phone into fastboot mode in the bootloader. You may have to relock the bootloader with the "fastboot oem lock" command first if it shows "***UNLOCKED***" at the top of the screen.
That will fix a lot of problems, especially when the phone is in an indeterminate state. After flashing the RUU you can HTC unlock, flash a custom recovery and then root the stock ROM or flash a rooted ROM.
ramjet73
Sorry it is a UK GSM (Europe). I have revolutionary bootloader installed. Got an RUU to try now thanks.
androidcdma said:
While you're at bootloader, connect USB and then flash a stock RUU.
Click to expand...
Click to collapse
Tones1971 said:
Thanks for the reply. Will i lose s-off with this?
Click to expand...
Click to collapse
^^^^ He got it first with the short version.
No, you won't lose S-OFF and won't need to relock the bootloader first if that's your current status.
And if it's a GSM model everything still applies, you just need a different RUU, which you already have.
ramjet73
Thanks ramjet. Thought this was going to be straightforward but cant get ruu to install. Error 170. Ill keep plugging away / googling away, hopefully come up with something
Tones1971 said:
Thanks ramjet. Thought this was going to be straightforward but cant get ruu to install. Error 170. Ill keep plugging away / googling away, hopefully come up with something
Click to expand...
Click to collapse
Error 170 means that the RUU utility can't find the phone. There's a readme.doc for running the RUU here, and the error codes are towards the end of that.
Are you putting it into "fastboot" mode in the bootloader, which should change to "fastboot usb" when it is connected to a computer? You also need to have the HTC USB drivers active, which can be accomplished by installing HTC Sync.
ramjet73
Tones1971 said:
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Click to expand...
Click to collapse
adb push into a bootlooping phone?
do you have the drivers for the phone? (if not download and install HTC Sync as they come with it)
did you try flashing a custom recovery img through fastboot? (go to bootloader select fastboot, connect USB, type "fastboot flash recovery nameOfYourRecoveryImg.img")
Yeah have tried installing custom recovery through fast boot again, and im in fastboot ok when trying to run the RUU. Also have HTC Sync installed from when i had the phone.. Drivers seemed to be ok as i was able to install the custom recovery with adb, alhough i still got bootloop after that.
Ive a few other things to try when i get home from work. Im sure it shouldnt be too difficult to resolve. Hopefully anyway.
Well this isnt going smoothly at all. Used another PC and was able to get the RUU to run.
However it now comes up with Error 131 Customer ID problem. The RUU was for HTC Europe (non branded). The phone was sim free. When i posted months back my cid was HTC_001. I checked it here: http://forum.xda-developers.com/showpost.php?p=22394863&postcount=172
However now when i get my CID it is showing as CID0202. Any way i can get an RUU to install? Any idea how a CID could change?
EDIT: noticed i used a different command last time.
fastboot getvar cid shows CID0202
adb shell getprop ro.cid now shows device not found (previously showed CID_001)
Thats typing both commands in same window, one after the other. One gets CID0202, the other device not found???
There's a change cid command in fastboot, fastboot oem writecid or something along those lines... however i believe the cid check is in the updater scripts of the ruu in which case a fastboot flash of all the img files should avoid it entirely... i don't remember the procedure for extracting the img files from the ruu but i believe ur supposed to run it and then dig through your temp files...
dessolator666 said:
There's a change cid command in fastboot, fastboot oem writecid or something along those lines... however i believe the cid check is in the updater scripts of the ruu in which case a fastboot flash of all the img files should avoid it entirely... i don't remember the procedure for extracting the img files from the ruu but i believe ur supposed to run it and then dig through your temp files...
Click to expand...
Click to collapse
Thanks for this. Ill see if i can find anything else out about it. So saves running the RUU exe and no cid check done then?
Need to bump this as im not getting anywhere. No RUU's will install, error 31 customer error. Have flashed recovery via ADB and through PG86IMG.ZIP, but still cant get in to recovery as it just continually reboots.
S-OFF with revolutionary. Anybody any ideas please?
Got bigger problems than i thought. Finally got an RUU to install after 4 days of trying, by first using fastboot oem writecid 11111111. But when the phone rebooted it was back bootlooping again. Is there any hope for my phone?
Tones1971 said:
Got bigger problems than i thought. Finally got an RUU to install after 4 days of trying, by first using fastboot oem writecid 11111111. But when the phone rebooted it was back bootlooping again. Is there any hope for my phone?
Click to expand...
Click to collapse
You need to stop cross posting in the d3rp Q&A thread and your own thread if you want more help. Cross-posting is stongly discouraged on XDA and it's really confusing when you are asking for help in one thread while getting different advice in another.
It sounds to me like all the CID changes on your phone have left it in an indeterminate state and I'm not sure at this point what is the correct CID and RUU for your model. If you could detemine that, set the CID correctly and flash the right RUU the phone should work, but it might be too late if you have in fact been flashing firmware that doesn't match your phone because the right RUU may not back that out properly.
That's all I can offer at this point, but since I don't know the history of your phone and how it got the various CID's you have reported, you will probably be the one that needs to figure it out.
ramjet73
Hi, everyone. I hope someone can answer my questions or point me to the thread with the answer to it. Below is the information for my Spint Evo 3D running stock ROM:
Shooter XC Ship S-off RL
HBoot 1.40.1100
Android 2.3.4
HTC Sense 3.0
Software: Shooter_S_Sprint_WWE_2.17.651.5_odex
The last time I did an update of my phone after rooting was early this year. Basically I installed a zipfile provided by a user on this forum (apologize to that user for not being able to credit him) that allows me to get the OTA update on my rooted phone. Now that Sprint released the Ice Cream Sandwich update for EVO 3D, I am looking to upgrade the software again. The main question is...was there a thread for this topic where someone has provided a zipfile to allow updates to ICS for a rooted phone (stock rom)? Would someone please point me to it if they found it (sorry, did not see it)? Second, is the update process the same as before? Do I wipe cache and/or dalvik cache and then just install from zipfile? Any help is appreciated. Just didn't want to brick my phone. Normally I let my sister test things out on her device before I do the same thing but last year she decided to go with Motorola Photon while I sticked with HTC. Help? Thanks.
Tommy
xionchen4628 said:
Hi, everyone. I hope someone can answer my questions or point me to the thread with the answer to it. Below is the information for my Spint Evo 3D running stock ROM:
Shooter XC Ship S-off RL
HBoot 1.40.1100
Android 2.3.4
HTC Sense 3.0
Software: Shooter_S_Sprint_WWE_2.17.651.5_odex
The last time I did an update of my phone after rooting was early this year. Basically I installed a zipfile provided by a user on this forum (apologize to that user for not being able to credit him) that allows me to get the OTA update on my rooted phone. Now that Sprint released the Ice Cream Sandwich update for EVO 3D, I am looking to upgrade the software again. The main question is...was there a thread for this topic where someone has provided a zipfile to allow updates to ICS for a rooted phone (stock rom)? Would someone please point me to it if they found it (sorry, did not see it)? Second, is the update process the same as before? Do I wipe cache and/or dalvik cache and then just install from zipfile? Any help is appreciated. Just didn't want to brick my phone. Normally I let my sister test things out on her device before I do the same thing but last year she decided to go with Motorola Photon while I sticked with HTC. Help? Thanks.
Tommy
Click to expand...
Click to collapse
That's simple mate, but you will lose, recovery and root, I can help get them back, but first you will need to flash this http://cmw.22aaf3.com/shooter/radio/1.09.00.0706/PG86IMG.zip by placing on your sd card root directory and booting into bootloader and then following on screen instructions
gav-collins1983 said:
That's simple mate, but you will lose, recovery and root, I can help get them back, but first you will need to flash this http://cmw.22aaf3.com/shooter/radio/1.09.00.0706/PG86IMG.zip by placing on your sd card root directory and booting into bootloader and then following on screen instructions
Click to expand...
Click to collapse
Hi. Thanks for replying. Please bear with me as I am more of a casual user who barely have any inkling of why he is doing something, only how to get to S-Off, rooted through developers who provided step-by-step guide for "Dummies who want to Root their Phone". I have been in contact with Ramjet73 who is really kind to answer my questions but I am trying not to bother him too much hence I am trying to pass on any further questions that I have to other users such as yourself. So...thank you in advance.
From what Ramjet73 told me, I can just run the RUU.exe for 2.89.651.2 (Sprint ICS build) since I am S-Off. However he then inform me that I need to download a custom bootloader and custom recovery. This supports your comments that I will lose recovery and root after update? Ramjet 73 suggested a custom bootloader from ENG or JBear. How is that different from the bootloader that you suggested in your reply?
I assume that after I update both the ICS RUU and the custom bootloader, I will remain S-Off and rooted with superuser status and apps such as titanium backup and wifi tethering operational?
As for custom recovery, Ramjet 73 suggested 4Ext Recovery which I assume is 4Ext Recovery Updater (if I want a free version) or 4Ext Recovery Control if I am willing to pay for more options. Now in the past, I haven't really install any custom recovery other than what was installed when I used Revolutionary's tool to turn my phone to S-Off. I believe that installed Clockworkmod which I access when I boot to it using Power+Vol Down. Is Rom Manager the newest equivalent to that? What is your opinion on 4Ext Recovery vs Rom Manager.
So to summarize, I run the RUU.exe for ICS upgrade. Then I flash a bootloader like you recommended in your reply or one of the custom bootloaders from ENG or JBear. Then flash a custom recovery and I am all set? Sorry for all these questions and I hope you can help. Thanks.
I'm looking for a cut and dry answer to this as well. I'll be monitoring this and if I see or figure out anything first ill post here.
Sent from my EVO using xda premium
sullivan7221 said:
I'm looking for a cut and dry answer to this as well. I'll be monitoring this and if I see or figure out anything first ill post here.
Click to expand...
Click to collapse
I thought I made it as "cut and dry" as possible:
1. Flash the 2.89.651.2 RUU (.exe from Windows or .zip from the bootloader if you prefer that)
2. Flash the JBear Sprint ICS (1.58.5858) bootloader so you can use fastboot commands
3. Flash 4EXT recovery using the "fastboot flash recovery recovery.img" command
4. Flash the superuser.zip of your choice or a custom rooted rom from 4EXT
I have more detailed instructions in my guide and a single download with the software you need for each of these steps.
Is there something that you don't understand about these steps, or are you just waiting for someone else to confirm that they work?
Edit: If you are looking for another way to do it you can follow the steps in this post, but you will wind up with the stock 1.58 bootloader and won't be able to run most fastboot commands unless you flash a custom bootloader. It takes about as long to flash the firmware, superwipe and ROM in that post and still flash a custom bootloader as it does to perform the above 4 steps, which I believe give you a cleaner ICS base, but it's up to you. That option will save you from having to reflash recovery.
ramjet73
Hi, sorry if I sound like I am doubting you. Your method are pretty simple. Being a relative newbie who rarely tinker with his phone, I am being extra careful to make sure I understand everything before doing something. In any case, I am going to just do it following your procedure. Just downloaded the QADERSO.zip from your guide. I will follow the 4 steps below. If I encounter any problems, then I hope you or other knowledgeable members of the forum can help out. If everything works out great, I will also post to this thread. Thanks.
ramjet73 said:
I thought I made it as "cut and dry" as possible:
1. Flash the 2.89.651.2 RUU (.exe from Windows or .zip from the bootloader if you prefer that)
2. Flash the JBear Sprint ICS (1.58.5858) bootloader so you can use fastboot commands
3. Flash 4EXT recovery using the "fastboot flash recovery recovery.img" command
4. Flash the superuser.zip of your choice or a custom rooted rom from 4EXT
I have more detailed instructions in my guide and a single download with the software you need for each of these steps.
Is there something that you don't understand about these steps, or are you just waiting for someone else to confirm that they work?
Edit: If you are looking for another way to do it you can follow the steps in this post, but you will wind up with the stock 1.58 bootloader and won't be able to run most fastboot commands unless you flash a custom bootloader. It takes about as long to flash the firmware, superwipe and ROM in that post and still flash a custom bootloader as it does to perform the above 4 steps, which I believe give you a cleaner ICS base, but it's up to you. That option will save you from having to reflash recovery.
ramjet73
Click to expand...
Click to collapse
xionchen4628 said:
Hi, sorry if I sound like I am doubting you. Your method are pretty simple. Being a relative newbie who rarely tinker with his phone, I am being extra careful to make sure I understand everything before doing something. In any case, I am going to just do it following your procedure. Just downloaded the QADERSO.zip from your guide. I will follow the 4 steps below. If I encounter any problems, then I hope you or other knowledgeable members of the forum can help out. If everything works out great, I will also post to this thread. Thanks.
Click to expand...
Click to collapse
No problem.
I was actually responding to sullivan7221 because I thought all his questions were answered in my guide thread and then I saw his post in this thread that seems to be asking the same things. It's no problem if he wants consensus from more people, but I did take exception to his reference to a "cut and dry answer". I know that Samsung and other brands have simpler "one click" processes for rooting because I've used them myself, but I've tried to refine and simplify the root and S-OFF process for the Evo 3D as much as possible, and I tested a "one click" root utility that popped up in this forum a few weeks ago and it didn't work.
I understand that you and sullivan7221 aren't looking for root and S-OFF since you both have that already, but it's still important to use a reliable and consistent method for upgrading to the offical Sprint ICS build, which may not be the easiest.
Good luck with your upgrade!
ramjet73
Well...HELP! I successfully update my phone to ICS (not so hard). Then I hit the wall called "Step 2" and promptly bounced right off on my ass. The first thing I try to do was flash the jb_boot.img through fastboot cmd. I put my phone (which is still S-Off like you said, H-Boot 1.58 with "Locked" all the way up top) into Fastboot then connected my phone to usb, resulting in Fastboot USB. Then I use the command "Fastboot flash boot jb_boot.img". Then the problem happened. It said:
writing 'boot'
failed (remote: not allowed)
From discussions online, I also checked to see if it sees my device using 'fastboot devices" and it seems to recognize it: "HT179..."
How do I unlock my bootloader? What did I do wrong? I have the jb_boot.img and jb_boot.zip from your file and the pg86img.zip that was recommended by the poster above containing a radio.img. Any other way to flash it?
Help?
ramjet73 said:
No problem.
I was actually responding to sullivan7221 because I thought all his questions were answered in my guide thread and then I saw his post in this thread that seems to be asking the same things. It's no problem if he wants consensus from more people, but I did take exception to his reference to a "cut and dry answer". I know that Samsung and other brands have simpler "one click" processes for rooting because I've used them myself, but I've tried to refine and simplify the root and S-OFF process for the Evo 3D as much as possible, and I tested a "one click" root utility that popped up in this forum a few weeks ago and it didn't work.
I understand that you and sullivan7221 aren't looking for root and S-OFF since you both have that already, but it's still important to use a reliable and consistent method for upgrading to the offical Sprint ICS build, which may not be the easiest.
Good luck with your upgrade!
ramjet73
Click to expand...
Click to collapse
Well...color me stupid (and an ass) for not reading in depth ramjet's guide. From ramjet's guide, I went to mpgrimm2's "Evo3d(CDMA)HBoot/S-off Differences & Rooting Background Info 9-25-12" thread which eventually lead to ramjet's post with all the different bootloaders available. As suggested, I used JB's ICS bootloader and now in the bootloader page, it no longer say "locked" but "JuopunutBear" now. Onto flashing recovery.
xionchen4628 said:
Well...HELP! I successfully update my phone to ICS (not so hard). Then I hit the wall called "Step 2" and promptly bounced right off on my ass. The first thing I try to do was flash the jb_boot.img through fastboot cmd. I put my phone (which is still S-Off like you said, H-Boot 1.58 with "Locked" all the way up top) into Fastboot then connected my phone to usb, resulting in Fastboot USB. Then I use the command "Fastboot flash boot jb_boot.img". Then the problem happened. It said:
writing 'boot'
failed (remote: not allowed)
From discussions online, I also checked to see if it sees my device using 'fastboot devices" and it seems to recognize it: "HT179..."
How do I unlock my bootloader? What did I do wrong? I have the jb_boot.img and jb_boot.zip from your file and the pg86img.zip that was recommended by the poster above containing a radio.img. Any other way to flash it?
Help?
Click to expand...
Click to collapse
Okay, final update for those looking at this thread. I now have stock ICS, remained S-OFF and have superuser access. Basically I followed ramjet who was helping me out. The first thing that someone in my same position who wants to do the same thing, should navigate to ramjet's guide: (http://forum.xda-developers.com/showthread.php?t=1889438). Download his file (QADERSO.zip) and unzip it.
1) I turned on USB debugging on my phone and connected to my pc using "charge only" option.
2) I clicked on RUU.exe file in ramjet's QADERSO\RUU folder which then update my phone to ICS. When I access the bootloader, it now said "Locked", then "shooter xc ship s-off RL" and finally "Hboot1-58.5858". So now i have ICS, still S-off but with an upgraded locked bootloader.
3) Then I copied the custom bootloader "PG86IMG_jb_hboot_Sprint_ICS.zip into the root directory of my sd card (the zip file can be found in another of ramjet's post (http://forum.xda-developers.com/showpost.php?p=30014044&postcount=7) and renamed it PG86IMG.zip. Once you go into the bootloader, the zip file will automatically update. Now instead of "Locked" on the top, you should have "JuopunutBear".
4) First remove the previous zip file from the directory. I put the "SuperSU-v0.96.zip" from the QADERSO\Root folder in the root director of my sd card again. then i access my bootloader once again.
5) I went into fastboot and then connect to my Pc with usb. It should now say "Fastboot USB".
6) you can now flash any recovery img that you want. This is where I differ from ramjet's suggestion of 4ext as I did a backup of my system before all of this with clockworkmod recovery.
7) once the recovery of your choice is installed, then just install the supersu.zip file from your sd card and you should have a rooted phone.
Thanks to ramjet for his guide and his help. Now onto my next problem. going back to the state I was before updating to ics. Posting another thread about it. Anyone who can help out, please do. Thanks.
xionchen4628 said:
Well...color me stupid (and an ass) for not reading in depth ramjet's guide. From ramjet's guide, I went to mpgrimm2's "Evo3d(CDMA)HBoot/S-off Differences & Rooting Background Info 9-25-12" thread which eventually lead to ramjet's post with all the different bootloaders available. As suggested, I used JB's ICS bootloader and now in the bootloader page, it no longer say "locked" but "JuopunutBear" now. Onto flashing recovery.
Click to expand...
Click to collapse
Ok, so I tired to dabble in custom roms and I got burnt!!!
First things first,
HTC One X+ (International)
Version Main: 1.17.708.1
CID: HTC_622
S-On
HBOOT: 1.35.0000
Radio: 3.1204.168.32
I'm trying to RUU the device back to the stock and then never tinker again!
Can someone please step me through this, all the links I'm finding are dead or the RUU doesn't run.
Many thanks =)
Get hasoons20000 one x+ toolkit it has a link for ruu
Gave this a shot, I cannot find the appropriate RUU for my device.
****...
CJMilsey said:
Gave this a shot, I cannot find the appropriate RUU for my device.
****...
Click to expand...
Click to collapse
What country did you buy it from and what is your CID?
I bought it online (from Asia) The CID is 622 as above.
Addicted2xda said:
What country did you buy it from and what is your CID?
Click to expand...
Click to collapse
Bump
CJMilsey said:
Bump
Click to expand...
Click to collapse
Refer to the posting rules. You should not bump a thread within 24 hours...
You can download the RUU (ENRC2B) from this :
http://forum.xda-developers.com/showthread.php?t=2094118
you need to relock your bootloader before running the RUU
http://www.androidfiles.org/ruu/get...Radio_3.1204.168.32_release_299722_signed.exe
I'm sorry, I must have missed that one :/
I Tried this before but the RUU used didn't work, but I'll try to re-download and go from there.
(RUU_ENRC2B_U_JB_45_hTC_Asia_WWE_1.17.707.1_Radio_3.1204.168.32_release_299722_signed.exe)
Will it be a problem that my phone is 1.17.708.1 and that this is 1.17.707.1 (0.0.001 lower)?
Also, do I need to flash the stock recovery. And If so where would I go about getting it?
You will only have to relock the bootloader again and then (while in fastboot) run the RUU. Remember that you will lose everything on the device.
To relock the bootloader use Hansoon's toolkit. It has all the commands build in for easy use.
"Wrong CID" I'm not sure why this is wrong. 662 came back from fastboot getvar cid, and does indeed correspond to Hong Kong.
What would you advise from here dear sir?
CJMilsey said:
"Wrong CID" I'm not why this is wrong. 662 came back from fastboot getvar cid, and does indeed correspond to Hong Kong.
What would you advise from here dear sir?
Click to expand...
Click to collapse
Are you sure it's a generic HK CID? And not an operator locked one? Maybe you need the RUU from a particular operator.....
Sent from my HTC One X+ using Tapatalk 4 Beta
AndroHero said:
Are you sure it's a generic HK CID? And not an operator locked one? Maybe you need the RUU from a particular operator.....
Sent from my HTC One X+ using Tapatalk 4 Beta
Click to expand...
Click to collapse
I looked up the CID and it's just for HK, the phone came unlock so I doubt it needs a locked RUU. But hey, I've been wrong before.
Is there any reason the phone would not accept the correct RUU?
Okk,
This might seem a bit weird but I had the same issue with my Intl HOX+ and I have given it to hTC and they asked me to shell out aroun 18K to change the motherboard! (Which of course we all know is not required since this is a software issue).
So here is what I did:
1. I relocked the boot loader (I hope you have the unlock_code.bin with you, else get it from hTCDev)
2. Of course it started giving relocked security warning.
3. Again unlocked the boot loader and voila - it booted straight in to Elegancia!
This essentiially happens because unlocking the bootloader formats all the partitions except system and boot (I guess, because my media files were gone...).
See if this gets you through.
But DO IT AT YOUR OWN RISK!
I am talking about International HOX+, I do not know if ATT works in a different way.
Unfortunately that hasn't worked and I'm still stuck with the stall during boot :/
I think my best bet will the RUU, but I just can't get one that will work.
Do you know a ROM that I could side-load onto my device and just use it with that?
Thanks
Addicted2xda said:
Okk,
This might seem a bit weird but I had the same issue with my Intl HOX+ and I have given it to hTC and they asked me to shell out aroun 18K to change the motherboard! (Which of course we all know is not required since this is a software issue).
So here is what I did:
1. I relocked the boot loader (I hope you have the unlock_code.bin with you, else get it from hTCDev)
2. Of course it started giving relocked security warning.
3. Again unlocked the boot loader and voila - it booted straight in to Elegancia!
This essentiially happens because unlocking the bootloader formats all the partitions except system and boot (I guess, because my media files were gone...).
See if this gets you through.
But DO IT AT YOUR OWN RISK!
I am talking about International HOX+, I do not know if ATT works in a different way.
Click to expand...
Click to collapse
I had a small bootloader problem and was just surfing this section.I used your method of relocking and again unlocking and my problem was solved.I found it obligatery for me to thank you.
---------- Post added at 10:30 AM ---------- Previous post was at 10:21 AM ----------
CJMilsey said:
Unfortunately that hasn't worked and I'm still stuck with the stall during boot :/
I think my best bet will the RUU, but I just can't get one that will work.
Do you know a ROM that I could side-load onto my device and just use it with that?
Click to expand...
Click to collapse
I have unbricked mine by efforts of two long days and nights from about same problem. Provide the details and I will try to help you out,
1. can you boot to recovery.
2. If yes.which recovery you use.
3. what were you doing when this happened.
faandrabi said:
I have unbricked mine by efforts of two long days and nights from about same problem. Provide the details and I will try to help you out,
1. can you boot to recovery.
2. If yes.which recovery you use.
3. what were you doing when this happened.
Click to expand...
Click to collapse
1. No recovery works, and by mistake I performed a full erase with TWRP (don't ask me how, I honestly don't know why I did this) so despite all that they don't even exist anymore.
3. I flashed to Boot File as I couldn't get CM10.1 (Lior's HOX+ plug) to install and considered that my solve it. (I was wrong)
From this stuff I'm pretty sure it's broke, but I can get to the boot loader and recovery. Though I ran the appropriate (so I thought) RUU and it didn't work due to CID which stumped me.
CJMilsey said:
1. No recovery works, and by mistake I performed a full erase with TWRP (don't ask me how, I honestly don't know why I did this) so despite all that they don't even exist anymore.
3. I flashed to Boot File as I couldn't get CM10.1 (Lior's HOX+ plug) to install and considered that my solve it. (I was wrong)
From this stuff I'm pretty sure it's broke, but I can get to the boot loader and recovery. Though I ran the appropriate (so I thought) RUU and it didn't work due to CID which stumped me.
Click to expand...
Click to collapse
flash twrp through fasboot as only twrp provides side load option.
when twrp is flashed ,boot to recovery.side load incertcoin rom through hasoons toolkit.
don't worry about 707 or 708 etc.Mine was 707.1 but i am using incertcoin which is 401.3
after falshing incertcoin if it is again in boot loop then
use this command from adb
adb shell
wipe data
and reboot
you will be done.
CJMilsey said:
1. No recovery works, and by mistake I performed a full erase with TWRP (don't ask me how, I honestly don't know why I did this) so despite all that they don't even exist anymore.
3. I flashed to Boot File as I couldn't get CM10.1 (Lior's HOX+ plug) to install and considered that my solve it. (I was wrong)
From this stuff I'm pretty sure it's broke, but I can get to the boot loader and recovery. Though I ran the appropriate (so I thought) RUU and it didn't work due to CID which stumped me.
Click to expand...
Click to collapse
I hope you are on TWRP 2.5? If not update it...
And then use adb sideload
Hi,
I have the exact same problem.. I can get to TWRP recovery and HBOOT and my PC only detects the phone if its in recovery.
my CID is HTC__001.
I am trying to find a working RUU to run..
I tried this one: RUU_ENRC2B_U_JB_45_hTC_Asia_TW_1.14.709.17_Radio_3.1204.167.31_release_291089_signed.exe
(But that didn't work)
Any suggestions?
Thanks in advance.
rmuruga said:
Hi,
I have the exact same problem.. I can get to TWRP recovery and HBOOT and my PC only detects the phone if its in recovery.
my CID is HTC__001.
I am trying to find a working RUU to run..
I tried this one: RUU_ENRC2B_U_JB_45_hTC_Asia_TW_1.14.709.17_Radio_3.1204.167.31_release_291089_signed.exe
(But that didn't work)
Any suggestions?
Thanks in advance.
Click to expand...
Click to collapse
download incertcoin rom from hox+ android development & hasoon toolkit v2.4
boot in recovery
connect to pc
run onex+.exe and side load the rom
after it is done flash boot.img inside rom through fasboot command
and you will be done
Hi,
I have a Sprint HTC Evo3D
-HTCDev "Unlocked"
-Shooter XC Ship S-ON RL
-HBOOT 1.50
-TWRP Recovery 2.8.7 Loaded
I'm trying to make this phone usable, and all guides kind of shoot me in dead end. Nothing is working, and i tried flashing a bunch of random roms.
Can anyone give me directions, or point me in the right direction? I'm looking to revert this to a stock rom or something usable. Preferably the latest Andriod revision. I don't care for root, or anything special... I just need the wifi and browser, this isn't a service phone.
masterdukill said:
Hi,
I have a Sprint HTC Evo3D
-HTCDev "Unlocked"
-Shooter XC Ship S-ON RL
-HBOOT 1.50
-TWRP Recovery 2.8.7 Loaded
I'm trying to make this phone usable, and all guides kind of shoot me in dead end. Nothing is working, and i tried flashing a bunch of random roms.
Can anyone give me directions, or point me in the right direction? I'm looking to revert this to a stock rom or something usable. Preferably the latest Andriod revision. I don't care for root, or anything special... I just need the wifi and browser, this isn't a service phone.
Click to expand...
Click to collapse
Try to flash boot.img from the rom.rar that you have installed. What is your radio baseband version?
Coaxs94 said:
Try to flash boot.img from the rom.rar that you have installed. What is your radio baseband version?
Click to expand...
Click to collapse
How do i tell what radio baseband do i have?
When you say try to flash the boot.img, do you mean literally "fastboot flash recovery xxxx.img" to the system? I grabbed the VILLUMINATI-08152014-shooter.zip & it did flash via the TWRP, but did not boot up afterwards.
masterdukill said:
How do i tell what radio baseband do i have?
When you say try to flash the boot.img, do you mean literally "fastboot flash recovery xxxx.img" to the system? I grabbed the VILLUMINATI-08152014-shooter.zip & it did flash via the TWRP, but did not boot up afterwards.
Click to expand...
Click to collapse
No, actually "fastboot flash boot boot.img" to the system. Just extract boot.img form rom.zip and put it to your ADB tools folder a hit "fastboot flash boot boot.img" command, try it. Does bootloader shows your radio version? Check that.
villuminati, liquid smooth both require s-off and specific HBOOT.
you are s-on. cm11 won't run.
try a stock-based rom, those should work.
oops, read closer, you're not finding stock roms.
this one works ok without s-off on the two 3vo's I tried it on.http://forum.xda-developers.com/htc-evo-3d/cdma-development/rom-3d-anthology-12-18-2014-t2977403
bigsupersquid said:
oops, read closer, you're not finding stock roms.
this one works ok without s-off on the two 3vo's I tried it on.http://forum.xda-developers.com/htc-evo-3d/cdma-development/rom-3d-anthology-12-18-2014-t2977403
Click to expand...
Click to collapse
I tried flashing the base, waiting 20min, and got nothing. The phone is stuck on the white HTC boot screen logo. I then flashed the badassrom over it, and got the same result. FYI, i'm using the twrp recovery to flash both these roms.
Does anybody have a link to the stock rom? I tried the "PG86IMG_Shooter_S_Sprint_WWE_2.17.651.5_Radio_1.06.00.1216_NV_NV_spcs_1.42_release_233304-signed.zip" and it seemed to be stuck also.
Any other ideas?
you could try flashing an official RUU
they're posted in the stickies somewhere.
that'll rewrite all your firmware to something that should hopefully boot up.
bigsupersquid said:
you could try flashing an official RUU
they're posted in the stickies somewhere.
that'll rewrite all your firmware to something that should hopefully boot up.
Click to expand...
Click to collapse
When you flash the RUU, is that running through the executable? I find that impossible b/c it requires you to have a working OS first to start off with? Can you flash a RUU with fastboot?
masterdukill said:
When you flash the RUU, is that running through the executable? I find that impossible b/c it requires you to have a working OS first to start off with? Can you flash a RUU with fastboot?
Click to expand...
Click to collapse
there's .exe ruu's for window$ fastboot and PG86IMG.zip files for the root of your SD card in fastboot. since the phone's gotten long in the tooth a lot of links are dead so you may need to hunt a bit.
bigsupersquid said:
there's .exe ruu's for window$ fastboot and PG86IMG.zip files for the root of your SD card in fastboot. since the phone's gotten long in the tooth a lot of links are dead so you may need to hunt a bit.
Click to expand...
Click to collapse
Couldn't' find much working links on this forum, but i googled & found "PG86IMG_Shooter_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706_signed.zip" on other forums. Renamed it, rebooted to bootloader & this phone is alive again! Thanks for the help
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help