I was following the exact step-by-step guide here:
http://forum.xda-developers.com/showthread.php?t=1196808
and after I flashed the kernel downgrade, unplugged USB, power up the phone and immediately plug in after the vibrate, I never got the message in the next step that says "Connected Device: X10", and the "Root" button on the flash tool never became available.
Now my phone is permanently stuck at the "Sony Ericsson" black screen, it won't even turn off. I checked device manager and there are 2 hardware without any drivers. one of them says "Modem Device on High Definition Audio Bus", and the other says "SM bus controller". Does this have anything to do with my problem?
I'm running Win XP SP3, I tried to let it automatically search for drivers but it didn't find anything. I went to:
http://forum.xda-developers.com/showthread.php?t=1193066
and downloaded those drivers, but have no idea how to use them. Tried to use device manager to look for drivers in the downloaded folder and it doesn't recognize anything.
What now? At this point I don't care if I can still root my x10 or not, I just want to fix it so I can use it again. I tried PC Companion but it won't even recognize my phone, keeps telling me to enable USB when I can't even get past the SE screen.
You should try flashing a new ftf firmware bundle, then try the steps again.
ok finally fixed... had to use a friend's computer who is running win7 and actually automatically installed the drivers. everything went as explained on the guide... I guess the guide is not win xp friendly then
Hopefully u can help me, I think I bricked my new mini just 1 day after i received it...
I tried unlocking bootloader without loosing DRM using "s1tool" as mentioned in the thread in the development-section.
I never connected the phone to my PC before, maybe thats the Problem?
i downloaded s1tool, searched for the "testpoint" and did everything mentioned in the tutorial for unlocking, but after connecting phone i got the message "can't get S1 command header LOADER NOT RESPONDING".
I tried several times, running program as Admin, testing different usb-ports and two different cables, nothing worked.
Now my phone doesn't even turn on, nothing happens. It also is not recogniced by SEUS It's absolutely dead, no vibration, no light, nothing.
s1tool still shows the error mentioned above. if i try to connect phone to pc it is recogniced as "ZEUS flash device" doesn't matter if i press the volume down key or not, doesn't matter if i attach GROUND to test point or not, everytime i connect it it is "ZEUS flash Device"
I can't even use flashtool coz i can't get into flash mode.
What can i do now? please help me!!!!
thanks in advance
nobody any idea how to fix? I took GND from my PC, not from the mini itself, maybe that caused the problem?
Hello,
i got a little Problem with my X10 (2.3.3 - rooted) and my Notebook (Acer - Win 7 64 bit).
I tried all ways to install the driver to use USB-Debugging but it won't install. The Device-Manager still tells me SEMC USB as unknown
I tried the usual way, start the phone with holding 'back', install the drivers manually...
Are there any other ways to get it working ?
Same goes for me,
Device manager states that the device is unknown, flashtool not working, PC companion no hope (connected to different USB ports including those of the motherboard).
it used to work but no chance now.
it charges normally from the USB (Orange LED) but would not connect to the PC.
Details:
Windows 7 x64
Gigabyte X58A-UD3R
Bootloader Unlocked Xperia X10 with 2.3.3 ROM and Doom's Kernel (the latest one)
The guy here says it is related to either windows windows update or faulty cable
http://android.modaco.com/topic/347751-flash-mode-not-working/
Didn't help...
But installing PC Companion did it
PC Companion install drivers automaticlly,that is the best solution.
RQ-1 said:
Didn't help...
But installing PC Companion did it
Click to expand...
Click to collapse
Sent from my xperia "z10i"
I tried removing and installing PC Companion but it didn't work either.
Any help guys?
Changing the computer had no effect as well
You must install SEUS ( Sony Ericsson Update Service ). Only SEUS will install right driver. Problem with SEUS is that when you look on SE official site, they tell you that SEUS for X10 no longer persist, and they guide you to PC companion which is crap.
Try this: try to connect your phone with PC, in flash mode. PC will try to install your phone driver but it can't find it. Then in Action Centar, on PC, (a small flag in sys tray, right down corner of a screen) find solution for this problem, and windows will automatically find SEUS over net. Install and enjoy.
from X10i via XDA premium
tried that but no luck as well (even in flash mode SEUS can not detect the device)
Thank you
hello i found a way and it worked for me download flash tool and extract it look for a folder called drivers in there u will find something called ggsetup-2.2.0.10
run this install it and all done
@huzi7868 thank you for your help
However, that didn't succeed and I reinstalled windows and drivers again, but still not working
Even no luck when the phone is in flashmode
Just tried it on a third Computer and checked the cable but the cable is working on another HTC Desire but not on my Xperia X10 (I mean my X10 cable), however they are both charging
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
a.monteiro said:
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
Click to expand...
Click to collapse
I agree, I also have solved in this way.
Download the latest version of Flashtool and after installing it you will find in the "drivers" folder the file "Flashtool-Drivers.exe".
Run it and select the drivers you need. Then connect again your Xperia X10
I really appreciate your help, but I had done that 3 times and on different computers but "USB Device not recognized"
As I sad before, use SEUS to install SEMC USB DRIVER. I have win 7 64bit, and I install driver on it. First, install Update service. When its finished, start Update Service and follow instruction (check "Licence Agree" button, and click next, then pick your phone, X10i I suppose, be carefull there is two X10, One is X10, and other is X10 SO-01b. I pick X10 for myself, and press NEXT. Turn off your phone, press and hold BACK button on phone while connecting with PC via USB. HOLD till you see message to release BACK button. Till then your driver will be installed.
Download SEUS from here http://www.megaupload.com/?d=SBDVZ3DG
@Dzufa Thank you, but I had done that before and tried it again, whenever I connect the phone pressing the back button the green LED illuminates and "USB device is not recognized" appears and nothing happen after that, SEUS just behaves like nothing is connected.
Try with this one. And I think you must be online, because SEUS must download some files.
I really did that and of course updated SEUS, as I said green LED illuminates and nothing happens even in flash tool (it used to work for ages but suddenly it stopped, it only charges)
BTW, I had flashed many kernels and ROMs before it happened so I am quite familiar with flashtool and SEUS, I unlocked the bootloader using 9lucas method and it worked after that I installed XSP ROM and the USB worked as well, however after 2 weeks or so, one day I left it connected it to the PC and I found that the phone turned off and refused to power on, I left it for a while in the charger then powered it on and it powered on, then it has refused to connect to the PC through USB since then.
Please someone advise
I have read about a million threads and am unable to find the answer
My SE x10 mini e10i is in a constant boot loop showing the SE logo
I have tried using SEUS and it worked first time around,but after having tried a different rom to flash again with same problem
This time around it wont repair saying that the version is up to date
Also same with PC companion
First time around Flashtool did not work when I had my phone in USB debugging mode and started to flash it put USB debugging mode off and rebooted the phone. The only ftf that worked was nAa-08 - 2.6.29.6 loader and kernel. The rest of them it gave me the error of USB debugging turned off.
Now it doesn't even want to pass the logo and there is not CWM or xrecovery on the phone. When i try to flash it,the phone resets out of Flash mode and says USB debugging if off please turn on
Please if someone can advise. I even tried updating USB drivers,changing admin rights ex.
Damion1983 said:
Please someone advise
I have read about a million threads and am unable to find the answer
My SE x10 mini e10i is in a constant boot loop showing the SE logo
I have tried using SEUS and it worked first time around,but after having tried a different rom to flash again with same problem
This time around it wont repair saying that the version is up to date
Also same with PC companion
First time around Flashtool did not work when I had my phone in USB debugging mode and started to flash it put USB debugging mode off and rebooted the phone. The only ftf that worked was nAa-08 - 2.6.29.6 loader and kernel. The rest of them it gave me the error of USB debugging turned off.
Now it doesn't even want to pass the logo and there is not CWM or xrecovery on the phone. When i try to flash it,the phone resets out of Flash mode and says USB debugging if off please turn on
Please if someone can advise. I even tried updating USB drivers,changing admin rights ex.
Click to expand...
Click to collapse
bad luck 4 u......
i have this problem like this x10mini(my friend phone).....seus not work....flashtool say usb debugging if off...
but PC companion work for me...
SE X10mini with GINGER-DX
HAAHAHAH!!!
Can't believe it,after no sleep and lots of coffee
Got it working,plus flashed GingerDx which is one awesome amazing rom
The whole problem was with Windows 7
After extensive googling, I came across information that Windows 7 compatibility has issues with USB Debugging drivers
Had to set restrictions within Windows and then force install specified drivers
I used Flashtool with admin rights and first tried to flash a whole .ftf but did not succeed
The only .ftf that flashed was the E10_nAa-08_2.6.29.6-nAa-08.ftf
but that only includes a kernel and loader (but which helped me to be able to enter recovery
This is where i copied the Gingerdx.zip file on my SD card and tried to install
Did not work thou,baseband issue like before
So I took a chance,went back to Flashtool and tried to flash another .ftf file
2 of them failed due to the USB debugging issue. I un-installed the USB driver from computer manager,set Flashtool to only install baseband files and then hooked my phone up in flashmode plugged it in and wola,the driver like before installed (correct one for flash and not mass storage)
Thus from here did the whole .ftf flash and then in recovery mode installed the GingerDx.zip which worked now due to the baseband being correct
Thank you coffee,screw you Windows 7 (PS : also being 64bit)
And thank you for one awesome O/S stelios97
Sir I have encountered problem like yours, but with SE WT19i Live,
Please Elaborate this one..
Flashtool to only install baseband files and then hooked my phone up in flashmode plugged it in and wola,the driver like before installed (correct one for flash and not mass storage)
So here it is: it doesn't send the kernel in fastboot or in flashtool it doesn't flash the FTF...it get's stuck on both this programs. I've managed though to relock the bootloader with flashtool and then unlock it with fastboot. The problem is with my PC since my laptop can flash anything with any of this 2 programs. I need a answer because the laptop is not home for 2-3 days and I can't use the phone . I was thinking at reinstalling Windows since it's a driver error I think and it has 1 year+. Any ideas?
SOLVED: there was some error with the Windows. On a fresh windows install everything worked as it should.
TIP: I guess deleting the drivers and reinstalling should have helped but I didn't bothered.
You reinstalled Windows instead of reinstalling drivers..lol
Windows started to get funky not just android driver errors so...