HELP HARD BRICKED MY GALAXY S3 GT-19300 4.1.1 PLEASE HELP
I hard bricked my galaxy S III while trying to recover accidentally deleted photos from the gallery. I should have forgotten about the pictures and move on. I am hoping some of you geniuses here can help me figure out how to get my phone back. Galaxy is not under warranty. I want to say upfront that I am way out of my league and will probably say stupid stuff, please forgive me.
On day 1: I used skipsoft toolkit to root my phone. Before the root I did try to back up my phone. I chose #2 backup/restore your device. I do find some files; however, windows is unable to open them. After that, I chose #3 root options. Then, option #2 Flash recovery, root and busy box. Then, option #3 TWRP Touch recovery 2.7.1.0. Then, option #2 SuperSU 2.46 by chainfire. Then, option #2 sideload root file via custom recovery. I must say that I have no idea what all this means. Everything was fine and phone worked well.
Day 2: I followed this wonderful video at YouTube called
How to recover deleted Pictures and files off your INTERNAL memory on Samsung Galaxy Phones. Can put link because don't have 10 post yet. Sorry. However, I skipped the part about rooting and busy box because I use skipsoft to do those procedures. I performed all the procedures as directed, however when I got to Cygwin I couldn't get this program to work. I'm running windows XP. When I typed in util-Linux I only got 2 categories; however he got about 5. Stupidly, I continued with the process. I connected my phone in adb mode. I typed Adb then I typed adb start-server and pressed enter. Then I closed it out as he instructed. As I said earlier I could never get Cygwin to run. I installed it and uninstalled it several times, but had no luck. I disconnected my phone from the USB cable. Everything was working fine. When I went to bed the phone was fully charged, so I did not charge it. Upon awakening, the phone was DOA (dead on awakening) (normally dead on arrival).
The galaxy S III will not go into recovery or download load. It will not do anything, does not vibrate or have lights when charging. I tried all of the button combinations: Power, Home, volume down; power, home, volume up; Power, Home, volume down and volume up. Removed the battery, then tried all these combinations again. Remove the battery, sd card and SIM card and tried button combinations again. Removed battery, SIM card, and SD card and held the power button down. Plug the phone in via USB and tried all button combinations. None of these things worked. Tried a friend's Galaxy S III battery in my phone, dead. Tried my battery in their phone, and their phone dead. Tried friend's battery with all combination of buttons still no signs of life. Computer does not find phone.
I suppose that I hard bricked my phone or did something else happen? What about the backed up information on my computer, is there a way to retrieve it? Can someone please give me specific directions on unbricking my phone? I read somewhere on this forum that you could copy a bootloader from another phone to an SD card and copy that to your phone. However, I cannot take the chance of bricking someone else's phone. So if someone has some suggestions of how I can unbrick my galaxy S III I without JTAG or a jig, I would greatly appreciate it. Thank you!!!
You can't do anything without a usb jig, also you need a new battery.
You should take your phone to a repair centre and ask them if it worth repairing, there is no simple answer to the problems you created.
Thank you for replying!!! I took my phone today to a shop. They don't do jigs or JTAGs and couldn't offer much advice. Where I live is a small town and trying to find someone knowledgable here has been almost impossible. So I'm still in the same boat. I think I might try to order a jig and try it myself.
You did this:
Purpleandgold said:
HELP HARD BRICKED MY GALAXY S3 GT-19300 4.1.1 PLEASE HELP
On day 1: I used skipsoft toolkit to root my phone. ... I must say that I have no idea what all this means. ...
Click to expand...
Click to collapse
And now You wanna mess with jig?
Good luck...
martinsskutans said:
You did this:
And now You wanna mess with jig?
Good luck...
Click to expand...
Click to collapse
At this point I don't think there is a great deal to lose....but yeah good luck
It would be better to pay this money (price of jig) to someone who knows what to do - it's more realistic...
martinsskutans said:
It would be better to pay this money (price of jig) to someone who knows what to do - it's more realistic...
Click to expand...
Click to collapse
Do you know someone who would look at it for $2 or $3? But I agree find someone who might be able to fix it
Related
EDIT : I am now offering a $100 reward via PayPal to anyone that can offer me a solution to this problem. If you do not have a PayPal account, I will mail you a check for $100. Those are my only methods for payment. I am 100% serious about this by the way. From what I'm told, Nandroid backups are stored on the internal SD card, so even once the replacement phone arrives, I could not restore the nandroid backups on the (currently) broken phone over to the new one. I absolutely HAVE to get to those backups, and it is well worth $100 to me. NOTE : to be eligible for the reward, you MUST read the entire thread. I have already exhausted many common solutions to problems like this one, and am getting tired of getting offered the same advice over and over. If you fail to read the thread and offer me a solution that I have already attempted, I will not give you the $100 reward, even if you later are the one that comes up with the solution to my problem.
Please delete my other threads, I can't edit the title on them and they are outdated now.
This is my situation in a nutshell.
Downloaded Obsidian v2, wiped and flashed it. (this is my girlfriend's phone) - she did not like 2.2, so I wiped data/cache and attempted to restore the nandroid backup I had made. After hanging on 'restoring data' for 30 minutes I rebooted the phone, and now I'm here. The phone boots to the Vibrant logo only, I can get absolutely no other logos to show up no matter what I do. I realize now that I needed to flash a 2.1 kernel prior to restoring the Nandroid backup, but on my Droid, when I restore a nandroid backup that includes the kernel, so I did not know this step was necessary.
I have downloaded Odin but I have NEVER used it, so I am completely lost there as well. As far as I know, I simply need to download Odin, and then follow one of the many methods to access download mode. I have tried about 15 different methods of holding the buttons on the phone, plugging in the USB cable at the right time, etc. etc. etc. None of the methods work. The phone boots up to the Vibrant logo each and every time, no matter what. I downloaded and installed the Kies software so the drivers should be installed.
What do I do now? The phone is not hardware locked because I've used the buttons to access recovery many times. Is there a step I'm missing when it comes to Odin or do I just download it and open it? PLEASE give me instructions as if I am a child, because obviously whatever I'm doing is not working. PLEASE no vague instructions. I do not know how to use adb, odin, or basically how to do anything at all with this phone. I am a Droid user, and after I get her phone back to the way it was I will never attempt to hack it again. Thank you.
edit : also, yes I have pulled the SD card/SIM card.
I'm ready to give up on this.. is it possible to return this phone to T Mobile for a replacement, and if so, will her nandroid backups and titanium backup info be stored on her SD card? Then I could just root her new phone and restore the nandroid backup and be done with it. I promise, once I find some kind of solution, I am never hacking a Vibrant again. Far too complicated to hack non-stock google phones.
use Odin 1.3 or maybe higher
velocity92c said:
I'm ready to give up on this.. is it possible to return this phone to T Mobile for a replacement, and if so, will her nandroid backups and titanium backup info be stored on her SD card? Then I could just root her new phone and restore the nandroid backup and be done with it. I promise, once I find some kind of solution, I am never hacking a Vibrant again. Far too complicated to hack non-stock google phones.
Click to expand...
Click to collapse
I'm at work but do a search for odin 1.3 which worked for me. There is a thread that had all the files you need to get the phone back to stock kernel and all. If you haven't resolved the problem by tomorrow I'll try to find the thread for you or post the files if I can from my computer.
I'm already using 1.3 and I've already downloaded the all in one pack of files I need. Still can't get past the Vibrant screen to use Odin. I'm guessing since nobody has responded back with a way to fix this that I'm hosed, so can I take the phone to a TMO store and get a new one?
Download Mode
velocity92c said:
I'm already using 1.3 and I've already downloaded the all in one pack of files I need. Still can't get past the Vibrant screen to use Odin. I'm guessing since nobody has responded back with a way to fix this that I'm hosed, so can I take the phone to a TMO store and get a new one?
Click to expand...
Click to collapse
Have you tried turning the phone off then while holding the volume down button only, have odin running and plug in the usb cable to the phone? It should power on into download mode like that.
Email me [email protected]
The best phone in the world
I have literally tried every possible combination of holding down buttons, powering up, usb cable in, out, etc. etc. I searched the forum and tried at least 30n different "surefire" methods. Odin always sits there and does nothing, and the phone just goes to the vibrant screen.
jaliscojorge said:
Have you tried turning the phone off then while holding the volume down button only, have odin running and plug in the usb cable to the phone? It should power on into download mode like that.
Click to expand...
Click to collapse
I had to build an extremely ghetto Jig, which is just a 301kohm resistor going across pins 4 and 5 of a microusb plug. It sounds hard but its really not that bad, and unfortunately its the only way to get your phone into downloader mode if its hardware locked, like mine is.
As mentioned previously the phone is not hardware locked. I've accesssed recovery several times with the standard methods. Just got back from Tmobile and it will be a week before the new phone gets here. There has to be a way to fix this. Someone please help?
This is pretty weird because if the phone is not hardware locked, there's no reason that you can't get into download mode.
Just to be clear, so are you saying when you hold vol up + vol down ONLY, you will get vibrant screen?
Or when you hold volup + vol down THEN plug in the usb, it goes to Vibrant screen?
You need to be in download mode to use Odin, not recovery mode. Have you ever gotten into download mode via hardware? Was 'usb debugging' enabled? If so, go into download mode and follow Eugene's Froyo that doesn't brick.
I don't know how I can be anymore clear that the phone is not HWL and I cannot access download mode. I'm not trying to be an ass, it's just a very frustrating situation. I know you need to be in download mode to use Odin. I cannot get to download mode or this would be a cinch.
And to the poster before ^ this one, the phone goes to the Vibrant screen regardless of what button combination I press, or whether or not I hit any buttons at all. I've literally tried every combination possible, many many times.
I'm ready to throw this phone out the window. I have a hard time believing I am the only one to ever have this issue. It seems as though the answer to most problems is download mode + Odin but that does me no good.
Is there literally nothing else I can try?
From what I understand email thegreat520 he is supposed to be the guy to talk to I've heard it from a few posts
Still flashing
I know it can be frustrating, but excuse me for starting with the basics...
have you followed this youtube guide? I put it in the sticky because it was very helpful in my opinion.
http://www.youtube.com/watch?v=AnY7P14JSWQ
Here is another way I have not seen before:
http://www.youtube.com/watch?v=E9LYLoK1Qog
and why not post another
http://www.youtube.com/watch?v=rqxearzXrVY
I had the same issue search my post I used a froyo Rom when the phone 1st came out I download then something went wrong will flashing a new Rom I tried and tried odin did not work bc NO download mode I had got my phone the day it came out I just sent it back to tmobile pm ill explain how
Sent from my SGH-T959 using XDA App
Same issue
Used download mode many times, then did the same exact thing you did with the obsidian ROM. Now i cant get into download mode at all.
The method that worked 100% of the time previously (holding both volume buttons and then plugging the phone in while odin is runing) does not work. Tried a bunch of different methods and nothing.
There has to be a way to get around this.
OP, please try the method in the general sticky. It seems to fix the HWL issue.
WOW!
Without even plugging anything in, I:
1) Turned phone off
2) Held Vol. Down + Home button + Power
And that got me into download mode. I will proceed to try flashing back to stock now.
I have tried all the methods in the videos, and the issue is not related to the phone being HWL. It is not HWL. I have used the buttons to access the modes before. So please give me something unique to try besides a button combination, because none of them work. Am I literally the only one in the world that has ever had this problem before? I will paypal someone 50 bucks if they can help me fix this and that's not a lie. Her new phone won't be here for weeks and she is currently without a phone. Maybe I'm doing SOMETHING wrong but it is definitely not a button combination. I have literally tried them all, including with the USB cable in and out, and plugging it in at certain times during the process. Don't you normally get a charging icon when you plug the phone into the computer? All I get is the vibrant screen. Even if the phone is off, if I plug it into a computer without hitting any buttons, it turns on and goes to the vibrant screen. 50 dollars via paypal. You can't beat that. If you don't have paypal I will mail you a check, and no this is not a joke.
So I'm pretty much screwed huh? Can someone tell me if nandroid backups are stored on the SD card on the Vibrant? I will just wait til the new phone gets here and put the old SD card in the new phone and restore it if so.
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
machv5 said:
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
Click to expand...
Click to collapse
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
machv5 said:
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
Click to expand...
Click to collapse
I tried a jig and that didn't work. There must be some way of getting the device to give up on completing a task i no longer can give it due to ODIN being shut off.
Why is it that the "how to root/unlocks" never have the "if x fails then do these steps etc..." Had the how to had "pull the battery before disconnecting USB and don't reset or shut off ODIN" I wouldn't be in this mess. I realize that it's user beware but a few important steps like that in case of a fail would go a long way to you guys not shaking your heads. Instead of "silly nub hahahahahaha". No offence but I get that a lot and try to remember that when I teach someone how to use a computer. I am new at phones not at everything.
Further Developments Please can someone help?
I was giving someone a new memory card and they had a Samsung SGH-I896 it has an EB575152VA battery and the one I have the T959D has an EB575152VU battery. I exchanged my battery for hers by accident somehow and when I plugged my phone in it didn't go to the phone triangle computer logo screen it booted to recovery and said it couldn't charge the battery and kept rebooting to recovery. I got my battery back and it booted back to the phone triangle computer logo again. Grrrr....
The other thing I saw while the recovery screen was an error message that said
Code:
E:/data/fota not accessible
(may not be 100% accurate I don't have the battery to check right now but can get it again if need be) anyway I now see that there may be some light at the end of the tunnel. i have the correct stock firmware for the device I tried flashing it while in recovery but the phone kept rebooting before anything got done. My question is how can I get the dang phone to stop asking for Odin and go to recovery so I can flash stock firmware and ROM back to it? As I cannot as far as I know give it what it wants because I reset Odin and nothing seems to see that the phone is connected to the computer. I am going to try the other battery on a full charge to see what that does.
I am new at all this and want to get it fixed. I cannot afford to send it off to a service center and besides that I want to do it myself as I want to become a developer and droid technician. I would gladly donate to anyone but am still trying to get Google to accept my pay-as-you-go credit card and I don't have PayPal either. Which is really frustrating when it comes to giving back. I posted a Q&A on how to without PayPal or CC but as of the last time I checked no one has gotten back to me about it.
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
MultipleMonomials said:
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
Click to expand...
Click to collapse
That is correct. If you think that my idea below is a bad one or if I downloaded the wrong firmware package please let me know and /or you have a fix that will work? ty
I have though come up with an idea that may work. I am going to charge the "wrong" battery in erm the right phone lol and then use it to trick the device into booting into recovery instead of the cellphone triangle computer (CTC, for want of a better acronym) The I896 battery ends in a V not an ? (sorry can't rem don't have it on me) from the I896 model I think it is, plugging it into USB with the power off sends it to recovery with the "battery cannot be charged " message instead of the CTC screen.
I tried it but the charge in the battery was too low and rebooted. I am hoping that with a full charge (as long as I don't power on the phone first as this will make it go to CTC logo again.
I am hoping that I can install the update.zip that I made by first unzipping the T959UVJFD_firmware.tar I downloaded then unpacked and then repacked into an update.zip as I don't think that it will read the package as a tar file and if it's not called update.zip The recovery is still stock. If I get the phone working I am not going to try unlocking and rooting it again. I will just post two separate adverts one as a carrier locked device and the other one (higher of course to cover buying the unlock from Telus) as carrier unlocked and then I will buy the unlock code if the blah blah you get the drift. sorry for rambling on.
oh and I can't rem if I said this or not, In recovery it "E:/data/fota not accessible" I don't know what that means yet I have been busy with other things and haven't looked it up yet.
Since you can get into at least some version of recovery, your bootloader is intact and you should be able to unbrick it. You ought to be able to get into download mode using a download jig. You can get one on ebay for a few bucks or you can make one yourself. There's a guide floating around here somewhere that lets you make one from a microusb cable.
Posted from my Galaxy Tab with CM10
I am assuming no one has bricked this device yet but I believe I just did I am rooted and stuck at a welcome screen if anybody has a solution please help! if not I'm going to the store Saturday and telling them a silly lie
Yeah I just did too :/ I installed chainfire 3D and now it stays at the Verizon loading screen. It doesn't shut off, only reboots to this screen. Safe mode doesn't work. I'm hoping there is a way to fastboot, factory restore, etc. via USB. But I think I'm SOL
I just went up to the Verizon store and play dumb I was able to get mine replaced
Sent from my HTCONE using Tapatalk 2
I figured as much. I talked to someone over the phone and they said to bring it in for a replacement. So I'm going in tomorrow for a new one. Lesson learned haha
Sent from my XT907 using Tapatalk
Really hoping someone has came out with a unbrick/really BootLoop of Doom...
So I know a little about android and learn quick and there is very little information on the verizon ellipsis 7. Just so happens I bought one from a side shop and figured out Framaroot will easily root this device. Well you can guess what happen from there. All was going well until i rebooted with rom toolbox pro to change the font format for the second time. Now ever since it hasn't made it past the verizon screen and i cant take it back. Is there any possible way at all of somehow getting a custom recovery on this thing? Or even better a unbrick/bootloop? Oh and I CAN get it to go into stock recovery. Tried the Clear eMMC and Safe Mode but no luck.
Im in the same situation, I'm not able to boot into safe mode and clearing the emmc (formatting /data) doesn't seem to help either. I believe /data is just the user saved data, system data remains the same and is still corrupted. I had rooted, installed xposed framework and a few modules, rebooted fine the first time, but when I went to go change a setting within Ultimate Dynamic Navbar to make the stock navbar hide or not to hide, the script it used killed the tablet and now my wife's valentines day present is stuck in a bootloop. I'm going to try and take it back to verizon tomorrow after work, hopefully I can get yet another free tablet from big red... rvajuggalo said he was able to get it replaced right away even though it was rooted, anyone think I'll be fine taking it back as well? Or should I just wait til someone comes out with a fix for this issue?
wonton9224 said:
Im in the same situation, I'm not able to boot into safe mode and clearing the emmc (formatting /data) doesn't seem to help either. I believe /data is just the user saved data, system data remains the same and is still corrupted. I had rooted, installed xposed framework and a few modules, rebooted fine the first time, but when I went to go change a setting within Ultimate Dynamic Navbar to make the stock navbar hide or not to hide, the script it used killed the tablet and now my wife's valentines day present is stuck in a bootloop. I'm going to try and take it back to verizon tomorrow after work, hopefully I can get yet another free tablet from big red... rvajuggalo said he was able to get it replaced right away even though it was rooted, anyone think I'll be fine taking it back as well? Or should I just wait til someone comes out with a fix for this issue?
Click to expand...
Click to collapse
I was able to get a new one and mine was stuck in a boot loop
Sent from my XT907 using Tapatalk
Elipsis Bootloop Help!
rvajuggalo said:
I am assuming no one has bricked this device yet but I believe I just did I am rooted and stuck at a welcome screen if anybody has a solution please help! if not I'm going to the store Saturday and telling them a silly lie
Click to expand...
Click to collapse
If anyone has a clean copy of the system or firmware directories can you please share with me? --- Also if anyone knows how to get into the stock recovery without android debugging please explain? On a final note if anyone has a custom recovery that they could share that would be amazing as well. I'm in a bootloop and have been stuck in it for a couple weeks. Any assistance would be most appreciated.
dduncan55330 said:
I was able to get a new one and mine was stuck in a boot loop
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Thanks, that confirms it for me, I'll definitely take it back tonight, hopefully it's in stock and not back-ordered
wonton9224 said:
Thanks, that confirms it for me, I'll definitely take it back tonight, hopefully it's in stock and not back-ordered
Click to expand...
Click to collapse
VZW made me send my ellipsis to them for the screen issue after update, i unrooted it before sending it. They were able to fix it somehow because they sent mine right back fixed(i wrote down the serial)
mtk_droidroot_backup_Verizonellipses...HERE
Backed up my QMV7B before i Bricked it, now ive got two mtk paperweights pm me ,I'll link you to a backup on my drive. also bookending my desk is a lovely alcatel oone touch fierce 7024n which proudly boasts "ERROR 101 This phone has been flashed with unauthorized firmware and has been locked." niether of these will respond to any flash utility ive been able to conjure
Maybe you can use it. I need some hands on guidance flashing these. way too many tutos,way too many fllashtools, way too many drivers, usb cables, homemade serial cables, linux distros ,windows xp,7,8,8.1, hours, days,weeks,....... you get the picture.
apt-get ME_A_STRAIGHT_JACKET!
I know it can be done, i would like to learn from someone who ddoes it. its taking way to long to teach myself. and i still kinda like my wife but i doubt shell take much more.
#BRICKED --help
dereksilvers said:
Backed up my QMV7B before i Bricked it, now ive got two mtk paperweights pm me ,I'll link you to a backup on my drive. also bookending my desk is a lovely alcatel oone touch fierce 7024n which proudly boasts "ERROR 101 This phone has been flashed with unauthorized firmware and has been locked." niether of these will respond to any flash utility ive been able to conjure
Maybe you can use it. I need some hands on guidance flashing these. way too many tutos,way too many fllashtools, way too many drivers, usb cables, homemade serial cables, linux distros ,windows xp,7,8,8.1, hours, days,weeks,....... you get the picture.
apt-get ME_A_STRAIGHT_JACKET!
I know it can be done, i would like to learn from someone who ddoes it. its taking way to long to teach myself. and i still kinda like my wife but i doubt shell take much more.
#BRICKED --help
Click to expand...
Click to collapse
Do you think I could get a copy of that backup file?
DYI
rvajuggalo said:
I am assuming no one has bricked this device yet but I believe I just did I am rooted and stuck at a welcome screen if anybody has a solution please help! if not I'm going to the store Saturday and telling them a silly lie
Click to expand...
Click to collapse
If you're willing to open the back plate. (Back plate just pulls off. I'd suggest opening the sim/sd card slot and using that to pull it off. You need to disconnect the battery wait a few seconds, reconnect and then boot into recovery.
1. Black plate removal
2. Disconnect battery
3. Wait a few seconds
4. Reconnect battery
5. Press and hold Power and Down volume button until you see "Powered by Android"
6. Release the power button continue to hold down volume
7. Once in Factory recovery mode choose your best option
(I just factory reset it)
:good:
-love
A new development, possibly.
dereksilvers said:
Backed up my QMV7B before i Bricked it, now ive got two mtk paperweights pm me ,I'll link you to a backup on my drive. also bookending my desk is a lovely alcatel oone touch fierce 7024n which proudly boasts "ERROR 101 This phone has been flashed with unauthorized firmware and has been locked." niether of these will respond to any flash utility ive been able to conjure
Maybe you can use it. I need some hands on guidance flashing these. way too many tutos,way too many fllashtools, way too many drivers, usb cables, homemade serial cables, linux distros ,windows xp,7,8,8.1, hours, days,weeks,....... you get the picture.
apt-get ME_A_STRAIGHT_JACKET!
I know it can be done, i would like to learn from someone who ddoes it. its taking way to long to teach myself. and i still kinda like my wife but i doubt shell take much more.
#BRICKED --help
Click to expand...
Click to collapse
After making edits in system files I broke my QMV7B. Hangs on powered by android logo. In a panic, I wiped emmc from factory more (Chinese).. This reset ADB keys, and complicated matters further. After some digging I may have caught a break... I have figured out a way to stop and suspend the tablet in it's pre boot, or preloader, state. While suspended, it maintains COM3 connection with SPFT, and does not power cycle on and off. It also successfully installs it's onboard Preloader driver without error. Problem is that I need help attempting flash (for best chances)...
needing stock 4.4.4 fit the qmv7, or possibly advice on stock recover if possible.. I have successfully flased devices with Odin before, and have rooted almost every I have had.. I just want the best chance for success, and not to full brick the tab.. this could also be a solution for newer devices as well, but would like to for a good developer to speak with me before I post my findings. I will also post if I get the stock room compatible for flashing with SP Flash tool.. thanks guys..
Help
Please post specifics on how you achieved suspending in Preloader mode. That would help me alot.
I really need the un-rooted qmv7a stock rom, if any one could provide, that would be fan-freaking-tabulous lol...
no, for real i need the stock rom. I'd really appreciate it.
BTW
if you wanna get clean root on this device, i suggest this- http://forum.xda-developers.com/showthread.php?t=2748169
(has nothing to do with my need for a clean start, that was my own carelessness...)
Bondaddict said:
Please post specifics on how you achieved suspending in Preloader mode. That would help me alot.
Click to expand...
Click to collapse
Needle point method at USB port
ellipsis 7
I root my ellipsis 7 and install clockworkmod recovery after reboot in recovery struck on boot loop and not even access on recovery mode plz help
anybody still own one of these? lol
---------- Post added at 04:59 AM ---------- Previous post was at 04:41 AM ----------
LoveAboveAll said:
If you're willing to open the back plate. (Back plate just pulls off. I'd suggest opening the sim/sd card slot and using that to pull it off. You need to disconnect the battery wait a few seconds, reconnect and then boot into recovery.
1. Black plate removal
2. Disconnect battery
3. Wait a few seconds
4. Reconnect battery
5. Press and hold Power and Down volume button until you see "Powered by Android"
6. Release the power button continue to hold down volume
7. Once in Factory recovery mode choose your best option
(I just factory reset it)
:good:
-love
Click to expand...
Click to collapse
Hey man it's been 5years & I just wanna say thank you for posting this as I just managed to get into factory mode thanks to your comment xD. factory mode didn't help me a bit but maybe when I get to a PC I can use mtk tools to get a shell or something from there. Thanks again and if anybody has anything more than what's on here about this tablet please contact me as I feel like the last human on Earth with one ????
Yeh
I have one??
And Reading all topics about rooting this tablet...i'm afraid to do that?
Hey guys, I'm really hoping someone can tell me of a solution Ive not though of.... So Ive got the note 3 from sprint. currently had 4.4.4. I shoulda just left wellenough alone, I realize, But I tried to flash just a modem via mobileOdin and upon reboot, it will say "recoverybooting" and then I get the blue android. Thats all. This was just over 6 hours ago I did this and Im dead in the water, Ive SEARCHED the internet high and low and there are other facing similar problems, but it seems like every mishap Ive read about EVENTUALLY gets fixed. This just will not do anthing with any button combo as far as recovery and/or download mode. I cant access download mode either. recovery never actually boots, just a forever frozen blue android.. Now, with the phone attached via usb to my PC, it DOES see it as COM7, BUT REGARDLESS what ive tried it just remains at the "recovery booting" spot then blue android until I pull the battery again. Please HELP.! IF ANYONE HAS ANY SUGGESTIONS I would be just delighted if you may have some other approaches to this matter. THANKS! Please let me know iTs DESPERATE!
Zscott87 said:
Hey guys, I'm really hoping someone can tell me of a solution Ive not though of.... So Ive got the note 3 from sprint. currently had 4.4.4. I shoulda just left wellenough alone, I realize, But I tried to flash just a modem via mobileOdin and upon reboot, it will say "recoverybooting" and then I get the blue android. Thats all. This was just over 6 hours ago I did this and Im dead in the water, Ive SEARCHED the internet high and low and there are other facing similar problems, but it seems like every mishap Ive read about EVENTUALLY gets fixed. This just will not do anthing with any button combo as far as recovery and/or download mode. I cant access download mode either. recovery never actually boots, just a forever frozen blue android.. Now, with the phone attached via usb to my PC, it DOES see it as COM7, BUT REGARDLESS what ive tried it just remains at the "recovery booting" spot then blue android until I pull the battery again. Please HELP.! IF ANYONE HAS ANY SUGGESTIONS I would be just delighted if you may have some other approaches to this matter. THANKS! Please let me know iTs DESPERATE![/QUOTE
Have you tried removing the battery for a couple of minutes ? If you have read a couple of my threads on NH7 4.4.4, once your there downgrading anything is risky. Here is a link to read http://forum.xda-developers.com/note-3-sprint/help/4-4-4-download-mode-t2877528 . Here is a link for a recovery from a hard brick, by creating a boot image and then copy and paste it on a sdcard http://www.rom-central.com/showthread.php?87-GUIDE-HOWTO-Recover-from-a-HARD-BRICK-N900V-NC2-NC4 there are several sites on this type of fix, I just can't remember where they are. However, I do have something that may help, on one of those sites there was a link for someone who has already created a SM-N900P Unbrick img for Sprint and I downloaded it just in case. Here is the link http://www.mediafire.com/download/l6q1152x5c9d4h6/N900PUnbrick my copy. From what I understand you need to format/erase your sd card then copy and paste the unbrick img to the sd card from a PC. Pull the battery and install the sdcard back in the device, then try and boot the phone into download mode. Here is another link http://forum.xda-developers.com/showthread.php?t=2439367 I have not had to do this so you will have to do a little reading to be sure.
Click to expand...
Click to collapse
The fact that it still shows up as COM is a good sign.
Get a hold of ODIN 3.07+ I had issues with ODIN 3.06.
Here are a few things to try:
1.Take the battery out and hold all the buttons that you normally would to boot into recovery. While holding all the buttons, plug in the usb cable. If it boots into download mode, awesome, just put the battery in before you flash.
2. .Take the battery out and hold all the buttons that you normally would to boot into recovery. While holding all the buttons, plug in the battery. Hopefully it will boot into download mode.
3. try different cables, remember regular micro usb cables work with the note 3.
Make sure you put the modem file in the phone slot, and the rom/system tar in the pda slot.
Best of luck
Thanks for the suggestions guys! Iguess time is just what it needed. I actually fell asleep after trying for so long, and when I woke up I decided to try once more and VOILA... It let me into download mode! Went back to stock and have since been rebuilding . ha! Thanks again
:crying: So... I am a young teenage boy, who got an android, Samsung galaxy S3 Mini for my birthday, and I have had it for a year, I used an app to unlock the boot loader, but I was so happy that I turned it off before the operation was done I think, since I turned it off right when it got root access, I feel like I wanna kill myself, for reals...
I told my dad everything, he threw me at the the wall, shook me violently, and he raised his fist at me, I was terrified, and now I am trying to fix it with only a USB and Computer, no SD card since my damn uncle took my best one, my 32GB SD, and I have no JTAG or any modding device...
Please help, NOTHING HAPPENS, when I try to go into the boot loader, recovery mode, or factory mode, and it does not even show a LED light or it won't even buzz...
My friend had it for about a month, and he said once he held the power button for about a half an hour, and he said it quickly buzzed, but then nothing else happened...
I almost do not believe him so far, and I tried plugging it into my computer, it says everything is working fine, it detects it and everything, but I cannot go into the file system and Odin does not detect it... Please help!
Also, if my computer at LEAST detects it,or if it buxzed, can I fix it without a JTAG or SD card?