Related
I'm trying to flash my GNote and have a custom recovery. However when I try to flash a custom rom, CM10 in particular, I get an error that says Status 7. I have searched here and google and cannot find a fix or explanation of what is wrong. Any takers? Thanks for the help. :good:
cdanford said:
I'm trying to flash my GNote and have a custom recovery. However when I try to flash a custom rom, CM10 in particular, I get an error that says Status 7. I have searched here and google and cannot find a fix or explanation of what is wrong. Any takers? Thanks for the help. :good:
Click to expand...
Click to collapse
Update to the lastest cwm or use twrp. I recommend twrp.
just_visiting said:
Update to the lastest cwm or use twrp. I recommend twrp.
Click to expand...
Click to collapse
What version of twrp do you have?
cdanford said:
What version of twrp do you have?
Click to expand...
Click to collapse
Version 2.3.1.1
The link is in the Original Android Development forum.
http://forum.xda-developers.com/showthread.php?t=1647575
I got TWRP installed and flashed CM10 but it is stuck in the boot screen. I wiped cache, dalvik, and factory settings and flashing again. Any idea?
Got it working just fine. THanks for the support guys!
cdanford said:
Got it working just fine. THanks for the support guys!
Click to expand...
Click to collapse
Mind sharing how? I'm on the latest TWRP and CWM, and both cause a bootloop no matter what I do.
derArzt12 said:
Mind sharing how? I'm on the latest TWRP and CWM, and both cause a bootloop no matter what I do.
Click to expand...
Click to collapse
He had an error. Not a bootloop. You're doing something wrong.
Sent from my GT-N7005 using xda premium
joe3681 said:
He had an error. Not a bootloop. You're doing something wrong.
Sent from my GT-N7005 using xda premium
Click to expand...
Click to collapse
cdanford said:
I got TWRP installed and flashed CM10 but it is stuck in the boot screen. I wiped cache, dalvik, and factory settings and flashing again. Any idea?
Click to expand...
Click to collapse
I have the same error, which causes a bootloop. And in his comment it says he's stuck in one.
status 7 error message:radio
kindly check your radio base band and update xxlf1 using thread and try the update again
Installed MESA HYBRID 4.3 Yesterday and i am not able to install any CM10/10.1 based ROM
Whether it be PACman/CM/AOKP or the unofficial Cm10.1 by shufuking.
Everytime i try to install any rom except Stock based ICS Rom's I get a STATUS 7 error
Tried removing the first three lines from the updater script and it still dosent work
Re: Trouble installing CM10./10.1
Million threads on status 7 error, give some of them a read.
Sent from Myushi
Been there,done that
Tried everything before posting
Thats the only reason I posted it here on XDA
BTW,ICS ROMs install fine...all of em actually !
antechx said:
Been there,done that
Click to expand...
Click to collapse
You've only listed one thing you've tried, but if you have tried everything else then god knows.
status 7 error means you formatted the system. Never format system. Try a google search. you will get xda links of people explaining how to recover from that.
http://forum.xda-developers.com/showthread.php?t=1884746
this thread will help.
dekanayanjyoti said:
status 7 error means you formatted the system. Never format system. Try a google search. you will get xda links of people explaining how to recover from that.
http://forum.xda-developers.com/showthread.php?t=1884746
this thread will help.
Click to expand...
Click to collapse
Thanks for the help , but unfortunately this didnt helped me either...
Tried installing the ROM without Formatting the system while wiped the data and cache .
Still gives me the ****ty status 7 error .
@XperienceD - Even tried FXP 213 and MIUI 142.
Gives the same error.
Re: Trouble installing CM10./10.1
This happens to me too.
So the best solution for now. Flash the roms you want using the provided kernel.
Then take a backup, flash Mesa, switch between roms via restoring them from recovery.
I do so
Sent from my ST15i using xda app-developers app
Mysteryagr said:
This happens to me too.
So the best solution for now. Flash the roms you want using the provided kernel.
Then take a backup, flash Mesa, switch between roms via restoring them from recovery.
I do so
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
I know that will work, but I really wanted a workaround for this :/
Switching kernels every time isn't a solution after all
You dont delete system for first instal JB
SalyczeQ said:
You dont delete system for first instal JB
Click to expand...
Click to collapse
Still gives the error :[
Got any other solutions ?
antechx said:
Still gives the error :[
Got any other solutions ?
Click to expand...
Click to collapse
I had this problem as well. I searched through google and found out the solution is to flash a newer version of CWM which actually worked for me. I couldn't find a separate package with CWM but I found a kernel containing it. Everything has been fine since then.
Trzepaczka said:
I had this problem as well. I searched through google and found out the solution is to flash a newer version of CWM which actually worked for me. I couldn't find a separate package with CWM but I found a kernel containing it. Everything has been fine since then.
Click to expand...
Click to collapse
Flashed to a newer version of CWM ?
I guess MESA already has CWM6.xx
You found a kernel containing it means ? Most of the kernels already use CWM as default recovery I guess
antechx said:
Flashed to a newer version of CWM ?
I guess MESA already has CWM6.xx
You found a kernel containing it means ? Most of the kernels already use CWM as default recovery I guess
Click to expand...
Click to collapse
Lupus uses twrp, actually the newer kernels come either as dual or with twrp.
mnishamk said:
Lupus uses twrp, actually the newer kernels come either as dual or with twrp.
Click to expand...
Click to collapse
MESA also uses dual recoveries and TWRP as default.
What did he exactly meant ?
Flash another CWM on top of the pre-installed recovery ?
?? Anyone ? knows how to update CWM ?
antechx said:
?? Anyone ? knows how to update CWM ?
Click to expand...
Click to collapse
if you have unlocked bootloader, try some of the kernels which use newer cwm or twrp.
if on locked, i think xparts installs latest cwm.
antechx said:
Still gives the error :[
Got any other solutions ?
Click to expand...
Click to collapse
Flash boot.img (in the zip by rom)
Install Zip
Install Gapps
Wipe data (do this first and only once and never do it again)
then flash custom kernels ..
mnishamk said:
Lupus uses twrp, actually the newer kernels come either as dual or with twrp.
Click to expand...
Click to collapse
!I hope not cause twrp only,are bad news
Actually will not happen cause this recovery has problems with our phones
Sent from my ST15i using xda app-developers asp
TWRP has problems with our the 2011MDPI's ?
antechx said:
TWRP has problems with our the 2011MDPI's ?
Click to expand...
Click to collapse
no
---------- Post added at 09:41 PM ---------- Previous post was at 09:37 PM ----------
aftergr said:
!I hope not cause twrp only,are bad news
Actually will not happen cause this recovery has problems with our phones
Sent from my ST15i using xda app-developers asp
Click to expand...
Click to collapse
i m using lupus twrp,no problem
Hi Friends in deep trouble..
i am on dn4 v2.1
i just flashed twrp-2.8.6.0-t03gub.img.tar from here http://twrp.me/devices/samsunggalaxynote2n7100.html
i thought this is the latest TWRP
now i have lost my mobile network
can some one help me plz ...
friend.
for gt-7100 is correct this twrp-2.8.6.0-t03g.img.tar.
caution - twrp-2.8.6.0-t03gub.img.tar, twrp-2.8.6.0-t03gduoszn.img.tar, are other devices
size > 8MB, beyond the incompatibility and lost partition EFS, now recovery using stock rom .
Messed up with dev/block and efs !
Download stock rom for n7100 from samsung's official site.
Flash stock rom using odin.
This will reset your modem/radio (lost IMEI) and efs folder.
wow
Friend < dont bother and dont do anything more < U just download Stock firmware from sam mobile site and flash using Odin, I faced same problem and after flashing stock everything ok So dont try to restore efs and else just flash stock and all will b done u can contact me 9825854599
vinodxxx said:
Hi Friends in deep trouble..
i am on dn4 v2.1
i just flashed twrp-2.8.6.0-t03gub.img.tar from here http://twrp.me/devices/samsunggalaxynote2n7100.html
i thought this is the latest TWRP
now i have lost my mobile network
can some one help me plz ...
Click to expand...
Click to collapse
I know the feeling...i avoid all the TWRP updates and keep only the version 2.7.2.1, with this one i have no problems at all. The version 2.8.5 worked well...but after my 3rd ou 4th flash/reflash ROM i lost the Mobile Network...and yes, im pretty sure that was caused by the recovery.
After fix the mobile network problems, i reversed to TWRP 2.7.2.1...flash, reflash and flas again the same ROM and its all working fine.
I never had any problems with CWM..but TWRP make F2FS easy to implement on nandroid, thats why i keep using it.
I Just get the Mobile Netwok back, after flashing oficial Sammy ROM with desktop Odin.
GL.:good:
Hey guys just flash the modem and you are all good. No need to do the full odin rom.
Sent from my SPH-L900 using XDA Premium 4 mobile app
sound good !
jlmancuso said:
Hey guys just flash the modem and you are all good. No need to do the full odin rom.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
vinodxxx said:
Hi Friends in deep trouble..
i am on dn4 v2.1
i just flashed twrp-2.8.6.0-t03gub.img.tar from here http://twrp.me/devices/samsunggalaxynote2n7100.html
i thought this is the latest TWRP
now i have lost my mobile network
can some one help me plz ...
Click to expand...
Click to collapse
I fell in the same problem few hours ago....
wilyman said:
friend.
for gt-7100 is correct this twrp-2.8.6.0-t03g.img.tar.
caution - twrp-2.8.6.0-t03gub.img.tar, twrp-2.8.6.0-t03gduoszn.img.tar, are other devices
size > 8MB, beyond the incompatibility and lost partition EFS, now recovery using stock rom .
Click to expand...
Click to collapse
That's right... but I found that out after flashing the recovery I discovering I've lost my signal & IMEI
Problem is the files are under the link of GT N7100 with no reference to any sub-types...
jlmancuso said:
Hey guys just flash the modem and you are all good. No need to do the full odin rom.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
that's 100% correct.. Thank you. I just got the Modem only file and flashed it with PC Odin and all is well now.
zoghrob said:
I fell in the same problem few hours ago....
That's right... but I found that out after flashing the recovery I discovering I've lost my signal & IMEI
Problem is the files are under the link of GT N7100 with no reference to any sub-types...
that's 100% correct.. Thank you. I just got the Modem only file and flashed it with PC Odin and all is well now.
Click to expand...
Click to collapse
I'm having the same issue. Can i get the link to the modem Please? I'm currently downloading the full rom and its taking really long
last week faced same problem
Ntning was working on it. Even z3x box was not working on it.
Then download full stock rom and flash .
Anyone know is twrp problem or Odin 3.10
same problem here. i lost modem .
i think it is a bug in this kernal
b4 doing this update i hav backud up my modem efs boot via twrp...
so restored d same.
Mazupicua said:
I'm having the same issue. Can i get the link to the modem Please? I'm currently downloading the full rom and its taking really long
Click to expand...
Click to collapse
Sure, here it is.
Modem Only XXUFND3
I just googled for:
XXUFND3 Modem only download
Just make sure it's the same build as your firmware. This is for ND3
Good luck.
zoghrob said:
Sure, here it is.
Modem Only XXUFND3
I just googled for:
XXUFND3 Modem only download
Just make sure it's the same build as your firmware. This is for ND3
Good luck.
Click to expand...
Click to collapse
Thank you. the download did finish before i saw your answer so i just went ahead and flashed stock. highly appreciate it
Hi
Problem is in flashing this recovery twrp-2.8.6.0-t03gub.img.tar t03gub is not for n7100 u must find 2,8,6,0-t03g for n7100[/SIZE]
97292lucky said:
last week faced same problem
Ntning was working on it. Even z3x box was not working on it.
Then download full stock rom and flash .
Anyone know is twrp problem or Odin 3.10
Click to expand...
Click to collapse
Thank u very much.. u gave me perfect solution..
hey guys , i had the same problem after flashing twrp on my note 2 {e250s}, but i flashed the modem and everything was ok, but when i run a ussd command , it pops up in korean language,pls help
97292lucky said:
last week faced same problem
Ntning was working on it. Even z3x box was not working on it.
Then download full stock rom and flash .
Anyone know is twrp problem or Odin 3.10
Click to expand...
Click to collapse
Just instal twrp .zip (through recovery) and you will have no trouble
Sent from my SM-N910C using XDA Forums Pro.
Applied twrp-2.8.0.0-l900.img and modem.bin
To clarify my issue (same as OP): Applying twrp-2.8.6 seems to have ganked my modem. Everything else works. I tried MULTIPLE times to restore to factory, then apply twrp then restore from backup. Found out it is only happening AFTER I apply twrp 2.8.6. I finally found a copy of twrp 2.8.5 for the L900 but that has the same issue, so I applied 2.8.0 and the modem bin at the same time. This seems to have fixed the radio and i am back to functionality AND twrp is installed.
Now, I am not POSITIVE that it requires both actions (it might just be an issue with 2.8.5 and 2.8.6), but the solution was:
Code:
heimdall flash --RECOVERY twrp-2.8.0.0-l900.img --RADIO ./ALL_SPT_L900VPUCNE2_L900SPTCNE2_1561791_REV04_user_low_ship/modem.bin --no-reboot
If I have to do this again, I would apply twrp-2.8.0.0-l900.img first using your loader of choice (Odin3 or heimdall et al.) and see if that was all that was necessary or they both have to be applied (for some wildly cool magics that I am sure no one would be able to figure out).
peter.scordamaglia said:
Now, I am not POSITIVE that it requires both actions (it might just be an issue with 2.8.5 and 2.8.6), but the solution was:
Code:
heimdall flash --RECOVERY twrp-2.8.0.0-l900.img --RADIO ./ALL_SPT_L900VPUCNE2_L900SPTCNE2_1561791_REV04_user_low_ship/modem.bin --no-reboot
Click to expand...
Click to collapse
Oh man, thanks so much for posting this. I ran into the same trouble (flashed latest twrp and lost network). Just ODINed the modem.bin back and my phone is back!
I'm not able to flash any custom ROM..
I had flashed before but then I came back to stock and now it just doesn't work..
I first tried RR ROM it flashes and in end says unmount of /system failed (which I know can be ignored.) when I boot it just remains in boot animation.
Then I tried Ashwins cm13 again same.. It just stays in animation.
Then Cm 12.1 and it also stays in animation.. I also wiped internal thinking maybe it would help but it didn't..
At last I flashed stock and it just flashes fiine and boots..
Note : I'm using TWRP 3.0.0-1 the official one..
Any help would be appreciated
Sent from my ONE E1003 using Tapatalk
hey if u are on stock.i guess u again installed twrp and r rooted.
the reason is that u need to go to advanced wipe.check dalvik,cache,data,system..wipe.dont touch internal and micro sd if u want to save your data.then go back and try the install again.let me know if its successful
sand87ch said:
hey if u are on stock.i guess u again installed twrp and r rooted.
the reason is that u need to go to advanced wipe.check dalvik,cache,data,system..wipe.dont touch internal and micro sd if u want to save your data.then go back and try the install again.let me know if its successful
Click to expand...
Click to collapse
Dude.. I always do the same.. I also wiped internal.. (Already mentioned..). Thanks for replying.
Sent from my ONE E1003 using Tapatalk
sarthakspiker said:
Dude.. I always do the same.. I also wiped internal.. (Already mentioned..). Thanks for replying.
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
could you try with twrp 2.8.7.0...which i guess is the older version.i think i read smwhr in this forum that the latest twrp has issues.not sure abt that but do try the above version
sand87ch said:
could you try with twrp 2.8.7.0...which i guess is the older version.i think i read smwhr in this forum that the latest twrp has issues.not sure abt that but do try the above version
Click to expand...
Click to collapse
I don't really think that should be am issue.. Coz stock is working just fine.. And I was already planning it.. Just did a twrp back hope .
Sent from my ONE E1003 using Tapatalk
Damn.. TWRP 2.7.8.0 just solved it... So there are issues in 3.0.0-1
Sent from my OnePlus X using Tapatalk
sarthakspiker said:
Damn.. TWRP 2.7.8.0 just solved it... So there are issues in 3.0.0-1
Sent from my OnePlus X using Tapatalk
Click to expand...
Click to collapse
great to know
If there are issues with TWRP, you seem to be the only one experiencing them.
Flash the full stock ROM and start from the beginning.
TWRP has gone official, so there's no use posting on eng.stk's kernel thread about it.
Hi,
i have a glaxy S2 i9100 that i have convert from a galaxy S2 shw-m250s (korean version)
Everythings worked perfectly but since i have convert it i am unable to flash any ROM on it using Odin. i have tried numerous tutorials and available ROMs but i got nothing
the process always stuck on <ID:0/098> zImage no matter the time i wait it don't move.
I don't know what's the problem since the phone boot and works very well.
Please i need help
galaxy S2 i9100
4.1.2 jelly Bean
Kernel XWLSD
Phone XXLS8
bikclaude said:
Hi,
i have a glaxy S2 i9100 that i have convert from a galaxy S2 shw-m250s (korean version)
Everythings worked perfectly but since i have convert it i am unable to flash any ROM on it using Odin. i have tried numerous tutorials and available ROMs but i got nothing
the process always stuck on <ID:0/098> zImage no matter the time i wait it don't move.
I don't know what's the problem since the phone boot and works very well.
Please i need help
galaxy S2 i9100
4.1.2 jelly Bean
Kernel XWLSD
Phone XXLS8
Click to expand...
Click to collapse
Hi
I do not know about korean device.
But on i9100 international you have to root your device, then For installing cm13 for instance you have to repartition first and install twrp 3.x.x and cm13 and gapps which you do by flashing zip-files in recovery (Not with odin).
You should search for the developer @CNBLACK who made 5.1.1 and 6.0.1 roms for i9100 and for korean devices aswell (named 250 or similar)‘
Sent from my ME173X using XDA-Developers mobile app
TriboDoP said:
Hi
I do not know about korean device.
But on i9100 international you have to root your device, then For installing cm13 for instance you have to repartition first and install twrp 3.x.x and cm13 and gapps which you do by flashing zip-files in recovery (Not with odin).
You should search for the developer @CNBLACK who made 5.1.1 and 6.0.1 roms for i9100 and for korean devices aswell (named 250 or similar)‘
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
thanks for the reply
i was not able to flash any root kernel like cf-root (remember! odin always fail!) so i used kingoroot to root my phone. i successfully did it but the problem remaind the same i cannot flash twrp 3.x.x. i dont know why.
Any one else with a solution please? thanks a lot
bikclaude said:
thanks for the reply
i was not able to flash any root kernel like cf-root (remember! odin always fail!) so i used kingoroot to root my phone. i successfully did it but the problem remaind the same i cannot flash twrp 3.x.x. i dont know why.
Any one else with a solution please? thanks a lot
Click to expand...
Click to collapse
On i9100 int. you can flash philz cwm6 stockkernel.zip which has root by using stock-recovery because it is a zip-file (no need for odin)
And If you flash isorec twrp it will not show up If are not on an isorec-kernel.
So after installing philz use again recovery to install latest latest cm11 20161119 by @zjq985062714 i9100.zip (has isorec kernel) and isorec twrp 3.0.2-1.zip by @the.gangster.
Again this works without odin just using recoveries.
Then you can do repartitioning and flashing cm13 of others.
This is How i do it always On my i9100 international.
Sent from my ME173X using XDA-Developers mobile app
TriboDoP said:
On i9100 int. you can flash philz cwm6 stockkernel.zip which has root by using stock-recovery because it is a zip-file (no need for odin)
And If you flash isorec twrp it will not show up If are not on an isorec-kernel.
So after installing philz use again recovery to install latest latest cm11 20161119 by @zjq985062714 i9100.zip (has isorec kernel) and isorec twrp 3.0.2-1.zip by @the.gangster.
Again this works without odin just using recoveries.
Then you can do repartitioning and flashing cm13 of others.
This is How i do it always On my i9100 international.
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
thanks but i don't have any CWM recovery installed. i should i flash zip files?
bikclaude said:
thanks but i don't have any CWM recovery installed. i should i flash zip files?
Click to expand...
Click to collapse
Hi
Maybe you overlooked it in my Post.
I wrote you can install philz Kernel by using STOCK - RECOVERY. On switched off device press 3 buttons at the same time until stock recovery appears ( Volume up-, power- and home-button).
Then move to "apply update" and choose philz.zip from SD card (of course you have to copy it on
card first).
Reboot System.
Switch off device
Reboot in recovery using 3 buttons and you will have custom recovery to continue.
Sent from my ME173X using XDA-Developers mobile app
I need to look up for my OLD SGS2, couse I see this phone cannot die!!!
Marun1982 said:
I need to look up for my OLD SGS2, couse I see this phone cannot die!!!
Click to expand...
Click to collapse
True!
We have already some nice mm-roms and our devs just cooking Nougat for our Phone!
Sent from my STAIRWAY using XDA-Developers mobile app
TriboDoP said:
Hi
Maybe you overlooked it in my Post.
I wrote you can install philz Kernel by using STOCK - RECOVERY. On switched off device press 3 buttons at the same time until stock recovery appears ( Volume up-, power- and home-button).
Then move to "apply update" and choose philz.zip from SD card (of course you have to copy it on
card first).
Reboot System.
Switch off device
Reboot in recovery using 3 buttons and you will have custom recovery to continue.
Sent from my ME173X using XDA- mobile app
Click to expand...
Click to collapse
Hi,
i have successfully install the philz recovery but the problem who came out is that my phone now hardly boot and always stuck on the samsung logo. i can some times enter the custom recovery. i don't really know what's the problem. is there any solution to that? should i continue installing CM11 (or 12.1 maybe)?
help please. i think i'm loosing my phone
bikclaude said:
Hi,
i have successfully install the philz recovery but the problem who came out is that my phone now hardly boot and always stuck on the samsung logo. i can some times enter the custom recovery. i don't really know what's the problem. is there any solution to that? should i continue installing CM11 (or 12.1 maybe)?
help please. i think i'm loosing my phone
Click to expand...
Click to collapse
Hi
This is strange. Philz kernel is well known as a safe kernel which has been used by many people.
Did you look for the correct version for your device ?
I am not sure but it should be PhilZ-cwm6-XWLSD-OXX-4.87-signed.zip (or similar)
Anyway you could try to make a Backup in recovery.
Then i would flash cm11 and twrp which i mentioned before.
In case you flashed wrong kernel flash correct PhilZ kernel or cwm 6.0.4.7
Then flash cm11 and twrp.
Just want to say once more all this works fine On i9100 int. and i do not know if your device is different in any way.
Did you read the threads by @CNBLACK which i recommended?
Sent from my ME173X using XDA-Developers mobile app
Okay, I checked this thread.
You must upgrade to Stock JB Firmware.
And If you already to use Stock JB, Check my SGS2 thread (u1skt).
TriboDoP said:
Hi
This is strange. Philz kernel is well known as a safe kernel which has been used by many people.
Did you look for the correct version for your device ?
I am not sure but it should be PhilZ-cwm6-XWLSD-OXX-4.87-signed.zip (or similar)
Anyway you could try to make a Backup in recovery.
Then i would flash cm11 and twrp which i mentioned before.
In case you flashed wrong kernel flash correct PhilZ kernel or cwm 6.0.4.7
Then flash cm11 and twrp.
Just want to say once more all this works fine On i9100 int. and i do not know if your device is different in any way.
Did you read the threads by @CNBLACK which i recommended?
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
Eureka!!!! i have found the problem and solution!!!
as i've previously said, my phone was rooted using kingoroot. once i have installed philz, it start bugging. So i though myself maybe there was a conflict between superuser by kingoroot and superuser by philz. i tried to unistall kingoroot but i was unable tu unistall superuser (don't really know why). nevetheless i have disabled the kingoroot superuser in application manager and the problem just disappeared. now my phone is working perfectly. i have repartitionned it in 6Gb internal and 7Gb USB. i'm ready for the next step.
thanks a lot Sensei
CNBLACK said:
Okay, I checked this thread.
You must upgrade to Stock JB Firmware.
And If you already to use Stock JB, Check my SGS2 thread (u1skt).
Click to expand...
Click to collapse
sorry but i'm confused. as i have mentionned in my post, my phone was originaly a SHW-M250S but i have convert it in gt-i9100 by using a pit file and flashing a new firmware. so i should continue by flashing cyanogenmod for SHW-M250S or for gt-i9100?
bikclaude said:
Eureka!!!! i have found the problem and solution!!!
as i've previously said, my phone was rooted using kingoroot. once i have installed philz, it start bugging. So i though myself maybe there was a conflict between superuser by kingoroot and superuser by philz. i tried to unistall kingoroot but i was unable tu unistall superuser (don't really know why). nevetheless i have disabled the kingoroot superuser in application manager and the problem just disappeared. now my phone is working perfectly. i have repartitionned it in 6Gb internal and 7Gb USB. i'm ready for the next step.
thanks a lot Sensei
Click to expand...
Click to collapse
Glad your device is working again.
Please keep in mind that (on i9100) you have to increase the SYSTEM partition to 1 GB or more If you want to flash any cm13 or cm14 rom.
As far as i can see you increased only data (internal) partition.
Sent from my ME173X using XDA-Developers mobile app
bikclaude said:
sorry but i'm confused. as i have mentionned in my post, my phone was originaly a SHW-M250S but i have convert it in gt-i9100 by using a pit file and flashing a new firmware. so i should continue by flashing cyanogenmod for SHW-M250S or for gt-i9100?
Click to expand...
Click to collapse
Hi again
My opinion is: once the device is converted to i9100 it should behave like one.
Maybe anybody can confirm this.
If it were my device i would make a
- backup in recovery (important!)
Then i would have a go and make
- clean flash of latest cm11 + gapps + twrp 3 ( i think i mentioned the Files before).
If it works - fine! (and can think about flashing other roms).
If it does'nt work: restore the backup from recovery .
But it is your device and your decision.
Sent from my ME173X using XDA-Developers mobile app
TriboDoP said:
Hi again
My opinion is: once the device is converted to i9100 it should behave like one.
Maybe anybody can confirm this.
If it were my device i would make a
- backup in recovery (important!)
Then i would have a go and make
- clean flash of latest cm11 + gapps + twrp 3 ( i think i mentioned the Files before).
If it works - fine! (and can think about flashing other roms).
If it does'nt work: restore the backup from recovery .
But it is your device and your decision.
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello! i'm back again:cyclops:
i have successfully install Philz but when i tried to intall the CM11, in had a fail with this message "set_metadata_recursive: some changes failed".
fortunately i have revovered the stock ROM.
so what's the problem? maybe it's the CM11 i have flash? any other help or link please?
thanks a lot
Regards,
bikclaude said:
Hello! i'm back again:cyclops:
i have successfully install Philz but when i tried to intall the CM11, in had a fail with this message "set_metadata_recursive: some changes failed".
fortunately i have revovered the stock ROM.
so what's the problem? maybe it's the CM11 i have flash? any other help or link please?
thanks a lot
Regards,
Click to expand...
Click to collapse
Hi
cm11 should not make any trouble at all.
I do not know why this message turned up.
Please tell me what exact Recovery you used for flashing (e.g. philz cwm 6.0.4.7) and which cm 11 you flashed.
Maybe the Recovery should be updated to latest.
Still I wish somebody would confirm that your korean converted device can be treated as an i9100.
Sent from my ME173X using XDA-Developers mobile app
---------- Post added at 08:56 PM ---------- Previous post was at 08:46 PM ----------
Hi again
Just did some searching and a reason for this error is as I supposed:
You have to update the Recovery.
Flash in present philz Recovery the "cwm 6.0.4.7".
Then use this Recovery to flash latest cm11 + gapps + twrp 3
Sent from my ME173X using XDA-Developers mobile app
---------- Post added at 09:54 PM ---------- Previous post was at 08:56 PM ----------
@bikclaude
The file name is: philz_touch_6.48.4-i9100.zip
Sent from my GT-I9100 using XDA-Developers mobile app
TriboDoP said:
Hi
cm11 should not make any trouble at all.
I do not know why this message turned up.
Please tell me what exact Recovery you used for flashing (e.g. philz cwm 6.0.4.7) and which cm 11 you flashed.
Maybe the Recovery should be updated to latest.
Still I wish somebody would confirm that your korean converted device can be treated as an i9100.
Sent from my ME173X using XDA-Developers mobile app
---------- Post added at 08:56 PM ---------- Previous post was at 08:46 PM ----------
Hi again
Just did some searching and a reason for this error is as I supposed:
You have to update the Recovery.
Flash in present philz Recovery the "cwm 6.0.4.7".
Then use this Recovery to flash latest cm11 + gapps + twrp 3
Sent from my ME173X using XDA-Developers mobile app
---------- Post added at 09:54 PM ---------- Previous post was at 08:56 PM ----------
@bikclaude
The file name is: philz_touch_6.48.4-i9100.zip
Sent from my GT-I9100 using XDA-Developers mobile app
Click to expand...
Click to collapse
OK thanks,
please can you paste the philz_touch_6.48.4-i9100.zip link? i cannot find it
bikclaude said:
OK thanks,
please can you paste the philz_touch_6.48.4-i9100.zip link? i cannot find it
Click to expand...
Click to collapse
Put only the exact File name in Google search and you should find it in a second .....
Sent from my ME173X using XDA-Developers mobile app
hello!
thanks TriboDoP but i'm sorry i thing something went wrong for me. i have install philz_touch_6.48.4-i9100.zip as you said but after that my phone just brick. fortunately i have reinstalled it USING ODIN!!! (i had no choice and i desperately tried with odin and it worked). Now i have 2 questions: 1) why did i got a brick after installing philz_touch_6.48.4-i9100.zip??? 2) now that i see that i can flash using odin is there any safety alternative with ODIN to install android 4.4.2 or 5.1? any other suggestions will be appreciate.
really, thanks for your help. i really appreciate