Related
I thought the Slide would be a good phone to invest in, considering the first MyTouch was T-Mobile's top Android phone for the longest time. It has its share of accessories.
They dropped the ball on this one. There's absolutely NOTHING. At first I thought OK, maybe it's a little too early to be looking for Slide accessories. Then the "official" launch date came and went. Still nothing.
What have I bought so far? A micro fiber pouch (still a must, IMO).
What I really want is a decent desktop cradle or goose-neck car mount (I have a glass-top desk, so this would work wonderfully). Yeah, I realize eBay has about a zillion car mounts. They're MFing ugly though. I want something that doesn't stick out further than the front of the phone. Was thinking a magnetized suction mount: I'd adhere the magnet to a cheap silicone sleeve so I don't harm the phone. Oh wait, there ARE no silicone sleeves for this phone.
Argh.
Just checked out their official site for accessories. LOL a $30 plastic snap-on kickstand? No doubt similar to Chinese covers you can get on eBay for a few dollars. You have got to be kidding me.
Anyways, I think I'm going to just get an mGrip, as it's the least tacky looking suction mount, IMO. Anyone have one of these?
Either that or I'll get a magnetic mount/goose neck, and adhere it to a replacement battery cover, so I'm not affecting the phone's original battery cover. (Thought about adhering the magnet to one of those eBay-speshul snap-on covers, but I don't like that idea either, as snap-on can just as easily scratch the phone. Yes, I'm extremely anal about this.)
Sorry for the rant/babble... I thought maybe some of you might share my thought processes here.
Another update:
This looks promising. It's called the "In Your Face Viewbase" for iPhones, but it looks like it would fit nicely around the Touch.
http://www.youtube.com/watch?v=yjy-xmSwaa4
A bit overpriced at $30, but it looks pretty slick, and there are a few places I could clip this thing on or around my desk.
the official cases were pushed back, more will be available mid july, then fully rolled out by end of august.
I want the water bottle that comes with the arm strap, but not for $40.
I just received this from Amazon...
http://www.amazon.com/gp/product/B005PR3IC0/ref=oh_o00_s00_i00_details
not sure if i like it...it seams secure, but i had a problem with it on a bike ride today and i think im going to send it back...anyone have a good one that they recomend?
i thought about getting one for my bike also, but then for some reason i don't think i want my expensive phone getting crushed if i happen to fall over or hit something.
surprisingly that never went through my head with my iphone.
Trident offers a bike mount for their Kraken case, which should be released soon. I've used RAM mounts before, very very sturdy.
one028 said:
not sure if i like it...it seams secure, but i had a problem with it on a bike ride today and i think im going to send it back...anyone have a good one that they recomend?
Click to expand...
Click to collapse
I ride with my wifes old Aria in an Otterbox (REAL Otterbox) + standard 4 hole GPS mount motorcycle mount. It stays in place pretty well, but no way to interact with the phone, so I gotta leave the screen on, and the box isn't that clear, has some amount of frosting to it, although I haven't had any problems reading through it.
Plusses are it's waterproof and pretty bomb proof, so if I get caught in the rain or wreck, the phone should be safe. It'd really be nice to be able to interact with it though. I have to stop, pop the latches, open the lid...
The Note actually fits in it if I take off the phone case, but I don't think I'll be riding with it like that.
Anywho, if you want, I'll look up the exact things I got.
I don't think it's a good idea to mount a bike on the Note. It's not that big...
Sent from my SGH-I717R
khaytsus said:
I ride with my wifes old Aria in an Otterbox (REAL Otterbox) + standard 4 hole GPS mount motorcycle mount. It stays in place pretty well, but no way to interact with the phone, so I gotta leave the screen on, and the box isn't that clear, has some amount of frosting to it, although I haven't had any problems reading through it.
Anywho, if you want, I'll look up the exact things I got.
Click to expand...
Click to collapse
Do you have a link for the mount? (and the case)
Thanks
I got the Samsung Car Holder for the Note which holds it very securely . It seems to have the same ball connector. Maybe it would fit together with the handle holder instead of the Window thingy. Just a thought.
Sent from my GT-N7000 using xda premium
If you buy the trident kraken ams case there is a bike clip attatchment accessory you can buy seperately on the website! !
Sent from my SAMSUNG-SGH-I717 using xda premium
Those squeezable mounts suck. Sorry for your loss. I have used these, http://www.ebay.com/itm/Cycling-Bik...962477?pt=PDA_Accessories&hash=item3375756eed. From ebay, and Asia. But they have worked out. You can find different sellers for them.
uztnus said:
Do you have a link for the mount? (and the case)
Thanks
Click to expand...
Click to collapse
The note with a VERY THIN case will fit in this Otterbox. A normal silicon or TPU it wont' fit, or will just barely fit. And remember, you can't interact with the phone in the case! Although with a dremel, you could possibly have a pretty tough case that you could touch though, although it'd obviously be less bomb-proof and you'd have to do something for water resistance. As-is, it's almost bombproof and waterproof.
OtterBox 2000 Series WaterProof Case
http://www.amazon.com/OtterBox-2000-Series-WaterProof-Case/dp/B000EM2O2G
Arkon GN032-AMPS Bicycle and Motorcycle Mount with 4-AMPS Connection Compatible with RAM GPS Holders (Black)
http://www.amazon.com/Arkon-GN032-AMPS-Motorcycle-Connection-Compatible/dp/B003FMUP14
To attach I just templated the holes on the case with the mount, drilled. To maintain water resistance, I put a piece of an old intertube between the mount and the case, just a bit of silicone, and screwed down tight. I've dunked it in in the sink, nothing. The screws on the inside I put duct tape over just in case anything rubs, but I put together a piece of cut-up foam in there to secure the Aria I normally use in the case.
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
omniphil said:
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
I am using the infiniapps magnetic mount. It works great! Ofcourse, it depends on if your phone is naked, in a bumper, or in a case. I'm currently using the incipio feather case and have stuck the metal plates to the case itself (not my phone). and It holds really well. With the infiniapps mount, you'll only get one adhesive plate so I bought an additional one as well. See pictures for how I've attached the plates. I'll upload a picture of the phone mounted tomorrow.
infiniapps mount - i bought it on sale for $19.99
http://www.amazon.com/InfiniApps-Sm...TF8&qid=1381339071&sr=8-1&keywords=infiniapps
Additional metal plates
http://www.amazon.com/iMagnet-Rectangular-Metal-Adhesive-Mount/dp/B00BSAD7ZQ/ref=pd_sim_cps_1
Here are pics
Sent from my C6833 using xda app-developers app
So you have to put a plate on front and back of your case?
I don't use a case currently. I'm assuming I could just stick one of these pads to the back of the phone?
Are they really secure going over big bumps and stuff like that?
Yeah I put plates on the case because I didn't want to stick anything to the phone. It would obviously be lighter without a case, and thus hold better if you stuck it to the phone. It's been really secure over bumps and at high speeds. Held perfectly during a 7 hr drive last week.
I am using this one.
http://www.ebay.de/itm/281172219396?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
It's the only customfit car holder for the Ultra I could find. When in the car I remove my Ultra from the Nillkin case and put it in the holder. I use it for navigation quite a lot and I hate it when the phone is loose in the car holder which is the case with most universal clamp style holders.
I have the InfiniApps Slyde CD Slot Mount also. Best phone mount ever. CD players are usually in the best location for viewing. I had cup, dash mounts, they were terrible. I used the sticky metal plate and attached it to the back of a case. Also magnetic attachment makes for quick removal of the phone when you want to check a message etc...
omniphil said:
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
Hi can you post some pics of it...???
This is the one I got. Worked pretty good until the Z Ultra..
http://www.mountek.com/dp/B004G1L52Q
Cool these look good. Just found another one which is cheaper than the others $12.99 + $2.99 delivery. Looks like it does the same thing and will also fit the Z Ultra (checked the dimensions). Link
Is there any risk that the CD slot ones will damage the CD player? Is the slot strong enough to handle the weight of the Xperia Z Ultra?
I've been using PuGoo sticky pads for a good year or two now to mount whatever smartphone I'm using. It's very handy.
http://www.amazon.com/gp/product/B00F68G58M/ref=olp_product_details?ie=UTF8&me=&seller=
You do need a good spot for it though, which luckily my xB has.
omniphil said:
...., but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
I had same problem with those centered power/volume button and I found this -epay #251340401428-, look at seller's other items there are few kinds of mounting type for X ZU. I bought one and still waiting for the parcel so cannot review yet.
abuihsan said:
I had same problem with those centered power/volume button and I found this -epay #251340401428-, look at seller's other items there are few kinds of mounting type for X ZU. I bought one and still waiting for the parcel so cannot review yet.
Click to expand...
Click to collapse
I already have this car holder and it works fine. It keeps the phone firmly in place and it is easy to put in and take out.
cholepuree1 said:
I am using the infiniapps magnetic mount. It works great! Ofcourse, it depends on if your phone is naked, in a bumper, or in a case. I'm currently using the incipio feather case and have stuck the metal plates to the case itself (not my phone). and It holds really well. With the infiniapps mount, you'll only get one adhesive plate so I bought an additional one as well. See pictures for how I've attached the plates. I'll upload a picture of the phone mounted tomorrow.
infiniapps mount - i bought it on sale for $19.99
http://www.amazon.com/InfiniApps-Sm...TF8&qid=1381339071&sr=8-1&keywords=infiniapps
Additional metal plates
http://www.amazon.com/iMagnet-Rectangular-Metal-Adhesive-Mount/dp/B00BSAD7ZQ/ref=pd_sim_cps_1
Click to expand...
Click to collapse
Does it stay in place while driving and when hitting potholes or bumps?
It does hold very strong, I just got one of these. I hate cases on my phone but I put one on so I could attach the metal plate to the inside of the case. It has never fallen off on even the biggest bumps.
I am still deciding if I want to just stick the plate to the back of my phone... I wonder how easy it is to get the adhesive off the back glass if I ever wanted to remove it...
Yes is holds really well. Just had a 6hr drive this morning!
Edit: Here is a picture of how it looks while driving.
Sent from my C6833 using xda app-developers app
Just wanted to say that I just bought this:
Scosche stuckUP
Its early to tell but the quality feels solid compared to the many ebay cheapo one that end up breaking in no time.
The whole things just feel quality..and for the price it better! lol
Several ways to use it...I went with Windshield for now. Holds the phone very tightly and during the trip its very stable.
Also, I did not even have to remove the flip case I have which makes it seem a lot bulkier so I feel it will do great with either the CP12 or any of those battery/case combinations.
Happy to finally have my phone up there even if it blocks most of my view! LOL
I have come to the conclusion that a universal mount for a small tablet is the ideal car mount, so I have been looking at ebay for ones designed for the Nexus 7, Memopad 7 and Samsung Tab 7, and then checking that they can be adjusted small enough for the XZU.
this one in particular looks appropriate:
http://www.ebay.co.uk/itm/160672229905?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
it's a little bit more expensive than I'd expect for a simple product, but I've not seen a similar unit.
The one I bought above works excellent, it is for phones but depends on what you like.
I am very happy with the quality compared to all the crap I bought before lol
I have one of the Imagnet mounts in my F350 I used with another phone. I checked the Z Ultra and it sticks to it without needing the metal plate attached to the back of the phone. Right under the camera area inside the phone is enough metal that the magnet works fine. I have driven with it in that bouncy old truck and it does not come off or move around at all. The only bad thing is the metal is not centered so the phone only sits in portrait orientation. But it beats having to stick a metal plate to the back of the phone.
I like it because I am in and out a lot through the day and it is quick and easy to just toss the phone onto the magnet then just grab it off there when I need it. I have not tried it with a power cable attached but most likely it will just make it tilt over a bit depending on how much the power cable hangs down I guess. With the battery life of this phone it has not been something I have needed compared to the Mega 6.3 that would go dead much quicker streaming slacker radio over bluetooth than this beast of a phone. Most likely the charger cable would have to be supported in some way to keep it from making the phone lean to one side.
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
joebongo said:
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
Click to expand...
Click to collapse
Looks okay but I prefer the imagnet...
I love ProClip's holders. You select the custom mount for your car, and then the custom mount for you phone. I've owned several brands of custom clips throughout the years, and I've never been happier.
https://www.proclipusa.com/
Doug
After having tried several car mounts, I have come to a point where I do not want any snake-type car mount - the ones with extensible, adjustable arm ... with time, and car vibrations, they do not really stick in place, and dangle around a little bit.
Lately I happened to pick a glass screen cover from xtreme guard where they offered promotional Flozu car mount + a 90% discount coupon ... at the end, it was really a deal for the both of them..
I have been using the flozu mount since around 1 month now, very solid, top notch. secure suction locking mechanism, seems to hold much stronger to the windshield than my previous ones. The absense of the extensible arm made it VERY stable in terms of vibration and permanent "dangle" . It holds my note 3 firmly (not strongly) between its pliers, and manipulating the plier to open it is very easy - not complicated spring-loaded buttons to press - which get worse with time - which you see on other models. Seriously recommend.
Here is the link to the Flozu mount:
http://www.xtremeguard.com/product-p/car-mount-flozu.htm
mine came today (Flozu mount), fairly quick standard shipping delivery. I expect it'll do a very good job. At first I thought it was rather pricey ($49.99 USD) but then the 75% off discount code appeared -- can't find anything decent in the stores for $12.75! easy to mount to the windshield, nice firm grip of my unprotected S3 (countdown to upgrade: 3days). I'll update after having used it awhile.
Rick
I use mountek products. one of the most stable products to use by locking it in your cd slot or between the dash crevices. Great as some states may not allow suction cup mount on glass.
http://www.mountek.com/shop/
Airframe+
I use the Kenu Airframe+. Mounts in the vent and holds really well. Also works as a kick stand since it's small and you can carry it around with you with you're not in the car.
Best mounting system I've ever owned, but it's not cheap.
https://www.proclipusa.com/
Doug
I use this holder for my Note 3. Its been good for a year now and cheap.
Can twist it for landscape or portrait and can hold any phone as most of us use cases on our phones it will fit any phone... One problem is your car will need to have strong vents and not too deep directors inside as the back will need to grip onto those.
EBay number item number 311275702025 check can't post link as I'm a new member.
Masik v6.0 lollipop Note 3 N9005
I just bought my second one of these. Super sturdy and the suction cup has a gooey material on it that literally will stick to just about anything!
second this!
ickensai said:
I use mountek products. one of the most stable products to use by locking it in your cd slot or between the dash crevices. Great as some states may not allow suction cup mount on glass.
http://www.mountek.com/shop/
Click to expand...
Click to collapse
I've had this mount for around 2 years and I love it! 2 of my friends got it after they saw mine.
I hardly ever use my CD changer but it still functions normally if you do.
In my car it puts the phone in the perfect place. Here's a few pictures of it in my car so you know how it looks.
Hello
In the past I used only phone specific holders like proclip. Works fine but expensive. Now the kids want to use the car too so I changed to an universal holder.
Now I use http://www.rammount.com/part/RAM-HOL-UN7BU
Fits the s4 mini and my Note 3 too.
Besides the holder you'l need:
Ball base http://www.rammount.com/part/RAM-B-202U
Arm: http://www.rammount.com/part/RAM-B-201U-A (various lengths available).
Not cheap but you by it once.
joebongo said:
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
Click to expand...
Click to collapse
I got a simple silicon mat on ebay - sticks like glue to the dash and you can just slap the phone on it (gently) and it sticks even on bumpy roads. And if it gets dusty you can just wash it in water - works brilliantly and cost me about $5
Looks a little like these but the 'bumps' aren't so noticeable on mine.
ProClip
I've used ProClip mounts in two different trucks with three different phones. I wouldn't use anything else. You buy the mount in two pieces - one piece for the vehicle, that's specific to the vehicle, and where in the vehicle you want to mount the phone. It has tabs that insert into the existing seams of your car's interior. No drilling, no bolts to unscrew, a very clean installation. The other piece you buy for the phone (or tablet, or GPS unit). They have many phone mounts each designed to fit a specific phone - as long as you don't have a case on it. They also have phone mounts that are more universal in nature for those that use a case. Any of the phone mounts will attach to any of the vehicle mounts.
It's expensive - each piece has cost me between $35 and $40, so around $75 when you first buy the system. But if you get a new phone, you only have to replace the phone mount. If you get a new car, you only have to replace the vehicle mount.
It's a premium mount. It holds your phone firmly in place, and it's a clean , professional looking installation. I think it's worth the cost.
For my Note 3, I've been using the Exogear ExoMount Touch -http://www.exogear.com/products-exomount-touch-one-touch-car-mount-holder.html . The reusable adhesive pad works surprisingly well and it is a cinch putting in and taking out my Note 3, even in my Urban Armor Gear case. Simply put the phone into the mount and the arms snap close around the device, and to remove I just press the release buttons. Easy in, easy out.
The one issue I had was one one occasion the tightening nut cracking, but I think that was as a result of me carelessly over-tightening on one occasion. The company quickly sent me a free replacement, however.
Journyman16 said:
I got a simple silicon mat on ebay - sticks like glue to the dash and you can just slap the phone on it (gently) and it sticks even on bumpy roads. And if it gets dusty you can just wash it in water - works brilliantly and cost me about $5
Looks a little like these but the 'bumps' aren't so noticeable on mine.
Click to expand...
Click to collapse
Had this kind of things, but last summer, they melted, and left mark on dashboard :/ couldn't clean, now you can see it, so beware of the heat/sun
Ps2004 said:
Had this kind of things, but last summer, they melted, and left mark on dashboard :/ couldn't clean, now you can see it, so beware of the heat/sun
Click to expand...
Click to collapse
Not sure where you are, but mine's been through some pretty hot days with the car parked in the sun and no problems. Silicon shouldn't melt - it melts around 1400ºC - if your car is getting that hot you'd have to be approaching the Sun I think. Maybe yours was plastic?
Just check my history on dx.com, and yes, it seems you were right, it was PVC, must say I didn't check that as it said made for car dashboard.
Anyway, just be careful what you buy.
Oeps said:
Hello
In the past I used only phone specific holders like proclip. Works fine but expensive. Now the kids want to use the car too so I changed to an universal holder.
Now I use http://www.rammount.com/part/RAM-HOL-UN7BU
Fits the s4 mini and my Note 3 too.
Besides the holder you'l need:
Ball base http://www.rammount.com/part/RAM-B-202U
Arm: http://www.rammount.com/part/RAM-B-201U-A (various lengths available).
Not cheap but you by it once.
Click to expand...
Click to collapse
I second the RAM mounts. I use the cupholder version, then the ball arm, and the X clip. I can even swap out the attachment with my medium/large RAM holder that fits a nexus 7, or my large holder that fits an ipad air. Ram mounts aren't cheap, but they're versatile and built to last. I'll never need to buy another mount system again, unless I find a really oddball device in the future and need a new attachment for the Ram.
I finally found the perfect mount for my taste. Universal + with charge function.
http://www.1a-pc-shop.de/shop/hr-30417-universal-smartphone-charging-dock.html
You cand adjust the x and the z axis of the power connector holder at the bottom. There are 5 adapters included for different cables. Works very well with my usb 3.0 car charger. Silicon case no problem.
Now I just slide in the Note 3 and it charges. And this should work for many devices to come.
As the title suggests, can anyone recommend a decent in car cradle/holder for the S7?
Thanks in advance
Sent from my SM-G930F using Tapatalk
For the life of me I can't find the brand name but it expands in the cup holder has a flexible gooseneck and a holder that tilts at different angles. It is adjustable for most phones width. I found it on eBay a long time ago
YesEvil said:
As the title suggests, can anyone recommend a decent in car cradle/holder for the S7?
Thanks in advance
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
With my Note 4, I very happily used iMagnet. With my S7, it didn't occur to me that it doesn't go so well aesthetically with a clear-backed case like the Otterbox Symmetry Clear. I'll probably get an inexpensive case to keep and use in the car.
I use the I Magnet mount. Been using it for a few years in a few different vehicles. The only time I ever had a phone come off the mount was the day I hit a deer doing 65 and totaled my car. Thankfully the phone wasn't damaged. The biggest downside is if you use the adhesive to stick the metal plate to either your phone or a case then it's more or less not reusable on another phone or case. Glad I saw this thread as I just realized I needed to order more steel plates. These steel plates will interfere with NFC and wireless charging. So I end up either just putting a steel plate loosely between the phone and case and then take it out when I'm done. Another option is to have two cases. Mount a steel plate inside your second case and just switch cases as needed.
Corwinder said:
I use the I Magnet mount. Been using it for a few years in a few different vehicles. The only time I ever had a phone come off the mount was the day I hit a deer doing 65 and totaled my car. Thankfully the phone wasn't damaged. The biggest downside is if you use the adhesive to stick the metal plate to either your phone or a case then it's more or less not reusable on another phone or case. Glad I saw this thread as I just realized I needed to order more steel plates. These steel plates will interfere with NFC and wireless charging. So I end up either just putting a steel plate loosely between the phone and case and then take it out when I'm done. Another option is to have two cases. Mount a steel plate inside your second case and just switch cases as needed.
Click to expand...
Click to collapse
I tried just putting a plate between the S7 and my Otterbox Symmetry case. It wouldn't stay in place, making too scared to try driving with it.
RebDovid said:
I tried just putting a plate between the S7 and my Otterbox Symmetry case. It wouldn't stay in place, making too scared to try driving with it.
Click to expand...
Click to collapse
That's when you bite the bullet and remove the paper backing covering the adhesive and make it stick in place. To tell you the truth, I've never done that either. I've always used the adhesive thus my need to order more steel plates today.
YesEvil said:
As the title suggests, can anyone recommend a decent in car cradle/holder for the S7?
Thanks in advance
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
It would help if you would specify what function would you like it to serve....ie (wireless charging, magnetic, windshield mount, CD mount, vent mount (etc), one handed operation....
I use mine as a phone holder and dash cam. Wireless charging in the car is not important to me right now. Here is the combo that I currently use and it works well...
http://www.amazon.com/Mobie-Grips-M...&redirect=true&ref_=oh_aui_detailpage_o08_s00
http://www.amazon.com/Universal-Qun...&redirect=true&ref_=oh_aui_detailpage_o07_s00
http://www.amazon.com/TomTom-GPS-Da...&redirect=true&ref_=oh_aui_detailpage_o09_s00
I use the base from the second link with the actual phone holder from the first link (universal ball joint) and have it suction cupped to to the item in the third link. It sits perfectly on my dash and works very well in my vehicle. It is secure, easy to put the phone in and out of, and provides me with easy access to the phone as well as all of the functions I wanted to accomplish with it.
Of course, you can just keep it simple and use the item in the first link and just suction cup it to the windshield...that's up to your needs and vehicle.