first i tried to unlock bootloader it showed me failed in pc!
but when the phone booted the bootloader was unlocked and it showed unlocked too in fastboot!
i tried to install recovery it worked fine!
then i took a backup ,clean wiped and installed resurrection remix but it went in a loop!
then i tried cm12 build april 7 that too went in a loop!
after that when i restored nand backup it worked fine!
So where am i wrong?!
i
are you on 4.4.4 or 5.0.2?? I mean did you update your rom to soak test lollipop using zip file??
If you try to install 5.x roms over 4.4.4 stock rom you will likely to get loop
try installing cm11 stable version first then install cm12 over it
It's the same on Moto G (2014), to flash 5.x.x ROMs, you'll need the lollipop bootloader... if you have a 4.4.4 bootloader, you will get bootloop.
If you update to soak test, your bootloader will be updated.
Related
I just got a GPAD for my wife. It is the v500 version.
I rooted and installed the latest cyanogenmod. I had the 4.2.2 stock ROM on before.
I had TWRP 2.6.3.2 installed to get CM11 on it. Everything was fine with CM11 but wanted to put LRS 2.5 on it.
I downloaded LRS 2.5. I also had the 4.2.2 and 4.4.2 base files on the internal memory. For some reason, I thought I needed to install the 4.4.2 base files after I wiped everything before I installed LRS 2.5. Well, it INSTALLED TWRP 2.7.0.0 with the 4.4.2 base files and sent my phone into a recovery bootloop. When it goes into recovery, it starts installing some script automatically and keeps rebooting itself.
Right now, it is stuck on a dimmed out version of the LG logo. I can't do anything but reboot it into the TWRP but I can't do anything. It just keeps rebooting itself.
What can I do. Please someone help.
Thank you so very much.
luv2increase said:
I just got a GPAD for my wife. It is the v500 version.
I rooted and installed the latest cyanogenmod. I had the 4.2.2 stock ROM on before.
I had TWRP 2.6.3.2 installed to get CM11 on it. Everything was fine with CM11 but wanted to put LRS 2.5 on it.
I downloaded LRS 2.5. I also had the 4.2.2 and 4.4.2 base files on the internal memory. For some reason, I thought I needed to install the 4.4.2 base files after I wiped everything before I installed LRS 2.5. Well, it INSTALLED TWRP 2.7.0.0 with the 4.4.2 base files and sent my phone into a recovery bootloop. When it goes into recovery, it starts installing some script automatically and keeps rebooting itself.
Right now, it is stuck on a dimmed out version of the LG logo. I can't do anything but reboot it into the TWRP but I can't do anything. It just keeps rebooting itself.
What can I do. Please someone help.
Thank you so very much.
Click to expand...
Click to collapse
Please move your question to the q&a thread.
I don't know how. Maybe a nod could help me. Sorry
Go download mod and use lg firmwire tools for reinstall 4.4.2
hi ..i have a Moto E XT1022 Dual Sim Indian Phone(4.4.4 Kitkat STOCK)
REcently I had unlocked and even rooted my phone by Flashing CWM 6.0.5.0 and Super User 2.46
Later when i tried flashing 5.1 Lollipop! Tried Blisspop then Minimal OS
It seems to Bootloop
I mean that it Stays in Boot Animation and when i press power off it reboots automatically
can some one tell me where i went wrong?OR what i can do to Come out of this Mess!?
POOSIBLE ERRORS I FEEL:
1.)Not installed SDK
2.)not installed Busy Box
benishere said:
hi ..i have a Moto E XT1022 Dual Sim Indian Phone(4.4.4 Kitkat STOCK)
REcently I had unlocked and even rooted my phone by Flashing CWM 6.0.5.0 and Super User 2.46
Later when i tried flashing 5.1 Lollipop! Tried Blisspop then Minimal OS
It seems to Bootloop
I mean that it Stays in Boot Animation and when i press power off it reboots automatically
can some one tell me where i went wrong?OR what i can do to Come out of this Mess!?
POOSIBLE ERRORS I FEEL:
1.)Not installed SDK
2.)not installed Busy Box
Click to expand...
Click to collapse
Well by I know you can't install a Lollipop rom using kitkat on motorola..try flash cm11 or some based rom on KitKat and see if it works Or update your device to soak before change the rom to some lollipop/cm12(.1) based rom.
Hey folks,
I have a problem with my SPG621.
I used to have CM 12.1 on it. I rooted it and installed it via Dual Recovery.
I wanted to update to another Nightly but I got stuck in bootloop. I resolved this by flashing back to 5.0.2 to root it again with King Root.
I acquired root again and wanted to install Dual Recovery again and there is the problem:
No matter what I do, the tablet won't EVER boot into recovery. It just doesn't. I tried to flash a recovery via fastboot to it, and it says success but it won't boot into recovery.
Can anybody help, I would like to have CM12.1 on it again.
King root is BS
I suggest you root kitkat
Sent from my C5502 using Tapatalk
But what does this have to do with the recovery?
I could solve the problem.
I flashed Android 4.4.4 to it, rooted it again with KingRoot and managed to finally get XZDualRecovery on it. Just strange that it did not work with 5.0.2 (it worked before...).
After wiping my device via TWRP I could install the altest CM12.1 nightly. Thanks a lot.
im having very weird boot loops, which i think is because of full wipes, i couldnt install carhd rom, with full wipe and without..but with crisscross it only works without full wipe. if i fullwiped and installed crisscross, i get stuck in a boot loop...
does anyone have any idea? these are my first roms btw.
Have you updated your bootloader and modem to MM?
Also have you installed TWRP v3.x.x.x (arter has custom recovery for F and I variants).
I'd suggest you do the MM update through odin
Valkiry said:
Have you updated your bootloader and modem to MM?
Also have you installed TWRP v3.x.x.x (arter has custom recovery for F and I variants).
I'd suggest you do the MM update through odin
Click to expand...
Click to collapse
i flashed by being on stock MM, do i still need to flash the bootloaded and modem to MM? im already using the arter TWRP
I'm confused on a few things,
I once had Cyanogenmod with Marshmellow, after updating to an OTA Cyanogen version I got stuck into bootloop and for some reason I couldn't get back to Cyanogenmod in TWRP recovery and the only nandroid backup was B331 which is only Lollipop Stock which i'm currently on. Now I just want to start from scratch and get back to latest Cyanogenmod with Marshmellow. Where do I start? I have Current Build KIW-L24C567B331 that is currently Lollipop and I wiped my internal SD. When I try and look for Stock OTA updates it says no updates, the update client has NEVER worked on this phone. I have currently TWRP recovery on it. Do I have to go to a certain build to get back to Marshmellow? then go to Marshmellow Stock then to Cyanogenmod?
I tried following this guide: http://forum.xda-developers.com/honor-5x/how-to/guide-kiw-l24-to-stock-t3318268 but I don't understand which stock I should go to and the instructions aren't very clear (maybe i'm just dumb)
Another question: for each Custom ROM I install do I go back to a certain stock build then flash the custom ROM?
Much help appreciated,
Thanks
Are you in stock Marshmallow before you flashed CM?
Sent from my honor 5X using XDA Labs
if you are saying that you have twrp, with lollipop emui on, due to twrp, you will never get any update,
since you want marshmallow, i think you need to be upgraded to marshmallow firmware,
to do so, you need to download the marshmallow build, generally the b331 firmware in the link you provided...(dated:10/07/2016)
go ahead and download that firmware and follow the procedure, in the end, you will be left with the marshmallow emui build with stock recovery on (eligible for ota and warranty )...
now, since your bootloader is still unlocked(i guess), you can reboot to bootloader and fastboot twrp recovery(latest twrp is recomended)..
and now, you are pretty much good to go.... download latest cm13 nightly and install... enjoy
please do perform the steps carefully:good:
AND NO, YOU DO NOT NEED TO GO BACK TO A STOCK BUILD TO FLASH CERTAIN CUSTOM ROMS