How to do that ? Is it easy to be done .. ? Will it cost much if i send it to be replaced ?
I watched a few videos replacing that lens for samsung galaxy s5 or sth like that..
Anyways please help
because of that..it's my only reason why I have a small case on the backsite... now the glass is saved..
Related
hi
i bought a brand new digitizer but i cant figure out how to remove old one and fit new one ... service manual doesnt help either ! any ideas ? thanks
http://www.vimeo.com/7623264
This is a good video - if you have got the courage....
r
Andrew
ooo i love this video man .... when he sneezed ( 18:38 ) it just cracked me up . thx for the link ill keep watching it .
..if you want my opinion from having inspected the part...but i never tried...
....etciouuum!
http://forum.xda-developers.com/showthread.php?t=462102&page=15
Good luck as whn replacing the digitizer you will most likley break the LCD.
Where I work we have recently begun replacing digitisers on a number of HTC models, the Blackstone has a good success rate on average, we break the lcd in a few cases, the blackstone and diamond are the most difficult to replace sucessfully, we have found that carefully heating the digitiser helps to soften the double-sided adhesive tape used to stick the digitiser to the frame, and carefully using a thin blade, such as a scalpel or razor blade to separate them.
However it is a difficult process, and the risk of damage is quite high without specialist jigs and tools.
Good luck, and take it slowly and carefully.
...I insist
My opinion (i have replaced the screen successfully and I am familiar with transfer adhesives): if you are not a professional, don't replace the digitzer only but get a pre-assembled LCD+digitizer. it looks more expensive at the beginning, but at the end you'll save money AND time...
Hi. i just make this mistake, first i buy only digitaizer, i start change i broke the lcd, after i order the lcd only. i start fix together, everything ok, buth the digitaizer dont working. i conect everythink, 4 times i check and nothing, wath is the problem. i read manuals wath movies, and i dint find answer for my problem.
Please help.
yeh after getting the lcd and digi away from frame i made the mistake of peeling the digi off and finding out its got double sided sticky tape which will never look the same unless new sticky is aplied which i dont think we can do, so i bit the bullet and ordereed a pre asemmbled lcd and digi for £54
Any ideas how to glue preassembled lcd+digi to new housing? No sticky tape there.. maybe a link where can i buy such a thin tape.. cant find it in local stores
Hi guys,
My glass front is a little bit damaged and now I found this on Ebay: http://cgi.ebay.nl/HTC-Touch-HD-T82...iewItemQQptZHandy_Zubehör?hash=item3a541a435b
Does anyone have experience in installing this thing. Or even to remove the old glass front, because I have now idea how I should that either without wrecking the device...
Please advise... Thx!
Check http://mikechannon.net/PDF Manuals/HTC_Blackstone_Service_Manual.pdf for instructions on disassembly/reassembly.
Glass replacement.
Here is the whole story.
http://forum.xda-developers.com/showthread.php?t=462102
Hi. I have a problem with a minor crack on the front glass near the "go back" button. (I've marked it with red line on this picture: http://i51.tinypic.com/10rpybl.jpg )
So my question is what is the cheapest way to fix it? I have been thinking about SGP Glass but I don't like how it looks, however if there is no option to replace just a front glass, I will consider it.
i have the same question,
Is it passable to separate outer glass and LCD ?
on ebay you can find only glass, no connectors, that means it should be passable to separate them, does anyone tried to do so?
I would like to know that also. Anybody has experience with that?
it is possible, i have the same problem...but ideally you should use a special tool to seperate the digitiser (the actual touchscreen bit) from the glass.
and you'll risk breaking your working touchscreen if it goes wrong..
if the screen functions and the crack isn't that big...and if you can't afford to go the whole way and replace the lot....i wouldn't bother (i'm not and i have a huge spider like crack all over my phone.)
I dont think so. Mostly the Touscreen is bound to the Display.
Watch this Video around 2:45. You will see that he nearly destroyes the glass.
watch?v=k6Y6an6D2P | sry can post any Urls yet
But i cant also explain to myself why there are only "glass" sold on ebay
Glass Frame
hi everyone
to answer all your questions YES its possible but in-order to do so you'll have install a copy of the original glass which comes in full meaning the other half the your phone
this has happened to me, my phone slipped from my hand and fall to the floor the glass was shattered so i went to my friend a mobile phone reaper man and got the glass changed only and its was not that bad although there was no samsung logo i chose to install a glass copy because the price of the original is almost half the price of a new I9100
i hope this helps
iMatrix
imatrix83 said:
hi everyone
to answer all your questions YES its possible but in-order to do so you'll have install a copy of the original glass which comes in full meaning the other half the your phone
this has happened to me, my phone slipped from my hand and fall to the floor the glass was shattered so i went to my friend a mobile phone reaper man and got the glass changed only and its was not that bad although there was no samsung logo i chose to install a glass copy because the price of the original is almost half the price of a new I9100
i hope this helps
iMatrix
Click to expand...
Click to collapse
That is exactly what I need to do.... Replace the glass only! I already have the glass but need to figure out how to replace it without damaging the digitizer.
Maybe your friend can help?
The whole glass/digitizer is very expensive!
Please help!
clazaro69 said:
That is exactly what I need to do.... Replace the glass only! I already have the glass but need to figure out how to replace it without damaging the digitizer.
Maybe your friend can help?
The whole glass/digitizer is very expensive!
Please help!
Click to expand...
Click to collapse
This could affect the touch sensitivity badly. If the repair is too pricy for you, use a screen protector so you won't get cuts and save money for repair.
Sent from my digital submersible hovercraft.
Hey everyone. I dropped my phone today......my brand new phone :'(
Screen fractured on the top, but the phone still works, touch screen is in tact, all functions still work like normal.
Question:
What do I need to buy now to replace the damaged screen, because I don't LIKE it!
I see that people are selling the outer glass screen lens like this, for $20ish
http://www.ebay.com/itm/U-For-Samsu...ltDomain_0&hash=item4d0314f1ff#ht_3326wt_1159
and then people are selling complete LCD with Digitizer (whatever that is) for $225
http://www.ebay.com/itm/Brand-New-F...276?pt=LH_DefaultDomain_0&hash=item35be08ef4c
The phone is working fine...it's just the glass. Which one do I have to get?
Thanks so much!
Cupuffy said:
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Click to expand...
Click to collapse
melemed said:
Hey everyone. I dropped my phone today......my brand new phone :'(
Screen fractured on the top, but the phone still works, touch screen is in tact, all functions still work like normal.
Question:
What do I need to buy now to replace the damaged screen, because I don't LIKE it!
I see that people are selling the outer glass screen lens like this, for $20ish
http://www.ebay.com/itm/U-For-Samsu...ltDomain_0&hash=item4d0314f1ff#ht_3326wt_1159
and then people are selling complete LCD with Digitizer (whatever that is) for $225
http://www.ebay.com/itm/Brand-New-F...276?pt=LH_DefaultDomain_0&hash=item35be08ef4c
The phone is working fine...it's just the glass. Which one do I have to get?
Thanks so much!
Click to expand...
Click to collapse
Bommer...
Don't buy the glass alone its glued to the digitizer. So u need to spent the 225$,on YouTube there is a great guide to assembly and reassembly galaxy s3
zodiaxe66 said:
Bommer...
Don't buy the glass alone its glued to the digitizer. So u need to spent the 225$,on YouTube there is a great guide to assembly and reassembly galaxy s3
Click to expand...
Click to collapse
If the glass is glued to the digitizer, then why would so many people be selling the glass alone without the digitizer if there wasn't any use for it?
Hi.
Accidentally dropped my s3 i9300 ( ofcaurse at day when i don't had lifeproof on in ) and front screen has a one crack from top to the bottom.
Im ok with replace it by self together with video from xda user http://goo.gl/120AwW
This was created in 2012. I wont to ask you noob questions:
1. Is this the best way to replace it?
2 . Do i have to replace digitize or only front glass ?
3. Which glass/screen is the best to buy as replacement ? ( is possible to buy better then original - like for s4 or better ? )
Thank You for any help.
I found this thing. http://goo.gl/JNKlqc Is that what i need ?
bitpie said:
I found this thing. http://goo.gl/JNKlqc Is that what i need ?
Click to expand...
Click to collapse
Yes but u ve to be very careful when u remove your broken screen. Make sure you get the screen hot enough without frying yr lcd. What u are replacing is only the glass, the digitizer is a film glued on the lcd.careful not to lift it up when remmoving yr glass also be careful of the flex cable for menu and back button. Never start from bottom. One thing for sure yr phone will be the same again as the original does not have a gap between the glass and the lcd it is filled with glue.Its better to buy the complete assembly from aliexpress cost abt $90US. Cheers
ndmuni said:
Yes but u ve to be very careful when u remove your broken screen. Make sure you get the screen hot enough without frying yr lcd. What u are replacing is only the glass, the digitizer is a film glued on the lcd.careful not to lift it up when remmoving yr glass also be careful of the flex cable for menu and back button. Never start from bottom. One thing for sure yr phone will be the same again as the original does not have a gap between the glass and the lcd it is filled with glue.Its better to buy the complete assembly from aliexpress cost abt $90US. Cheers
Click to expand...
Click to collapse
Do you mean something like this http://goo.gl/2VLuJr ?
bitpie said:
Do you mean something like this http://goo.gl/2VLuJr ?
Click to expand...
Click to collapse
Yes you will be better off.