Completely by accident I flashed the TWRP recovery for G9250, instead of my phone version G925F.
Now on every reboot, it loads up the TWRP screen, which is in chinese and I cant use any of the onscreen buttons.
Any help would be great.
Fixed it! Had to reboot into Odin, then flash a recovery using the ODIN tool.
@techenthusiast
oh ok, fixed already. Was about to mention that trick only.
Related
I've read a couple other posts were people have had a similar problem... So I'm just starting this thread for FYI..
When I downloaded and flashed the latest TWRP2 my phone would no longer boot or enter recovery... The phone would simply bootloop. I was lucky enough that I could get the phone into download mode and I was able to ODIN a previous version of TWRP...specifically 2.4.4.0 and then the phone booted again and recovery worked. I've also seen issues with TWRP 2.4.3.0 and some ROM installs which go to black screen during install....forced to hold power to reboot phone and then rom boots...
So if you get the bootloop after installing the latest TWRP, simply use ODIN 3.7 and grab a tar file of either CWM or older TWRP and install to fix.
Cheers
had the same issue.
Well, I'm not seeing a recovery.log so they can have actual information on what's wrong. I'll be doing that today at work.
I cant get anything above 2.4.1.0 to work for me....g
bhaskell said:
I've read a couple other posts were people have had a similar problem... So I'm just starting this thread for FYI..
When I downloaded and flashed the latest TWRP2 my phone would no longer boot or enter recovery... The phone would simply bootloop. I was lucky enough that I could get the phone into download mode and I was able to ODIN a previous version of TWRP...specifically 2.4.4.0 and then the phone booted again and recovery worked. I've also seen issues with TWRP 2.4.3.0 and some ROM installs which go to black screen during install....forced to hold power to reboot phone and then rom boots...
So if you get the bootloop after installing the latest TWRP, simply use ODIN 3.7 and grab a tar file of either CWM or older TWRP and install to fix.
Cheers
Click to expand...
Click to collapse
Same issue here. had to revert to 2.4.4.0
I've been trying to find an answer on this forum and on google but I cannot find anyone with a problem similar to mine.
All of a sudden after trying to update CWM, (failed), I cannot go into recovery anymore.
I know the button combinations and have previously done it before but now it just vibrates and displays the Samsung logo.
If I try and use an app to boot into recovery mode it soft bricks the phone I believe (does not boot and I have to get it into download mode to
flash the system.img).
Does this mean that I have no recovery?
Yes. It means you have no recovery. I would suggest flashing TWRP with Odin.
Sent from my SGH-I717D using xda premium
I tried to flash TWRP using Odin but after the Check status, Odin is crashing and force closes. I tried installing CWM but the progress bar seems like it is stuck on 0%.
I'm not quite sure how to fix this. I am trying to install CM10 but this is the first android I have had.
It's rooted but everything is stock. I am not sure if I need a custom kernel also.
Is your phone a Canadian version? There's an extra step needed when you flash a custom recovery.
It's just an American version
try this and flash cwm-touch-i717-120414.tar.md5 with odin if twrp does not work, then download the updated zip from twrp and flash that via recovery. unless u just want to keep cwm touch.
ODIN + CWM Touch or TWRP
Hey guys -
I'm having trouble getting CWM Recovery to work with my YP-G70. I've rooted, installed ROM Manager, wiped data and partitions, installed Odin, Used Odin to (supposedly) flash the DD_01142012.tar recovery to the device. Everything looks successful, but when booting back up ROM manager only gives me the option to go to "recovery setup" instead of the normal flash option. Even when I reboot it in recovery, it just goes to the standard android recovery screen. Any ideas on how to fix this? It may be painfully obvious, this is my first root.
Hydraulix_93 said:
Hey guys -
I'm having trouble getting CWM Recovery to work with my YP-G70. I've rooted, installed ROM Manager, wiped data and partitions, installed Odin, Used Odin to (supposedly) flash the DD_01142012.tar recovery to the device. Everything looks successful, but when booting back up ROM manager only gives me the option to go to "recovery setup" instead of the normal flash option. Even when I reboot it in recovery, it just goes to the standard android recovery screen. Any ideas on how to fix this? It may be painfully obvious, this is my first root.
Click to expand...
Click to collapse
Rom Manager does not work for this device ( I think ) and you should not use it. "DD_01142012.tar" is not just a recovery, it's the kernel too. They are integrated. Flash it again and hold power and vol-up during boot up to get to recovery then flash your rom...
So I'd been having some problems lately with my phone hanging on the Samsung screen on boot. Been running CM11 1/1/2014 nightly most recently. Decided to try using TWRP instead of CWM. That didn't seem to help my issue, so I tried installing CWM again. I used an app called Recovery Tools to download the touch version of CWM. After it said it installed, I tried to boot into recovery and got the error "Unauthorized software found. Please contact Verizon." (paraphrased a little).
Doing some research it looks like that error typically comes up when the bootloader is locked. Now, obviously I had my bootloader unlocked (well, Loki'd) because I was running CM11. Any help fixing this? I'm able to bypass the warning screen on boot if I hold down vol up + power like I'm going into download mode, but then hit vol down to cancel to boot up the phone. Once booted everything is ok, but any reboot just brings that up again. Using ROM manager to flash CWM recovery seems to work ok and it says its installed, but same issue. So does trying to flash TWRP from Goo.
If I were to run this tool that I used to root and loki before (http://forum.xda-developers.com/showthread.php?t=2301720) to install a recovery, would I be able to get everything going again? I think that somehow the recovery I installed wasn't Loki'd, although I picked the right one for my device.
Thank you in advance for any replies.
The fix I found was by pure dumb luck. I ended up trying to flash a recovery with Odin. Odin failed but reboot back into the os. I then used the twrp manager app from the playstore (mainly because goomanager wasn't downloading the recovery at the time) to flash the latest twrp recovery and all was good. Even though Odin failed at flashing the recovery I still think it helped somehow. I haven't thought much about why but I might have to now.
Sent from my SCH-I545 using Tapatalk
You could probably try using ODIN to get back to stock MDK and then Re-Root and install a recovery after.
Edit: And then flash CM11 again.
Sent from my SCH-I545 using Tapatalk
Will this one-click stock ROM work?
http://www.rwilco12.com/downloads.p... S4 (Verizon) (SCH-I545)/Stock ROMs/One-Click
or, which of the files on this page are what I would want? (about 1/3 of the way down for SCH-I545)
http://www.droidviews.com/how-to-install-latest-official-firmware-on-samsung-galaxy-s4-all-models/
I was actually able to reflash TWRP w/ their app from the Play Store. Still get a lot of boot hangs on the Samsung logo though. Seemed to happen less with CWM, but now I'm too scared to try to install a different recovery. I appreciate all your help guys.
So recently i tried to update my twrp recovery and i used goomanager on my phone and i think i used the wrong file because after that file was flashed i can no longer get into recovery mode. Every time i get in to recovery mode it show in the top left recovery mode and then goes into a bootloop and repeats that even taking the battery out cant fix this because when you turn it on it does the same thing...i fixed this by going into odin and flashing cwm recovery md5 file which i assumed would replace the recovery on my phone...but it didnt and i no longer go into recovery mode or flash roms. I would appreciate any help on this if I can fix this problem somehow or if there are other ways to flash roms...i have been looking for ways to flash roms using odin.....Thank You
lol does anyone know what to do?
aethlive said:
So recently i tried to update my twrp recovery and i used goomanager on my phone and i think i used the wrong file because after that file was flashed i can no longer get into recovery mode. Every time i get in to recovery mode it show in the top left recovery mode and then goes into a bootloop and repeats that even taking the battery out cant fix this because when you turn it on it does the same thing...i fixed this by going into odin and flashing cwm recovery md5 file which i assumed would replace the recovery on my phone...but it didnt and i no longer go into recovery mode or flash roms. I would appreciate any help on this if I can fix this problem somehow or if there are other ways to flash roms...i have been looking for ways to flash roms using odin.....Thank You
Click to expand...
Click to collapse
First mention your device name and ROM flashing methods differ with devices and you cannot flash any custom ROM with odin
just got same issue. note 3 sprint variant
i flashed twrp through odin and seems fine now.