Im having a bit of trouble finding a written guide on how to use rootjunkys tool for my watch i cant even get it to connnect to my pc
I cant do video guides i need something written
Can anyone help me?
sent from my pre-release littlebig monster
Related
think i hard bricked my optimus f6 after an attempt of installing unlocked bootloader. no emergency download mode, no boot of any kind. managed to get "qhsusb_dload drivers installed. do not know what to do???? any help please....
No one with any ideas about this situation ?
i'm stuck there too,i think there is a way with qpst tool but we need necessary .xml,.hex,.mbn files
That's a tough one. It's one of those situations that happens often enough, however, since not many people know how to fix something like this, most people don't even bother and just send it in to LG or write it off as a loss. The EASIEST way would be to find a shop with a RIFF box that can perform a JTAG service on that. But finding a shop that has the tool and knows how to use it (especially for your model) might be tricky depending on where you are. If you are wanting to try it yourself, you might try this thread as a reference point to maybe at least get you pointed in the right direction:
http://forum.cyanogenmod.com/topic/71825-hard-brick-to-hell-and-back-guide-to-recovery/
Obviously it is not for your phone, and the OP specifically says he does not know how to perform this on other phones, but it is the most detailed thread about it I could find. It should at least give the ideas to what kinds of files you need to find to get started. Good luck!
Hey
I need some serious help here and I'll be as detailed as possible.
So, here's my problem: I had custom ROM for my LG L9 (P760) from Artas and I used it fine for almost an year and then there was "kernel panic" on the phone. I didn't know what to do so I just restarted my phone and tried to flash that rom again and, long story short I think I bricked it.
I also tried to flash official KDZ from LG over LG Flash Tool and I didn't succed.
Few days later I contaced Artas personaly and he told me what to boot in fastboot and to erase misc and to flash recovery again. I tried everything (installed drivers and all that android stuff) but all I got was "waiting for device".
Later, he told me to try with Ubuntu so I installed Virtual Box and Ubuntu and I followed many tutorials but I still get " waiting for device" in Ubuntu terminal.
He also told me to install ADB universal drivers but I can't because first I have to enable "USB debugging" but I can't because I can't boot my phone.
So, if anyone can tell me or is willing to write me step-by-step guide I'd be very greatful!!! :thumbup:
If you need any more details, just tell me!!
P.S. Meanwhile I bought Galaxy Mega 6.3 but I need that LG because I have MicroSD card that can only work in that phone confused
P.P.S. Sorry for my English
Sent from my GT-I9205 using XDA Free mobile app
Try guide from this link
http://forum.xda-developers.com/showthread.php?t=2085344
I think i have all files to unbrick P790 i bricked my long time ago. I'll search fot them.
U can try to unbrick it through omap4boot read this
http://forum.xda-developers.com/showthread.php?t=1971014
http://forum.xda-developers.com/showthread.php?t=2119090
Here are needed files:
http://forum.xda-developers.com/showpost.php?p=39996388&postcount=4
IF phone can boot to S/W Upgrade than all is ok
yaroszek said:
Try guide from this link
http://forum.xda-developers.com/showthread.php?t=2085344
I think i have all files to unbrick P790 i bricked my long time ago. I'll search fot them.
U can try to unbrick it through omap4boot read this
http://forum.xda-developers.com/showthread.php?t=1971014
http://forum.xda-developers.com/showthread.php?t=2119090
Here are needed files:
http://forum.xda-developers.com/showpost.php?p=39996388&postcount=4
IF phone can boot to S/W Upgrade than all is ok
Click to expand...
Click to collapse
Thanks for the quick reply!! But I have a problem This is TMI for my brain xD Is there a simpler method for doing this? Or if you have time, to do step-by-step? I'm sorry, but I'm stupid for doing these stuff xD
Also, I heard that Linux is much better for these fastboot stuff so I installed it in VirtualBox... So if it's really easier to do it in Linux, you can send me link for Linux methods
I know pretty much nobody will answer this question but I'll still ask it anyway. I have a Samsung galaxy centura with cwm installed. After formatting the SD partiton and swap it has a unlit screen. When connection to a computer is comes up as Qualcomm hs USB or something like that. After a bit of research I found out a guide on XDA that explains that we can use a program called boarddiag to unbrick these devices. I followed the steps but I can't figure out the correct chip in the program. Basically what I want is someone to point me in the right direction in using the boarddiag program and unbricking my phone. I also need the correct .tot file contains the phone partitions such as aboot, boot,modem etc. Help would be extremely appreciated because I'm at a dead end over here. Even if you are not familiar with the centura any type of advice would do no matter how small.[emoji4]
Devmountsu77 said:
I know pretty much nobody will answer this question but I'll still ask it anyway. I have a Samsung galaxy centura with cwm installed. After formatting the SD partiton and swap it has a unlit screen. When connection to a computer is comes up as Qualcomm hs USB or something like that. After a bit of research I found out a guide on XDA that explains that we can use a program called boarddiag to unbrick these devices. I followed the steps but I can't figure out the correct chip in the program. Basically what I want is someone to point me in the right direction in using the boarddiag program and unbricking my phone. I also need the correct .tot file contains the phone partitions such as aboot, boot,modem etc. Help would be extremely appreciated because I'm at a dead end over here. Even if you are not familiar with the centura any type of advice would do no matter how small.[emoji4]
Click to expand...
Click to collapse
Good luck! You might try getting ahold of daddy366...he might be able to put you in contact with someone from team Centura...if there is a fix for black screen of death they would know.
Sent from my XT1609 using Tapatalk
I accidently erased the firmware off my Sky 5.5W and I have searched everywhere for it.
My computer recognises it but cant find the firmware .
Does anyone know where I can find it or if I can use different firmware?
Thanks
can you tell me the current condition of your device?
Like is it stuck on boot logo (boot loop)
or is it bricked?
I don't think it's bricked as the laptop still finds it.
try checking this link out
https://forum.xda-developers.com/showthread.php?t=1936747&page=2
also like my replies, its a great encouragement if you do so
Will it work with an mtk device.? I tried it but can find the proper software for it. The files the qfl asks for aren't apart of the files I have.
Well honestly I have never worked with MTK devices but I know what you should do.
Now if that's the case you may download SPFT (Smart Phone Flash Tool) and find the appropriate drivers for your MTK device and then flash the ROM you want to (I prefer the stock room).
I hope this will help you.
...I'm in similar position with a Platinum 5. Please let me know whether you found ROM for this device and if so where, and I'll let you know what I find out if you need. I think I'll try to get something from SKY themselves so wish me luck.
Hi all
I've managed to brick my Tb3 - not sure how, hadn't used it for a while, turnd it on & it is just stuck on the Lenovo loading screen. Tried booting into recovery but not working.
From what I've read, I need either the stock rom or at least the scatter.txt file to load into SP Flash tool.
I've googled everywhere but can't find either.
Does anyone have a link to, or can you provide 1 or both of the above? Ive tried requesting access to the google drive from Motojunkie01 but not had a response. Looks like his account is disabled.
https://forum.xda-developers.com/android/general/guide-lenovo-tab3-8-tb3-850f-t3559786
Please help - really need to get his up & running as it has some data I need on it.
Thanks
Dave
Dave19701 said:
Hi all
I've managed to brick my Tb3 - not sure how, hadn't used it for a while, turnd it on & it is just stuck on the Lenovo loading screen. Tried booting into recovery but not working.
From what I've read, I need either the stock rom or at least the scatter.txt file to load into SP Flash tool.
I've googled everywhere but can't find either.
Does anyone have a link to, or can you provide 1 or both of the above? Ive tried requesting access to the google drive from Motojunkie01 but not had a response. Looks like his account is disabled.
https://forum.xda-developers.com/android/general/guide-lenovo-tab3-8-tb3-850f-t3559786
Please help - really need to get his up & running as it has some data I need on it.
Thanks
Dave
Click to expand...
Click to collapse
Dave I know this is a super-late reply to this thread, but I just recently found an extremely simple way to unbrick the TB3-850F using the official Lenovo-Moto Smart Assistant (LMSA). If you, or anybody else reading this thread needs guidance on this, I'll be glad to help.