Hi, I want to execute (then install) an personalized Android ROM on my PC, I tried to change the distribution of Android x86 but the ISO file reconstructed (by Nero) is not read (An error tells me that no files were found for the start) and are not able to open (for modding) the file in SFS inside the original ISO. So I tried modding the files of Windroy Project and the result was more than excellent! (I have modded files of Windroy in C drive) but now I do not know how to make these files "installed" as indipendent OS, it is possible, and if so, how? Thanks for the answers
UP!!
I would like to run the. exe file in an base operating system (also CMD) that start the .exe by start, exist?
---blacksoul--- said:
Hi, I want to execute (then install) an personalized Android ROM on my PC, I tried to change the distribution of Android x86 but the ISO file reconstructed (by Nero) is not read (An error tells me that no files were found for the start) and are not able to open (for modding) the file in SFS inside the original ISO. So I tried modding the files of Windroy Project and the result was more than excellent! (I have modded files of Windroy in C drive) but now I do not know how to make these files "installed" as indipendent OS, it is possible, and if so, how? Thanks for the answers
Click to expand...
Click to collapse
try in here
http://forum.xda-developers.com/showthread.php?t=1272270
hawaja said:
try in here
http://forum.xda-developers.com/showthread.php?t=1272270
Click to expand...
Click to collapse
My problem is not knowing how modding a ROM, but to bring a ROM on PC and open that file type, which requires a separate procedure.
Description: Utility (hereinafter - the kitchen) to make changes to the firmware image for the Lenovo K900.
Operating System Requirements: Any Linux-like system (I recommend Ubuntu), any digit. For correct working kitchen must be installed packges: p7zip, p7zip-full, jdk, jre, python, ia32-libs.
Features: Removing the preinstalled Chinese software from the VibeROM firmwares; other firmware - manual; deodexing firmware; adding ROOT rights in firmware; editing build.prop; installing Google apps (* not verified), repacking the system.img.gz image.
Instructions for use:
- unpack the archive to any folder;
- Run the kitchen with console command ./kitchen.sh and enter the root password (required for file operations);
- Copy the file system.img or system.img.gz in a folder /in/;
- Enter 1 if throwing system.img.gz image archive folder in /in/, or go to step 2 if the folder /in/ drop files system.img;
- Type 2 to mount the image, while in the kitchen wearing the phrase "System: unmounted" will change to "System: mounted". The system is mounted in a folder /mount/;
Then simply describe the menu items:
3 - removes Chinese preinstalled software according file cn-apps in /scripts/ folder;
4 - "easier" firmware by deleting unnecessary files, animation off; applies mods - Record video to MP4, boot animation changed to "clipped " (you can change your folder /scripts/mod/);
5 - deodexing firmware (it takes quite a long time , up to 10 min);
6 - adding ROOT rights (used SuperSU 1.93). If you want to use a different version, you can replace the files in the /scripts/root/;
7 - editing build.prop file by using gedit;
8 - Set the Google apps light with a minimum set of software, you can further install more right already from Google Market (not tested);
9 - edited image packaging system system.img.gz. Ready to pick up the file from the folder /out/;
10 - unmount mounted image. Performed at the end of all operations with an editable manner;
0 - unpack inb firmware;
x - exit.
Download link:
http://forum.xda-developers.com/devdb/project/dl/?id=5359
Download mirror:
https://drive.google.com/folderview?id=0Bz3X7ZuowQimM3c0ZFV2QlZMR2c&usp=sharing
XDA:DevDB Information
Lenovo K900 kitchen, Tool/Utility for the Lenovo K900
Contributors
xxx-man-by
Version Information
Status: Testing
Stable Release Date: 2014-02-17
Created 2014-02-19
Last Updated 2014-06-07
What a great job！:good:
Amazing
Now its time to cook some ROM's
Lenovo K900 kitchen 1.21 beta
Released new version 1.21 beta
Whats new:
- Added support for firmware format INB (unpacking only);
- SuperSU binaries updated to version 1.93;
- Added support for complex tools with Android 4.3 (deodex, zipalign, optipng). Work is not very stable.
great, I hv prepared ubuntu and hv started cooking
Released new version 1.23
Whats new:
- Changed the script for implementation Root rights firmware (to fully support Android 4.3)
Just asking...
no kitchen for Windows7?
pjsplayez said:
Just asking...
no kitchen for Windows7?
Click to expand...
Click to collapse
No. Only for Linux-like OS, because Windows cannot work with images, mounting, rights etc...
Thank you i try it and install root Good Job
Just ask
xxx-man-by.. why not just "inb" file in "sdfuse" folder ?!. thanks before
Thank you, I am being to buy that device ^_^
Dual boot
Hello, anyone know how the best way to dual boot os in my laptop?
i want to boot windows 7 with ubuntu.
Hope anyone can give me guide or give me any link to make a dual boot.
help XXX-Man
i think the link is not working anymore.
REupload please
pjsplayez said:
help XXX-Man
i think the link is not working anymore.
REupload please
Click to expand...
Click to collapse
Ok. I`ll upload to the mirror. Please wait. DONE.
pjsplayez said:
Hello, anyone know how the best way to dual boot os in my laptop?
i want to boot windows 7 with ubuntu.
Hope anyone can give me guide or give me any link to make a dual boot.
Click to expand...
Click to collapse
if you need linux just for cooking, dont install it to harddrive.. just throwit on some usb drive and run it live..
use pendrivelinux or yumi to make live linux on usb.
xxx-man-by, if we have already the unpacked system folder like the VIBEROM Dev1418?
sev7en said:
xxx-man-by, if we have already the unpacked system folder like the VIBEROM Dev1418?
Click to expand...
Click to collapse
I do not understand what you mean.
xxx-man-by said:
I do not understand what you mean.
Click to expand...
Click to collapse
Good morning,
to start my kitchen, I download the original VIBEROM image file, redhookbay-ota-VIBEROM_V1.0_1418_DEV_K900.zip but if I extract it on the "IN" folder I haven't the .img packages to mount (e.g. the system folder is already unpacked):
Also, after that, I get only the system.img file but in other release I used before, e.g. the one for the VIVO, I had the way to pack directly the image to flash. Here which one is the next step?
Thank you,
sev7en said:
Good morning,
to start my kitchen, I download the original VIBEROM image file, redhookbay-ota-VIBEROM_V1.0_1418_DEV_K900.zip but if I extract it on the "IN" folder I haven't the .img packages to mount (e.g. the system folder is already unpacked):
Also, after that, I get only the system.img file but in other release I used before, e.g. the one for the VIVO, I had the way to pack directly the image to flash. Here which one is the next step?
Thank you,
Click to expand...
Click to collapse
redhookbay-ota-VIBEROM_V1.0_1418_DEV_K900.zip - this is ordinary zip file, K900 kitchen is not working with OTA zip archives. To start working with kitchen you need to put in the /in/ folder only system.img, system.img.gz, or any INB file (to unpack it). Only like this.
xxx-man-by said:
redhookbay-ota-VIBEROM_V1.0_1418_DEV_K900.zip - this is ordinary zip file, K900 kitchen is not working with OTA zip archives. To start working with kitchen you need to put in the /in/ folder only system.img, system.img.gz, or any INB file (to unpack it). Only like this.
Click to expand...
Click to collapse
thank you for getting me back sooner, with your unique Kitchen we are able to manage that files as well to repack them but when done how we get the final package to flash?
thanks once again for that
how to open the samsung stock firmware software without pc
Download required applications
download and install
1.) Zarhiver
https://play.google.com/store/apps/details?id=ru.zdevs.zarchiver
2.) Android İmages kitchen
https://play.google.com/store/apps/details?id=com.redlee90.imagekitchenforandroid
I assume you have downloaded the software you want to open
I have the Firmware 4-part view using Zarhive
Remove the files from the zip(rar,tar)
If you have a mistake, copy and paste
If you want, you can make flash with odin after this step but you need files
We reopen tar.md5 format files using Zarhives
We reopen boot.img.lz4 format files using Zarhives
We reopen boot.img. format files using Zarhives
Now in the work of the Android İmages kitchen
With the Plus in the application you unpack mount and select the file
Now our file in the img format are all the usual files that are all the usual use of the AP and CSC / Homecsc in the kitchen using the kitchen
kitchen transfers the extracted files to Sdcart in .raw format
See raw file with Zarhives
I hope you understand my language knowledge is small but if you have questions I can help
Android Image Kitchen is no more at the Play Store. It's now renamed to Android Image Studio.
https://apkpure.com/android-image-studio/com.redlee90.imagekitchenforandroid
I successfully flashed LineageOS on my Z5C with TRWP. As it doesn't wot with the Google Apps (GAPPS) I want to flash it with a stock ROM but these are only "-ftf" files. I found xperiastockrom.com/flash-sony-xperia-stock-rom that describes how to flash those *.ftf files, but this "FlashTool" is a Windows application - I do not have WIndows but Linux. How can I flash a *.ftf ROM with Linux?
Some Googling would have revealed that ".ftf" files are just ZIP files. They're not even the "official" Sony firmware files: ".ftf" (and the layout of the files within the ZIP archive) is just an extension that the Flashtool author came up with. (Flashtool is a third-party utility, not an official Sony application.)
There is no official Sony flash utility for Linux, either, but there is Xflasher, which is open-source and has a Linux build: https://forum.xda-developers.com/crossdevice-dev/sony/dev-xflasher-command-line-flasher-t2986634
Instructions for unlocking the bootloader on Android 12 (Realme UI 3.0).
1. First of all, you need to roll back to Android 10 (Realme UI 1.0) in this way — https://4pda.to/forum/index.php?showtopic=1018185&view=findpost&p=108649502 .
2. Then unlock the bootloader according to the instructions from here — https://4pda.to/forum/index.php?showtopic=1018185&view=findpost&p=108311204 .
3. After you will need to download the Android 11 firmware (Realme UI 2.0) from this link — http://rms01.realme.net/SW/realme service/realme 7 5G/20680/RMX2111GDPR_11_C.09_2022011518240000.zip .
4. After that, you need to unpack it to any folder on your PC. Next , you find a file with the extension in the unpacked files .ofp and unpack it using the MCT OFP Extractor program to another separate folder.
6. After completing the process, you search in the resulting file folder for four files that are parts of the super partition image with the .img extension. Having found them, you open the folder with adb tools and run from it
the command line, after which the smartphone, switched to Fastboot mode (it can also be flashed in Fastbootd, is flashed both there and there), connect to the PC and flash these files in the order in which they are located in the folder with this command, changing only the name of the file being flashed:
fastboot flash super file name.img
7. At the end, you run the program to bypass the protection in the SP Flash Tool and this utility itself, specify in it as Scatter and Authentication files the files from the last folder (into which the extension file was unpacked.ofp), connect a smartphone in Bootrom mode, disable protection and flash all remaining files.
8. Then you download this Android 12 firmware (Realme UI 3.0) — https://rms01.realme.net/sw/RMX2111GDPR_11_F.04_2022080921130000.zip and repeat steps 4 to 7, flashing files already from it.
In the end, you will get a smartphone on the latest firmware with an unlocked bootloader, if you do everything right.
Not working
Hi. How to fix it ?