Related
Hey guys
While using Rom Manager the application asked me to install clockwork mod recovery (although I had a previous version), it installed it (a newer version I guess) but then when I rebooted into recovery, I got the "emergency mode" screen for a couple of minutes. I removed the battery and put it back, restarted the phone but it got stuck at the LG logo. I tried the recovery combo (with volume-up key), and the other one (with volume-down key) but no result. So is my phone bricked ?
If repairing it requires the computer, please send me the drivers links because the ones from the LG website don't work properly for me. I'm on windows 7 64bits.
Please help guys.
Thanks.
Search it in hehappy thread he posted it there
Sent from my LG-P500 using xda premium
U might want to use kdz or lgmdp to fix ur phone. Apparently u 'soft' bricked ur phone. Dun worry it is fixable though
Sent from my LG-P500 using xda premium
If you are able to enter fastboot mode(HOME+POWER), then use the following tutorial:
[HOWTO] Revive a bricked P500 on fastboot mode
For required items:
Get drivers from here
Get recovery image from here
> cwm.is pretty buggy lately
Sent from my awsome LG P500 Running RAZRUI
I flashed the officiel firmware through KDZ, the device booted correctly but stopped at the "android" logo. I tried with another firmware image, same result. Then I thought about flashing cwm 5.0.2.0 with lgmdp, and then flashing a custom rom, using this tutorial here http://forum.xda-developers.com/showthread.php?t=1318750 but it didn't help. When I try the recovery combo now, I get a loading screen from the recovery (a progress bar) for seconds and then the phone reboots.
Guys please help me I need to fix my phone. Any help is appreciated.
hccompany said:
I flashed the officiel firmware through KDZ, the device booted correctly but stopped at the "android" logo. I tried with another firmware image, same result. Then I thought about flashing cwm 5.0.2.0 with lgmdp, and then flashing a custom rom, using this tutorial here http://forum.xda-developers.com/showthread.php?t=1318750 but it didn't help. When I try the recovery combo now, I get a loading screen from the recovery (a progress bar) for seconds and then the phone reboots.
Guys please help me I need to fix my phone. Any help is appreciated.
Click to expand...
Click to collapse
flash a .kdz if stop again in android logo you do a hard reset volup+home+power then your phone will turn on try it please...
do you need a .kdz file?
I tried with different .kdz files, for v20 and v10, same problem.
hard resetting the phone gets me into emergency mode :/
HELP
hccompany said:
I tried with different .kdz files, for v20 and v10, same problem.
hard resetting the phone gets me into emergency mode :/
HELP
Click to expand...
Click to collapse
do you now how to use LGMDP???
Yes I tried with LGMDP I tried flashing a .kdz file, and tried flashing custom recovery. I'm not sure I selected the right folder, and not sure about the files for the custom recovery on LGMDP but it didn't work.
im uploading a zip inside zip it have a folder with V20I to flash by LGMDP.
you put your phone on emergency mode go to lgmdp connect to to phone and then in that window whre you put the path to recovery you flashed you will put the folder im uploading and then start flash phone when it finished it will reboots or turn phone off and you should be fine.
10m i give you link to V20I to flash by lgmdp
---------- Post added at 07:41 PM ---------- Previous post was at 07:29 PM ----------
http://www.mediafire.com/?yz00j0whx9sxck0
there you go best of luck
the way i speak above is the way i always use lgmdp and never got a issue.
Alright i'm downloading now.
Thanks man
1st boot always is a bit longer than normal so if in android logo before 4:5m if dont boot dont stress ok....
IT WORKS !
THAAAAAAAAANKS it's fixed
I really appreciate your help, thanks man !
Im glad you can press thanks lol
Sent from my LG-P500 using XDA
No need for LGMDP use...
Man,
this thing happened to me when i tried to flash cwmd using rommanager...I just fixed it by turning the fone to emergency mod and flashed the same rom(the kdz file from online sources) by selecting emergency in kdz updater...and there it goes,it just started and same way gone to be likely stucked at android logo ....but just wait for atleast 5 minutes..i also got panicked but it just booted safely nd i arrived the homescreen.....The only problem is i cant boot into recovery its going factory reset).... I think this wud hve been ur case too....
ajaihs said:
.....The only problem is i cant boot into recovery its going factory reset).... I think this wud hve been ur case too....
Click to expand...
Click to collapse
Flashing a kdz means stock rom and stock recovery. You'll have to re-root & re-flash custom recovery.
CWM 5.0.2.7 is reportedly buggy. Use 5.0.2.0 or better still, Amonra recovery which works flawlessly. Then you can go on to flash any custom ROM you like.
Hope this helps.
ajaihs said:
Man,
this thing happened to me when i tried to flash cwmd using rommanager...I just fixed it by turning the fone to emergency mod and flashed the same rom(the kdz file from online sources) by selecting emergency in kdz updater...and there it goes,it just started and same way gone to be likely stucked at android logo ....but just wait for atleast 5 minutes..i also got panicked but it just booted safely nd i arrived the homescreen.....The only problem is i cant boot into recovery its going factory reset).... I think this wud hve been ur case too....
Click to expand...
Click to collapse
or simply use LGMDP to flash a recovery lol you guys are so afraid of LGMDP and its by far more stable than KDZupdater...
just my 2cents...
lipe082 said:
or simply use LGMDP to flash a recovery lol you guys are so afraid of LGMDP and its by far more stable than KDZupdater...
just my 2cents...
Click to expand...
Click to collapse
I agree with lipe. Flashing a recovery using LGMDP is smooth & painless....
I tried to update to JB v20b Ind form V20a. I was rooted with cwm . so after downloading 38 mb data it asked to reboot for update . but as cwm was there so it didnt go to stock recovery. now whatever am doing its coming back to CWM. if i flash another rom also and reboot again back to CWM . cant do anything . please help.
rashq said:
I tried to update to JB v20b Ind form V20a. I was rooted with cwm . so after downloading 38 mb data it asked to reboot for update . but as cwm was there so it didnt go to stock recovery. now whatever am doing its coming back to CWM. if i flash another rom also and reboot again back to CWM . cant do anything . please help.
Click to expand...
Click to collapse
Please any1
a) OTA update doesn't work with CWM. That's the reason you get stuck at first place.
b) What do you mean by "flash another rom also and reboot again back to CWM". Did you offline flash KDZ file, factory reset and it still go back to CWM? That is impossible as offline flash KDZ will definitely destroy CWM.
c) Be patient. People come here to help, but it take time.
mrmathematica said:
a) OTA update doesn't work with CWM. That's the reason you get stuck at first place.
b) What do you mean by "flash another rom also and reboot again back to CWM". Did you offline flash KDZ file, factory reset and it still go back to CWM? That is impossible as offline flash KDZ will definitely destroy CWM.
c) Be patient. People come here to help, but it take time.
Click to expand...
Click to collapse
Flashing other rom means i have few roms on ext sd. slimbean and cm . after flashing when i reboot it comes back to CWM .
I am not able to do offline KDZ flash as it is not able to detect phone.
Trying with LG mobile support tool now.
Had the same thing. Look up LG Mobile support tool. It will update your phone to the latest software version. Of course you will lose all data & root.
Finally got it working via lg mobile support tool.
Just out of curiosity what might have happened that system was not going beyond CWM.
Also what if i had the latest version of JB, still lg mobile support tool would have worked ??
rashq said:
Finally got it working via lg mobile support tool.
Just out of curiosity what might have happened that system was not going beyond CWM.
Also what if i had the latest version of JB, still lg mobile support tool would have worked ??
Click to expand...
Click to collapse
A faster fix what have been doing the following
http://forum.xda-developers.com/showpost.php?p=44814547&postcount=13
CM 10.1 P769
kuma82 said:
A faster fix what have been doing the following
http://forum.xda-developers.com/showpost.php?p=44814547&postcount=13
CM 10.1 P769
Click to expand...
Click to collapse
Great , now i can again start experimenting
Thanks for the quick solution.
Next time for sure. But i hope not to repeat the same mistake
kuma82 said:
A faster fix what have been doing the following
http://forum.xda-developers.com/showpost.php?p=44814547&postcount=13
CM 10.1 P769
Click to expand...
Click to collapse
@kuma82 Is there any way to remove CWM. Yesterday i searched but couldnt find any. Some said using rom manager but p765 is not supported by rom manager only p760 ( oficially)
rashq said:
@kuma82 Is there any way to remove CWM. Yesterday i searched but couldnt find any. Some said using rom manager but p765 is not supported by rom manager only p760 ( oficially)
Click to expand...
Click to collapse
twrp by Lelus for your model number.
You can use nandroid manger to install it or use that zip I made to flash it with cwm. If you use my zip rename twrp.img to 3-recovery.img
CM 10.1 P769
please help me... i have an lg optimus L9 p760, i updated to jb a month ago.. now, i rooted it with LGPwn , installed cwm and busybox...
Yesterday i flashed with cwm a .zip called "mount external memory as internal". After that, my phone cant enter into settings>storage , storage>backup&restore and cant enter in messages( it says "unfortunately, messaging has stopped") .
What to do??:crying::crying:
i also restored it by hard reset(vol down + power+home), but nothing....cleared dalvick cache and cache memory....nothing
i unrooted it and i am planning to send it in waranty.
please help..:crying::crying:
victor_con said:
please help me... i have an lg optimus L9 p760, i updated to jb a month ago.. now, i rooted it with LGPwn , installed cwm and busybox...
Yesterday i flashed with cwm a .zip called "mount external memory as internal". After that, my phone cant enter into settings>storage , storage>backup&restore and cant enter in messages( it says "unfortunately, messaging has stopped") .
What to do??:crying::crying:
i also restored it by hard reset(vol down + power+home), but nothing....cleared dalvick cache and cache memory....nothing
i unrooted it and i am planning to send it in waranty.
please help..:crying::crying:
Click to expand...
Click to collapse
I think you dont need to send it
Im not expert, but i think this will work. Flash v10a with offline flashing method, after the version you have now.
You will loose all data, but it needs to work.
Sorry for my bad english
andras7008 said:
I think you dont need to send it
Im not expert, but i think this will work. Flash v10a with offline flashing method, after the version you have now.
You will loose all data, but it needs to work.
Sorry for my bad english
Click to expand...
Click to collapse
thanks for reply.....
i tried flashing a kdz rom using lg tool mobile but at 15 % at flashing process, i get an error...something like this "pc an phone isnt connected...." i think..
also my phone cant see my ext sd card.(i tried to swap internal and externaal memorys, thats why i flashed the zip file...) somewhere there is a problem..in the android script (i think...) oooooommmmmmmmgggggggg..:crying::crying::crying::crying::crying::crying::crying:
victor_con said:
thanks for reply.....
i tried flashing a kdz rom using lg tool mobile but at 15 % at flashing process, i get an error...something like this "pc an phone isnt connected...." i think..
also my phone cant see my ext sd card.(i tried to swap internal and externaal memorys, thats why i flashed the zip file...) somewhere there is a problem..in the android script (i think...) oooooommmmmmmmgggggggg..:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Are you tried v10a first? choose emergency for it
Shut down your phone, press vol+ and connect it via USB to the PC. Then restore the host file you modified to upgrade with the offline method, go to LG support tool and select something like "restore upgrade error" it will erase everything and install a fresh LG fw based on your imei (maybe it will not install a Europe open version, but at least it will be a working one and from that point you'll be able to work and whatever you want)
Inviato dal mio LG-P760 utilizzando Tapatalk
Many of you will have happened to them what to me, upgraded to VDF KitKat and then realized that root could not be and without root cannot modify anything.
You tried to Flash a ROM JB format KDZ and found out that you can't.
Behold the solution!!
Back to Jelly Bean in a LG G2
It is a bit laborious but simple
1.- Will have to follow the tutorial Manual LGFlashtool, here one is Spanish with pictures and everything, here hyelton LG G2 Stock Firmware (Go Back to Stock)
2.- Download the ROM TOT JB for your phone model: http://downloads.codefi.re/autoprime/LG/LG_G2
3.- Turn on the phone in mode Downloader, (Vol+ & USB to PC)
4.- Connect the phone to the USB port and start the downgrade
5.- When finished it will skip this message on the phone:
"Enter the PIN/password to decrypt"
[_____________________]
NOTE
There I was wrong, and I didn't know that, but I think that it must be the password for your Gmail account
As I have said, I'm wrong, because I turned off the phone, then I had to activate the keyboard from the status bar, enter Hidden Menu (in my case I have a D802 - 3845#*802#) and do a Factory Reset.
I'm not sure if it will erase everything by typing the correct code, including the SD, but when in doubt and always before flashing I recommend BACKUP, BACKUP, BACKUP...
Now you can already root install modified Recovery and install KK rooted from Recovery
Good lucky
Doesn't work for D805, have the ToT but don't have the DLL for D805
Ps: tried to extract DLL from KDZ file but i receive:
CrossDL [D802] to [D805] error in LG Flash Tools
ioroot25 can root stock kitkat and you can get twrp recovery with autorec
Homero2 said:
Many of you will have happened to them what to me, upgraded to VDF KitKat and then realized that root could not be and without root cannot modify anything.
You tried to Flash a ROM JB format KDZ and found out that you can't.
Behold the solution!!
Back to Jelly Bean in a LG G2
It is a bit laborious but simple
1.- Will have to follow the tutorial Manual LGFlashtool, here one is Spanish with pictures and everything, here hyelton LG G2 Stock Firmware (Go Back to Stock)
2.- Download the ROM TOT JB for your phone model: http://downloads.codefi.re/autoprime/LG/LG_G2
3.- Turn on the phone in mode Downloader, (Vol+ & USB to PC)
4.- Connect the phone to the USB port and start the downgrade
5.- When finished it will skip this message on the phone:
"Enter the PIN/password to decrypt"
[_____________________]
NOTE
There I was wrong, and I didn't know that, but I think that it must be the password for your Gmail account
As I have said, I'm wrong, because I turned off the phone, then I had to activate the keyboard from the status bar, enter Hidden Menu (in my case I have a D802 - 3845#*802#) and do a Factory Reset.
I'm not sure if it will erase everything by typing the correct code, including the SD, but when in doubt and always before flashing I recommend BACKUP, BACKUP, BACKUP...
Now you can already root install modified Recovery and install KK rooted from Recovery
Good lucky
Click to expand...
Click to collapse
Which file for jelly bean bro whats its name?
cmanju88 said:
Which file for jelly bean bro whats its name?
Click to expand...
Click to collapse
Hello cmanju88, this is the method I use to move from KK to JB, the ROM KDZ the LG Server Disclaimer, the TOT from the link I put above.
To Flash ROM version will vary depending on the phone model, for example
G2 - D80x
V10x = JB
V20x = KK
Homero2 said:
Hello cmanju88, this is the method I use to move from KK to JB, the ROM KDZ the LG Server Disclaimer, the TOT from the link I put above.
To Flash ROM version will vary depending on the phone model, for example
G2 - D80x
V10x = JB
V20x = KK
Click to expand...
Click to collapse
Is this file works on lg g2 16GB Indian international phone.?
Homero2 said:
Hello cmanju88, this is the method I use to move from KK to JB, the ROM KDZ the LG Server Disclaimer, the TOT from the link I put above.
To Flash ROM version will vary depending on the phone model, for example
G2 - D80x
V10x = JB
V20x = KK
Click to expand...
Click to collapse
I downloaded the jelly bean kdz file and installed but it got stuck boot looping. Just shuts down, starts and repeats. It doesn't work. Also mine doesn't even go for stock recovery, it just restarts.
cmanju88 said:
I downloaded the jelly bean kdz file and installed but it got stuck boot looping. Just shuts down, starts and repeats. It doesn't work. Also mine doesn't even go for stock recovery, it just restarts.
Click to expand...
Click to collapse
Hi cmanju88
Did you manage to go back to JB? which KDZ file did you download? and where did you find it? i want to go back to JB also :angel:
Thanks
Eelvex said:
Hi cmanju88
Did you manage to go back to JB? which KDZ file did you download? and where did you find it? i want to go back to JB also :angel:
Thanks
Click to expand...
Click to collapse
use this tool and flash JB kdz of u'r phone model using CPE flash method. u can easily go back to JB.
http://forum.xda-developers.com/showthread.php?t=2797190
createben said:
use this tool and flash JB kdz of u'r phone model using CPE flash method. u can easily go back to JB.
http://forum.xda-developers.com/showthread.php?t=2797190
Click to expand...
Click to collapse
Hi createben
Thanks for the fast reply ,My phone is not rooted i just updated to KK via wifi and i want to go back to JB i have LG g2 Model number LG-D802
software version D80220c-AME-XX, Can you please tell me wich KDZ file i should use and where i can download it from?
Thanks in advance
Homero2 said:
Many of you will have happened to them what to me, upgraded to VDF KitKat and then realized that root could not be and without root cannot modify anything.
You tried to Flash a ROM JB format KDZ and found out that you can't.
Behold the solution!!
Back to Jelly Bean in a LG G2
It is a bit laborious but simple
1.- Will have to follow the tutorial Manual LGFlashtool, here one is Spanish with pictures and everything, here hyelton LG G2 Stock Firmware (Go Back to Stock)
2.- Download the ROM TOT JB for your phone model: http://downloads.codefi.re/autoprime/LG/LG_G2
3.- Turn on the phone in mode Downloader, (Vol+ & USB to PC)
4.- Connect the phone to the USB port and start the downgrade
5.- When finished it will skip this message on the phone:
"Enter the PIN/password to decrypt"
[_____________________]
NOTE
There I was wrong, and I didn't know that, but I think that it must be the password for your Gmail account
As I have said, I'm wrong, because I turned off the phone, then I had to activate the keyboard from the status bar, enter Hidden Menu (in my case I have a D802 - 3845#*802#) and do a Factory Reset.
I'm not sure if it will erase everything by typing the correct code, including the SD, but when in doubt and always before flashing I recommend BACKUP, BACKUP, BACKUP...
Now you can already root install modified Recovery and install KK rooted from Recovery
Good lucky
Click to expand...
Click to collapse
Is this for the 16GB version or the 32GB version? You didn't specify anywhere and I just want to confirm before i accidentally brick my phone by flashing the wrong firmware.
Hello friends,
I have galaxy the 920x (the demo version) and I tried to flash twrp viauOdin. Everything worked but after restart it stucks at the Galaxy logo. Now I downloaded a full stock firmware and tried to flash via Odin and every time it fails at flash nand. Any help? Can I do something about it?
Sent from my Optimus G using XDA Free mobile app
obaidr said:
Hello friends,
I have galaxy the 920x (the demo version) and I tried to flash twrp viauOdin. Everything worked but after restart it stucks at the Galaxy logo. Now I downloaded a full stock firmware and tried to flash via Odin and every time it fails at flash nand. Any help? Can I do something about it?
Sent from my Optimus G using XDA Free mobile app
Click to expand...
Click to collapse
Did you unzip the download
obaidr said:
Hello friends,
I have galaxy the 920x (the demo version) and I tried to flash twrp viauOdin. Everything worked but after restart it stucks at the Galaxy logo. Now I downloaded a full stock firmware and tried to flash via Odin and every time it fails at flash nand. Any help? Can I do something about it?
Sent from my Optimus G using XDA Free mobile app
Click to expand...
Click to collapse
i also have the same problem with 920x (the demo version) i did the same wey
Yes of course. Everything is fine and it does the first steps but it fails at writing the nand. Does anyone have a PIT file? Maybe that way it can be fixed. I think the pit is wrong and Odin addresses a wrong area of the nand memory.
Sent from my Optimus G using XDA Free mobile app
Damn, i have the same issue, after flashing the TWRP recovery image with Flashify, my phone is stuck at the splash screen "Samsung Galaxy S6 Edge", i tried to flash the root file with the stock recovery (the 920f one), and my phone doesn't boot... So i also tried to flash a stock firmware through Odin and i have the nand fail error ! Hope that we'll have a solution quickly.
Maybe there is a way to read the nand structure of 920x. That might help solving the problem.
Sent from my Optimus G using XDA Free mobile app
Problem solved but i have a 925f not a 920x :/
It's the demo version for the Edge or for the normal S6 ?
You need to flash the right firmware for the right version through Odin.
do you guys tried odin the stock recovery 1st?
Where can I find the stock recovery?
Sent from my Optimus G using XDA Free mobile app
Ok for what its worth it:
the follwoing files can write the nand:
CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5
twrp-2.8.6.0-zerofltespr.img.tar
But the phone doesnt go into recovery, eventhough the setup processes is successful.
The following files however, can not write to nand and fail:
G920FXXU1AOD9_G920FOXA1AOD9_G920FXXU1AOD9_HOME.tar.md5
G920F-XXU1AOD9-BOOTLOADER.tar.md5
Maybe it helps a little.
But the phone cannot boot anything but the download mode.
obaidr said:
Ok for what its worth it:
the follwoing files can write the nand:
CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5
twrp-2.8.6.0-zerofltespr.img.tar
But the phone doesnt go into recovery, eventhough the setup processes is successful.
The following files however, can not write to nand and fail:
G920FXXU1AOD9_G920FOXA1AOD9_G920FXXU1AOD9_HOME.tar.md5
G920F-XXU1AOD9-BOOTLOADER.tar.md5
Maybe it helps a little.
But the phone cannot boot anything but the download mode.
Click to expand...
Click to collapse
CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 ---> International Version
twrp-2.8.6.0-zerofltespr.img.tar ----> TWRP for Sprint S6
now does those files compatible with your phone? I know u said you have galaxy the 920x (the demo version) but I really can't tell you does those files work with your phone or not, may be not that's why your phone is soft brick right now.
Maybe but the first file I flashed and which made the phone stuck at the logo was the root file. I tried the other files to solve the problems. But still usually it should let me flash a original file from Samsung servers but it doesn't. Nand write error.
Sent from my Optimus G using XDA Free mobile app
same problem
Kev Lav said:
Damn, i have the same issue, after flashing the TWRP recovery image with Flashify, my phone is stuck at the splash screen "Samsung Galaxy S6 Edge", i tried to flash the root file with the stock recovery (the 920f one), and my phone doesn't boot... So i also tried to flash a stock firmware through Odin and i have the nand fail error ! Hope that we'll have a solution quickly.
Click to expand...
Click to collapse
have you solved it ...?? facing same problem
I have the same with my G925F, used the howto-flash-g92xf-and my phone doesn't boot only the splash screen
download kies 3 and then plug your device in, go to tools at the top and then firmware upgrade and initialisation, enter sm-g925f in the model number and then when it asks for your serial number then enter it from the back of the phone. (its in really faint writing) then follow the onscreen instructions
sometimes people have select reactivation lock in Samsung account and that block flash
http://forum.xda-developers.com/showthread.php?p=61576005
Have the same problem dont know what to do, anyone can solve the problem. I flash the root file with odin it give me an error, then a screen of warning to start the phone with smart switch, try to flash stock fw, and Im here blocked, please help, thanks.
You can try this guys, It worked for me, but the "secret codes" on phone app won't work (doesnt for me). If anyone find a way to solve this, it would be great!!!
http://forum.xda-developers.com/showpost.php?p=63668700&postcount=31