Related
Hi All,
All the features are incorporated in the MiniCM6 v 1.0.1 found here
Hit Thanks if you like my post
facing too much reboot after this update check for bugs
thnx
sachith024 said:
Hi All,
I just integrated doixanh modules into a update.zip file. I claim no credit.
MultiTouch v005
UnderVolt v001
MDDI v001
OverClock 249/748 (no module)
Xrec installable
Hit Thanks if you like my post
Click to expand...
Click to collapse
check wifi folder it may be the problem
sachith024 said:
Hi All,
I just integrated doixanh modules into a update.zip file. I claim no credit.
MultiTouch v005
UnderVolt v001
MDDI v001
OverClock 249/748 (no module)
Xrec installable
Hit Thanks if you like my post
Click to expand...
Click to collapse
This is fixed version
working fine for me
its with the default over-clocking(710)
thnx
abhi98228 said:
This is fixed version
working fine for me
its with the default over-clocking(710)
thnx
Click to expand...
Click to collapse
Works very well for me your fixed version.Thank you !
Since installing this my battery life has literally more than doubled so for that alone you have my thanks, wouldn't of installed the seperate modules but you have made it easy, good work
Sent from my X10mini using XDA App
Hi,
Thanks for the collection of updates. I for one, have also experienced the rebooting bugs.
I think the undervolting of the phone makes it reboot. I have especially experienced the rebooting when the phone tries to reconnect to wifi after being idle for some time. Maybe it draws too much current for the idle condition to supply enough power, and therefore reboots the phone?
Regards,
mfas
nice nice only why undervolt AND overclock the overclock module is already undervolted
owain94 said:
nice nice only why undervolt AND overclock the overclock module is already undervolted
Click to expand...
Click to collapse
nice nice only why undervolt AND overclock the overclock module is already undervolted
Nice work, that was my first idea with tweaks, but... i dont have a mini so i cannot test...
owain94 said:
nice nice only why undervolt AND overclock the overclock module is already undervolted
Click to expand...
Click to collapse
the overclock module is not included in this.
overclock applied through hw_config.sh
echo freq > /sys/devices/system/cpu/cpu0/cpufreq/scaling_<min or max>_freq
again... borrowed from D4rKn3sSyS...thanks to him
mfas said:
Hi,
Thanks for the collection of updates. I for one, have also experienced the rebooting bugs.
I think the undervolting of the phone makes it reboot. I have especially experienced the rebooting when the phone tries to reconnect to wifi after being idle for some time. Maybe it draws too much current for the idle condition to supply enough power, and therefore reboots the phone?
Regards,
mfas
Click to expand...
Click to collapse
not sure y its happening... one of my friend is also facing problem with v1
use abhi's or v2 .zip and let me know if it works for you.
will do some more experiments and update if required
Thank you for this compilation, just a few questions though, I want to clarify something..
1. Just want to ask if what I did was right: renamed zip file to update.zip and installed via xrec, correct?
2. How can I test all modules if it worked?
Thanks and regards,
Xaeons
Xaeons said:
Thank you for this compilation, just a few questions though, I want to clarify something..
1. Just want to ask if what I did was right: renamed zip file to update.zip and installed via xrec, correct?
2. How can I test all modules if it worked?
Thanks and regards,
Xaeons
Click to expand...
Click to collapse
1. UV- battery life increases
2. MDDI lag... its hardly noticable
3. MT- download multi touch visualizer from market and test it
4. OC- install set cpu and check the max n min freq...
Thanks satchith, I'll test it on the ff days..
Though when I tried Quadrant Advanced, back then my average was between 900-1000, now its 1100-1200..
hello guys,
i noticed that when i install the existing module the brightnes of the phone lowers ,do you know anything about that?
thank you
mitsos16x said:
hello guys,
i noticed that when i install the existing module the brightnes of the phone lowers ,do you know anything about that?
thank you
Click to expand...
Click to collapse
Thanks for ur feedback, brightness issue fixed. Please test and let me know
Hello!
This Files Works On Stock SE ROM?
dark_zhero said:
This Files Works On Stock SE ROM?
Click to expand...
Click to collapse
HTML:
echo freq > /sys/devices/system/cpu/cpu0/cpufreq/scaling_<min or max>_freq
Works well
Is ther ny update in MDDI or Undervolt????
FreeKernel for the Sony Xperia U
Sources for this kernel are here: https://github.com/keiranFTW/android_kernel_sony_u8500
By flashing this you agree that you will not hold me responsible for anything bad that happens whether caused directly or indirectly as a result of flashing this.
I don't yet have the device, so you are the testers, if you flash, please post your experience and issues while using this kernel.
Donations are greatly appreciated, but certainly not required. If you would like to thank me for my work and help contribute to the cost of the device then there is a "donate to me" button at the side of this post.
As always, thanks are also appreciated greatly.
See second post for changelog and download.
Installation
First of all, download the kernel.elf file below, which you will flash to your device.
Test version: here
Plug your device into the computer in fastboot mode.
Now, open a command prompt/terminal and execute the following command:
Code:
fastboot flash boot kernel.elf
Then:
Code:
fastboot reboot
If you flash it, please post your experience/issues on this thread
Thx keiran, i'll try your kernel as soon as i get home tonight
the phone boots and works well for now on KA02 Xperia SSpeed ROM
il try it 2morrow...dont have much time rite now ......
but i still want to see what the proccessor is capable of....maybe bump it to 1.5ghz just to see how it goes ....
Just flashed, very good
unreal3000 said:
il try it 2morrow...dont have much time rite now ......
but i still want to see what the proccessor is capable of....maybe bump it to 1.5ghz just to see how it goes ....
Click to expand...
Click to collapse
I couldn't do that for a few reasons:
- the overclock threshold of the novathor u8500 (our "chip") isn't known
- 1.5GHz would most certainly cause your device to not even boot
- I don't yet have the device to test overclock and I don't want to damage anyone elses device by putting something in my kernel that isn't tested.
Hope you understand,
Keiran
KeiranFTW said:
I couldn't do that for a few reasons:
- the overclock threshold of the novathor u8500 (our "chip") isn't known
- 1.5GHz would most certainly cause your device to not even boot
- I don't yet have the device to test overclock and I don't want to damage anyone elses device by putting something in my kernel that isn't tested.
Hope you understand,
Keiran
Click to expand...
Click to collapse
no i mean when we have sufficient info and experience to oc that much...and just to try...definitly not for daily use probably would need to overvolt too,,, also, our phone uses the mali400 gpu...sgs2 users have managed to overclock it...im guess we could do the same? probably would be easier to impliment... ours probably is only a single or dual core gpu, compared to the sgs2 quad core gpu. but looking at the some document and write ups on mali400, it still should be very similar... possible? tks fr your hardwork!
I would like to test it but i can´t find the kernel. Some help?
I haven't had a look at the Mali400 GPU driver yet, but it runs at 200MHz single core iirc, but I will have a look at it in more depth when I have the device at least then I would be able to debug.
gengi said:
I would like to test it but i can´t find the kernel. Some help?
Click to expand...
Click to collapse
refresh da page
I don´t have a unlocked bootloader. Can´t you make a version that can be flashed with flashtools ? I can donate for your time...
gengi said:
I don´t have a unlocked bootloader. Can´t you make a version that can be flashed with flashtools ? I can donate for your time...
Click to expand...
Click to collapse
No, at the moment that is not possible unfortunately.
To flash a custom kernel, you need an unlocked bootloader
Keiran
Nooooooooooooooo... i would be a happy if i could root the device... Not easy... :silly:
is der a easy way to root our device U ???
Is der any chance tat u will develop an ICS for "Xperia U" along with ur kernal., then tat wud be nice
well i was looking arround for gpu oc...
found this- https://github.com/chris41g/LoStKernel/commit/de45493b3fe2948581f2f554dfde6ab77979c83f
http://forum.xda-developers.com/showthread.php?t=1296348
found a commit for a kernel which adds gpu clock control to mali400 gpu....
sadly i am not experienced enough to do anything more
would u?
It's a good kernel, but where's a log??? it's quite stable but nothing else...
Vitophone said:
It's a good kernel, but where's a log??? it's quite stable but nothing else...
Click to expand...
Click to collapse
That's fair enough. This was only a test release and I will be sure to release a new kernel with more features soon.
KeiranFTW said:
That's fair enough. This was only a test release and I will be sure to release a new kernel with more features soon.
Click to expand...
Click to collapse
OK, it's a good beginnig; i tried all kernels for our device and your kernel has a little more lags than Krappabel's kernel v1
Vitophone said:
OK, it's a good beginnig; i tried all kernels for our device and your kernel has a little more lags than Krappabel's kernel v1
Click to expand...
Click to collapse
That's expected, I still have a lot of work to do on this kernel
Features:
Don't need modules, everything included in the kernel
Init.d script support (Requires busybox in xbin)
Lulzactive, Hotplug, SmartassV2 governors
SIO, VR schedulers
Avaliable CPU frequencies: 98MHz, 196MHz, 320MHz, 480MHz, 600MHz, 800MHz, 1GHz, 1,2GHz, 1,4GHz
Default max CPU frequency: 1GHz (600MHz when screen is off)
Default min CPU frequency: 98MHz
Requirements:
Unlocked bootloader
Fastboot
Download:
http://rapidgator.net/folder/1552230/protoukernel.html
Install:
Boot to bootloader
Install the kernel with fastboot: "fastboot flash boot 'kernelname'.img"
Reboot and enjoy!
Sources:
https://github.com/atis112/htc_kernel_protou
Changelog:
v2:
Init.d support
SIO, VR scheduler
New CPU freq table with overclock
v1:
Based on 1.18.980.3
Don't use modules, all features included to the kernel
Lulzactive, hotplug and smartassV2 governors added
Wow! Nice work!
Do you mind if I add this in my ROM? And does it have init.d support?
MaartenXDA said:
Wow! Nice work!
Do you mind if I add this in my ROM? And does it have init.d support?
Click to expand...
Click to collapse
I didn't edit the ramdisk yet, but i will add init.d support in next version.
I don't mind it. Just don't forget credits.
atis112 said:
I didn't edit the ramdisk yet, but i will add init.d support in next version.
I don't mind it. Just don't forget credits.
Click to expand...
Click to collapse
Oh, then I'll wait for next version before I add it in my ROM
Anyways, this is great! Great to have yet another developer in the DX section
And we finally got a custom kernel for DesX.
Thanks man, added to Index.
Re: [KERNEL]Tweaked kernel 1.0[10/02/2013]
Hot diggity! A new kernel!!!! Awesome! We can over clock with this, right? Not that I'll over clock, just to ask
Sent from my HTC Desire X using xda app-developers app
Stereo8 said:
Hot diggity! A new kernel!!!! Awesome! We can over clock with this, right? Not that I'll over clock, just to ask
Sent from my HTC Desire X using xda app-developers app
Click to expand...
Click to collapse
Not yet. But i can make overclocked kernel later. But i think 1ghz dual-core is enough for ics.
I think that greater number governors and schedulers are more important than overclocking, you're 100% right with speed for ICS and even JB.
Re: [KERNEL]Tweaked kernel 1.0[10/02/2013]
nlooooo said:
I think that greater number governors and schedulers are more important than overclocking, you're 100% right with speed for ICS and even JB.
Click to expand...
Click to collapse
Yea, I hate overclocking, but just for the reference...
Sent from my HTC branded muffin...
720 p recordings
Great work and a great contribution to hdx community...
A req! Can u plz add 720p recording in next ver.
madhavagg16 said:
Great work and a great contribution to hdx community...
A req! Can u plz add 720p recording in next ver.
Click to expand...
Click to collapse
not a kernel feature requires correct media codecs.
Edit : @Dev congrats First custom kernel for this device(max safe oc for this processor is 1.2 GHz just saying) also a request can you add ROW IO sheduler heard its better than SIO also PegasusQ/D governer.In next release.
Thank you.
hi
atis112 said:
I didn't edit the ramdisk yet, but i will add init.d support in next version.
I don't mind it. Just don't forget credits.
Click to expand...
Click to collapse
my work on cm10 boot was stuck on ramdisk issue. i posted a last_kmsg which showed that kernel booted but ramdisk had issues.
i dont understand kernel issues very well, but hope to get it working now that you are here. i'll ask for ur help from time to time.
plus, i want to take permission to use ur kernel tree for building cm9/10 from source. dont wanna use prebuilt now.
last thing, what is the difference between an ics n jb kernel, exactly what needs to be modified to make it work?....
thanks
neXus PRIME said:
my work on cm10 boot was stuck on ramdisk issue. i posted a last_kmsg which showed that kernel booted but ramdisk had issues.
i dont understand kernel issues very well, but hope to get it working now that you are here. i'll ask for ur help from time to time.
plus, i want to take permission to use ur kernel tree for building cm9/10 from source. dont wanna use prebuilt now.
last thing, what is the difference between an ics n jb kernel, exactly what needs to be modified to make it work?....
thanks
Click to expand...
Click to collapse
Ramdisk(sorry couldnt resist) among other things but for initial booting ramdisk.
PS might not be the best person to answer though...
Re: [KERNEL]Tweaked kernel 1.0[10/02/2013]
Dark Passenger said:
not a kernel feature requires correct media codecs.
Edit : @Dev congrats First custom kernel for this device(max safe oc for this processor is 1.5GHz just saying) also a request can you add ROW IO sheduler heard its better than SIO also PegasusQ/D governer.In next release.
Thank you.
Click to expand...
Click to collapse
Qualcomm S4 Play is made for speed 1-1.2GHz, and that's the safe range of frequencies. Remember that this is ARM-cortex A5 not Krait, and more than 1.2 can really harm it.
hi
Dark Passenger said:
Ramdisk(sorry couldnt resist) among other things but for initial booting ramdisk.
PS might not be the best person to answer though...
Click to expand...
Click to collapse
I know ramdisk, but let me rephrase my question, what exactly (in ramdisk) needs to be modified and how, to make it work on jb. Anyways, i'm still figuring things out by trial n error so progress is very very slow. The logcat was the only thing i ever got to which showed the cm10 logo as well but then, everything MESSED up. Havent been able to replicate that result since.
Re: [KERNEL]Tweaked kernel 1.0[10/02/2013]
Can you include this?? http://forum.xda-developers.com/showthread.php?p=37683529
Sent from my HTC branded muffin...
neXus PRIME said:
my work on cm10 boot was stuck on ramdisk issue. i posted a last_kmsg which showed that kernel booted but ramdisk had issues.
i dont understand kernel issues very well, but hope to get it working now that you are here. i'll ask for ur help from time to time.
plus, i want to take permission to use ur kernel tree for building cm9/10 from source. dont wanna use prebuilt now.
last thing, what is the difference between an ics n jb kernel, exactly what needs to be modified to make it work?....
thanks
Click to expand...
Click to collapse
The difference isn't just in ics and jb. the difference is in cm and sense ramdisk too. I don't know what need modify yet, but i will start the work with cm later when i have enough free time.
Feel free to use my sources.
nlooooo said:
Qualcomm S4 Play is made for speed 1-1.2GHz, and that's the safe range of frequencies. Remember that this is ARM-cortex A5 not Krait, and more than 1.2 can really harm it.
Click to expand...
Click to collapse
my bad edited.seems mixed it up.
So happy to hear such good news for the DesireX! Finally the developing for this device is becoming richer first of all, thank you for this custom kernel and thanks nexus prime for his effort to port the CM series I'm not an expert but yeah, sense and AOSP/AOKP Roms need different kernels. To learn more I think that Dennis Rassmann (the creator of the famous Bricked kernel series) or faux can answer your question about ramdisk, if you contact them (they are really kind and gentle). After that I would like to ask if it's possible to add the useful sweep2wake function to this kernel, in future. For now, good work guys, never give up!!!
Hello! This is my first thread, ever, on any forum so please don't bash me if I forget something .
I've decide to make a kernel for the SGP 5.0 for Gingerbread because I loved Entropy512's, but I was slightly jelous of the INTL users and all their new givernors and I/O schedulers. Soooo i used Entropy512's sources and borrowed rumirand's schedulers and governors and tossed in a 1.4 GHz OC and a few cherry picks from KOala888 and voila!
Current features:
O3 optimization
battery pooling - 60sec (KOala888)
touchscreen responsivness tweaked (KOala888)
Screen UV (KOala888)
2.6.35.7 source for GingerBread.
Unsecure mode.
Swap support.
Overclock to 1.4Ghz and undervolt capabilities (use SetCPU or another software for UV).
Added lazy (default), interactive, interactiveX, smartassv2, ondemandX governors.
Added BFQ, V(R) and SIO (default) schedulers.
Init.d support.
Added statically linked busybox 1.19.3 (/sbin)*.
Modified adbd (pointing shell to /sbin/sh), so you can use adbd even if you don't have any partition working.
ext4 support (ghetto lagfix).
ClockWorkMod. Nandroid backup - restore works, mount/umount, format (formats to ext4).
CIFS support.
jhash3.
SoD patch from netarchy/coolbho3k.
TinyRCU.
netarchy's conservative tuning patch.
Custom bootanimation support (/system/media/bootanimation.zip) from Entropy512's kernel.
Per-File fsync() disable
Charginghacks from Entropy512.
I may release a 1.2 GHz version if the community finds 1.4 too unstable.
If there is anything i forgot please tell me!
Download USA
Download INTL
Almost forgot my sources: https://github.com/augiem94/linux_kernel_galaxyplayer
Feature requests are welcome!
Credits:
Entropy512-his sources and his handy build script! Saved me a TON of hassle
rumirand-for his sources
KOala888-for his tweaks
koxudaxi-for his OC settings
I've got Entropy's kernel on my player, and I keep having random freezes. For instance, I'll be typing or scrolling and thing go completely unresponsive for a second or two. I'm not sure if it's a governor thing or what (I've turned off overclocking to see if that helped, but it doesn't seem to have made any difference).
Do I just have a bad install of Entropy's, or is this something everyone has? Would flashing this kernel likely to fix those issues? Can I flash without re-installing my ROM (Gingerbread Based)? Are there any issues I should know about before applying this kernel?
Dr. Cyanide said:
I've got Entropy's kernel on my player, and I keep having random freezes. For instance, I'll be typing or scrolling and thing go completely unresponsive for a second or two. I'm not sure if it's a governor thing or what (I've turned off overclocking to see if that helped, but it doesn't seem to have made any difference).
Do I just have a bad install of Entropy's, or is this something everyone has? Would flashing this kernel likely to fix those issues? Can I flash without re-installing my ROM (Gingerbread Based)? Are there any issues I should know about before applying this kernel?
Click to expand...
Click to collapse
I had the same problem, i could never diagnose the source, but so far i havent had it once with the 1.4GHz OC. if you do get that problem tell me and ill look into it further .
EDIT: Problem still exists, if anyone has an idea what it is please tell me. I believe Mevordel had a theory a while back it was due to facebook being a rogue app and causing it. Feedback on this theory will be greatly appreciated!
EDIT2: Facebook does not appear to be the culprit.
augiem94 said:
I had the same problem, i could never diagnose the source, but so far i havent had it once with the 1.4GHz OC. if you do get that problem tell me and ill look into it further .
Click to expand...
Click to collapse
Well, I've flashed it now. Here's to hoping it's smooth sailing from here on out
I ran this kernel almost all day yesterday. Visually, things in the UI don't look much faster (probably because of the lack of GB hardware acceleration, and Project Butter), but a few 3D games run noticeably better. Those random pauses that occur, especially when typing on a keyboard, have seemed to also disappear. Thanks for making Gingerbread a bit better to use for those of us that can't let it go completely just yet!
I likewise ran all day, and didn't see any issues. I'm optimistic they're gone now. I never install Facebook, to further disprove that theory.
General question lol is it possible to compile gingerbread kernels with a Linaro toolchain?
Sent From My USA Galaxy Player 5.0
augiem94 said:
General question lol is it possible to compile gingerbread kernels with a Linaro toolchain?
Sent From My USA Galaxy Player 5.0
Click to expand...
Click to collapse
Of course But you may get compile errors when building with Linaro, in which case you will need to solve them. There are also a few other things to worry about with Linaro, else you may solve the errors and get the kernel to compile and it won't boot.
Thank you! I am a going to load this right now. Thanks for including smartassV2 in governors. The main reason I used INTL r14 over Entropy.
Edit: 8:50 pm.
Cannot load over clock module from Tegrak. When I try to load the module and change the OC to 1.152 (which I find most stable on my player) the player will reboot. 1.2 and 1.4 seem to be the only option for OC. Been running at 1.2 for now with no issues. 1.4 seemed to run too hot.
YP-G70 USA
R.E.D.D ROM
Rumirand r14 INTL Kernel on YP-G70 USA device
I Like Turtles.
1.152 OC
:fingers-crossed:
HOG1csmith said:
Thank you! I am a going to load this right now. Thanks for including smartassV2 in governors. The main reason I used INTL r14 over Entropy.
Edit: 8:50 pm.
Cannot load over clock module from Tegrak. When I try to load the module and change the OC to 1.152 (which I find most stable on my player) the player will reboot. 1.2 and 1.4 seem to be the only option for OC. Been running at 1.2 for now with no issues. 1.4 seemed to run too hot.
YP-G70 USA
R.E.D.D ROM
Rumirand r14 INTL Kernel on YP-G70 USA device
I Like Turtles.
1.152 OC
Click to expand...
Click to collapse
Same problem here with Tegrak, I'll try to get it sorted out in the next release.
EDIT: I got the module to load i think, but the device reboots directly after. It reboots after the Load Module button greys though so I'm fairly sure its loading
EDIT2: It loads if i set the max frequency to 1.2GHz from No Frills, but if i change it back to 1.4 after its loaded it reboots. Getting there .
it can't get "too" hot from technical side
Wysyłane z mojego YP-G70 za pomocą Tapatalk 2
augiem94 said:
:fingers-crossed:
Same problem here with Tegrak, I'll try to get it sorted out in the next release.
Click to expand...
Click to collapse
You probably can't load the tegrak module because the vermagic is different
android1234567 said:
You probably can't load the tegrak module because the vermagic is different
Click to expand...
Click to collapse
Im really new to the dev scene, mind explaining?
Sent From My USA Galaxy Player 5.0
augiem94 said:
Im really new to the dev scene, mind explaining?
Sent From My USA Galaxy Player 5.0
Click to expand...
Click to collapse
The tegrak module and the kernel have version names in them and the module will only load when the version inside said module matches the version of the kernel. Basically, they need to have the same name. There's some nice info on this here: http://www.tldp.org/LDP/lkmpg/2.6/html/x380.html
android1234567 said:
The tegrak module and the kernel have version names in them and the module will only load when the version inside said module matches the version of the kernel. Basically, they need to have the same name. There's some nice info on this here: http://www.tldp.org/LDP/lkmpg/2.6/html/x380.html
Click to expand...
Click to collapse
Forgive me if im being numb, but i havent changed the version in the makefile at all.
Sent From My USA Galaxy Player 5.0
After using it for a few days now,it seems that scrolling still sometimes locks up. I haven't noticed any issues with typing yet, but that could be not using it at the right time.
Sent from my YP-G70 using xda app-developers app
I've been using this on 1.2 GHz for over a week and it is great.
No persistent issues.
Thanks for the kernel!
I appreciate your work.
YP-G70 USA
R.E.D.D ROM
AC Kernel
augiem94 said:
Forgive me if im being numb, but i havent changed the version in the makefile at all.
Sent From My USA Galaxy Player 5.0
Click to expand...
Click to collapse
It's not the version of the version but the localversion (normally it is 2.6.35.7-XXXXX) The X represents the local version. You can modify the module to actually make it work with the kernel or in your case modify the localversion specified in the defconfig.
Thank you so much for this Kernel!!!! I am loving the 1.4 Ghz. Smooth sailing so far. Once again thanks!
Q&A for [KERNEL][Apolo JB 4.14,New 7.1][SAMMY ROMS and AOSP]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
How to built my own version
This kernel is wonderful. But if the among of apps grows up, the system will become slowly and stucky. I want to add zram and memory merge support for this kernel. However, I don't know what to use that source that posted on github for doing this. Apolo 7.1 seems doesn't have a kernel repository, but just a init repository? What should I do? I am new in making kernel. Thanks.
My huge thanks to the developers of this amazing Kernel. I really appreciate your work. It works perfect with NeatRom 8 ! Thank you.
Apolo Kernel Config
Hey guys I'm using KK Neatrom V8.0st with KERNEL Apolo_7.1_CM_Regular. What is the best of scheduler/governor for this rom?
Apolo voltage versions - I still don't understand
Ok, I've read OP and searched relevant replies and I still don't get what's the real difference between particular Apolo voltage versions and the difference between flashing another version and just setting corresponding voltage presets in configurator app.
So, there are CPU, GPU and "internals" voltages. In Regular and Extreme GPU and internal are set to -50mV (according to OP), so there is no difference in these. The only difference seems to be in CPU voltages - which can easily be set in app. Where is the catch?
Yesterday I also made an interesting investigation (maybe relevant to this question). I had an issue with wifi not working with Apolo/NeatRom combination. Apolo Regular worked fine but Extreme V0 didn't, other conditions being absolutely equal. I can understand that lower voltage may lead to certain parts of the SoC not working properly. But again - the internal voltages are the same in Reg and V0. (This problem was solved by clean reflash of ROM and kernel.)
Edit: OK, I now read the OP one more time and found Voltages PDF. This explains everything....
nalott said:
Ok, I've read OP and searched relevant replies and I still don't get what's the real difference between particular Apolo voltage versions and the difference between flashing another version and just setting corresponding voltage presets in configurator app.
So, there are CPU, GPU and "internals" voltages. In Regular and Extreme GPU and internal are set to -50mV (according to OP), so there is no difference in these. The only difference seems to be in CPU voltages - which can easily be set in app. Where is the catch?
Yesterday I also made an interesting investigation (maybe relevant to this question). I had an issue with wifi not working with Apolo/NeatRom combination. Apolo Regular worked fine but Extreme V0 didn't, other conditions being absolutely equal. I can understand that lower voltage may lead to certain parts of the SoC not working properly. But again - the internal voltages are the same in Reg and V0. (This problem was solved by clean reflash of ROM and kernel.)
Edit: OK, I now read the OP one more time and found Voltages PDF. This explains everything....
Click to expand...
Click to collapse
Please give the link for PDF File
Esk_maghdouni said:
Please give the link for PDF File
Click to expand...
Click to collapse
Press the button under "More information and Voltages values" heading in the OP. The whole hidden text under this button is interesting and there is also the link you need.
Esk_maghdouni said:
Hey guys I'm using KK Neatrom V8.0st with KERNEL Apolo_7.1_CM_Regular. What is the best of scheduler/governor for this rom?
Click to expand...
Click to collapse
OK now I choosed sio/zzmoove. It seems to be good Config. Anybody has another idea? please advise.
nalott said:
Press the button under "More information and Voltages values" heading in the OP. The whole hidden text under this button is interesting and there is also the link you need.
Click to expand...
Click to collapse
Thanks mate
tar file
where can i find tar file for this kernel so i can use with odin?
It works perfect with NeatRom 8 ! Thank you.:angel:
I cannot find BFQ I/O in your new kitkat version anymore , it is something wrong with it?
- SPEEDUP KEYRESUME (Faster wake up at power button and incoming call)
Click to expand...
Click to collapse
No improvements for me. Still ~2 sec delay.
Anyone felt the difference?
[ROM][5.0.1][I9100] CyanogenMod 12 [ALPHA][12/22]
I have an internal memory of 12 GB problem instead I only 1.89 GO
thank you
@pedestre : would you consider making cpu thermal limits editable? Also, the "ZEN" i/o is pretty decent, should you want to check it out.
Sent from my GT-I9100 using XDA Free mobile app
Break the wifi on slimsaber
Hi, the latest beta (7.2 beta 3) installed over SlimSaber 21/12 breaks the wifi and i can turn it on. Any workaround? thanks.
7.2 beta 3 OMNI (zeitferne fix) works OK
I am on the 7.2 beta 3 OMNI version of your kernel (with zeitferne fix) since 24h now.
Everything works OK, very smooth. Not a single problem so far.
Thanks for bringing back the BFQ i/o in your 7.2 beta 3 , Keep it up!
zzmoove + BFQ = Awesome
Fix for Fuse bug in 4.x branch ?
I see that 4.X branch beta 2 does not have fuse bug included. Is it possible to add this?
geoff10 said:
where can i find tar file for this kernel so i can use with odin?
Click to expand...
Click to collapse
Hey guys,
Is it possible to get .tar files of the latest KitKat or Lollipop versions of this wonderful kernel that are flashable via Odin? Would love to use them in order to install Lollipop on my phone.
Thanks in advance and best regards
Edit: A user from a German Android Forum (www.android-hilfe.de) was so kind to create and provide the different kernel versions as .tar files for Odin. Here goes the link. Thanks a lot to KST66!
Edit 2: Also just saw that @gsstudios provided the .tar files in the development thread. Thanks a lot to him as well!