Related
Hello,
Every once in a while my Samsung Galaxy SII I9100 with Android 4.1.2 hangs up, and after that it goes in the bootloop on power on. And I know that hard reset is a solution to this problem. But it happened to me lately like 4 times and I really HATE losing my data from apps and settings like this. Is there any way to fix it WITHOUT the need to hard reset? I tried the "soft reset" but it didn' t solve the problem. Every time it is like this - the phone hangs up (usually overnight), I turn it off and then on and suddenly it is in a bootloop. I can access the Recovery and Download modes.
Phitherek_ said:
Hello,
Every once in a while my Samsung Galaxy SII I9100 with Android 4.1.2 hangs up, and after that it goes in the bootloop on power on. And I know that hard reset is a solution to this problem. But it happened to me lately like 4 times and I really HATE losing my data from apps and settings like this. Is there any way to fix it WITHOUT the need to hard reset? I tried the "soft reset" but it didn' t solve the problem. Every time it is like this - the phone hangs up (usually overnight), I turn it off and then on and suddenly it is in a bootloop. I can access the Recovery and Download modes.
Click to expand...
Click to collapse
Have you tried to change kernel see if that helps? Philz is stock solid kernel no probs my end.
Had a similar problem with a Dorimanx build late last yr (forget which build exactly), every couple of weeks the same issue as you're having.
My solution ? Make regular nandroid backups (at the very least weekly, more often if you're updating apps/making changes to your setup a lot or if the problem is happening really often), and restore same whenever you have the bootloop problem.
Worked for me until the problem went away with a different build.
Edit - Or you can do what Andrew suggested & try another kernel/different build of the same kernel (If you're going to stick with the same kernel, tell the dev/pull a logcat or whatever & give that to them).
andrewwright said:
Have you tried to change kernel see if that helps? Philz is stock solid kernel no probs my end.
Click to expand...
Click to collapse
Actually I never tried to change the kernel, I am now using Samsung' s original 4.1.2 firmware. Thank you for suggestion.
MistahBungle said:
Had a similar problem with a Dorimanx build late last yr (forget which build exactly), every couple of weeks the same issue as you're having.
My solution ? Make regular nandroid backups (at the very least weekly, more often if you're updating apps/making changes to your setup a lot or if the problem is happening really often), and restore same whenever you have the bootloop problem.
Worked for me until the problem went away with a different build.
Edit - Or you can do what Andrew suggested & try another kernel/different build of the same kernel (If you're going to stick with the same kernel, tell the dev/pull a logcat or whatever & give that to them).
Click to expand...
Click to collapse
Thank you for suggestion, however my device is not rooted (yet?), so I cannot use nandroid.
Flash with philz kernel and it will be I love team work Mb :thumbup:
Running pure stock, your options are basically zero short of doing a factory reset, which may not solve the issue. You could do a clean install of stock via Odin, but if you're going to go down that path you may as well go the whole hog & root the phone (you don't necessarily have to run a custom kernel/rom if you don't want to; plenty of people run rooted stock) and receive the benefits of same (I.E the ability to make nandroid backups - much better than any other option Samsung has ever come up with).
Thank you for redirecting me to PhilZ kernel. However, I do not know which version I have to download for the Polish firmware (XXMS1), could you clarify?
Also, I have found a Siyah kernel in my search, flashed beta4 but it does not work for me, should I try with beta5? And is it a good kernel?
Siyah v6.0b5 will work and philz lsw will work siyah is very good so is philz
I had exactly the same problem this morning.My phone originally had omega v23 (with philz) installed, but it kept running hot all the time, so I flashed stock 4.1.2 xwlsw with mobile odin and everroot. My question now is should I unroot my f/w before flashing philz kernel?
No just flash it will do as its told :thumbup:
andrewwright said:
No just flash it will do as its told :thumbup:
Click to expand...
Click to collapse
thanks. In the meantime I've doing some reading and somewhere in the depth of the philz kernel thread was a post buried, where some recommended to flash the tar file via mop. That's what I've done. It seems to have worked.
But it's running hot again. I had that before with the philz kernel, but that belongs in another thread
Ok but give it 20 mins atleast to settle down. The only kernel other than apollo that keeps my phone cool :thumbup:
andrewwright said:
Ok but give it 20 mins atleast to settle down. The only kernel other than apollo that keeps my phone cool :thumbup:
Click to expand...
Click to collapse
Dumb question, but I find I need to flash apolo, can I just go ahead and flash it in recovery over philz or is there something I need to look out for. Also I've read about scripts for cleaning up busybox and previous kernels? this is all very confusing
Use gs2 kernel wipe script flash script first then flash dif kernel.
this
Ok, I probably accidentaly found a cause of this problem. I had Facebook information on my lock screen and when I tried to refresh it my phone went on bootloop. So probably it is the issue with the information module of the lock screen (or maybe it was just a coincidence, if so, I will let you know). I think everyone with XWLSE firmware should consider disabling this feature. Btw. really thank you guys for PhilZ recovery + root kernel and Online Nandroid Backup suggestions, they are great .
This is my first post here so please excuse any violation of rules.
So, I was running CWM recovery + Siyah kernel + CM10.1 + Touchwiz 4.1.2 (dual boot setup) perfectly fine on my Galaxy s 3 for almost a year. But yesterday I decided to update all of those and updated to latest CWM using ROM manager, then changed the kernel to googy max2 and installed CM11. Everything worked properly except that my phone would freeze or hang up randomly at any time(whether swiping through homescreens or updating apps or even during standby). So I changed my ROM to S4 Revoution ROM (tried with both googy max2 and devil kernel). However, even this ROM gave me same hangup problems. So I moved onto TWRP recovery+ OmniRom but still encountered the same problem multiple times. After getting tired of wasting so much time, I came back to my original setup of CWM+Siyah kernel+CM10.1 thinking I wouldn't face this problem again, but to my aghast, the phone would still freeze randomly. Only a power button reboot would help. Please help, I have no idea what might be causing the problem as I have successfully tried every combination of recovery, kernel and ROM but to no avail. And no, I never manually tinkered with any CPU/GPU frequencies or voltages. Your time and help is greatly appreciated, Thank you.
PS: One more very important thing I forgot to mention, CPU-Z shows most of the time all 4 cores of the CPU stay at 1400MHz even though minimum speed is 200MHz. I have noticed this in S4 revolution ROM with googy max2 kernel and pegasusq governor(currently using this setup on my phone). Also, the "devil kernel" app on this ROM shows CPU either stays in deep sleep mode or 1300-1400MHz frequency.
Can't take screenshot for some reason in this ROM otherwise I would have uploaded those too. Thank you.
newoverhere said:
This is my first post here so please excuse any violation of rules.
So, I was running CWM recovery + Siyah kernel + CM10.1 + Touchwiz 4.1.2 (dual boot setup) perfectly fine on my Galaxy s 3 for almost a year. But yesterday I decided to update all of those and updated to latest CWM using ROM manager, then changed the kernel to googy max2 and installed CM11. Everything worked properly except that my phone would freeze or hang up randomly at any time(whether swiping through homescreens or updating apps or even during standby). So I changed my ROM to S4 Revoution ROM (tried with both googy max2 and devil kernel). However, even this ROM gave me same hangup problems. So I moved onto TWRP recovery+ OmniRom but still encountered the same problem multiple times. After getting tired of wasting so much time, I came back to my original setup of CWM+Siyah kernel+CM10.1 thinking I wouldn't face this problem again, but to my aghast, the phone would still freeze randomly. Only a power button reboot would help. Please help, I have no idea what might be causing the problem as I have successfully tried every combination of recovery, kernel and ROM but to no avail. And no, I never manually tinkered with any CPU/GPU frequencies or voltages. Your time and help is greatly appreciated, Thank you.
Click to expand...
Click to collapse
Did you do a complete wipe before installing all these roms? Wipe Dalvik Cache and Cache partition. I am running WanamLite 7.3 with stock kernel and Wanam Xposed. Here is the link to the rom - http://forum.xda-developers.com/showthread.php?t=1705866
Reboot into custom recovery. Do a full wipe, even though this rom says that it is not necessary but it is always a good idea to do a full wipe before flashing. Try this out and let's try to fix your problem.
Hamza18 said:
Did you do a complete wipe before installing all these roms? Wipe Dalvik Cache and Cache partition. I am running WanamLite 7.3 with stock kernel and Wanam Xposed. Here is the link to the rom - http://forum.xda-developers.com/showthread.php?t=1705866
Reboot into custom recovery. Do a full wipe, even though this rom says that it is not necessary but it is always a good idea to do a full wipe before flashing. Try this out and let's try to fix your problem.
Click to expand...
Click to collapse
Yes, and not just once, but every time I flashed a new ROM. I'm thinking my only option now is to unroot and go back to stock but i am unable to find my country's rom. (found one on sammobile but the download speed refuses to go beyond 2-3kbps).
One more very important thing I forgot to mention, CPU-Z shows most of the time all 4 cores of the CPU stay at 1400MHz even though minimum speed is 200MHz. I have noticed this in S4 revolution ROM with googy max2 kernel and pegasusq governor. Also, the "devil kernel" app on this ROM shows CPU either stays in deep sleep mode or 1300-1400MHz frequency.
Can't take screenshot for some reason in this ROM otherwise I would have uploaded those too. Thank you.
newoverhere said:
One more very important thing I forgot to mention, CPU-Z shows most of the time all 4 cores of the CPU stay at 1400MHz even though minimum speed is 200MHz. I have noticed this in S4 revolution ROM with googy max2 kernel and pegasusq governor. Also, the "devil kernel" app on this ROM shows CPU either stays in deep sleep mode or 1300-1400MHz frequency.
Can't take screenshot for some reason in this ROM otherwise I would have uploaded those too. Thank you.
Click to expand...
Click to collapse
Try WanamLite 7.3. Use the link I gave. And install it after doing a complete wipe. See if that makes a difference.
Hamza18 said:
Try WanamLite 7.3. Use the link I gave. And install it after doing a complete wipe. See if that makes a difference.
Click to expand...
Click to collapse
Thank you for the suggestion but i'm afraid that would not help as i have already tried 4 different roms, one of which i used for a year without any problem, but still facing the hangup only since yesterday. plus, I have gone through enough trouble restoring my accounts/apps/contacts and all (especially whatsapp) again and again for the whole of yesterday every time i flashed a new rom. the problem is not related to the rom. thank you, again.
pertsky makes
newoverhere said:
Thank you for the suggestion but i'm afraid that would not help as i have already tried 4 different roms, one of which i used for a year without any problem, but still facing the hangup only since yesterday. plus, I have gone through enough trouble restoring my accounts/apps/contacts and all (especially whatsapp) again and again for the whole of yesterday every time i flashed a new rom. the problem is not related to the rom. thank you, again.
Click to expand...
Click to collapse
See, most of the things in your phone are software related. It is very very rare that you might have damaged the hardware. I see mismanagement of the resources by the ROM or kernel in your phone. What are the steps you are doing when installing a new ROM and which custom recovery are you using?
Full wipe flash stock rom and test ,
Read the FREEZING sticky and SDS sticky .
JJEgan said:
Full wipe flash stock rom and test ,
Read the FREEZING sticky and SDS sticky .
Click to expand...
Click to collapse
I did a full wipe, flashed everything again, did the emmc check as well as the dummy file generator thing....the hangups have reduced to 2-3 per day from 2-3 per hour but are still there. Should I downgrade my cwm recovery?
If you are rooted try the COMPLETE unrooting procedure mentioned at various places by flashing the latest stock firmware available from sammobile. This is to make sure your device software is like brand new. Test it for at least a day. Do a mega wipe (erasing everything even on internal SD card) before which can fix it in some cases.
When rooting again make sure you have the most bug free version of the recovery. CWM 6.0.4.4 is known to have minor problems here and there but nothing concerning to this topic.
~DemonLord~ said:
If you are rooted try the COMPLETE unrooting procedure mentioned at various places by flashing the latest stock firmware available from sammobile. This is to make sure your device software is like brand new. Test it for at least a day. Do a mega wipe (erasing everything even on internal SD card) before which can fix it in some cases.
When rooting again make sure you have the most bug free version of the recovery. CWM 6.0.4.4 is known to have minor problems here and there but nothing concerning to this topic.
Click to expand...
Click to collapse
Hi guys, I experience the same problems: I'm in any app and I press home to go back to the home menu => my phone's freezing for 5 seconds and then I see all my icons/folders/widgets slowly appearing. I would like to know how to complete format my internal SD card like you said. Thanks in advance.
by pressing the powerkey+homebutton+volume up for about 8-10 seconds you are taken to a recovery menu. You can choose to factory reset over there. That fixed problems in most cases. The only way to wipe the internal partition as well would be to install stock firmware which is a part of unrooting, this will erase everything and put a original rom in your phone.. You can follow the unrooting processes written in many posts in xda
Ok thanks for this quick answer ! So the only way to erase the internal SD card is the unrooting method?
Radder124 said:
Ok thanks for this quick answer ! So the only way to erase the internal SD card is the unrooting method?
Click to expand...
Click to collapse
As far as i know yes. Its not any trouble at all, wont take much time, except the firmware you would have to download. Its not needed in most cases. As i said before you may only need a factory reset so try that before! And just hit the thanks button
Welcome to wilson3q's CM12 Unoffical Build!
As requested by some users, I started to build cm12 for I605. I don't own a I605, please help to test. If you like my work, you can donate here.
Disclaimer: I take no responsibility for bad things that happen as a result of flashing this.
My kernel source is standard cm12 kernel without any modifications.
SaberMod tool chain source is HERE.
All the rests are pretty standard cm12 stuffs, except a few patches I applied on top of them.
[Download]
ROM (please don't mirror):
build - 20150513
build - 20150602
Gapp:
http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
Recommended launcher:
Nova Launcher (really like its JB zoom app animation, hate L slide up animation)
Recommended theme:
Deep Darkness
If you need enable soft buttons, flash this: View attachment softkeys.zip or soft+hardkeys.zip
[Flashing Guide]
1. Reboot to CWM/TWRP recovery
2. Flash ROM zip file
3. Flash Gapps
4. Reboot
* Wipe data first if you come from another rom *
* Newer boot loader, modem and recovery is highly recommended (don't use twrp 2.8.4, use 2.8.1 instead) *
* No other kernel will be supported, use the stock one, for your best experiences too *
[Patches]
My additional patches over cm12 includes:
Enhancements and bug fixes cherry-picked from other ROMs, including Slim LP, Nameless
SaberMod for ROM and kernel
O3, JustArchi optimization
Pthread enabled & strict aliasing
Latest sqlite db library
Added Boeffla sound engine 1.67
Added CPU governor zzmoove, smartassv2, savagedzen
Added io scheduler row, bfq, zen, vr
Disabled some useless Samsung processes
Fixed GPS
Fixed low in call volume
Video playback forward/backward fix
Removed all kernel debuging stuffs
Fixed keyboard not showing up during setup wizard
Fixed a crash of music app
Changed DPI to 280
Fixed Camera issue
Fixed Day Dream
Fixed Netflix streaming (one more reboot needed after installation of Netflix)
Enabled Multi-user
LMK minfree tweaks
Misc tweaks
more...
For better experience, change Nova animation/scroll speed to Fast...
[Known Bugs]
I am not sure what issues you will get, but one thing is for sure: YOUR PHONE WILL FLY!
chrome glitch: type chrome://flags as URL and disable GPU thank @bigmarv31)
Thank cm team for the amazing ROM.
Thank sabermod for the amazing toolchain.
Special thanks to: @DerTeufel1980, @sbrissen, @rogersb11, @TheBr0ken, @DreamFX, @frankie...
[Screenshots]
Always nice to see a new thread for i605. This doesn't happen often. Thank you!
Thanks again for building this for us we all appreciate it!
will be testing this out and see how it spars. thanks for this! I was going to try and "port" it over from the t0lte with replacing some libs and such, lol.
Thank you! I'm downloading right now. Looking like a slow day at work, so why not?
Downloaded files. Backed everything up. Rebooted to recovery. Wiped / Factory Reset using TWRP. Installed both zips sequentially. Apprehensive when I rebooted. Took a couple of minutes of sweating watching the CM Logo swirl around, and then bam! I'm up and running Lollipop. I'll update soon...
UPDATE
thefinancemaster said:
Downloaded files. Backed everything up. Rebooted to recovery. Wiped / Factory Reset using TWRP. Installed both zips sequentially. Apprehensive when I rebooted. Took a couple of minutes of sweating watching the CM Logo swirl around, and then bam! I'm up and running Lollipop. I'll update soon...
Click to expand...
Click to collapse
So, I've got it up and running. It's fast and smooth, but there's a couple of glaring issues stopping me from testing any farther. The first screen that comes up after you initially select your language, is a new (to me) "Activating Cellular Service" screen. It has a message on the screen saying this "can take up to 5 minutes". I let it go for longer than that, but I got an error that it was unable to activate and I was able to try again, or skip it. I'll skip it for now just to see how the rest of the ROM works. Next screen is Wifi login, works fine., but you still have to hit "skip" even after you sign in to wifi.
Then it checks connections, for updates, etc and I keep getting the error that google play services has stopped. I haven't even logged into it yet...
Next screen is Tap N Go. Option to transfer all of your stuff off your old phone using NFC. Great idea, but I'm not testing because my new phone IS my old phone.
Then, it's google login time. Worked fine, standard stuff we're used to with options to download/backup your apps using google. It takes a minute here, and I kept getting popups about all of the google apps stopping, each individually. Annoying a bit... I hit the "RESTORE" option, this is my second try, and the first time I didn't have Root, so I couldn't download Titanium to restore everything. I also skipped the google restore last time, so I tried it this time. This is a new screen for me, but it takes me to a "Restoring" screen for a bit. It's not as annoying as on previous Android versions, having to individually approve each app that was updating/downloading. I keep getting the popups about one Google app or another stopping.
I get past the restore page, and the phone locks up. Reboot... After reboot, I have to go into the play store to download Titanium. It seems quite a few apps were restored by Google, but not all. I looked at the "My Apps" section of the play store, and there's a ton of apps cued up to download. It's what I was trying to avoid... So I hit "Stop" at the top, and it stops them all.
**I mentioned earlier that this is my 2nd try, the first try was about the same, but I didn't have root access. I downloaded SuperSU, but it wouldn't update the binaries, so it was useless. I tried SuperUser, it didn't work either. So, I rebooted to recovery, wiped, flashed the ROM, GApps, and the SuperSU zip I had saved on my SD card from my previous Omni Rom. Then I rebooted and now you can read what happened.
At this point, I'm having problems downloading Titanium Backup, SuperSU, or anything I really want. The Play Store is hanging and force closing. I can't even open the SuperSU I flashed from TWRP. There must be compatibility issues. I read somewhere that Lollipop has issues with root somehow, but I'm not sure. On my first try, I was able to download Titanium Backup no problem, but it wouldn't work because I didn't have root access. SuperSU and SuperUser didn't help after downloading. CM has always been pre-rooted on all of the other devices I've installed it on.
For now, I'm just going to restore my backup of Omni Rom and be content with 4.4.4 for now.
I'll try again if anyone can help with actually being on the VZW Network and Root. I didn't get a chance to play with the other stuff in Lollipop yet, but I would love to.
thefinancemaster said:
So, I've got it up and running. It's fast and smooth, but there's a couple of glaring issues stopping me from testing any farther. The first screen that comes up after you initially select your language, is a new (to me) "Activating Cellular Service" screen. It has a message on the screen saying this "can take up to 5 minutes". I let it go for longer than that, but I got an error that it was unable to activate and I was able to try again, or skip it. I'll skip it for now just to see how the rest of the ROM works. Next screen is Wifi login, works fine., but you still have to hit "skip" even after you sign in to wifi.
Then it checks connections, for updates, etc and I keep getting the error that google play services has stopped. I haven't even logged into it yet...
Next screen is Tap N Go. Option to transfer all of your stuff off your old phone using NFC. Great idea, but I'm not testing because my new phone IS my old phone.
Then, it's google login time. Worked fine, standard stuff we're used to with options to download/backup your apps using google. It takes a minute here, and I kept getting popups about all of the google apps stopping, each individually. Annoying a bit... I hit the "RESTORE" option, this is my second try, and the first time I didn't have Root, so I couldn't download Titanium to restore everything. I also skipped the google restore last time, so I tried it this time. This is a new screen for me, but it takes me to a "Restoring" screen for a bit. It's not as annoying as on previous Android versions, having to individually approve each app that was updating/downloading. I keep getting the popups about one Google app or another stopping.
I get past the restore page, and the phone locks up. Reboot... After reboot, I have to go into the play store to download Titanium. It seems quite a few apps were restored by Google, but not all. I looked at the "My Apps" section of the play store, and there's a ton of apps cued up to download. It's what I was trying to avoid... So I hit "Stop" at the top, and it stops them all.
**I mentioned earlier that this is my 2nd try, the first try was about the same, but I didn't have root access. I downloaded SuperSU, but it wouldn't update the binaries, so it was useless. I tried SuperUser, it didn't work either. So, I rebooted to recovery, wiped, flashed the ROM, GApps, and the SuperSU zip I had saved on my SD card from my previous Omni Rom. Then I rebooted and now you can read what happened.
At this point, I'm having problems downloading Titanium Backup, SuperSU, or anything I really want. The Play Store is hanging and force closing. I can't even open the SuperSU I flashed from TWRP. There must be compatibility issues. I read somewhere that Lollipop has issues with root somehow, but I'm not sure. On my first try, I was able to download Titanium Backup no problem, but it wouldn't work because I didn't have root access. SuperSU and SuperUser didn't help after downloading. CM has always been pre-rooted on all of the other devices I've installed it on.
For now, I'm just going to restore my backup of Omni Rom and be content with 4.4.4 for now.
I'll try again if anyone can help with actually being on the VZW Network and Root. I didn't get a chance to play with the other stuff in Lollipop yet, but I would love to.
Click to expand...
Click to collapse
Did you flash the andriod 5 gapps? Do a full wipe?
You also need latest twrp recovery or philz touch recovery...
baseband unknown no data
bigmarv31 said:
baseband unknown no data
Click to expand...
Click to collapse
Will fix this today.
Keep a close look.
wilson3q said:
Will fix this today.
Keep a close look.
Click to expand...
Click to collapse
Yes Sir Thanks
New build online...
Giving this a try!! Downloading now
Update- Downloaded and installed without any problems. I did have to skip the network verification set-up as it never went anywhere and wifi set-up worked as with setting up my g-mail account,.
Everything seems good except for no service, baseband version still unknown and no service or apn's for data.
going back to Liquid till this gets updated.
LvnInOC said:
Giving this a try!! Downloading now
Update- Downloaded and installed without any problems. I did have to skip the network verification set-up as it never went anywhere and wifi set-up worked as with setting up my g-mail account,.
Everything seems good except for no service, baseband version still unknown and no service or apn's for data.
going back to Liquid till this gets updated.
Click to expand...
Click to collapse
Can you get a logcat?
I guess my proprietary blobs are not correct...
wilson3q said:
Can you get a logcat?
I guess my proprietary blobs are not correct...
Click to expand...
Click to collapse
I already went back to Liquid but I dont mind doing another try at it especially if it would benefit. let me get ir flashed and try to get you the Logcat
. give me a few
---------- Post added at 05:38 AM ---------- Previous post was at 05:10 AM ----------
ok so I got this flashed again strange this time after booting it said no sim card inserted and to insert my sim, it was not out and i skipped and moved to wifi , setup worked all the way and I got a log cat, hope I did it correct as this is new to me. I have to re-flash to Liquid for now so that I have a working phone as I go to work in an hour,
Again let me know if you need any more details
Same on this build baseband unknown so no data
wilson3q said:
Did you flash the andriod 5 gapps? Do a full wipe?
You also need latest twrp recovery or philz touch recovery...
Click to expand...
Click to collapse
Yes, I flashed the gapps from your post. gapps-lp-20141109 is what the file name was. I use TWRP, not sure if it's the latest but it works fine. I always do the "factory reset" wipe option in twrp, because I believe that's a full wipe with one swipe... Now, just to test it out and see if I was doing something wrong, I tried the Liquid Smooth build (latest nightly) from 1/7, and it loaded and booted just fine. Had to flash the ROM, Gapps, GPS Fix, and Super SU (so I can restore my apps in Titanium). It connected to data, and ran me through the setup in a flash. It's working well enough to be a daily driver. Do you have any other suggestions? I'm willing to help if you want me to try something else.
Going to give this a try. Thank you for giving this phone options. It is greatly appreciated.
"Chance Favors the Prepared"
glockman4519 said:
Going to give this a try. Thank you for giving this phone options. It is greatly appreciated.
"Chance Favors the Prepared"
Click to expand...
Click to collapse
You're like me you change roms by the hour.
DreamFX said:
You're like me you change roms by the hour.
Click to expand...
Click to collapse
I love to flash and then go through a process of testing. I actually got 2 gt-n5110s so I could test a couple builds at same time, kind of a back to back comparison.
I would love to pick up another i650 that still has unlocked bootloader for testing that way on this device as well.
Well back to this rom, I couldn't get past the getting data screen and had to abort. I did a clean flash and wiped everything with both philz and TWRP 2.8.3.0. I tried both stock and shift kernels.
Lets face it, I'm a flashaholic. lol.....
"Chances Favors the Prepared"
LineageOS Android Distribution 14
Lineage OS Android Distribution is the continuation of the now discontinued CyanogenMod.
Instructions1. Make a Nandroid backup using TWRP or similar custom recovery if flashing from a different ROM.
2. Download the latest LineageOS ROM (uploading) and copy it to either the internal storage, an SD card, or an OTG usb drive.
3. Download a Nougat (7.1) Google Apps Package (GApps) for ARM devices if desired (OpenGApps recommended).
4. Boot into the custom recovery to flash the ROM and/or GApps .
5. Factory reset if flashing from a different ROM.
XDA:DevDB Information
Unofficial LineageOS, ROM for the Sprint HTC EVO 4G LTE
Contributors
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: HBOOT 2.10.0000 or 2.10.5555
Version Information
Status: Testing
Current Beta Version: lineage-14.1-20170302
Beta Release Date: 2017-03-02
Created 2017-01-22
Last Updated 2017-03-02
I'm going find this phone in one of the shoe box and install this thank you kind sir
Wow Los has finally arrived for the Jewel but my Jewel is no longer with me
I can't seems to use external sdcard as internal there's simply no option to do it while formatting. Other then this it's pretty snappy thanks again.
mecha2012 said:
I can't seems to use external sdcard as internal there's simply no option to do it while formatting. Other then this it's pretty snappy thanks again.
Click to expand...
Click to collapse
Thanks for testing! Try the new Nougat build—I wasn't able to move apps onto the SD card (that is a LineageOS bug), but I was able to format it as internal storage.
I couldn't install the latest build 14.1 well just keeps bootlooping at the HTC screen.
Wipe
Install latest build
Install Gapps 7.1 (tried without installing this also) still no go ?
mecha2012 said:
I couldn't install the latest build 14.1 well just keeps bootlooping at the HTC screen.
Wipe
Install latest build
Install Gapps 7.1 (tried without installing this also) still no go
Click to expand...
Click to collapse
There appears to be an error in the build. I will upload a new build within a day.
Edit: New build has been uploaded! Please report if it works.
Never thought my Jewel would ever see Nougat (let alone Lollipop or Marshmallow). Just flashed and all is working well so far. Awesome work!
God tier work here, I'm blown away. I misplaced my Moto G 3rd gen somewhere in my apartment, so I've given up and dusted off my Evo. I was set to just use the Viper 4.1.1 that was on there, but some apps weren't installing so I came on ol' XDA. This is much more than I expected, thank you.
With that said, any tips on getting this to activate on Sprint / Ting? It was working fine on the old rom, but not kicking in here.
I know this isn't totally related to this ROM, but maybe it can be. I'm having issue with this (and most other ROMs I try) where the per button works physically, but only the buttons light up. I have to press the power button several times to get the screen to wake. This isn't consistent though. Seems worse if the screen has been off for a while. Does anyone know of a fix, and if so, can it be incorporated into this ROM? I know there have other threads about this but it seems like they have been dropped.
idumych said:
God tier work here, I'm blown away. I misplaced my Moto G 3rd gen somewhere in my apartment, so I've given up and dusted off my Evo. I was set to just use the Viper 4.1.1 that was on there, but some apps weren't installing so I came on ol' XDA. This is much more than I expected, thank you.
With that said, any tips on getting this to activate on Sprint / Ting? It was working fine on the old rom, but not kicking in here.
Click to expand...
Click to collapse
I believe that the service must be activated on a stock ROM before flashing a custom ROM. Then, the correct APN has to be set according to the carrier under Settings > More > Cellular networks > Access Point Names.
Schiben said:
I know this isn't totally related to this ROM, but maybe it can be. I'm having issue with this (and most other ROMs I try) where the per button works physically, but only the buttons light up. I have to press the power button several times to get the screen to wake. This isn't consistent though. Seems worse if the screen has been off for a while. Does anyone know of a fix, and if so, can it be incorporated into this ROM? I know there have other threads about this but it seems like they have been dropped.
Click to expand...
Click to collapse
I am not sure of a fix, and I have not encountered this issue, but have you tried enabling Wake device using the Camera button under Settings > Buttons?
VitaTaf said:
I am not sure of a fix, and I have not encountered this issue, but have you tried enabling Wake device using the Camera button under Settings > Buttons?
Click to expand...
Click to collapse
I've tried that in the past. Forgot about it this time around. Tried it again and it seems to be about the same as the actual power button for getting the screen to come on correctly.
Good ol' Jewel. Is this rom working ok?
My wife is temporarily using my old Jewel because she dropped & broke her crappy samsung phone. can someone please tell me how this rom is working?
I appreciate your time!
King of the Couch said:
My wife is temporarily using my old Jewel because she dropped & broke her crappy samsung phone. can someone please tell me how this rom is working?
I appreciate your time!
Click to expand...
Click to collapse
The ROM is working fine for the most part. The battery is not great, but that may be due to the battery's age. Additionally, there is a bug with BoringSSL that sometimes prevents the Play Store or Gmail from working temporarily.
sounds good. yeah, I'm sure it's age. thanks man. take care-
Trouble with WiFi
Did a Full factory reset, installed rom, gapps, and supersu from TWRP, factory wipe again from TWRP; now the OS is installed and running but after connecting to my home network, says no internet access although the netork is up and running normally, all other devices connected. Any thoughts or suggestions. I have a backup of my previous state, so I can revert, but would like to keep this on 7.1 for consistency between this and my primary device. The primary use for this device is media streaming.
keysneptune said:
Did a Full factory reset, installed rom, gapps, and supersu from TWRP, factory wipe again from TWRP; now the OS is installed and running but after connecting to my home network, says no internet access although the netork is up and running normally, all other devices connected. Any thoughts or suggestions. I have a backup of my previous state, so I can revert, but would like to keep this on 7.1 for consistency between this and my primary device. The primary use for this device is media streaming.
Click to expand...
Click to collapse
I believe that the WiFi issue have been fixed in the latest build (20170522).
Thank you for this rom!
I had been using cyanogenmod 5.0 and dirtyunicorns 5.1 both were solid roms. Unfortunately the latest apps seem to run a bit slow on them. I thought it was the device but after installing this rom everything is snappy! It manages 1gig of ram better than any other rom and that 1.5ghz dualcore still runs strong. Snapchat is way more responsive on this rom, instagram and fb run without problems. GPS, 4g, sms, wifi, camera, sd storage, everything works! I've only noticed a few bugs. The wifi activity arrows don't show when something is downloading/uploading but wifi itself does work. Also, even tho I have working active cell service, it tries to activate itself again everytime I reboot and fails but calls-sms-data continue to work lol. The biggest bug is that auto-rotation stops working after 30-60 minutes and it stays stuck on portrait mode. Nothing but a full reboot will get it working again, a quick softboot won't fix it. I've tried changing the rotation settings and also added some lines to the build.prop but no solution thus far. I love this rom so much, if it's not fixed I might try some auto rotation apps. One last thing, it would be cool if the # in the status bar would go away after I close whatever app has root. The previous rom I had did that. Thank you so much to all the developers for bringing life to this phone!
familyjewels said:
I had been using cyanogenmod 5.0 and dirtyunicorns 5.1 both were solid roms. Unfortunately the latest apps seem to run a bit slow on them. I thought it was the device but after installing this rom everything is snappy! It manages 1gig of ram better than any other rom and that 1.5ghz dualcore still runs strong. Snapchat is way more responsive on this rom, instagram and fb run without problems. GPS, 4g, sms, wifi, camera, sd storage, everything works! I've only noticed a few bugs. The wifi activity arrows don't show when something is downloading/uploading but wifi itself does work. Also, even tho I have working active cell service, it tries to activate itself again everytime I reboot and fails but calls-sms-data continue to work lol. The biggest bug is that auto-rotation stops working after 30-60 minutes and it stays stuck on portrait mode. Nothing but a full reboot will get it working again, a quick softboot won't fix it. I've tried changing the rotation settings and also added some lines to the build.prop but no solution thus far. I love this rom so much, if it's not fixed I might try some auto rotation apps. One last thing, it would be cool if the # in the status bar would go away after I close whatever app has root. The previous rom I had did that. Thank you so much to all the developers for bringing life to this phone!
Click to expand...
Click to collapse
Thanks for trying out the ROM! The WiFi activity arrows are intentionally disable on LineageOS. I do not currently have an active cell service on this device, so I am unable to fix the activation bug for now. Could you flash the patch below in recovery and test if autorotation is working properly? It should also enable the option to hide the Superuser icon under "Status bar" > "System icons".
Suggestion of a stable custom ROM and additional info how to "cleanly" install it.
Hello to the community.
I need your help in choosing a stable custom ROM and some info on the steps on how to make a clean install.
I was using a galaxy S3 i9300 with CM11 and TWRP 2.7, 2 years ago. I bought a used htc m8 and put the S3 on the drawer. Last year i turned it on again and used it some time. I checked for updates and without thinking it, i installed cm 13(snapshot). After restarting it, i had the problem with the " trebuchet stopped" and "google play services stopped".After that, i did sth that i don't remember and had the flashing(boot loop?) twrp logo and not being able to boot to the phone. And i put it again in the drawer. Now i want to give it to my little brother and today i took it out again.
Through terminal and adb i booted the phone with the "reboot" command but had the "trebuchet + google play stopped" message again. After some time fiddling around, i flashed the latest version of TWRP with Odin, thinking that i could solve the problem like that but the phone is stuck on the CM logo trying to boot. Even if it boots i think it will show these 2 messages all the time(but it doesn't boot) .
So i want your advice on choosing a good and stable custom ROM to flash, possibly with Odin. The language will be in english and i don't care if it's Android 6 or 7 or 5 as long as it's stable. He will use the phone for basic stuff and not sth too extreme. I remember using CM11 without issues but i know that now there are lots of others roms. Also i want to make the cleanest install to minimise the possibilities of crashes and to give him a clean from everything, phone. But i have forgotten some steps in TWRP.
Thank you in advance and i'm waiting for your suggestions and advice.
The last official stock firmware is probably best as it is the most stable and he won't be able to break it unlike with custom roms.
Beamed in by telepathy.